REPAIAR TO ROOF TREATMENT SUNKEN FLOOR PLUMBING WORKS RWP WATER SUPPLY FITTING AND FIXTURE PCC FLOORING AND OTHER MISC WORKS IN SMQ ALONGWITH REPAIRS AND CLEANING OF SERVICE TANKS OVERFLOWS REPLACEMENT OF OLD UNSERVICEABELE SERVICE TANKS WATER SUPP

Amount

Taking up or down following size of steel tubing and connections including removal to store for reuse or credit to contractor Note : (a) The rates apply to pipes above or below ground only in repairs and alterations. (b) 'The rates for taking down piping, etc., and removing to store include disconnection of fittings from tubing, where required.

15mm bore of pipe

20mm bore of pipe

25mm bore of pipe

S&F CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors of following sizes: (SDR-13.5 of Make : Astral or equivalent of Supreme / Finolex)

20mm nominal dia of pipes

25mm nominal dia of pipes

32mm nominal dia of pipes

S&F tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors of following size :-

15mm bore

20mm bore

25mm bore of pipe

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of following sizes

20mm dia bore

25mm dia bore

S&F in repairs rotational moulded polythene white water storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 500 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) (Make of tank - Sintex cat No CCWS 0050-02-TLW or equivqalent of makes given in Appendix 'B'to PS, Make of ball valve - Prayag Cat No - 153 or equivalent in Polytuff as approved by GE)

All as per item above but capacity 750 ltrs (Make of tank- Sintex cat No CCWS 0075-01-TLW or equivqalent of makes given in Appendix 'B'to PS)

All as per item above but capacity 1000 ltrs (Make of tank - Sintex cat No CCWS 0100-01-TLW or equivqalent of makes given in Appendix 'B'to PS)

S&F in repairs 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) (Make- Prayag Cat No - 153 or equivalent in Polytuff as approved by GE)

S&F in repairs 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) (Make- Prayag Cat No - 153 or equivalent in Polytuff as approved by GE)

Dismantling of cast iron,PVC or reinforced concrete pipes jointed in cement mortar/solvent cement etc. and taking out of trenches if required all as directed by Engr-in-charge following bore of pipe

a) 100/110mm dia of pipes

b) 75mm dia of pipe

S&F UPVC ultra drain, pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors of following size

110mm dia of pipe

75mm dia of pipe

S&F of UPVC junction single 'Tee' equal with door opening, ISI marked, IS-14735, jointed with solvent cement of following sizes :- (Make : Astral/ Finolex / Supreme or equivalent of the makes given in Appendix 'B' to Particular Specifications)

110mm dia of pipe

75mm dia of pipe

S&F of UPVC bend equal of any radius with door, ISI marked, IS-14735, jointed with solvent cement for 75mm size pipes.

S&F of UPVC bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 110mm size pipes.

S&F of UPVC socket reducer 110mmx75mm size, ISI marked, IS-14735, jointed with solvent cement.(Make : Astral / Finolex / Supreme or equivalent of the makes given in Appendix 'B' to Particular Specifications)

S&F of UPVC cowl for 75mm size pipes, ISI marked, IS-14735, jointed with solvent cement.(Make : Astral / Finolex / Supreme or equivalent of the makes given in Appendix 'B' to Particular Specifications)

S&F in repairs of UPVC gully trap 150x110mm,setting and jointing with solvent cement including dismantling of surrounding concrete and fixing of gully trap with and including cement sand mortar 1:3 complete.(Make : Astral type 'B' pipes or equivalent of Finolex / Supreme or equivalent of the makes given in Appendix 'B' to Particular Specifications)

Cleaning & removing all scale and dirt etc from PVC water tank and from mouths of circulating pipes etc of capacity exc. 250 liters and n.exc. 500 ltrs including disconnecting and refixing all parts required to be disconnected for cleaning of the tanks.

All as per item above but of capacity exc 500 liters and n.exc. 1000 liters

All as per item above but of capacity exc 1000 liters and n.exc. 2000 liters

S&F in repairs for bib taps, fancy type, cast copper alloy with crutch handle, cromium plated, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore.

S&F in repairs stop valve fancy type 15 mm dia, cast copper alloy, chromium plated, high pressure with crutch handle screwed both ends for iron pipe or for unions.

S&F PVC connection 450mm long with check nut for wash hand basin/ flushing cistern etc complete.

S&F in repairs for pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe .

S&F in repairs shower rose150mm dia, cast copper alloy, chromium plated, screwed end for iron pipe or for unionsof 15 mm dia, swivel joint.

S&F PVC flexible waste pipe (heavy duty) 40 mm for fixing to WHB with long screwed shanks and fly nut flanged.

S&F in repairs PVC low level valveless, syphonic action type flushing cistern, white, with inlet, ball valve, float and handle including brackets of 10 Ltr capacity complete. Make-Cera/ Hindware/Champion.

Supply and fixing in repairs tank top cover (lid) white of make : Sintex suitable for 500 ltr capacity all as specified and directed.

Supply and fixing in repairs tank top cover (lid) white of make : Sintex suitable for 750 ltr capacity all as specified and directed.

Supply and fixing in repairs tank top cover (lid) white of make : Sintex suitable for 1000 ltr capacity all as specified and directed.

Taking down existing water proofing tretment on RCC slab / beams with bitumen felt with out damaging structure and removing the debrise outside the MD land and M&L for plaster 10 mm thck on concrete surfaces in cement mortar 1:3 finished even and smooth using WPC @ 3% by weight of cement and preparing the surfaces to recive WPT treatment , applying a coat of bitumenm primer confirm to IS - 3384-1986 @ 3% per sqm . providing APP modified memrane with non woven polyster reinforcement/mat ( centre core) by tourch application over primed surfaces all as specified and directed by Engr-In- Charge

M&L for cement concete type B-1,1:2:4 mix (using 20 mm grade aggregate) as in copings including necessary form work complete all as specified and directed.

S&F in repair GI spouts of 40 mm dia pipe , approxly 700mm long in sunken floors including necessary cutting , chipping of walls and making good with PCC 1:2:4 type B0 or cement mortar 1:3 with WPC all as specified and directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM 1:6 all as specified and directed.

Glazed ceramic coloured tiles in vertical surfaces such as in skirting and dados 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over plaster in CM 1:4 all as specified and directed.

Taking down cement plaster on brick or stone walls or PCC block walling including raking out joints hacking for key scrubbing down with water etc.

M&L for rendering 10mm thick on concrete surface in cement mortar 1:6 finished even & smooth without using extra cement.

M&L for rendering 15mm thick in CM 1:4 with water proofing compound @3% by wt of cement on fair faces of brick work or concrete surfaces,, finished even and fair. Note : WPC will be measured and paid separately.

Supply only water proofing compound

M&L for preparing new plastered wall surfaces and applying two coats of distemper with distemper oil emulsion, white or tinted including one coat of wall care putty by finishing the surfaces even and smooth complete all as specified and directed.

M&L for preparation of plastered or unplastered new extrernal wall surfaces of walls and applying two coats of exterior emulsion paint all as spepcified and directed by EIC using any one of following material :- Make Brand Nerolac Suraksha Asian ACE Berger Walmasta

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) n exc 1.5 sqm

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm

S&F PVC door PDS-01 comprising of shutter and frame of Make : Accura Polytech Pvt Ltd (Accucel) all as shown on drg No.CEAA/TD/149 sheet No. 1/1 (PVC RIGIDE FOAM) , door frame/ chowkhats of solid rigid foam profile FP-6030 and shutter of solid PVC foam profile FP 7114 with 4 mm thick high pressure compact laminate as infill (Panel) including necessary hardeware fittings all as specified and directed by EIC.

M&L for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out of JINDAL/ INDAL anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle and anodised aluminum fittings such as stay, hinges glazing with 5 mm thick tinted sheet glass and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) all as specified and directed.(Tint of glass shall be approved by GE) Note :- Aluminium grill fixed under above item shall be measured and paid separately

Supply , fabricate & fix anodised (15 micron) aluminium sliding windows/ ventilators made out of Jindal/Hindalco Aluminium sections as in frames , sliding/ fixed shutters etc. With one or more rebates incl. Jointing cleats & locking arrangements complete all as specified & as per manufacturer's instruction. Note- Quoted rate shall deemed to be included for supply of aluminium sections, fabricate & fixing in position of window frames & shutters, locking arrangements complete.

M&L 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane. for fixing in aluminium sliding windows. Note- Rubber beading shall be measured & paid seperately.

S&F rubber beading for fixing of glass of item No 18 above complete.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed wih stainless steel wire staples.

Supply only aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm

S&F in repairs vitreous china wash basin, angle back, size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets.

S&F of waste pipe of 32mm dia PVC pipe for WHB with long screwed shanks and fly nut flange end beddedd in red lead cement and other end fixed

S&F in repairs soap dish any type fixed to plugs with chromium plated brass screws.

S&F in repairs Aluminium anodised tubular towel rail 20mm dia D Type 60cm long between flanges

S&Fin repairs for Vitrious china squattin pan ,Orrissa Paattern Size 580x440 mm white with integral foot rests ( Excluding flushing cistern and flush pipe)

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding, flushing cistern and flush pipe) complete connected to p trap complete.

S&F in repairs jet spray to EWC with PVC nozzle, PVC fish plates and PVC fish plates and PVCflexible pipe etc complite.

S&F in repairs for grating square 150mmx150mm size of stainless steel

S&F in repairs for brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, washers and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 x 460 mm, bowl size 410 x 330 x 180 mm Make : Prayag or equivalent and nearest size

S&F in repairs stainless steel plate rack made out of 1mm thick stainless steel sheet, overall minimum size 60cm x 90cm and for 6 plates as approved by GE . Make : Prayag or equivalent and nearest size

Demolition of cement concrete unreinforced in ground floors and pavings n.exc 15cm thick (below or above ground level)

M&L for 75 mm thick cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in sub base under interlocking tiles.

M&L 60 mm thick (M-35 mix) with grey cement and pigment, glossy rubber mould interlocking tiles (paver blocks red & yellow colour topping) conforming to IS-15658-2006 laid dry over 30 mm thick compacted sand bed, size & pattern of tiles all as directed by Engineer-in-Charge. Make Supreme/Mehtab or any other ISI marked as approved by GE

M&L Fine aggregate (sand) complete all as directed by Engineer-in-Charge.

Pelectricals

GPR Construction Co.

BHAVANI PROVISION STORES

M/s Bombay Novelty Stores

M/s Pal Builders

GOPI CONSTRUCTION

sudarshan builders

ASHAPURA CONTRACTOR

Khodiyar Construction