Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹3.6 L
EMD Value
₹7,109
Closing Date
27 Oct 2026, 5:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EE Jal Shakti Division Thural
EE Jal Shakti Division Thural
Providing commissioning of PVC insulated copper cable, common header and laying and joining of Rising main from Percolation well to collection tank
2026_HPIPH_145940_1
EE/JSVD/THL/2026-27-7831-65 Dt. 15.10.2026
Open Tender
Miscellaneous Services
Item Wise
90 days
EE Jal Shakti Division Thural
Please refer Tender documents.
7 documents required · 7 mandatory
₹350
₹7,109
16 Oct 2026
16 Oct 2026
28 Oct 2026
16 Oct 2026
27 Oct 2026
16 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and laying PVC insulated jointless flat water proof copper cable of Hevells/ Siemens/ Finolex/ Gloster / Grandlay/ Gloster make conforming to BIS 1554 (part-I) –1988 or latest with upto date amendments of suitable size for the pump sets offered (one cable carrying all three phases) including all other electrical equipment/ accessories such as thimbles, flexible pipe, solder, nuts and bolts, cable glands, etc. laid in pipes or trenches under floor. The type, size and make will be subject to approval of HPSEB authorities. In case of non acceptance by HPSEB authorities it shall have to be replaced by the tenderer free of cost . | |||||
| 1.1 | On supply side of 3½ core copper cable 6.00 mm2 (From HPSEB meter to switch & starter) | 20 | meters | - | - |
| 1.2 | on motor side 3 core flat joint less copper cable of size 6.00 mm2 (From switch & starter to Motor) pump installed in the bore . | 500 | meters | - | - |
| 2 | Providing of high steel carban rope size 10 millimeter square for holding of submersible pump set with in all leads and lifts as per the direction of Engineer in charge. | 24 | meters | - | - |
| 3Providing and Laying GI/ MSERW pipe of suitable size for suction delivery and common header considering site requirement and NPSH required/ available.The pipe sizes for suciton and delivery shall as per the requirement of offereded pump (to be given by the terndrers) and common header shall be equal to dia of rising main including tapers, flanges bends, rubber gaskets, 3 mm thick nuts and bolts and spicials up to 5 meter away from the outer wall of pump house as per layout drawing approved by Engineer in charge The pipe material shall confirm to relevant BIS codes and capable of with standing field test pressure equal to 1.50 times the operating pressure. The complete arrangement shall comprise of: complete in all respect as per direction of Engineer in charge with in all leads and lifts. | |||||
| 3.1 | Suction pipe of pump 80 mm dia | 20 | meters | - | - |
| 3.2 | Common Header = 125 mm | 3 | meters | - | - |
| 4 | Errection of all equipments of pumping machinery 2 nos set of 10 HP with all items including cost of tees, bends tapers & any other fitting required as per site conditions as per direction of the Engineer in charge . | 1 | Job | - | - |
| 5Laying, jointing with circumfrential butt welded joints by electrical arc welding ( welding thickness shall be equal to pipe wall thickness) and testing of GI pipe of approved store issued rate make of following diameter Confirming to IS 1239-1990 (Part-II), Latest with upto date amendments having wall thickness as specified below capable of with standing required test pressure, including manufacturing and febrication of reducers/ tapers , all short pieces, bends etc. as per site requirement made from parent tubes . The laying of pipe shall also include flanged joints duly welded in three layers (One inner & Two outer), where ever required as per direction of the Engineer-in-charge (Earth work in trenches and the cost of flanges i/c nut & bolts gasket will be measured and paid for separately) and all operations such as cutting, welding, jointing, fabrication of bends, tees i.e. lowering and laying in excavated trench to ensure required level including flushing, cleaning and hydraulic testing complete in all respects to the entire satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe.The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing. complete in all respect and to the entire satisfaction & direction of Engineer in charge with in all leads and lifts. | |||||
| 5.1 | 100 mm dia | 20 | meters | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.34 MB
Form6.pdf
Tender Documents • 0.43 MB
Form8.pdf
Tender Documents • 1.22 MB
BOQ_217461.xls
BOQ • 0.28 MB
Termsandconditions.pdf
Additional Documents • 0.20 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .