Rate Contract for Passive Networking and OFC Work at NIT Rourkela, Odisha - 769008

Group A - INSTALLATION / LABOUR CHARGES [FIBER OPTIC CABLE LAYING]

Digging of Hard Soil by manual labour (Spec: 3 feet Depth and 1 feet width) and refilling of trenches

Digging of Soft soil by manual labour (Spec: 3 feet Depth and 1 foot width) and refilling of trenches.

HDPE Pipe Laying and Laying of fiber cable through HDPE pipe, welding, cutting, drilling and finishing.

Termination / Splicing of Fibers (per fiber)

Fixing and Installation of LIUs

Splicing of pigtail

OTDR (Optical Time Domain Reflectometer) Testing, Report & Documentation, Labelling in LIU / Fiber Enclosure (per link)

Laying of optical fiber through PVC pipe, welding, wall cutting finishing by wall plaster

Road punching

Excavation and back filling with protection of bricks and sand in three side of HDPE pipe

OFC laying on surface / overhead

Supply and Fixing of RCC (Reinforced Cement Concrete) route marker after OFC cable and warning tape laying.RCC Dimension: 900x200x100mm

Supply and Fixing of Iron route marker after OFC cable and warning tape laying.Route marker dimension: [ Disc size - 200mm diameter; Stand size - Iron angle of 25mm x 25mm x 3mm, length 3 feet.]

OFC Route marking paint on wall (wherever it is required)

Group B - INSTALLATION / LABOUR CHARGES [UTP CABLE LAYING]

Laying and labeling of UTP cable through existing concealed pipe, welding, wall cutting, drilling and finishing wall by plastering.

Fixing of PVC Pipe

Fixing of PVC Casing and Capping

Supply and Fixing of PVC Pipe (Materials to be supplied by the vendor)

Supply and Fixing of PVC Casing and Capping (Materials to be supplied by the vendor)

Installation of wall mount rack.

Supply and fixing of a switch board with 5/15 amp socket and switch beside network rack.

Supply and fixing of a switch board with two 5/15 amp socket and two switchs beside network rack.

Fixing, labeling and termination of Back box, Face plate and I/O.

Fixing, labeling and termination of Face plate and I/O (Without Back box).

Outdoor UTP Cable Laying.

UTP Cable Laying through surface mounted PVC pipe, casing capping and overhead

Fixing of Patch / Jack Panel

Termination and labeling of UTP cable on Patch / Jack Panel (per port)

UTP Testing and documentation at both Patch / Jack Panel side and I/O side using DTX Analyser (per connection)

Termination/Crimping of RJ-45 Connector

Fixing of Wireless Access Point with proper mounting kit on Wall/Ceiling.

Group C - INSTALLATION / LABOUR CHARGES [CCTV SURVEILLANCE]

CCTV Surveillance Camera installation (Indoor Dome/Bullet/PTZ) in the wall/ceiling

CCTV Surveillance Camera installation (Outdoor Dome/Bullet/PTZ) on the Pole

Installation of pole for CCTV camera which has to be laid at a depth of 2 feet and filled with concrete for 1’ x 1’ x 1’ (“Only pole will be supplied by NIT Rourkela”)

CAT6 Cable Laying in open (ariel) with Stay Wires for Outdoor Surveillance Camera. (Stay wires have to be provided by the contractor )

Please Enable Macros to View BoQ information