SPL REPAIR/RENOVATION OF 2 UNITS OF STAFF QUARTERS AND TOILETS AND OTHERS MISC WORKS OF VIDYALAYA BLDGS UNDER GE ARMY BHUJ

Amount

Demolition of cement concrete of any description and in any position not otherewise specifically provided including removal of old treatment of any description complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in padding (level course) on roof surface averaging 40mm thick etc complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:3 mixed with integral water proofing compound as per manufacture's instructions as in roof and chajjas, finished the surface fair and even with out using extra cement complete all as specified and as directed. (Note : Supply of water proofing compound will be measured and paid separately .)

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horicontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.

M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick Screed bed in CM 1:4 mortar thick complete all as specified and as directed.

M&L for 75mm thick PCC type C2 1:3:6 (20mm graded aggregate) as in path/plinth protection etc laid in pannels including finished the surface smooth and even without using extra cement all as specified and as directed.

Taking down cement plaster any description including terrazo dados and the like on brick or stone walls, Ceilings etc including raking out joints,hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on brick/concrete surface in cement mortar 1:4 finished even and smooth with using water proofing compund as per manufacturer instruction all as spd and directed. (Note: WPC will measured and paid separately)

Supply only integral water proofing compound.

M&L for rendering 15mm thick plaster in two layers (10mm dubbing coat and 5mm thick finishing coat with chicken wiremesh) in CM 1:4 on fair faces of brick/concrete finished even and smooth without using extra cement complete all as specified and as directed. NOTE :- (Chicken wiremesh will be measured and piad seperately)

S & F Hard drawn steel wire fabric not exc 4 Kg cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement complete all as specifed and directed.

M&L in repair for rotational moulded multi layered polyethylene water storage tanks (cylindrical verical with closed top) hoisted and fixed in position all as specified in 1000 ltrs capacity with15 mm HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule including taking down the existing complete all as specifed and directed.

S&F PVC connection 15mm size, 450mm long with PTMP nuts both side,etc complete all as specifed and directed.

S&F PVC (SWR) of Type B "ISI" mark confined to IS 13592 : 1992 pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore complete all as specifed and directed.

S&F PVC (SWR) of Type B "ISI" mark confined to IS 13592 : 1992 pipes single socketed, in any length with rubber ring joints, laid in walls 110mm bore complete all as specifed and directed.

S&F PVC (SWR) of Type B "ISI" mark confined to IS 13592 : 1992 bends any radius with access doors 75mm bore complete all as specifed and directed.

S&F PVC (SWR) of Type B "ISI" mark confined to IS 13592 : 1992 bends any radius with access doors 110mm bore complete all as specifed and directed.

S&F PVC (SWR) of Type B "ISI" mark confined to IS 13592 : 1992 branch piece with access doors , double (double Y) equal or unequal 75mm bore complete all as specifed and directed.

S&F PVC (SWR) of Type B "ISI" mark confined to IS 13592 : 1992 branch piece with access doors , double (double Y) equal or unequal 110mm bore complete all as specifed and directed.

S&F PVC (SWR) of Type B "ISI" mark confined to IS 13592 : 1992 junction with access doors , (double T), equal or unequal 75mm bore complete all as specifed and directed.

S&F PVC (SWR) of Type B "ISI" mark confined to IS 13592 : 1992 junction with access doors , (double T), equal or unequal 110 mm bore complete all as specifed and directed.

S&F PVC (SWR) of Type B "ISI" mark confined to IS 13592 : 1992 vent cowl 110mm bore complete all as specifed and directed.

S&F PVC (SWR) of Type B "ISI" mark confined to IS 13592 : 1992 floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specifed and directed.

M&L salt glazed stone ware gully traps square or rounded mouthed type & fix 150 x 150 mm fixed in cement concrete complete all as specifed and directed.

S &F Flushing pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as spd and directed.

S&F GI tube 15mm dia medium graded with all fitings and fixed to wall, celing or laying in trenches including taking up and down complete all as specified and directed

S&F GI tube 20 mm dia medium graded with all fitings and fixed to wall, celing or laying in trenches including taking up and down complete all as specified and directed

S&F CPVC 16mm dia SDR 13.5 pipes & plain CPVC SDR 11 fitings and fixed to wall, celing or laying in trenches including taking up and down complete all as specified and directed.

S&F CPVC 16mm dia SDR 13.5 pipes & plain CPVC SDR 11 fitings and fixed to wall, celing or laying in trenches including taking up and down complete all as specified and directed.

S&F in rapairs for Vitreous China wash basin, angle back, size 600x480mmmm including cutting for and pinning in ends for bracket, fitting with pillar tap 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or with out letter 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and waste fittings 32 mm (LDPE Pipe)waste pipe waste pipe 1 m length, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F grating doom 150 mm dia of PTMT in repairs complete all as specified and directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane incl hacking out the old onescomplete all as specified and as directed.

S & F in repairs for Vitreous china wash down water closet pan squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests , inc. 10 litres, PVC flushing cistern, Low level, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, black, closed pattern with flat bottem, & cover & M S CP or aluminium hinging device complete all as specified and as directed.

S&F in repair fancy type bib tap 15 mm bore,, cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repair stop valves cast copper alloy chromium plated with long shank (concealed), screwed both ends for iron pipe 15mm bore complete all as specified and as directed.

S&F in repair pillar tap fancy Type cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe complete all as specified and as directed.

S&F in repairs10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified and as directed.

Taking down shutters of any description exc. 1.00 Sq.m and n.exc. 2.00 Sq.m each complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions complete all as specified and as directed.

S&F 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F 150mm long Aluminium handles, cast type, anodised complete all as specified and as directed.

S&F 100mm longAluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 35mm thick plain factory made framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply The size of rail and stile as per IS 1003 (Part-I Kiln seasoned and chemically pressure treated ISI Marked complete all as specified and as directed.

S & F, 35mm thick, 2nd class hardwood ISI Marked glazed & skelton shutters, open rebated & prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) complete all as specified and as directed.

M&L in repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination fixed with timber frame work of cupborads book cases etc incl complete all as specified and as directed.

S&F continous (piano) hinges, mild steel bright finished or electrogalvanised width of flaps in 30mm complete all as specified and as directed.

S&F 40mm dia cubboard knobs fixed with nuts screws and washers of brass polished of approved quality complete all as specified and as directed.

S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed..

S & F 300mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete all as specified and as directed.

S & F 150mm long floor door stopper of aluminium alloy boly and tongue anodised with hard steel spring fixed in floor complete all as specified and as directed.

S&F in repair 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane. Incl hacking out old broken glass complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm fixed to steel windows / wooden doors fixed with GI wire staples complete all as specified and as directed.

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level) complete all as directed.

M & L 75mm thick PCC 1:5:10 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M & L for rubber moulded Chequered cement concrete tiles 300mm x 300mm x 25mm thick, set, jointed and pointed in near cement slurry with grey cement and pigments in floors over a 15mm thick screed bed in CM 1:6 complete all as specifed and directed.

S&F in repairs PVC cabinet with door fitted with looking mirror size 422mm x 622mm complete all as specifed and directed.

M&L granite (any type) 20mm thick table rubbed & polished for wall lining (veneering to wall) in cm 1:3 including pointing in white cement (1:2) using marbble dust with admisture of pgment ot match with shade of granite complete all as specifed and directed.

S & F Aluminium curtain rails, with fixing brackets complete all as specifed and directed.

M&L for preparation of old plaster sufraces of ceiling and applying two coats of White wash over a coat of primer complete all as specifed and directed.

M&L Preparing of plastered or unplastered old decorated surfaces and applying one coat of oil bound distember on walls complete all as specified and directed.

M & L for one coats of synthetic enamel paint on wooden surfaces of any description, not otherwise described, over 10cm width or girth.including preparation of old painted surfaces complete all as specifed and directed.

M & L for one coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise described, over 10cm width or girth.including preparation of old painted surfaces complete all as specifed and directed.

M & L Preparation of plastered or unplastered old decorated surfaces of wall and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade incl primer complete all as specifed and directed.

M & L for Removal of rust on exposed reinforcement in RCC structures and applying primer and filling it with Micro concreting as per manufacturer's instructions of Fosroc or equivalent after covering it formwork complete all as specifed and directed.

M&L guniting for crack filling shortcrete 1 :2 (CM) mixed with epoxy resin and hardner (manufactured by FOSROC/MC BAUCHEMIC/CICO/PIDILITE)@ 2% by weight of cement in equal proportion using short crete pumps and allied equipment,in thickness 30 mm (average) all as per manufactureres instruction (Upto 10 m height) complete all as specifed and directed.

S/F MS TMT bars 6mm to 8mm dia and over for reinforcement etc, for lapping to the existing reinforcement cut to length, bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specifed and directed.

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for flat and rough finished Square, rectangular or polygonal complete all as specifed and directed.

M&L for preparation of new/old plaster surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specifed and directed.

M & L for Preparation of old decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Excavation in trenches in soft / loose soil not exceeting 1.5 Mtr wide and not exceding 1.5 Mtr in depth and getting out for taking out / laying of cables, erection of poles / strut / stays etc and not exceeding 10 sqm on plan complete all as specified and directed.

Returning, filling in the any type of soil including spreading, levelling, watering and ramming in layers not exc. 25 cms complete all as specified and directed.

Removing excavated material of any type of soil not exceeding 50 Mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for sand cushioning in cable trenches over & under the cables, with river washed coarse sand, as per standard practice with proper compaction complete all as specified and directed. (Punned thickness 18 cm shall be considered for payment as per para 19.75 of SSR Part-I).

Supply & Laying un-reinforced precast concrete cable cover type-1 Class IV, size of 250 mm x 150 mm x 40 mm laid dry in trenches for under groung cable protection complete all as specifed and directed.

S & F in repair unplastisized PVC ball valve with crutch or butterfly handle (stop valve) of size 25mm dia both and threated complete suitable for PVC pipe fitting with ASTM-1785, Schedule 40 complete all as specified and directed

Supply and fixing in any length UPVC pipe manufacture as per ASTM-D-1785 as per IS-559, Sch-40 complete with fittings, laid in treanches in required length complete all as specified and directed by Engr-in-charge of following size of 25 mm dia complete all as specified & directed.

Supply and fixing in any length UPVC pipe manufacture as per ASTM-D-1785 as per IS-559, Sch-40 complete with fittings, laid in treanches in required length complete all as specified and directed by Engr-in-charge of following size of 20 mm dia complete all as specified & directed.

Taking down carefully copper/aluminium point wiring (light,fan,socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody ot for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

M&L for point wiring for One light/fan/exhaust fan/buzzer point controlled by one,one way switch with using 1.5 Sqmm (nominal sectional area) multi stranded copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC casing and capping/PVC Conduit of adequate size fixed on surface with PVC rawl plugs with and including Wooden Board/sunken type pressed steel terminal boxes of required size of not less than 1.6 mm thick factory made and factory painted with top cover 3mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit/casing capping complete for one light/fan/exhaust fan point controlled by one; one way switch. NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers

All as per item No. 85 here-in-before but One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch.

All as per item No. 85 here-in-before but One 3 pin socket out let 5 amp point on the (same board) with other switches.

All as per item No.85 here-in-before but with using 2.50 Sqmm cable and 1.5sq mm earth cable PVC insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

S & F ceiling rose, surface bakelite, 65X20mm three terminal complete all as specified and directed. Make : Anchor/Havell's/Legrand

S & F switch piano flush button single pole230 / 250 volts one way 5 Amps Complete all as specified and directed. Make : Anchor/Havell's/Legrand

S & F socket outlet 5 pin 5 Amp, flush type complete all as specified and directed. Make : Anchor/Havell's/Legrand

S & F switch socket combination multi-purpose two in one, 3 pin, 5 and 15 Amp, flush type complete all as specified and directed. Make : Anchor/Havell's/Legrand

S & F bell push button single pole230 / 250 volts 5 amps Complete all as specified and directed. Make : Anchor/Havell's/Legrand

S & F bell ding dong AC, 230 volts single pole complete all as specified and directed. Make : Anchor/Havell's/Legrand

S & F deluxe electronic ceiling fan regulator rotatry type, four step 120/240 Volt and connecting all as directed. Make : Anchor/Havell's/Legrand

S & F Exhaust fan ventilator DX 200mm sweep 36W ideal for mounting on glass/wooden window 220/230 Volts AC high quality plastic body and connecting up to the ceiling rose with flexible three core copper conductor of size 23/.0076 including provision to fix the ventiliar fan to the glass / wooden window / by providing duitable fixing arrangement, farse nut, bolts etc complete all as specified and directed. Make : Havells/Crompton Greaves/Orient

S & F of elegantly industrial general purpose box type luminaire metal body, 1x18 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with electronic driver, spring loaded rotor type lamp holders, connected block with and including 01 No LED tube 18 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and incl fixing arrangement of PVC square box for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed. Make :Confirming to Cat part No IGP 131 LT8-18 of crompton greaves or equivalent of Goldwyn/Wipro

Supplying & fixing lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings incl 01 No LED lamp 14/15 watt 6500 K complete all as specified and directed.

Taking down carefully aluminium/copper submain wiring /cable including steel/PVC conduit complete and making good disturbed surfaces of walls, floors etc and M & L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 4 Sqmm of voltage rating 1100 Volts drawn in and including surface casing and caping with standard accessories, along-with one run of PVC (green colour) insulated, unsheathed, stranded copper conductor of size 2.5 Sqmm as earth continuity conductor Complete all as specified and directed. NOTE: Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.

Supply, laying & testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 volts grade, earthed of size 25 sqmm, 4 core laid in trenches / poles / fixed to walls etc complete all as specified and directed.

Supply, laying & testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100 volts grade, earthed of size 16 sqmm, 2 core laid in trenches / poles / fixed to walls etc complete all as specified and directed.

Taking down carefully MCBs, distribution boards/main switches of any type and size for replacement and Supply & fix for sheet metal enclosure powder painted for MCB DB TPN 4 way double door with IP-43 protection with Din rail and busbar Complete all as specified and directed. Make : Legrand Cat No. 5077 58 or equivalent of Havells/L & T/C&S

Taking down carefully MCBs, distribution boards/main switches of any type and size for replacement and Supply & fix for sheet metal enclosure powder painted for MCB DB SPN 8 way double door with IP-43 protection with Din rail and busbar Complete all as specified and directed. Make : Legrand Cat No. 5076 11 or equivalent of Havells/L & T/C&S

Supply & fix in repair MCB SP 230V 'C' series 6-32 Amps 10 KA rating ISI marked and connecting Complete all as specified and directed.

Supply & fix in repair MCB SPN 230V 'C' series 6-40Amps 10 KA rating ISI marked and connecting Complete all as specified and directed.

Supply & fix in repair MCB TPN 415V 'C' series 63 Amps 10 KA rating ISI marked and connecting Complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. (The Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’. The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:2:4 type B1 cover 50mm thick reinforced with 8mm dia TMT bars @ 150mm C/C both ways, funnel with watering pipe.) Note :- The retreived materials have been mentioned in the Sch of credit in the tender documents in pdf form. The amount of Sch of credit will be deducted offline from the amount of BOQ at the time of acceptance.

M/S S. SINGH TRADERS

Ahmed B Khatri

M/s J K Enterprises

ASHAPURA CONTRACTOR

GOPI CONSTRUCTION