PMABHIM

Augoring and boring of holes in site and under reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with augoring and boring equipment as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of different diameter , inclding VRCC M- 25 Designl mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges , seigniorage charges for finished item of work, including centering, shuttering, including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST for 200 kN Pile Capacity.

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Pile Caps

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Plinth beam

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Columns bottom of plinth beam upto Roof level including Basement.

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Roof level beams

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Roof slab 125mm thick

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST - For Inclined slab 110mm thick

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Lintels

Supply and placing of the VRCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20-10mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregated (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrictaion chrages for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST -For Sunshades 0.60 mts wide.

Filling with sand in trenches, sides of foundations with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges etc.,complete for finished item of work (APSS NO.309&310) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for Foundations (APSS No. 402) Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab including Overhead charges & Contractor's Profit @13.615% etc.complete but Excluding Seigniorage charges & GST

Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc., complete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For Basement

Providing High Yield Strength Deformed(HYSD) steel bars (Fe.500-d) as per IS 1786-1985) of 8mm to 20mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved designes and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wirre, cover blocks, hairs,overlaps, spacers, dowels, wastage etc. and all operational, incidental, and labour charges such as cutting, bending,placing in position, tying etc. complete including overhead charges and contractor's profit @13.615% but excluding GST.

Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges,scaffolding and curing etc., complete with a compresive strength not lessthan 50 kg/sqm Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST- For Superstructure walls

Reinforcement brick masonary walls of 11.5cm (4 1/2") thick for partition walls in CM (1:6) prop: using 2nd class bricks having a crushing strength of not less than 35 Kg/Cum2 and using two mild steel bars of 6mm dia in every third layer of brick masonry, with free joints of the main block work including cost and conveyance of all materials and water from approved sources to work site and all operational, incidental labour charges such as scaffolding mixing mortor constructing masonary lift charges, curing etc. but excluding cost of steel and its fabrication charges for finished item of work as per SS 509 including Overheads & Cotractors Profit @13.615% etc., complete but execluding GST and Seigniorage charges

Ornamental Plastering with CM (1:5) 8 mm thick including cost and conveyance of all materials and all labour charges etc., complete including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST. For Super structure

Plastering with CM (1:5) 12 mm thick including cost and conveyance of all materials and all labour charges etc., complete including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST. For Super structure

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water,tiles, but excluding cost and conveyance of all materials etc., complete for finished item of work including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST

Providing Skirting to Internal walls to 15 cm height / Risers of Steps with Vitrified Polished Tiles 8 to 10 mm thick, length equal to flooring tiles set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including Overhead charges & Contractor's Profit @13.615% but excluding Seigniorage charges & GST .

Flooring with Ceramic Tiles set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand water and tiles etc., complete for finished item of work Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Dadooing to walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, fine sand (screened), water, tiles, etc. to site, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete excluding seigniorage charges for finished item of work (APSS No.701 & 707), Including Overhead charges & Contractor's Profit @ 13.615% but excluding seigniorage charges & GST

Supply and Fixing of Best Teak wood Door size 1.20 x 2.10 mts and frame of 75 x 100mm Thick and Z Hold Fasts 9" and MS Buthing 5" - 6 Nos and MS Aldrops 12" - 1 No., MS Towers Bolts 6"-3 Nos and MS Handles - 2 Nos with all specified fixtures as per approved design including cost and conveyance of all materials & labour Charges, Overhead Charges and contractor's profit @13.615% but excluding GST.

Supply and Fixing of Best Teak wood Door size 1.05 x 2.10 mts and frame of 75 x 100mm Thick and Z Hold Fasts 9" and MS Buthing 5" - 6 Nos and MS Aldrops 12" - 1 No., MS Towers Bolts 6"-3 Nos and MS Handles - 2 Nos with all specified fixtures as per approved design including cost and conveyance of all materials & labour Charges, Overhead Charges and contractor's profit @13.615% but excluding GST.

Supply and fixing of Sal wood Door Size 0.75 x 2.10 mts with all specified fixtures as per approved design, including cost and conveyance of all materials and labour charges, Overhead Charges and contractor's profit @13.615% but excluding GST.

Supply and fixing of Flush Door shutter of size 0.90 x 2.10mt with block board type with teak veneer on one face and commercial ply on another face30 mm thick (conforming to IS:2202 of shubdwara), with frame made of well seasoned sal Wood scantlings of size 100 x 75mm including cost and conveyance of all materials and labour charges including Overhead Charges and Contractor's Profit @13.615% but excluding GST (APSS NO.1001 & 1002).

Supply and fixing of 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19gauge thickness and size of 19mm x 19mm for stiles, &15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture.M.S. frame shall be covered with 5mm thick heat mouldedPVC „C‟ channel of size 30 x 50mm forming stiles, and 5mmthick, 75mm wide PVC sheets for top rail, lock rail &bottomrail on either side, and 10mm (5mm x 2) thick, 20mm widecross PVC sheet as gap insert for top rail & bottom rail.Panelling of 5mm thick PVC sheet to be fitted in the M.S.frame welded / sealed to the stiles & rails with 30mm wide x5mm thick PVC sheet beading on either side, and joinedtogether with solvent cement adhesive etc. An additional5mm thick PVC strip of 20mm width is to be stuck on theinterior side of the „C‟ Channel using PVC solvent adhesive.Complete as per direction of Engineer-in-charge,manufacturer‟s specification & drawing for finished item ofwork Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST.

Supply & Fixing of M.S Grills to Doors, Windows ladder and Compound Wall Gates etc using M.S Flats,M.S Square Rods, M.S Pipes including Cost and Conveyance of All Materials including Welding,Fabrcation and Fixing chares etc Complete as per the directions of the Engineering Incharge including Overhead charges and Contractor's profit @13.615% but excluding GST.

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc. all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work.(APSS No. 911) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST - for Internal walls

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc. all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work.(APSS No. 911) Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST for external walls

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components and CP short bend and fixed using required size of nails and screws, 12mm PVC connections with brass union nuts CP coated and 12.70mm dia. NP bib tap 400 grams Seiko or equivalent complete including cost and conveyance of all materials to site, for finished item of work for all floors including Overhead charges and Contractor's Profit @13.615% but excluding GST

Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice/ Esso or equivalent complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , 1 No.12.70mm NP bib tap 400 gms Seiko or equivalent , 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges etc. complete for finished item of work including Overhead charges and Contractor's Profit @13.615% but excluding GST

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing etc. complete for finished item of work including overhead charges and contractor's profit @ 13.615% but excluding GST - 22.20 mm OD Pipe.

Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing etc. complete for finished item of work including overhead charges and contractor's profit @ 13.615% but excluding GST - 28.60 mm OD Pipe.

Supplying and fixing NP bib taps of size 12.70mm dia of Indian make Seiko or equivalent including cost and conveyance of all materials, labour charges etc., complete for finished item of work including overhead charges and contractor's profit @ 13.615% but excluding GST.

Supplying and fixing of SWR PVC pipes of 75mm dia (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work (APSS No. 1302 1319 & 1326) including overhead charges and contractor's profit @ 13.615% but excluding GST.

Supplying and fixing of SWR PVC pipes of 90mm dia (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work (APSS No. 1302 1319 & 1326) including overhead charges and contractor's profit @ 13.615% but excluding GST.

Supplying and fixing of SWR PVC pipes of 110mm dia (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work (APSS No. 1302 1319 & 1326) including overhead charges and contractor's profit @ 13.615% but excluding GST.

Providing and placing on terrace (at all floor levels) polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including overhead charges and contractor's profit @ 13.615% but excluding GST.

Supplying & Fixing 76.20mm (3") Prince/ Sudhakar or Equivalantal PVC/SWR Nahany trap with Jali for all floors including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work including overhead charges and contractor's profit @ 13.615% but excluding GST.

Supplying & Fixing white glazed flat back half stall Urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 410 x 265 x 305 mm (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work for all floors. including overhead charges and contractor's profit @ 13.615% but excluding GST.

Supplying and fixing of stainless steel sink of size 914.4 mm x457.2mm, 1mm thick of Indian make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces etc., complete.for finished item of work including overhead charges and contractor's profit @ 13.615% but excluding GST.

Cost and Supply 900mm dia RCC Well Rings for Septic tank including overhead charges and contractor's profit @ 13.615% but excluding GST for Covers.

Cost and Supply 900mm dia RCC Well Covers for Septic tank including overhead charges and contractor's profit @ 13.615% but excluding GST.

Drilling of borewell by down the hole hammer with DTH rig to a finished dia of 112/165mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation all consolidated formation etc., and reaming the bore to subinsertion of required casing pipe etc., Including insertion of casing pipe with couplings caps any other revaent materials upto required depth as directed by the department , transportation of drilling rigs and supporting vehicle and including bore development. flushing of borewell at an average pressure of 150 PSI conducting yield test Crew charges done to the satisfaction of the department and including all labour charges and all taxes , but excluding the cost of casing pipe etc., The entir work should be carried out as per IS 2800 Part I & II 1979 and 11189 of 1985 and amended from timt to time. RATE AS APPROVED BY DISTRICT COLLECTOR 2013-14 in RWS & S Dept. including overhead charges and contractor's profit @ 13.615% but excluding GST for 165mm dia bore well.

Cost supply of 140mm dia. PVC 6kg per sqmm class III for casing CSSR Sl.no 20 Pg 66 including all charges complete including overhead charges and contractor's profit @13.615% but excluding GST.

Supply of WPSC insulated 3core 2.50sqmm flat copper cable CSSR including overhead charges and contractor's profit @ 13.615% but excluding GST.

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor up to 1.5 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/Seimens/BCH/Crompton. complete including Overhead charges and Contractor's Profit @13.615% but excluding GST.

Manufacture, Supply, & Delivery of HDPE Pipes 25mm dia 16kg/sqcm conforming to IS 4984 - 1995 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) including overhead charges and contractor's profit @ 13.615% but excluding GST.

Supply and Fixing of 25mm dia 1.80 mm thick (Medium type) P.V.C. pipe of make Sudhakar/Maco plast/Modi (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST

Supply and Fixing of 25mm dia 2.20 mm thick heavy type P.V.C. pipe of make Sudhakar/Maco plast/Modi (ISI MARK) concealed in Roof Slab with all required accessories including masonary work and labour charges etc., complete. Including Overhead charges & Contractor's Profit @ 13.615% but excluding GST