SDSTPS

Earthwork excavation by mechanical means as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Cutting, bending and placing HYSD/TMT bar of Fe550D reinforcement in foundation/pedestals complete as per drawings and technical specifications for Bars below 36 mm dia including cost and conveyance of all materials (But excluding cost of reinforcement steel, which will be issued free of cost at SDSTPS stores) like binding wire cost, labour charges for shifting, bending, placing & conveyance of free issued materials to the site with a lead of 1 Km etc complete for finished item of work as directed by the Enginer- In-Charge.

Supply and placing of the M35 Design Mix Concrete corresponding to IS 456 using MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials (But excluding cost of cement which will be issued free of cost at SDSTPS stores) like fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with cement content as per IS code from standard suppliers approved by the department including pumping, steel centering, shuttering, laying concrete, vibrating, curing and conveyance of free issued materials to the site with a lead of 1 Km, etc. complete for finished item of work.

Supply, fabrication and erection of the structural steel members with MS angles, channels and MS plate of approved brand as directed by the Engineer in charge and as per approved drawings upto a height of 9.00 meters from ground level, including cost and conveyance of structural steel with grade E250BR as per IS 2062, at all heights, all leads including all safety mesures vide IS code IS-7205 etc., complete for finished item of work as directed by the engineer Incharge.The structural steel items that are to be supplied hall have BIS certification with ISI Mark, ‘Replacement of the members as per approved drawing’ ,Confirming to IS 7215 : 1974’ for fabrication,Confirming to IS 12843 : 1989’ for erection ,Confirming to IS 816 : 1969’ for welding

Supply and fixing of G.I bolts including anchor bolts in foundation with nuts and washers of size M 24 mm dia or below of approved brand and length as directed by the Engineer in charge and as per approved drawings at any height of upto 9.00 meters from ground level, including cost and conveyance with grade 8.8 as per IS 1367 (Part 3), at all heights including all safety mesures vide IS code IS-7205 etc., complete for finished item of work as directed by the engineer Incharge.

Application of 3 coats of paint duly supply the ready mix synthetic enamel to the structural steel frames of various rolled sections up to height 6.00m, with one coat of primer with high build epoxy mastic paint (Smoke grey) followed by one under coat with Glass flake filled epoxy paint (Grey) and one final coat with Ready mixed synthetic enamel paint (Approved color), after thoroughly cleaning the surfcae, with all access scaffolding and safety arrangements such as safety belts and safety ropes etc, including the cost of enamel paint and all labour charges as directed by the engineer incharge. (The paints for primer and under coat (1st& 2nd ) will be issued by the department at free of cost).

Supply and fixing of High Intensity Prismatic Grade Conspicuity Reflective Tape of 50mm width to the strutural steel or concrete members as directed by the engineer Incharge.‘confirming to IRC 67’ ‘Red/White or Yellow/Black colour diagonal strips as directed by Engineer-in-Charge’