RENEWAL/REPLACEMENT OF CHAIN LINK/PVC COATED CHAIN LINK FENCING AND BARBED WIRE FENCING AT CERTAIN LOCATIONS AT AF STATION SURYALANKA

Amount

Dismantling RCC fencing posts embedded in concrete, any section, including taking out embedded portion and removal of surplus excavated material to a distance not exceeding 50 m all as specified and directed.

Dismantling of fencing wire mesh of any description including Round bar lines, flat iron, clamps etc complete all as specified and directed by Engineer-in-charge.

M&L for plain cement concrete 1:4:8 mix, type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-charge.

M&L for mild steel deformed TMT bars 8 mm dia as in reinforcement to concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as directed by Engineer-in-Charge.

M&L for mild steel deformed TMT bars 5mm dia and upto and including 10mm dia, as in stirrups & spacers, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed by Engr-in-charge.

M&L for Providing reinforced cement concrete type B-1, 1:2:4 mix (using 20 mm graded stone aggregate) in precast posts, fencing posts, straining or terminal posts, struts, etc., for fencing, average sectional area exc 100 Sqcm and not exc 250 Sqcm with or with out chamfered angles and flat, splayed, rounded or mitred tops and fixed complete all as specified and directed by Engineer-in-charge.

S&F mild steel machine made screw bolts of 5 to 10 mm dia (Diameter of neck in mm ) hexagonal or square heads at one end and screwed the other, screwed end fitted with washers and one hexagonal or square nut, exceeding 10 cm but not exceeding 15 cm long all as specified and directed by Engineer-in-charge.

S&F Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to RCC precast fencing post including securing or tying at crossings with and provision of galvanised mild steel wire wire , staples or steel pins, etc, fixed in repairs complete all as specified and directed by Engineer-in-charge. (Each line wire to be measured).

S&F PVC coated chain link fencing of mesh size 50 x 50 mm, 4 mm dia wire (1.5 mm PVC coating over 2.5 mm dia wire) fixed to any type of standards, rails, posts, straining bolts etc., all as specified and directed by Engineer-in-charge.

S&F Fe-290 Gde E-165 mild steel flat iron fillets for securing wire mesh etc. including all necessary drilling holes for bolting or riveting, etc. and similar work all as specified and directed by Engineer-in-charge.

S&F Fe 290 Gde E-165 mild steel work as in clamps, hold fasts, hooks etc., and similar small articles all as specified and directed by Engineer-in-charge.

S&F mild steel machine made screw bolts not exceeding 5cm long with 5 to 10 mm (diameter of neck) hexagonal or square heads at one end and screwed the other, screwed end fitted with washers and one hexagonal or square nut, not exceeding 5 cm long all as specified and directed.

S&F Mild steel bar round bars 10 mm dia and over in fencing, cut to length, bent to shape required including cranking, bending, hooking ends and binding etc. conforming to grade I, IS-432 (Part I) all as specified and directed.

M&L for preparing new or previously untreated surfaces of steel and iron surfaces of any description not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer complete all as specified and directed by Engineer-in-Charge. Make:- ASIAN/ SHALIMAR/ BERGER/JENSON&NICHOLSON

M&L for preparation of newly plastered surfaces of RCC fencing posts/pillars etc and applying two coats of cement base paint, white or tinted over a priming coat all as specified and directed by Engineer-in-charge. Make: INDOCEM/ SUPERSNOWCEM/ AQUACEM/ DURACEM

Sub Total of Schedule 'A'

Schedule of Credit (Minus) Rs. 24,450.00 B/F from Ser page No. 23. NOTE: Bidder shall insert credit amount as rate Rs. 24,450.00 in Green field under Col-M. If bidder does not insert the amount the same will be deducted from total amount of Schedule 'A' and accordingly total amount of tender will be considered in deciding the lowest tender.

Sub Total of Schedule of Credit

G V N R CONSTRUCTIONS

DHANA CONSTRUCTIONS

Bismi Engineering