Annual Maintenance Contract for Miscellaneous civil works, Upkeeping and Gardening at Koyla Bhawan, BCCL HQ for a period of 2 (Two) years

PART-A (Miscellaneous Civil Works)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level-Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level-1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622 , of approved brand & manufacturer in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)-Ordinary cement without any pigment

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge

Brick work with fly ash brick F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in :Cement Mortar 1:6(1 cement :6 coarse sand )

Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in :Cement mortar 1:6 (1 cement : 6 coarse sand)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead :With cement mortar 1:4 (1cement: 4 coarse sand)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe: 32 mm Dia

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity-white

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length: 15mm nominal bore

Providing and fixing soil, waste and vent pipes.100 mm dia. Sand cast iron S&S pipe as per IS: 1729

Providing and fixing soil, waste and vent pipes .75 mm dia. Sand cast iron S&S pipe as per IS: 1729

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 32 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 40 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm nominal dia Pipes

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes: 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion: Bend 87.5°: 110 mm bend

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:Of area 3 sq. metres and below

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Pre-laminated particle board with Pre-laminated particle board with decorative lamination on both sides

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. completeTwin rubber stopper

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness.

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :125 mm

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :250x16 mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :150x10 mm

Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :Old work (one or more coats)

Finishing wall with water proofing cement paint of required shade : Old work (one or more coats @ 2.20 kg/10 sqm) complete.

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer

Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work

French spirit polishing : One or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Welding by gas or electric plant including transportation of plant at site etc. complete.

Felling trees of the girth (measured at a height of 1 m above groundBeyond 60 cm girth upto and including 120 cm girth level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 60 cm girth upto and including 120 cm girth

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 30 cm girth upto and including 60 cm girth

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. : Door chowkhats

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type)

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm

cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Cleaning of septic tank by mechanical means as per direction of E/I

Repair and easy adjustment of 12 mm thick frameless toughened glass door shutter of approved brand and manufacture and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and Fixing of Urinal Top inlet with all fittings(Jaquar/URS-WHT-13253N or equivalent) as per direction of E/I

Providing and Fixing of Bottle Trap with all fittings(Jaquar/ALD-SSF-769L250X190 or equivalent) as per direction of E/I

Supplying/fitting/fixing Hand Shower( Health Faucet) with 8mm dia,1 meter long flexible tube & wall hook ( Jaquar/ALD - 573 or equivalent) complete job as per instruction of Engr.I/c

Supplying/fitting/fixing Two - way bib cock with wall flange (Jaquar/LYR-CHR-38041 or equivalent) complete job as per instruction of Engr.I/c

Providing/Fixing white vitreous china pedestal type water closet- W.C. pan (Jaquar/CNS-WHT-757NS300SPPZ or equivalent) white solid plastic seat and lid

Supplying/fitting/fixing table top wash basin (Jaquar/OPS-WHT-15933PM or equivalent), complete job including making all connections but excluding cost of fittings,complete job as per instruction of Engr.I/c

Providing A.C. Hole bidding of Size of A.C. Hole of size 2'4"x1'8" with 12mm marine plywood frame of 100mm width and complete to match the existing surface complete job as per direction of E/I

Providing A.C. Hole cutting in brick masonary of Size of A.C. Hole of size 2'4"x1'8" and making good the damaged to wall including cement plaster , 12mm marine plywood frame of 100mm width and complete to match the existing surface and disposal of malba/rubbish to dumping with 15 m lead ,complete job as per direction of E/I

Re-fixing 12mm thick pre laminated partical board with decorative one side complete job as per direction of E/I

Re-fixing aluminium door shutter reparing including necessery fitings such as angle clit/aluminium snaps beading/EPDM rubber neoprene gaskit/ steel secrew etc complete job as per direction of E/I

Providing and fixing 19 mm thick marine plywood with one side decorative and other side balancing lamination of grade as per IS 710 of approved brand for boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails, screws etc. complete as per direction of Engineer-in- charge.

Supplying/fitting/fixing 12mm thick marine plywood with one side decorative lamination of grade as per IS 710 of approved brand for boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails, screws etc. complete as per direction of Engineer-in- charge.

Providing and fixing 6 mm thick marine plywood with one side 1 mm thick decorative laminated sheet complete job as per direction of E/I

Installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Alumini um sheets (each0.5mm thick).The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) . For the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Wall painting with Dulux valvet touch paint of approved brand and manufacture to give an even shade as per direction of E/I

Providing and fixing of ceramic pot complete job as per direction of E/I

Providing and Pasting of wallpaper of Approved make and as per choice of E/I complete job

Providing and Fixing with silicon or double tape of Glass Mirror with all side polished complete job as per direction of E/I

Supply of plumber/fitter 2nd grade as and when required as per directionn of EIC

Supply of Carpenter 2nd class as and when required as per direction of EIC

Supplying & laying of approved make and brand of scratch proof, flexible & homogeneous P.V.C. Vinyle flooring conforming to IS:3462 - 1982 in required finish, fixed with synthetic acrylic adhesive after preparing the floor, levelling & smothaning when necessary with suitable putty, as per the design & instruction of the Engineer-in-charge.

Making Tribal art on pre painted wall and specified tree trunk with superior quality weather coat including one coat, background painting of different shades including primer coat and pictoral figures/writing with appropriate paint for prominent look and including cost of paint, labour, material like paint brush and tools and plants required for the work as per instructons of EIC.

PART-B (Upkeeping of Toilet )

Upkeeping of different toilets, bathrooms and connecting area including cleaning of DADO, Skirting, WC pan (Indian type and European type), wash basin, urinals, glass, cistern etc. by hand dusting and clearing with soap solution, acid, detergents, Phenyls, Harpic etc. and with equipment like brush, Broom Stick, bucket, stick, etc and to make toilet clean, functional clear, hygienic, aromatic (using urinal mat) all complete with tools, tackles & consumables as per instruction of Engineer-in Charge. Clause(i) Minimum number of labour deployed per day will be 15.00 nos. in case of any deduction in sweeper, proportinate deduction will be made acordingly as per coverage of total area. SCOPE OF WORKS: (a) Contractor shall maintain existing Bathrooms,Dado,Basin,WC Pan,Urinal Top,Mirror,Corridors,flower areas of service building etc. (b) Contractor will ensure Functioning of Urinals,WC Pan, etc. as and when required by Engineer-in-charge. Plumbing work is to be done wherever required. c) Contractor shall be responsible for arrangement of plumber as and when required by Engineer-in-charge and maintaining the same (Cost of the plumber to be paid separately to the agency). (d) The Urinal mat,napthalene ball,harpic,mopping stick,broom stick, wiper stick etc., as and when required. (The cost of the same shall be paid separately to the agency). e) Water will be made available by the department and the contractor will use the water by using Buckets.(The cost of the Bucket shall be paid separately to the agency). (f)Frequency of cleaning of toilet should be in a day, and as directed by the engineer incharge as per site requirement (g) Maintenance work as desired by Engineer-in-charge on priority basis has to be strictly followed by the contractor (h) The contractor will look after the work and will maintain coordination with the department and will attend to the complaint. (i)The Bathrooms and connecting areas, is to be kept clean from rubbish, and any other wastage materials. (j) Total area to be maintained per day = 750x3= 2250 sqm (Approx), 750 SQM in 03 times by engaging 15 Nos. of unskilled manpower .

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge : Phenyl Black Doctor brand or erqivalent in a 450 ml container

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge :Lizol floor cleaner 500ml container

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge :Detergent Powder (Wheel or equivalent)

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge :Acid Toilet Cleaner(400ml container)

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge :Supplying of Godreg Aero Packet

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge :Napthalene Ball (In adequate concentration)

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge :Mopping stick steel make(4' long)

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge :Wiper stick Steel make(5' long, blade size 1'6"X6")

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge :Broom Stick

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge :Toilet Brush(2' long)

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge :Harpic (500ml pack)

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge :Colin Spray (500 ml pack)

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge :Plastic Bucket 15 litres Capacity

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge :Plastic Jug 1 Litre Capacity

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge :Bleaching Powder(White)

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge :Freesh and Cleaned Urinal Mat/Screen Used in Urinal Pot

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge :Room Freshener Godrej air spray (empty bottle to be submitted by contrctor to the department)

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge :wet and dry cotton pad floor mop 67x14x5(18-inch) flexible moving head (simba or equivalent)

Supplying the following disinfectants / consumables as per requirement in a phased manner as per instruction of Engineer In Charge :Cotton Refill Wet and Dry Mop(18-Inch) (SIMBA or equivalent)

PART-C (Gardening)

Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking sludge at site including royalty and carriage up to 1 km (sludge measured in stacks will be reduced by 8% for payment).

Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge. Permanent office accommodation.(1Mali for 1.25Acre)

Maintenance of cement/ other potted plants in displayed at multi storied office buildings,flats and ground floor bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required (Materials provided by the department) as per direction of officer in charge.

Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, edge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide, lawn mover and brush cutter with fuel & other T & P material/ articles shall be provided by the department.)

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.

Providing and fixing of Arica palm, bamboo palm, cascade palm of minimum height 4' with plastic pot of 14"X10" dia complete job as per direction of E/I

Providing and fixing of Seasonal Plants for (SUMMER SEASON) as per direction of Engr.I/c (PUTICA ,COSMOS, KOCHIEA, SUNFLOWER, GINIA, SILACIYA, BUTTON FLOWER ) etc.

Providing and fixing of Seasonal Plants (WINTER SEASON) as per direction of Engr.I/c (DALIA, SALVIYA, CHINA MARIGOLD, INKA MARIGOLD, PITUNIYA, AUSTER, FLOX, PANSY, GULAWADI, HOLI WAX, DIANTHUS) etc.

SUPPLYING,FIXING OF ORNAMENTAL PLANTS (ROSE HYBRID, THUJA, AERICA PALM, EKJURA, BEGANVILA) etc.

SUPPLY OF MANURE (KARANJ KHALLI)

SUPPLY OF MANURE (DAP)

SUPPLY OF MANURE (UREA)

SUPPLY OF MANURE (BONE MEAL)

SUPPLY OF MANURE (ROSE MIXTURE)

SUPPLY OF MANURE (ORGANIC)

SUPPLY OF MANURE (SUPER PHOSPHET)

SUPPLY OF MANURE (BABEISTINE)

SUPPLY OF MANURE (ROGER)

PART-D (Upkeeping of Koyla Bhawan premises )

Up-keeping of service buildings including daily brooming, sweeping Mopping & cleaning of all the floors and dusting/cleaning of its adjacant walls for Entire koyla bhawan building Excluding Director's and CMD Chambers including collection of garbage at suitable places inside the Service Buildings and periphery of Koyla Bhawan as per instruction of Engineer-in-charge. (Area to be taken will be all service building brooming, sweeping Mopping & cleaning with dusting/cleaning of walls daily as per direction of EIC. (Total area to covered in one day is approximately 15500 sqm.) Clause(i) Minimum number of labour deployed per day will be 15.00 nos. in case of any deduction in sweeper, proportinate deduction will be made acordingly as per coverage of total area.

Up-keeping of service buildings by sweeping of road and road berm with jharu/machin including premises and surrounding areas including collection of garbage at suitable places inside the Service Buildings and periphery of Koyla Bhawan as per instruction of Engineer-in-charge. (Area to be taken will be all service Road, Basement, all parking, backside area of Koyla Bhawan building brooming daily.) Clause(i) Minimum number of labour deployed per day will be 2 nos. in case of any deduction in labour, proportinate deduction will be made acordingly as per total of area. SCOPE OF WORKS: (a)Frequency of brooming,cleaning and mopping should be at least once in a day or as directed by the engineer incharge as per site requirement (b) Maintenance work as desired by Engineer-in-charge on priority basis has to be strictly followed by the contractor (c) The contractor will look after the work and will maintain coordination with the department and will attend to the complaint.

Total impact of GST for the purpose of CTC

Please Enable Macros to View BoQ information