TENDER ENQURY FOR TUG-BC DUTT NR-20

HULL DEFECT LIST/ WORK PACKAGE - NR 20 IMPORTANT NOTE:- Following points are applicable for all relevant DL's and shipyards to consider and quote accordingly. (a) Shipyard to Hire suitable Marine Surveyors with adequate qualification and experience / IRS / LRS for Visual survey / USG survey. (b) All survey reports and certificates submitted to ship staff should be authenticated by ND(V)/MQC/MFAB (c) All load test certificates to be authenticated by ND(V)/MQC and load test to be carried out in presence of SS / QC. (d) All spare parts/ equipments/ machinery/oil/ grease/material to be procured, supplied by shipyard are to be cleared by SS prior application or fitment. (e) On completion of renewals/ repairs, a survey report (IN 379) as per Navy Standard Format in respect of entire U/W hull, decks and super structure to be prepared in 07 copies and submitted to COA / RMT / SS. (f) On completion of all UW jobs and DD routines and post final undocking of the vessel, a docking report as per Navy Standard Format in respect of entire U/W hull steel renewal and painting, internal UW compartments, UW valves, anodes etc to be prepared in 07 copies and submitted to SS. (g) All hot work job involves degutting and regutting of MFMB lagging and panelling in the vicinity of hot work area and in adjacent compartments. (h) Wherever complete paint scheme is to be renewed. Shipyard to procure from IHQ approved vendors (M/s Akzo Nobel, M/s Jotun)) and apply paint scheme accordingly. (j) Shipyard to undertake jobs / source material from IHQ approved vendors/ NCD/ specifications in all DL jobs where equipment replacement is required to be undertaken by Shipyard including Habitability upgradation jobs. (k) Renewal of Items / Spares:- (i) Renewal of items / spares wherever mentioned in the QDL to be undertaken by shipyard / firm as per the sample / drawing / details provided by SS / COA / RMT. (ii) Shipyard / Firm should undertake the routines / overhaul of the equipment including the mandatory spares required for undertaking the same, irrespective of the spares mentioned in the mandatory spares list provided by ND(V). (iii) Further, the cost should include the degutting of existing item, supply of new item, fitment and proving of the system post renewal.

HULL WORK PACKAGE 001 Docking- Vessel to be docked in both versions. Note 1:- Firms not to quote view docking, undocking and dock blocks preparation will be done by Navy and the job is required to be carried out in Navy Premises (i.e ND(V) slipway). Note 2:- Last date of Undocking -06 JUL 18

002 Hull Cleaning (a) Under Water and Boot Top Area HP jet clean entire under water area and boot top area (with a pressure not exceeding 3000 PSI) including ship side and remove the marine growth/barnacles and present for survey (a) U/W area: 310 Sqm, (b) Boot Top area: 40 Sqm

002 Hull Cleaning (b) Above Water Area including Bulwark HP jet clean entire Shipside (with a pressure not exceeding 3000 PSI) to remove the salts and contaminants from the surface and present for survey and present for survey

002 Hull Cleaning (c) Super Structure Area HP jet clean entire Shipside (with a pressure not exceeding 3000 PSI) to remove the salts and contaminants from the surface and present for survey and present for survey

002 Hull Cleaning (d) Weather Decks Area (including fittings) HP jet clean entire Weather Deck (with a pressure not exceeding 3000 PSI) remove salts and contaminants from the surface and present for survey

002 Hull Cleaning (e) Miscellanious Tanks Manually clean following tank and present for survey.The tanks should be washed out with fresh water and soap water to remoeve any sediment or dirt present in the tank Fore Peak Tanks,-01 Ballast Tanks/void sapce (02 Nos), Cable locker-01 Fresh water tanks -02 Fire fightining foam tanks -01 Cofferdams -02

002 Hull Cleaning (f) Internal Compartments - Engine Room and SRP compartment Manually clean following internal compartments and present for survey. (i) Engine room. (ii) SRP compartment

002 Hull Cleaning (g) Fuel Tanks Manually clean two in no. Fuel tanks with fresh water and soap water to remove any sediment or dirt present in the tank (a) Fuel Tank (02 nos) (b) RU Tanks (02 nos) (c) Lub Oil Tank

003 Hull survey (a) Visual Survey External and Internal Hull survey. Carry out visual and hammer survey (in the presence of QC representatives) in accordance with NO 01/15 of under water hull, boot top area, above water hull, super structure, weather decks and all internal compartments(i.e. FW tanks, ballast tanks, fore peak tank, engine room, steering compartment, FO tanks, cofferdams, Manholes ,all stiffeners and deck fittings etc.. Approx. area: 3000 Sqm Firm to submit 07 copies of Hull survey report . Firm to prove the welds by non-destructive tests and by hose test on completion of welding.

003 Hull survey (b) UTG Survey External and Internal Hull survey. Carry out UTG survey in the presence of QC representatives of U/W hull, ship side, superstrcture, weather deck, bulkheads, Tanks, living spaces covering entire part of hull. Firm to submit 07 copies of Hull survey report.

004 Steel Renewals Quote for steel renewal at various locations as per survey report. Note 1:- Quoted repair cost shall include cost of both sides blasted and primed Grade `A’ quality ship building steel for shell and IS 2062 Grade `B’ quality steel for non structural works, degutting/regutting/ renewal of all obstructions in way of steel renewals including lagging/panelling, minor fittings/ equipments with their foundations, ventilation systems, staging etc., as indicated by survey team / RMT, proving of the weld runs by non-destructive tests and by hose test on completion of welding, pressure testing and proving of tanks where steel renewal undertaken etc. Note 2:- Firms to indicate cost of new panelling(2mm thick) and Lagging (2" MFMB) material in the budgetary cost for 50 sqm each.

005 Build ups Carry out build ups as indicated by the Hull survey team/ Surveyor (a) 25 x 25 mm - 300 Nos

005 Build ups Carry out build ups as indicated by the Hull survey team/ Surveyor (b) 50 x50 mm - 150 Nos

006 Fairing Carryout fairing of deformed structures as indicated by Hull Survey Team/ Surveyor

007 Re-welding run Carry out re-welding runs on weld seams as indicated by Hull survey team/ QC/ RMT.

008 Sea tube (a) Hydro jet blasting, survey and pressure testing of sea tube including sea chest to be carried out. Dia - 300mm

008 Sea tube (b) carryout renewal of defective seatubes, OD-300mm, schedule 80.

009 Draught Marks Draught marks corroded/eaten away, to be renewed and painted. Both Roman and Numeric.

010 Sacrificial Anodes (a) Renew Sacrificial anodes (MK-IV) those consumed more than 50% Note:- Anodes Navy/COY supply.

010 Sacrificial Anodes (b) Renew Sacrificial anodes (MK- V) those consumed more than 50% Note:- Anodes Navy/COY supply.

011 Surface preparation Under Water area including Boot top area Grit blasting to SA 2.5 on the underwater areas for removal of U/W paint and application of Under water paint scheme as per NO 01/15

012 Painting Under Water Area including Boot top area - AKZO NOBEL Scheme. Paint under water area with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (a) 1st Coat: Primer - Intergard 269 primer -40-50 microns

012 Painting Under Water Area including Boot top area - AKZO NOBEL Scheme. Paint under water area with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (b) 2nd Coat: Anti Corrosive - Intersheild 300 (Aluminium) - 150 microns

012 Painting Under Water Area including Boot top area - AKZO NOBEL Scheme. Paint under water area with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (c) 3rd Coat: Anti Corrosive - Intersheild 300 (Bronze) - 150 microns

012 Painting Under Water Area including Boot top area - AKZO NOBEL Scheme. Paint under water area with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (d) 4th Coat: Tie Coat: Intergard 263 - 125 microns

012 Painting Under Water Area including Boot top area - AKZO NOBEL Scheme. Under Water Area - Painting - AKZO NOBEL Scheme. Paint under water area with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (e) 5th Coat: A/F: Intersmooth360(Brown) - 150 microns

012 Painting Under Water Area including Boot top area - AKZO NOBEL Scheme. Paint under water area with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (f) 6th Coat: A/F: Intersmooth360(Dark Red) - 150 microns

012 Painting Under Water Area including Boot top area - AKZO NOBEL Scheme. Paint under water area with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (g) 7th Coat: A/F: Intersmooth360(Brown) - 150 microns

012 Painting Under Water Area including Boot top area - AKZO NOBEL Scheme. Paint under water area with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (h) 8th Coat: A/F Intersmooth360 (Black) - 150 microns DFT

013 Surface prepartion Above Water Area and Bulwark including guardrails Grit blasting to SA 2.5 standard for paint application as per survey report by Paint OEM

014 Painting Above Water Area and Bulwark including guardrails - AKZO NOBEL Scheme. Paint above water area with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (a) 1st Coat: Intergard 269 50 microns DFT

014 Painting Above Water Area and Bulwark including guardrails - AKZO NOBEL Scheme. Paint above water area with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (b) 2nd Coat:Intergard 5600 (Grey) - 125 microns DFT

014 Painting Above Water Area and Bulwark including guardrails - AKZO NOBEL Scheme. Paint above water area with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (c) 3rd Coat: Intergard 5600 (Red) - 125 microns DFT

014 Painting Above Water Area and Bulwark including guardrails - AKZO NOBEL Scheme. Paint above water area with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (d) 4th Coat:Interthane 990 (Grey) - 60 microns DFT

015 Surface prepartion Super Structure and Deck Fittings Grit blasting to SA 2.5 standard standard as survey report of Paint OEM for paint application.

016 Painting Superstructure and Deck fittings - AKZO NOBEL Scheme. Paint super structure area with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (a) 1st Coat: Intergard 269 - 50 microns DFT

016 Painting Superstructure and Deck fittings - AKZO NOBEL Scheme. Paint super structure area with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (b) 2nd Coat:Intergard 5600 (Grey) - 125 microns DFT

016 Painting Superstructure and Deck fittings - AKZO NOBEL Scheme. Paint super structure area with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (c) 3rd Coat: Intergard 5600 (Red) - 125 microns DFT

016 Painting Superstructure and Deck fittings - AKZO NOBEL Scheme. Paint super structure area with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (d) 4th Coat:Interthane 990 (Grey) - 60 microns DFT

017 Surface prepartion Weather Deck and fittings Carry out hydro jet blasting to WJ 2 standard for paint application as per survey report by Paint OEM rep

018 Painting Weather Deck and fittings - AKZO NOBEL Scheme. Paint weather decks and fittings with following paint scheme. Note:- Quoted repair cost shall be inclusive of cost of paints also. (a) 1st Coat: primer - Intergard 269 -50 microns DFT

018 Painting Weather Deck and fittings - AKZO NOBEL Scheme. Paint weather decks and fittings with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (b) 2nd Coat: Intersheild 300 - 300 microns

018 Painting Weather Deck and fittings - AKZO NOBEL Scheme. paint with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (c) 3rd Coat: Intersheild 852 (Non Skid D.A. Grey) - 800 microns

019 Surface preparation Internal compartments -Tanks Carry out mechanical surface preparation to ST 3 standards for paint application whereever peeled off / paint defective in Fore Peak Tanks,-02 Ballast Tanks(02 Nos), Cable locker-01 Fresh water tanks -02 Fire fightining foam tanks -01 Cofferdams -02

020 Painting Fore peak Tank, Ballast tank, Cable locker , Cofferdam, Fresh water tanks and Fire fightining foam tanks - AKZO NOBEL Scheme. Paint fore peak tanks,cofferdams and cable locker with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (a) 1st Coat: primer - Intergard 269 -50 microns DFT

020 Painting Fore peak Tank, Ballast tank, Cable locker , Cofferdam, Fresh water tanks and Fire fightining foam tanks - AKZO NOBEL Scheme. . Paint fore peak tanks,cofferdams and cable locker with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (b) 2nd Coat: Anticorrosive Intershield 300 (Aluminum) - 150 microns

020 Painting Fore peak Tank, Ballast tank, Cable locker , Cofferdam, Fresh water tanks and Fire fightining foam tanks - AKZO NOBEL Scheme. . Paint fore peak tanks,cofferdams and cable locker with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (c) 3rd Coat: Anticorrosive Intershield 300 (Bronze) - 150 microns

021 Surface preparation Fresh water gravity tanks. Carry out mechanical cleaning to ST 3 standard as survey report of Paint OEM for paint application. Fresh water tanks, Foam tank and Fresh water gravity tanks

022 Painting Fresh water gravity tanks - AKZO NOBEL Scheme. AKZO NOBEL Scheme. Paint both fresh water tanks/ foam tanks with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (a) 1st Coat: Interline 850 - 150 microns DFT

022 Painting Fresh water gravity tanks - AKZO NOBEL Scheme. Paint both fresh water tanks/ foam tanks with following paint scheme:- note:- Quoted repair cost shall be inclusive of cost of paints also. (b) 2rd Coat: Interline 850 - 150 microns DFT

023 Surface Preparation Internal Compartments - Bilges of Engine Room and ASP Compartment Carry out mechanical cleaning to ST 3 standard as survey report of Paint OEM for paint application.

024 Painting Bilges of Engine Room and ASP Compartment - AKZO NOBEL Scheme. Paint bilges of Engine room and ASP compartment with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (a) 1st Coat: primer - Intergard 269 - 50 microns DFT

024 Painting Bilges of Engine Room and ASP Compartment - AKZO NOBEL Scheme. Paint bilges of Engine room and ASP compartment with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also (b) 2nd Coat: Anticorrosive - Intersheild 300 (Aluminium) - 150 microns

024 Painting Bilges of Engine Room and ASP Compartment - AKZO NOBEL Scheme. Paint bilges of Engine room and ASP compartment with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also (c) 3rd Coat: Anticorrosive - Intersheild 300 (Bronze) - 150 microns

025 Surface Preparation Bulkheads of Engine room and SRP compartments and living spaces. (a) Carry out mechanical cleaning to ST 3 standard as survey report of Paint OEM for Paint application.

025 Surface Preparation Bulkheads of Engine room and SRP compartments and living spaces. (b) Carry out mechanical cleaning to ST 1 standard as survey report of Paint OEM for paint application.

026 Painting Bulkheads of Engine room and SRP compartments and living spaces - Akzo Nobel Scheme. Paint bulkheads of Engine room and SRP compartments and living spaces ,with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (a) 1st Coat: primer - Intergard 269 - 50 microns DFT

026 Painting Bulkheads of Engine room and SRP compartments and living spaces - Akzo Nobel Scheme. Paint bulkheads of Engine room and SRP compartments and living spaces ,with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (b) 2nd Coat: White interior fire retradant paint(JSS 8010-72:2001-100 microns

026 Painting Bulkheads of Engine room and SRP compartments and living spaces - Akzo Nobel Scheme. Paint bulkheads of Engine room and SRP compartments and living spaces ,with following paint scheme:- Note:- Quoted repair cost shall be inclusive of cost of paints also. (c) 3nd Coat: White interior fire retradant paint(JSS 8010-72:2001-100 microns

027 Air Pressure Testing Air Pressure Test the following tanks to 0.14 Kg per Sq. Cms and rectify the defects any observed during pressure testing and prove. note:- APT and proving of those tanks wherein steel renewal undertaken as part of steel renewal DL. 0003(c) above is that of Firm's liability with No Additional Cost and those tanks where no steel renewals undertaken only would be considered for payment as per the indicated rates under this DL. Serial. Fresh Water Tank- 01 , Foam tank -01, Lub oil tank-01 , FO tank -02, FODS tank -02, Fore peak tank-01, Void space/Ballast tank -02

028 Bilge Platform plate (a) Renew bilge platform plate. Material- aluminium chequered plate, thickness- 05 mm

028 Bilge Platform Supporting brackets (b) Bilge platform supporting brackets at indicated locations to be renewed. Mat - ms

029 Key Fender securing arrangement (a) Removal of head and stern key fenders for hull survey.

029 Key Fender Head & Stern fenders Key Fender securing arrangement (b) Coaming plate and partition plates between fenders corroded, thinned and holed. All fittings to be renewed as per survey reports . Note: - Work involves removal of head and stern key fenders for hull survey and repair/ renewal of top and bottom securing brackets/ plates and partition plates. Top and bottom securing brackets/ plates and partition plates size: 130mm x 8mm thick

029 Key Fender Head & Stern fenders Key Fender securing arrangement (c) Renewal of nuts and bolts - M24 DIA , Length of bolt rod varies between 1225 mm to 620 mm.

029 Key Fender (d) All Head Key Fenders to be renewed with White colour fenders as per sizes. Specification - EPDM rubber as per NES 170.Crossection size 250mmx250mm. Length of fenders varies between 729mm to 633 mm. . Note: Quote for material only view services covered at sl (a)

029 Key Fender (e) All Aft Key Fenders to be renewed with White colour fenders as per size Crossection size 250mmx250mm. . Length of fenders varies between 1126mm to 520 mm. Note: Quote for material only view services covered at sl (a)

030 Tyre Fender Tyre fender damaged on P&S side to be renewed with used aircraft tyre fenders moulded with 8 mm layer of white natural rubber on top and outer sides. Mat- Rubber, colour-white. No painting or coating of any other form will be permitted. Vendors to adhere to SoW (a) OD 750mm; ID 450 mm , width - 350 mm

030 Tyre Fender Tyre fenders damaged on P&S side to be renewed with used automobile tyre fenders moulded with 8 mm layer of white natural rubber on top and outer sides. Mat- Rubber, colour-white. No painting or coating of any other form will be permitted. Vendors to adhere to SoW (a) Tyre fender OD-1400 mm ID -1000 mm Width -350 mm

031 Tyre Fender securing arrangement Tyre fender to be secured with 14 mm dia chain on head, stern and ship side (a) Securing chains: 14mm dia(Mat-GI)

031 Tyre Fender securing arrangement Tyre fender to be secured with D shackles on ship side (b) D Shackles 14 mm dia(Mat-GI)

031 Tyre Fender securing arrangement Securing chain is to be passed through metallic sleeves inserted into the tyre fenders (c) Securing sleeves of dia 03 inch and length 250 mm (Mat MS pipe of 06mm thick)

031 Tyre Fender securing arrangement Tyre fenders securing eye plates to bo be welded along ships side for connecting of securing chains (d)Eye plate thickness 8 mm. (Mat - MS)

032 Under water fenders (a) Underwater fenders to be removed, inspected and surveyed and necessary repairs to be attended on fender securing brackets(C Channel) and associted hull.

032 Under water fenders (b) ) All underwater Fenders to be renewed as per sample, Black colour fenders below water and above water fenders with Grey/white colour fenders to be renewed. Specification - EPDM rubber as per NES 170, D fenders Size--D Fender 250x250x1000mm

032 Underwater fenders securing arrangment (c) Fenders is to be secured with proper nut, bolt and washers as per sample. (Mat - MS with nickel coating), Nut & Bolt Dia -20 mm, bolt Length-370 mm, Washer dia-22mm) (Note : QUOTE FOR NUTS BOLTS AND ASSOCIATED ACCESSORIES also)

033 Metalic half pipe fender Metallic half pipe fender around the shipside to be repaired/renewed. (a) Size - 150mm dia, 08mm thick

033 Metalic half pipe fender Metallic half pipe fender around the shipside to be repaired/renewed. (b) Size - 160mm dia, 08 mm thick

034 Bulwark coaming Bulwark coaming coaming plate corroded and thinned. To be included in hull in survey and renew as per survey report. To be quoted under steel renewal. (a) Bulwark area

034 Bulwark coaming Bulwark coaming pipes corroded and thinned. To be included in hull in survey and renew as per survey report. To be quoted under steel renewal. (b) Pipe On Bulwark

034 Bulwark coaming (c) Frames deformed at various locations on weather deck including bulwark frames

035 Anchor and chain cable Anchor and Anchor chain cable and associated fittings are to be mechanically cleaned, eased for free movement, hydro jet blast chain cable to bare metal, paint with black bituminous paint post survey IAW NO 07/11 and refit back. Renew off all such parts which declared unservicebile & prove load test and submit load test certificate to CoY office. note : -The job involves removal of all anchor accessories, laying out and hydro jet blasting for survey and painting and final refitment post survey by ND (V) (a) Chain cable

035 Anchor and chain cable Anchor and Anchor chain cable and associated fittings are to be mechanically cleaned, eased for free movement, hydro jet blast chain cable to bare metal, paint with black bituminous paint post survey IAW NO 07/11 and refit back. Renew off all such parts which declared unservicebile & prove load test and submit load test certificate to CoY office. note : -The job involves removal of all anchor accessories, laying out and hydro jet blasting for survey and painting and final refitment post survey by ND (V) (b) Swivel piece

035 Anchor and chain cable Anchor and Anchor chain cable and associated fittings are to be mechanically cleaned, eased for free movement, hydro jet blast chain cable to bare metal, paint with black bituminous paint post survey IAW NO 07/11 and refit back. Renew off all such parts which declared unservicebile & prove load test and submit load test certificate to CoY office. note : -The job involves removal of all anchor accessories, laying out and hydro jet blasting for survey and painting and final refitment post survey by ND (V) (c) Lug less joining shackles

035 Anchor and chain cable Anchor and Anchor chain cable and associated fittings are to be mechanically cleaned, eased for free movement, hydro jet blast chain cable to bare metal, paint with black bituminous paint post survey IAW NO 07/11 and refit back. Renew off all such parts which declared unservicebile & prove load test and submit load test certificate to CoY office. note : -The job involves removal of all anchor accessories, laying out and hydro jet blasting for survey and painting and final refitment post survey by ND (V) (d) D Shackles

035 Anchor and chain cable Anchor and Anchor chain cable and associated fittings are to be mechanically cleaned, eased for free movement, hydro jet blast chain cable to bare metal, paint with black bituminous paint post survey IAW NO 07/11 and refit back. Renew off all such parts which declared unservicebile & prove load test and submit load test certificate to CoY office. note : -The job involves removal of all anchor accessories, laying out and hydro jet blasting for survey and painting and final refitment post survey by ND (V) (e) Anchors including spare anchor

036 Anchor windlass Overhaul Anchor windlass , prove for satisfactory operation. Note :- Overhaul involves removal of drum,gearbox, renewal of brake lining, OH of motor and ovrhaul of all these items and refitment.

037 Capstan Overhaul Q- deck capstan and prove for satisfactory operation. Dia 400 mm note :- Overhaul involves removal of drum,gearbox, renewal of brake lining, OH of motor and ovrhaul of all these items and refitment.

037 Single bollards (a) Single bollards corroded, thinned and holed. To be renewed as per survey report.Details :- Size of pipe: Single bollards ,Size: 250mm dia, 10 mm thickness, 1300 mm length. Doubler plate of dia 300mm and 10mm thick, dummy plate of 300mm dia and 12mm thick, supporting bracket of bollard pipe of 380mmx360mmx10mm. Tripping bracket of size 250mmx150mm and 03 no.s on each bollard.

037 Small twin Bollard (b) . Twin bollards corroded, thinned and holed. To be renewed as per survey report . Dia of bollard pipe 11 inch . Height of bollard 15 inch (02Nos). Size of bollard base/ foundation: 1.14Mtr x 0.4Mtr, Thickness of pipe: 10 mm. Doubler plate size: 125x49CM, thickness: 10mm

037 Twin Bollard (c) Large Twin bollards corroded, thinned. Entire bollard to be repaired/ renewed as per Hull survey report. Dia of bollard pipe 340 MM. Height of bollard 1400MM. Size of bollard base/ foundation1575X575X10 MM: , Thickness of pipe: 10 mm. Doubler plate size: 1575X575X10 MM , thickness: 10 mm, TRIPPING BRACKET 150X10 MM

038 Rubber beading Rubber beading of wt doors , hatches,scuttles perished/cracked to be renewed and chalk test to be proved. WT door. (a) Rubber beading size: 45mmx20mm; specification as per sample)

038 Rubber beading Operating clips of wt doors , hatches,scuttles sky light corroded/thinned to be renewed and chalk test to be proved. (b) WT door.Operating clips to be overhauled

039 WT Hatch metal coaming Metallic coaming of 05 in no WT Hatches on weather deck corroded and thinned. To be renewed as per survey report. Area - 20 Sqm.

040 NWT doors NWT wooden doors at various locations perished /damaged. To be renewed/repaired including frames.

041 Ventilation Following mushroom type ventilators to be removed, cleaned/ overhauled and fitted beck. (a) Dia: 550mm dia

041 Ventilation Following mushroom type ventilators to be removed, cleaned/ overhauled and fitted beck. (b) Dia - 360mm dia

042 Towing Hook Towing hook to be overhauled and load tested to 25 Tons . note 1 -The job involves overhaul of operating handle, steel wire rope and in way pullies. note 2 - Firm to project for load testing to CoY. Load testing will be undertaken by ND(VZG). Any defects occurred during load testing will be rectified by the firm.

043 Tanks/Manhole (a) Manholes including coaming to be renewed as per survey carried in DL No. 0003 Size of manhole: 720x520x08mm thick

043 Tanks/Manhole (c) Neoprene rubber joints of 720mmx520mmx06mm perished/deterioted to be renwed

043 Tanks/Manhole (d) Nuts and bolts/ studs of 16mm dia and 50mm length - 24 no.s on each manhole. Mat SS

044 Nav Light Nav light foundation (Port & Stbd) corroded, to be renewed. Size: 620mmx620mmx300mm and thickness 6mm, Mat MS

045 Drainage System (a) Deck Drain pipes corroded/ holed, to be renewed. Dia 2 1/2 inch. Mat: GI note : Pipes / fittings should be secured with rubber packings and clamps uniformly

045 Drainage System (b) Scupper with coaming of drain pipe ( leading from 01 deck to No. 1 deck and bridge top to platform deck corroded/ thinned, to be renewed. Size: 250mmx200mm

045 Drainage System (c ) Deck drain pieces on upper deck corroded, to be renewed. Dia 2 1/2 inch, each of length 01Mtr. note-The job involves removal/renewal and fitment of pipes/ panelling/ lagging/ trunking in the way.

045 Drainage System (d) 4" Soil pipes of Crew, ED's and Master's bathrooms to be removed chemically cleaned and fit back.

045 Drainage System (e) 4" Soil pipes of Crew, ED's and Master's bathrooms corroded/holed to be renewed

046 Extinguishers Provision of following extinguishers at various places. (a) 9 Ltr AFFF extinguisher

046 Extinguishers Provision of following extinguishers at varios places (b) 2 Kg CO2 Extinguisher

046 Extinguishers Provision of following extinguishers. (c) 10 Kg DCP extinguisher

046 Extinguishers Provision of following ff hoses at varios places (d) Fire hoses , Fire hoses length 15 mtr dia 63 mm with end coupling of AL

047 Foam solution Filling of Type 3% AFFF concentrate for forming mechanical foam for foam tank

48 Deck underlay Deck Covering to be repaired/ renewed at uprooted/ damaged/ steel renewed places, accommodation areas, Wheel house and wet compartments NOTE;-Dry Compt area-110 SQM, Wet Compt Area-30 SQM, Dadoes area- 15 SQM (a) Application of Underlay as per NCD 3717

048 Deck underlay Deck Covering to be repaired/ renewed at uprooted/ damaged/ steel renewed places, accommodation areas, Wheel house and wet compartments NOTE;-Dry Compt area-110 SQM, Wet Compt Area-30 SQM, Dadoes area- 15 SQM (b) Application of sealer coat and top coat on entire area As Per NCD 3717.

049 Lifebuoy Lifebuoys to be painted as per sample including lettering and symbols. Size: 300mmx100mmx06mm

050 Liferraft securing Stand Securing stand of Life rafts perished and damaged. To be renewed alongwith rubber lining and supporting frame, including fitment of HRG Mat- ms , Thickness- 06mm.

051 Name board Tug name board persihed/damaged , to be repaired /renewed , wherever required (a) Vessel iluminating board-01,

051 Name board Tug name board persihed/damaged , to be repaired /renewed including wooden pad. (b) Vessel name board- 02 including electopalting

051 Name board (c) Word letter of tug name on bulwark perished at fwd and stern , to be repaired/renewed, whererever required, tug name is to be painted with flourocent paint.

052 Door locks Mortise lock of non wt door defectice at various locations , All defective moritse locks to be renewed.

053 Locking arrangment Locking arrangement is to be provided in all the wt doors at various locations including hasp and staple arrangment

054 Sunmica Deck head sunmica damaged at various locations , to be repaired/renewed

055 MFMB lagging Degutting/reguttng of Mfmb lagging at accomodation area,wheel house to be carried out.

056 PIPE LINES Chemical cleanig of soil and fresh water pipe lines at various places , renewed/repaired if any defect.

057 Sanitry system WC of crew and master cabin corroded/thinned/holed to be repaired/renewed including base plate (a) .WC commode Note:- Quoted repair cost shall include cost all items.

057 Sanitry system wash basin including drain pipes of crew and master cabin corroded/thinned/holed to be repaired/renewed (b) wash basin including drain pipes Note:- Quoted repair cost shall include cost all items.

057 Sanitry system (c)SS tap: 1/2 inch damaged to be renewed. Note:- Quoted repair cost shall include cost all items.

057 Sanitry system (d).Supply pipes deformed to be renewed. Mat : Cu-Ni, Note:- Quoted repair cost shall include cost all items

057 Sanitry system (e) Drain pipe: Mat-MS,dia- 2‟‟ to be renewed. Note:- Quoted repair cost shall include cost all items

057 Sanitry system (f) Flush valves in WC corroded/thinned/holed to be renwed/repaied - Mat - Brass, Note:- Quoted repair cost shall include cost all items

057 Sanitry system (g) Mirror as per sample to be renewed. Note:- Quoted repair cost shall include cost all items

057 Sanitry system (h) SS stop cock 1’’ damaged to be renewed. Note:- Quoted repair cost shall include cost all items

057 Sanitry system (j) Fw pipe linescorroded/thinned/holed to be renewed. (Dia. 2 inch) (Mat - CuNi) Note:- Quoted repair cost shall include cost all items

057 Sanitry system (k) Shower head in bathrooms damaged i to be renewed. Note:- Quoted repair cost shall include cost all items

058 Panelling panelling in living spaces/whell house and other areas , damaged at varios locations , to be renewed/repaired. (Mat-Wood)

059 Kit Lockers Kit lockers in crew cabin and master cabin damaged to ber renewed/ repaired, (mat-CRCA)

060 Fisherman Plate Corroded/Thin/holed , to be renewed Mat-MS (a) Fish plate size: 20x20 inch, 10mm thickness

060 Fisherman Plate Corroded/Thin/holed , to be renewed Mat-MS ( b) Doubler plate size:28x28inch, 10 mm thickness

060 Fisherman Plate Corroded/Thin/holed , to be renewed Mat-MS (c) Angle bar 3 x1.5 inch

061 Butterfly nut SS butterfly nuts and tumbler bolt of engine room sky light &exhaust flaps broken. To be renewed. Dia of bolt : 20 mm & 6 inch length (Mat-SS) including rubber beading . Rmt-4 rmt

062 Guard rail Guard rails on 01 & 02 deck (Port side) corroded/perished . To be repaired/renewed. (Mat-GI Pipe) Dia of guard rail pipe:1 ¾’’,

063 Guard rail Securing chain Guard rails securing chain on 01 & 02 deck (Port side) corroded/perished . To be repaired/renewed. mat-GI

064 Non WT door Non water tight door of bridge and living spaces damaged including frames, to be repaired/renewed.

065 Ventilation Vent pipes of various tanks on upper deck corroded and thinned, to be renewed. (Mat. GI pipe).

066 Ventilation Wire mesh of all air vent corroded/perished. To be renewed.

067 Bulwark doors Bulwarks doors including hand rails on weather deck jammed /dented/damaged. To be renewed/ repaired.

068 Cleats MS cleats on (P & S) bulwark damaged, to be renewed including doubler plate . Size 28 MM

069 Boxes (a) Fire hoses securing boxes and its glass damaged at various locations , to be renewed/repaired

069 Boxes (b) Boxes of variuos control panel corroded/thinned/holed at varios locations, to be renewed as per existing as fitted sample. (Mat-MS)

070 Woodeen cup board Wooden lockers damaged at various locations to be repaired/renewed

071 Sofa Sofa cushion torned in ED ,Master and crew rest room , to be renewed.

072 Panneling SS panneling at indicated locations damged to be renewed.

073 Water Purifier Provision Of Drinking Water Purifier of 9 Ltr Capacity For Domestic Use In Galley And Crew Dinning Hall. Work Also Involves Fitment, Piping Arrangement And Commissioning Of The System. –With 02 Set Of Spares Including Filter And Membrane. Work Includes Provisioning Of Following Spares Also :- (a) RO Membrane Welded -02 , (b) RO Membrane High Flow-02 (c) Inline Carbon filter-02 , (d) Inline Sediment Filter- 02 , (e) Activated Carbon Filter (Excel Elite) , (f) Post Carbon Filter-02

074 Water Cooler Serviceability checks of water cooler in crew dining hall is to be carried out.capacity-20 ltr

075 Fixed H2s Sensor Provision of Fixed H2S sensors in the vicinity of STP compartment. (OEM - Hi-Point Services Pvt. Ltd.) Including installation of sensors and control pannel. Note:- Trial report along with H2S sensors calibration certificate by OEM to be submitted.

076 Portable H2S Sensors. Provision of Portable H2S sensors . (OEM - Hi-Point Services Pvt. Ltd.) Note:- Trial report alongwith H2S sensors calibration certificate by OEM to be submitted.

077 Bunk Bunk in crew rest room / master room damaged to be repaired

078 Wooden Panelling Panelling in living spaces/whell house and other areas , damaged at varios locations , to be renewed/repaired. Mat Sunmica

079 Seating arrangement Metalic seating arrangement on foxle corroded, thinned and holed. To be renewed. Size: 1500x750x700MM. Mat: MS Plate: 06MM thickness, Stand made of Angles and welded on deck.

080 Awning Repair of damaged awning shade frame at Foxle of Gi pipes and fitment of the same on fwd. a) Size: 2m x 5.5 m Approx. Mat: GI pipe

080 Awning Repair of damaged awning shade frame at aft side of Gi pipes and fitment of the same on fwd. and aft on weather deck area. (b) SIZE - 6 X 3 M Approx

080. PVC Awning PVC Awning at Foxle and at aft side (c) Renewel of PVC awning over the frame using securing rope. Mat - As per sample.

ENGINEERING WORK PACKAGE 1001 EQPT : FUEL TRANSFER PUMPS MAKE : ROYSONS, MODEL-SFGP-36,SL NO-300386, TYPE: ROTARY GEAR PUMP, Capacity : 06 CuM/hr,

1001, EQPT : FUEL TRANSFER PUMPS MAKE : ROYSONS, MODEL-SFGP-36,SL NO-300386, TYPE: ROTARY GEAR PUMP, Capacity : 06 CuM/hr, (a) Performance of pump is suboptimal.Pump to be overhauled, with replacement of shaft, mechanical seals, shaft key, bearings, and rotary gear.

1001, EQPT : FUEL TRANSFER PUMPS MAKE : ROYSONS, MODEL-SFGP-36,SL NO-300386, TYPE: ROTARY GEAR PUMP, Capacity : 06 CuM/hr, (b) Fitment and Alignment of pump with motor. Renewal of spider jaw copuling (qty-01) and all foundation nut and bolts (qty 04, M 20, Material -SS)

1001, EQPT : FUEL TRANSFER PUMPS MAKE : ROYSONS, MODEL-SFGP-36,SL NO-300386, TYPE: ROTARY GEAR PUMP, Capacity : 06 CuM/hr, (c) Suction and discharge pressure gauges(one each) to be replaced. Suction gauge Range -0.5 to 5 bar and discharge gauge reange 0 to 10 bar. The gauges should be glycerine filled.

1001, EQPT : FUEL TRANSFER PUMPS MAKE : ROYSONS, MODEL-SFGP-36,SL NO-300386, TYPE: ROTARY GEAR PUMP, Capacity : 06 CuM/hr, (d) Instrumentation gauges pipes (RMT- 02 mtrs) with suitable end fittings and isolating cock (qty-02) to be renewed. Mat: CuNi, Dia:1/4 inch.

1001, EQPT : FUEL TRANSFER PUMPS MAKE : ROYSONS, MODEL-SFGP-36,SL NO-300386, TYPE: ROTARY GEAR PUMP, Capacity : 06 CuM/hr, (e) Proving of Pump (working pressure 2 bar) on board with sytem line fitted, upto 6 bar relief pressure

1001, EQPT : FUEL TRANSFER PUMPS MAKE : ROYSONS, MODEL-SFGP-36,SL NO-300386, TYPE: ROTARY GEAR PUMP, Capacity : 06 CuM/hr, (f) Pump coupling guard (U shape with end plate Material -MS, thickness 2 mm) to be renewed, Gaurd Full Length 48 cm, width- 18 cm.

1002, GENERAL SERVICE PUMP, (Make : Jhonsons / SPX, Model : CH-50-200B4M2TL, Sl Nos :X901008002, 901008005

1002, GENERAL SERVICE PUMP, (Make : Jhonsons / SPX, Model : CH-50-200B4M2TL, Sl Nos :X901008002, 901008005 (a) Pump discharge pressure is low. Overhaul the pump completely and prove for satisfactory operation (Working pressure -6 Bar) . Overhaul shall include renewal of shaft, impeller, bearings, mechanical seal and shaft key.

1002, GENERAL SERVICE PUMP, (Make : Jhonsons / SPX, Model : CH-50-200B4M2TL, Sl Nos :X901008002, 901008005 (b) Fitment and Alignment of pump with motor. Renewal of spider jaw copuling (qty-01) and all foundation nut and bolts (qty 04, M 20, Material -SS)

1002, GENERAL SERVICE PUMP, (Make : Jhonsons / SPX, Model : CH-50-200B4M2TL, Sl Nos :X901008002, 901008005 (c) Suction and discharge pressure gauges to be renewed. Suction gauge Range -0.5 to 5 bar and discharge gauge reange 0 to 05 bar. The gauges should be glycerine filled.

1002, GENERAL SERVICE PUMP, (Make : Jhonsons / SPX, Model : CH-50-200B4M2TL, Sl Nos :X901008002, 901008005 (d) Instrumentation gauges pipes (RMT- 02 mtrs) with suitable end fittings and isolating cock (qty-02) to be renewed. Mat: CuNi, Dia:1/4 inch.

1002, GENERAL SERVICE PUMP, (Make : Jhonsons / SPX, Model : CH-50-200B4M2TL, Sl Nos :X901008002, 901008005 (e) Greasing cups of both pumps to be renewed

1002, GENERAL SERVICE PUMP, (Make : Jhonsons / SPX, Model : CH-50-200B4M2TL, Sl Nos :X901008002, 901008005 (f) Pump coupling guard (U shape with end plate Material -MS, thickness 2 mm) to be renewed, Gaurd Full Length 35 cm, width- 10 cm.

1003, EQPT/SYSTEM: FRESH WATER PUMPS, MAKE: BE PUMPS, MODEL- A03110K/MS-3/DGS-2/316, TYPE: SINGLE STAGE, SELF PRIMING, CENTRIFUGAL CAP: 2cu.m/hr, FIRM NOT TO QUOTE

1003, EQPT/SYSTEM: FRESH WATER PUMPS, MAKE: BE PUMPS, MODEL- A03110K/MS-3/DGS-2/316, TYPE: SINGLE STAGE, SELF PRIMING, CENTRIFUGAL CAP: 2cu.m/hr (a) Pump discharge pressure is low. Overhaul the pump completely and prove for satisfactory operation (Working pressure -2 Bar) . Overhaul shall include renewal of shaft, impeller, bearings, mechanical seal and shaft key.

1003, EQPT/SYSTEM: FRESH WATER PUMPS, MAKE: BE PUMPS, MODEL- A03110K/MS-3/DGS-2/316, TYPE: SINGLE STAGE, SELF PRIMING, CENTRIFUGAL CAP: 2cu.m/hr (b) Fitment and Alignment of pump with motor. Renewal of spider jaw copuling (qty-01) and all foundation nut and bolts (qty 04, M 20, Material -SS)

1003, EQPT/SYSTEM: FRESH WATER PUMPS, MAKE: BE PUMPS, MODEL- A03110K/MS-3/DGS-2/316, TYPE: SINGLE STAGE, SELF PRIMING, CENTRIFUGAL CAP: 2cu.m/hr (c) Suction and discharge pressure gauges to be renewed. Suction gauge Range -0.5 to 5 bar and discharge gauge reange 0 to 05 bar. The gauges should be glycerine filled.

1003, EQPT/SYSTEM: FRESH WATER PUMPS, MAKE: BE PUMPS, MODEL- A03110K/MS-3/DGS-2/316, TYPE: SINGLE STAGE, SELF PRIMING, CENTRIFUGAL CAP: 2cu.m/hr (d) Instrumentation gauges pipes (RMT- 02 mtrs) with suitable end fittings and isolating cock (qty-02) to be renewed. Mat: CuNi, Dia:1/4 inch.

1003, EQPT/SYSTEM: FRESH WATER PUMPS, MAKE: BE PUMPS, MODEL- A03110K/MS-3/DGS-2/316, TYPE: SINGLE STAGE, SELF PRIMING, CENTRIFUGAL CAP: 2cu.m/hr (e) Greasing cups of both pumps to be renewed

1003, EQPT/SYSTEM: FRESH WATER PUMPS, MAKE: BE PUMPS, MODEL- A03110K/MS-3/DGS-2/316, TYPE: SINGLE STAGE, SELF PRIMING, CENTRIFUGAL CAP: 2cu.m/hr (f) Pump coupling guard (U shape with end plate Material -MS, thickness 2 mm) to be renewed, Gaurd Full Length 35 cm, width- 10 cm.

1004, EQPT/SYSTEM: SRP COOLING SEA WATER PUMP, MAKE : BE PUMPS , Model A5110KK-DGS2-316, TYPE: SINGLE STAGE ,SELF PRIMING,CENTRIFUGAL , CAP : 15 M3/hr.

1004, EQPT/SYSTEM: SRP COOLING SEA WATER PUMP, MAKE : BE PUMPS , Model A5110KK-DGS2-316, TYPE: SINGLE STAGE ,SELF PRIMING,CENTRIFUGAL , CAP : 15 M3/hr. (a) Pump discharge pressure is low. Overhaul the pump completely and prove for satisfactory operation (Working pressure -2 Bar) . Overhaul shall include renewal of shaft, impeller, bearings, mechanical seal and shaft key

1004, EQPT/SYSTEM: SRP COOLING SEA WATER PUMP, MAKE : BE PUMPS , Model A5110KK-DGS2-316, TYPE: SINGLE STAGE ,SELF PRIMING,CENTRIFUGAL , CAP : 15 M3/hr. (b) Fitment and Alignment of pump with motor. Renewal of spider jaw copuling (qty-01) and all foundation nut and bolts (qty 04, M 20, Material -SS)

1004, EQPT/SYSTEM: SRP COOLING SEA WATER PUMP, MAKE : BE PUMPS , Model A5110KK-DGS2-316, TYPE: SINGLE STAGE ,SELF PRIMING,CENTRIFUGAL , CAP : 15 M3/hr. (c) Suction and discharge pressure gauges to be renewed. Suction gauge Range -0.5 to 5 bar and discharge gauge reange 0 to 05 bar. The gauges should be glycerine filled.

1004, EQPT/SYSTEM: SRP COOLING SEA WATER PUMP, MAKE : BE PUMPS , Model A5110KK-DGS2-316, TYPE: SINGLE STAGE ,SELF PRIMING,CENTRIFUGAL , CAP : 15 M3/hr. (d) Instrumentation gauges pipes (RMT- 02 mtrs) with suitable end fittings and isolating cock (qty-02) to be renewed. Mat: CuNi, Dia:1/4 inch.

1004, EQPT/SYSTEM: SRP COOLING SEA WATER PUMP, MAKE : BE PUMPS , Model A5110KK-DGS2-316, TYPE: SINGLE STAGE ,SELF PRIMING,CENTRIFUGAL , CAP : 15 M3/hr. (e) Greasing cups of both pumps to be renewed

1004, EQPT/SYSTEM: SRP COOLING SEA WATER PUMP, MAKE : BE PUMPS , Model A5110KK-DGS2-316, TYPE: SINGLE STAGE ,SELF PRIMING,CENTRIFUGAL , CAP : 15 M3/hr. (f) Pump coupling guard (U shape with end plate Material -MS, thickness 2 mm) to be renewed, Gaurd Full Length 35 cm, width- 10 cm.

1004, EQPT/SYSTEM: SRP COOLING SEA WATER PUMP, MAKE : BE PUMPS , Model A5110KK-DGS2-316, TYPE: SINGLE STAGE ,SELF PRIMING,CENTRIFUGAL , CAP : 15 M3/hr. (g) Pump foundation frame ( angle bar of 30 cm by 90 cm,Mat- MS) deteriorted. To be renewed

1005, If Sr 1004 (a) , pump is BER, by the time Refit starts, then Renew BE Bare Pump with coupling, Model A5110KK-DGS2-316,

1006, EQPT/SYSTEM: ENGINE DRIVEN FIRE PUMPS MAKE: BE PUMPS, MODEL- M2022kk/RR-DGS2-316 TYPE: TWO STAGE,CENTRIFUGAL PUMP, CAP: 3000CuM/hr,

1006, EQPT/SYSTEM: ENGINE DRIVEN FIRE PUMPS MAKE: BE PUMPS, MODEL- M2022kk/RR-DGS2-316 TYPE: TWO STAGE,CENTRIFUGAL PUMP, CAP: 3000CuM/hr, (a) Carry out major Overhaul of the pump and prove for satisfactory operation. Renew all parts namely shaft , impeller, seals, bearings.

1006, EQPT/SYSTEM: ENGINE DRIVEN FIRE PUMPS MAKE: BE PUMPS, MODEL- M2022kk/RR-DGS2-316 TYPE: TWO STAGE,CENTRIFUGAL PUMP, CAP: 3000CuM/hr, (b) Casing to be chemically cleaned and checked for pitting. Metal buildup to be carried out on five locations with 3 mm dia, 3 mm deep pits, followed by surface finishing

1006, EQPT/SYSTEM: ENGINE DRIVEN FIRE PUMPS MAKE: BE PUMPS, MODEL- M2022kk/RR-DGS2-316 TYPE: TWO STAGE,CENTRIFUGAL PUMP, CAP: 3000CuM/hr, (c) Suction and discharge pressure gauges to be renewed. Suction gauge Range -0.5 to 5 bar and discharge gauge reange 0 to 15 bar. The gauges should be glycerine filled.

1006, EQPT/SYSTEM: ENGINE DRIVEN FIRE PUMPS MAKE: BE PUMPS, MODEL- M2022kk/RR-DGS2-316 TYPE: TWO STAGE,CENTRIFUGAL PUMP, CAP: 3000CuM/hr, (d) Instrumentation gauges pipes (RMT- 02 mtrs) with suitable end fittings and isolating cock (qty-02) to be renewed. Mat: CuNi, Dia:1/4 inch.Renew suction and discharge bellows.

1006, EQPT/SYSTEM: ENGINE DRIVEN FIRE PUMPS MAKE: BE PUMPS, MODEL- M2022kk/RR-DGS2-316 TYPE: TWO STAGE,CENTRIFUGAL PUMP, CAP: 3000CuM/hr, (e)Carry out alignment of pump with power take off assembly & engine.

1007, ENGINE DRIVEN FIRE PUMP POWER TAKE OFF ASSEMBLY Make : Twin Disc power transmission Eqpt Ltd Model: SL 214 P 101, (a) Check and inspect the gear mechanism/tooth of gear box.

1007, ENGINE DRIVEN FIRE PUMP POWER TAKE OFF ASSEMBLY Make : Twin Disc power transmission Eqpt Ltd Model: SL 214 P 101, (b) Check and inspect the bearings of gear box.if found defective to be Replaced.

1007, ENGINE DRIVEN FIRE PUMP POWER TAKE OFF ASSEMBLY Make : Twin Disc power transmission Eqpt Ltd Model: SL 214 P 101, (c) Carry out overhauling of clutch-in & declutch mechanism.

1007, ENGINE DRIVEN FIRE PUMP POWER TAKE OFF ASSEMBLY Make : Twin Disc power transmission Eqpt Ltd Model: SL 214 P 101, (d) Renew gear box oil with fresh oil.oil to be provided

1007, ENGINE DRIVEN FIRE PUMP POWER TAKE OFF ASSEMBLY Make : Twin Disc power transmission Eqpt Ltd Model: SL 214 P 101, (e)Carry out alignment of pump with power take off assembly & engine.

1007, ENGINE DRIVEN FIRE PUMP POWER TAKE OFF ASSEMBLY Make : Twin Disc power transmission Eqpt Ltd Model: SL 214 P 101, (f) Pump to be proved for satisfactory perfomance post work completion.

1008, EQPT : DD COMPRESSOR ENGINE, MAKE : GREAVES , MODEL - 1080, SL NO- A4A24423,POWER-6.1HP,RPM-3000, TYPE: SINGLE CYLINDER, Complete overhaul of engine to be carried out involving the following:-

1008, EQPT : DD COMPRESSOR ENGINE, MAKE : GREAVES , MODEL - 1080, SL NO- A4A24423,POWER-6.1HP,RPM-3000, TYPE: SINGLE CYLINDER, Complete overhaul of engine to be carried out involving the following:- (a) Renew injector.

1008, EQPT : DD COMPRESSOR ENGINE, MAKE : GREAVES , MODEL - 1080, SL NO- A4A24423,POWER-6.1HP,RPM-3000, TYPE: SINGLE CYLINDER, Complete overhaul of engine to be carried out involving the following:- (b) Overhaul FIP and Governor assembly

1008, EQPT : DD COMPRESSOR ENGINE, MAKE : GREAVES , MODEL - 1080, SL NO- A4A24423,POWER-6.1HP,RPM-3000, TYPE: SINGLE CYLINDER, Complete overhaul of engine to be carried out involving the following:- (c) Cylinder liner to be checked for clearances.

1008, EQPT : DD COMPRESSOR ENGINE, MAKE : GREAVES , MODEL - 1080, SL NO- A4A24423,POWER-6.1HP,RPM-3000, TYPE: SINGLE CYLINDER, Complete overhaul of engine to be carried out involving the following:- (d) Both big end and small end bearings of connecting rod to be to be cheked for wear down.

1008, EQPT : DD COMPRESSOR ENGINE, MAKE : GREAVES , MODEL - 1080, SL NO- A4A24423,POWER-6.1HP,RPM-3000, TYPE: SINGLE CYLINDER, Complete overhaul of engine to be carried out involving the following:- (e) Bearings of shaft to be renewed

1008, EQPT : DD COMPRESSOR ENGINE, MAKE : GREAVES , MODEL - 1080, SL NO- A4A24423,POWER-6.1HP,RPM-3000, TYPE: SINGLE CYLINDER, Complete overhaul of engine to be carried out involving the following:- (f) Lub oil sump to be drained, cleaned.replenished(sump capacity 5 liters)

1008, EQPT : DD COMPRESSOR ENGINE, MAKE : GREAVES , MODEL - 1080, SL NO- A4A24423,POWER-6.1HP,RPM-3000, TYPE: SINGLE CYLINDER, Complete overhaul of engine to be carried out involving the following:- (g) Renew air filter element

1008, EQPT : DD COMPRESSOR ENGINE, MAKE : GREAVES , MODEL - 1080, SL NO- A4A24423,POWER-6.1HP,RPM-3000, TYPE: SINGLE CYLINDER, Complete overhaul of engine to be carried out involving the following:- (h) Renew Fuel oil filters element .

1008, EQPT : DD COMPRESSOR ENGINE, MAKE : GREAVES , MODEL - 1080, SL NO- A4A24423,POWER-6.1HP,RPM-3000, TYPE: SINGLE CYLINDER, Complete overhaul of engine to be carried out involving the following:- (j) Overhauling and decarbonisation of cylinder head valves to be carried out

1008, EQPT : DD COMPRESSOR ENGINE, MAKE : GREAVES , MODEL - 1080, SL NO- A4A24423,POWER-6.1HP,RPM-3000, TYPE: SINGLE CYLINDER, Complete overhaul of engine to be carried out involving the following:- (k) Renew piston rings/compression rings.

1008, EQPT : DD COMPRESSOR ENGINE, MAKE : GREAVES , MODEL - 1080, SL NO- A4A24423,POWER-6.1HP,RPM-3000, TYPE: SINGLE CYLINDER, Complete overhaul of engine to be carried out involving the following:- (l) Battery start arrangment of engine Including provisioning of starter, starter motor / dynamo, drive belt and battery (12V), non ops. System to be proved for operation

1008, EQPT : DD COMPRESSOR ENGINE, MAKE : GREAVES , MODEL - 1080, SL NO- A4A24423,POWER-6.1HP,RPM-3000, TYPE: SINGLE CYLINDER, Complete overhaul of engine to be carried out involving the following:- (m) Renew insulation(hot lagging and cloth caldding) of the exhaust pipe..

1008, EQPT : DD COMPRESSOR ENGINE, MAKE : GREAVES , MODEL - 1080, SL NO- A4A24423,POWER-6.1HP,RPM-3000, TYPE: SINGLE CYLINDER, Complete overhaul of engine to be carried out involving the following:- (n) Renew Oil presure gauge (1-10 bar, glycerine fiiled analogue gauge )

1008, EQPT : DD COMPRESSOR ENGINE, MAKE : GREAVES , MODEL - 1080, SL NO- A4A24423,POWER-6.1HP,RPM-3000, TYPE: SINGLE CYLINDER, Complete overhaul of engine to be carried out involving the following:- (p) Engine to be proved for satisfactory performance for atleast 45 minutes of running with all parametrs in satisfactory range

1008 (a) , EQPT : DD COMPRESSOR ENGINE, Repalce liners and o-rings

1008 (b), EQPT : DD COMPRESSOR ENGINE, Renew big end and small end bearing

1008 (c), EQPT : DD COMPRESSOR ENGINE, All safety/relief valve to be reset for correct operation

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:-

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (a) Both big end and small end bearings of connecting rod to be renewed.

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (b) Bearings of shaft to be renewed.

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (c) Lub oil sump to be drained and cleaned.(sump capacity 7 ltrs)

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (d) Cylinder suction and disharge valve to be renewed.

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (e) Piston rings to be renewed.

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (f) Air inlet filter element of compressor to be renewed.

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (g) Instrumentation gauges pipes with suitable end fittings and needle valve to be renewed mat: CuNi dia:1/4”

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (h) Pressure gauges (glycerine filled) to be renewed. range 0- 60 bar

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (j) Air system isolating cocks to be renewed. Size- 01 inch

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (k) Pressure gauge (glycerine filled) and Pressure switch isolating needle valve to be renewed. Size- 1/4 inch

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (l) Renew Pressure switch (Model KP 36, Make: Danfoss)

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (m) Inline Oil / water separator of compressors to be cleaned.

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (n) Chemical cleaning and pressure testing of air bottles to be carried out capacity: 250ltrs Test Presure: 45 bar

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (p) Relief valves in air system and on air bottles to be renewed and set at Relief Pr.-35 Kg/cm2. Dia- 2.5mm

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (q)Air bottle filling valve to be overhauling

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (r) Cooling fan to be cleaned, inspected and fitted back

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (s) Drive belts of both compressors to be renewed size B71

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (t) Drive belts guard of both compressors to be renewed. Size 1 mtr lenhth, 0.5 mtr height, 15 cm witdh, Material - Wire Mesh,mesh void space -10 mm square, dia of wire- 3 mm, Material - steel

1009, EQPT: AIR COMPRESSOR , MAKEL: ELGI, MODEL- HP -05- 300, Cap-12.4m3/hr@30kg/cm2. TYPE: 2 STAGE RECIPROCATING TYPE, CAP: 200LPM, Complete overhaul of compressors to be carried out involving the following:- (u) Compressor to be boxed back , fitted on foundation , aligned with engine and proved for satisfactory performance. SS bolts and nuts, M20, Qty- 10

1010, EQPT/SYSTEM: VALVES Following valves to be overhauled and pressure tested. Test Pressure 5 kg/cm2 (a) 300mm Valves, Type- SD, Material- Gun Metal

1010, EQPT/SYSTEM: VALVES Following valves to be overhauled and pressure tested. Test Pressure 5 kg/cm2 (b) 200mm Valves, Type - SD, Material- Gun Metal

1010, EQPT/SYSTEM: VALVES Following valves to be overhauled and pressure tested. Test Pressure 5 kg/cm2 (c) 100mm valves, Type - SD, Material- Gun Metal

1010, EQPT/SYSTEM: VALVES Following valves to be overhauled and pressure tested. Test Pressure 5 kg/cm2 (d) 80mm valves, Type - SDNR, Material- Gun Metal

1010, EQPT/SYSTEM: VALVES Following valves to be overhauled and pressure tested. Test Pressure 5 kg/cm2 (e) 65mm Valves, Type - SDNR, Material- Gun Metal

1010, EQPT/SYSTEM: VALVES Following valves to be overhauled and pressure tested. Test Pressure 5 kg/cm2 (f) 50mm Valves, Type - SD, Material- Bronze

1010, EQPT/SYSTEM: VALVES Following valves to be overhauled and pressure tested. Test Pressure 5 kg/cm2 (g) 40mm Valves, Type - SD, Material- Bronze

1010, EQPT/SYSTEM: VALVES Following valves to be overhauled and pressure tested. Test Pressure 5 kg/cm2 (h) 32mm Valves, Type - SD, Material- Bronze

1010, EQPT/SYSTEM: VALVES Following valves to be overhauled and pressure tested. Test Pressure 5 kg/cm2 (j) 20 mm valves, Type - SD , Mat - Bronge

1010, EQPT/SYSTEM: VALVES Following valves to be overhauled and pressure tested. Test Pressure 5 kg/cm2 (k) 25mm , Type - SD, Material- Gun Metal

1010, EQPT/SYSTEM: VALVES Following valves to be overhauled and pressure tested. Test Pressure 5 kg/cm2 (l) Reducers (50mm) , Materila- Gun metal

1010, EQPT/SYSTEM: VALVES Following valves to be overhauled and pressure tested. Test Pressure 5 kg/cm2 (m)Relief Valves (50mm), Material- Bronze

1010, EQPT/SYSTEM: VALVES Following valves to be overhauled and pressure tested. Test Pressure 5 kg/cm2 (n) Fire hydrant chest valves, Mat:Bronze, 2X4 valves, 65 mm

1010, EQPT/SYSTEM: VALVES Following valves to be overhauled and pressure tested. Test Pressure 5 kg/cm2 (p) Fire hydrants ( valves) , Mat:Bronze, 65 mm

1010, EQPT/SYSTEM: VALVES Following valves to be overhauled and pressure tested. Test Pressure 5 kg/cm2 (q) Fire hydrants ( valves) , Mat:Bronze, 65 mm, to be renewed.

1011, EQPT/SYSTEM: STRAINERS Following system strainers to be manufactured as per sample, Strainer, 3 mm hole dia, spaced 5 mm apart, with zig zag position of holes

1011, EQPT/SYSTEM: STRAINERS Following system strainers to be manufactured as per sample, Strainer, 3 mm hole dia, spaced 5 mm apart, with zig zag position of holes (a) Main supply manifold strainers Dia 300mm, Material:- Brass, thickness- 3 mm

1011, EQPT/SYSTEM: STRAINERS Following system strainers to be manufactured as per sample, Strainer, 3 mm hole dia, spaced 5 mm apart, with zig zag position of holes (b) Main engine cooling water strainers Dia 80mm, Mat: Brass, thick- 3 mm

1011, EQPT/SYSTEM: STRAINERS Following system strainers to be manufactured as per sample, Strainer, 3 mm hole dia, spaced 5 mm apart, with zig zag position of holes (c) Bilges pumping out strainers Dia 65mm,Material:- Brass, thickness- 3 mm

1011, EQPT/SYSTEM: STRAINERS Following system strainers to be manufactured as per sample, Strainer, 3 mm hole dia, spaced 5 mm apart, with zig zag position of holes (d) E/D sea water pump main suction strainers Dia 200mm,Material:- Brass, thickness- 3 mm

1011, EQPT/SYSTEM: STRAINERS Following system strainers to be manufactured as per sample, Strainer, 3 mm hole dia, spaced 5 mm apart, with zig zag position of holes (e) Foam system inline strainer Dia 30 mm,Material:- Brass, thickness- 3 mm

1011, EQPT/SYSTEM: STRAINERS Following system strainers to be manufactured as per sample, Strainer, 3 mm hole dia, spaced 5 mm apart, with zig zag position of holes (f) Fresh water pump suction foot valve 32 mm,Material:- Brass, thickness- 2 mm

1011, EQPT/SYSTEM: STRAINERS Following system strainers to be manufactured as per sample, Strainer, 3 mm hole dia, spaced 5 mm apart, with zig zag position of holes (g) SRP lub oil cooler sea water system inlet side strainer body to be replaced, including strainer, Body- Material -SS, Strainer material -Brass, Body dimension 12 cm dia, ht- 16 cm, Strainer dimension - Dia 10 cm and ht 15 cm

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code.

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code. (a) 300 mm main sea chest Port inter connection pipe (Fwd).

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code. (b) 300 mm main sea chest Stbd inter connection pipe (Fwd).Test Pr. 5 Bar

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code. (c) Dia.- 200mm Sea water system pipe Mat: CuNi,

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code. (d) Dia.- 200mm Fire Pump Discharge pipe Mat: GI

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code. (e) Dia.-80mm Pipe Sea water system pipe Mat: CuNi

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code. (f) Dia.-100mm Sea water system pipe Mat: CuNi

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code. (g) Dia.-65mm Sea water system pipe Mat: C

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code. (h) Dia.-60mm Sea water system pipe Mat: GI

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code. (j) Dia.-50mm Sea water system pipe Mat: CuNi

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code. (k) Dia.-32mm fresh water system pipes Mat: Seemless Copper

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code. (l) Dia.-25mm Fuel line pipes Mat: Seamless Steel

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code. (m) Dia.-40 mm air system pipe Mat: Stailess Steel

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code. (n) Dia.-20 mm air system pipe Mat: Staineless Steel

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code. (p) 200 mm sea chest strainer body to be chemically cleaned, and internally and external painted.

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code. (q) 300 mm sea chest strainer body to be chemically cleaned and and internally and external painted.

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code. STBD side main deck fittings For chemical cleaning

1012 STBD side main deck fittings For chemical cleaning (a) Fire line deck fitting stbd(Dia-65mm) Length-220mm

1012 STBD side main deck fittings For chemical cleaning (b) fuel oil tank vent pipe , Dia-100mm,Length-300mm

1012 STBD side main deck fittings For chemical cleaning (c) Sea chest vent pipe,dia-50mm (Engine Room,Length-1200mm)

1012 STBD side main deck fittings For chemical cleaning (d) Oil tank vent pipe,Dia-50mm(Engine Room) Deck fitting,Length-300mm

1012 STBD side main deck fittings For chemical cleaning (e) Fire line deck fitting stbd(Dia-65mm),Length-220mm

1012 STBD side main deck fittings For chemical cleaning (f) Sea chest vent pipe,dia-50mm,Length-1500mm

1012 STBD side main deck fittings For chemical cleaning (g) Fresh water tank vent pipe deck fitting 65mm,Length-220mm

1012 STBD side main deck fittings For chemical cleaning (h) Fore peak tank deck fittings,Dia-50mm,Length-220mm

1012 STBD side main deck fittings For chemical cleaning (j) Fore peak vent pipe Dia-50mm,Length-220mm,Deck fitting

1012 STBD side main deck fittings For chemical cleaning (k) Fore peak tank 50mm Pipe Length-1500mm

1012 STBD side main deck fittings For chemical cleaning (j) Fore peak sounding pipe 50mm,Length-4000mm

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code. PORT side main deck fittings for chemical cleaning

1012 PORT side main deck fittings for chemical cleaning (a) Fore peak tank filling line ,Dia-65mm,Length-220mm, Deck fitting

1012 PORT side main deck fittings for chemical cleaning (b) Sea chest vent pipe fitting,Dia-50mm,length-220mm,Deck fitting

1012 PORT side main deck fittings for chemical cleaning (c) STP vent pipe ,Dia-50mm,Length-2700mm

1012 PORT side main deck fittings for chemical cleaning (d) Fuel oil filling pipe,Dia-40mm,Length-220mm,Deck fitting

1012 PORT side main deck fittings for chemical cleaning (e) Fuel oil filling pipe,Dia-40mm,Length-450mm,Deck fitting

1012 PORT side main deck fittings for chemical cleaning (f) Sea chest deck fitting,Dia-50mm,Length-220mm

1012 PORT side main deck fittings for chemical cleaning (g) Fuel oil tank filling pipe (engine room),Dia-50mm,Length-220mm,Deck fitting

1012 PORT side main deck fittings for chemical cleaning (h) Fuel oil tank filling pipe ,Dia-50mm,Length-700mm,

1012 PORT side main deck fittings for chemical cleaning (j) Fuel oil tank vent pipe , Dia-50mm,Length-480mm

1012 PORT side main deck fittings for chemical cleaning (k) Fuel oil tank vent pipe,Dia-50mm,Length-220mm

1012 PORT side main deck fittings for chemical cleaning (l) Fire line deck fitting,Dia-65mm,Length-250mm

1012 PORT side main deck fittings for chemical cleaning (m) Fore peak tank Filling pipe,Dia-50mm,Length-4500mm

1012, EQPT/SYSTEM: SYSTEM PIPES FOR CHEMICAL CLEANING Following system pipes to be removed, chemically cleaned , pressure tested ( 1.5 times WP) and post fitment painted as per colour code. Following system pipes to be renewed

1012 Following system pipes to be renewed (a) Dia.- 200mm Fire Pump Discharge pipe Mat: GI

1012 Following system pipes to be renewed (b) Dia.-80mm sea water system pipe Mat: CuNi,along with flanges.

1012 Following system pipes to be renewed (c) Dia.-100mm sea water system pipe Mat: CuNi

1012 Following system pipes to be renewed (d) Dia.-65mm sea water system pipe mat: CuNi

1012 Following system pipes to be renewed (e) Dia.-60mm Engine Room Bilge Sytem pipe Mat: GI

1012 Following system pipes to be renewed (f) Dia.-60mm Foam Tank Discharge pipe Mat: GI

1012 Following system pipes to be renewed (g) Dia.-50mm sea water system pipe Mat: CuNi

1012 Following system pipes to be renewed (h) Dia.-25mm Fuel line pipes Mat: Cast Steel Seemless

1012 Following system pipes to be renewed (j) Dia.-32mm fresh water system pipes Mat: Seemless Copper

1012 Following system pipes to be renewed (k) Dia.-40 mm air system pipe Mat: Seamless Steel

1012 Following system pipes to be renewed (l) Dia.-20 mm air system pipe Mat: Seamless Steel

1013, EQPT/SYSTEM: FOAM SYSTEM/ FOAM GUNS (a) Foam guns to be cleaned and painted (red).

1013, EQPT/SYSTEM: FOAM SYSTEM/ FOAM GUNS (b) All perished rubber fittings (80 mm dia, 5 mm thick) to be renewed.

1013, EQPT/SYSTEM: FOAM SYSTEM/ FOAM GUNS (c) Foam gun drive gearboxes to be overhauled and free for movement

1013, EQPT/SYSTEM: FOAM SYSTEM/ FOAM GUNS (d) Foam tank isolating valves to be overhauled 50mm SDNR (GM)

1013, EQPT/SYSTEM: FOAM SYSTEM/ FOAM GUNS (e) 50mm SDNR (GM) to be renewed if BER

1013, EQPT/SYSTEM: FOAM SYSTEM/ FOAM GUNS (f) Worm gear assembly to be dismantled cleaned and fitted back.

1013, EQPT/SYSTEM: FOAM SYSTEM/ FOAM GUNS (g) Couplings shaft locking pins (dai 05 mm,10 mm long) to be renewed.

1013, EQPT/SYSTEM: FOAM SYSTEM/ FOAM GUNS (h) Three way flushing valve to be overhauled 50mm

1013, EQPT/SYSTEM: FOAM SYSTEM/ FOAM GUNS (j) Overhaul of foam system propotionator to be carried out

1014, EQPT/SYSTEM: CO2 EXTINGUISHING SYSTEM, MAKE: NEW FIRE ENGINEERS PVT LIMITED (a) All CO2 cylinders to be weighed and recharged with 45kg CO2 each.Certificate to be provided.

1014, EQPT/SYSTEM: CO2 EXTINGUISHING SYSTEM, MAKE: NEW FIRE ENGINEERS PVT LIMITED (b) Non return valves on cylinder heads to be overhauled.safety valve discs to be renewed.valves to be pressure tested post overhauling

1014, EQPT/SYSTEM: CO2 EXTINGUISHING SYSTEM, MAKE: NEW FIRE ENGINEERS PVT LIMITED (c) All CO2 discharge nozzles to be opened, cleaned and fitted back.

1014, EQPT/SYSTEM: CO2 EXTINGUISHING SYSTEM, MAKE: NEW FIRE ENGINEERS PVT LIMITED (d) Overhaul of shuttle valve

1014, EQPT/SYSTEM: CO2 EXTINGUISHING SYSTEM, MAKE: NEW FIRE ENGINEERS PVT LIMITED (e) Overhaul of relief valve assembly

1014, EQPT/SYSTEM: CO2 EXTINGUISHING SYSTEM, MAKE: NEW FIRE ENGINEERS PVT LIMITED (f) Overhaul of pressure operated switch

1014, EQPT/SYSTEM: CO2 EXTINGUISHING SYSTEM, MAKE: NEW FIRE ENGINEERS PVT LIMITED (g) Complete drenching system piping to be blown through using HP air to prove system free of blockages

1014, EQPT/SYSTEM: CO2 EXTINGUISHING SYSTEM, MAKE: NEW FIRE ENGINEERS PVT LIMITED (h) All CO2 cylinders (45 kg capacty) and system pipes to be painted as per coding post work completion.

1014, EQPT/SYSTEM: CO2 EXTINGUISHING SYSTEM, MAKE: NEW FIRE ENGINEERS PVT LIMITED (j) All system pipes (dia-20 mm) to be painted as per coding post work completion.

1015, EQPT/SYSTEM: MARINE SANITATION DEVICE (STP), MAKE/MODEL: EXCELTEC OMNIPURE 7ME, CAP: 1200 GAL/DAY (a) Surge tanks to be chemically cleaned

1015, EQPT/SYSTEM: MARINE SANITATION DEVICE (STP), MAKE/MODEL: EXCELTEC OMNIPURE 7ME, CAP: 1200 GAL/DAY (b) Macerators pump to be overhauled. Baldor wash down 1hp

1015, EQPT/SYSTEM: MARINE SANITATION DEVICE (STP), MAKE/MODEL: EXCELTEC OMNIPURE 7ME, CAP: 1200 GAL/DAY (c) Overboard pump to be overhauled. Baldor dirty duty 1hp

1015, EQPT/SYSTEM: MARINE SANITATION DEVICE (STP), MAKE/MODEL: EXCELTEC OMNIPURE 7ME, CAP: 1200 GAL/DAY (d) 12mm needle valves to be renewed

1015, EQPT/SYSTEM: MARINE SANITATION DEVICE (STP), MAKE/MODEL: EXCELTEC OMNIPURE 7ME, CAP: 1200 GAL/DAY (e) Ventury to be dismantled cleaned internally and boxed back

1015, EQPT/SYSTEM: MARINE SANITATION DEVICE (STP), MAKE/MODEL: EXCELTEC OMNIPURE 7ME, CAP: 1200 GAL/DAY (f) Inline strainer to be dismantled and strainer element to be renewed

1015, EQPT/SYSTEM: MARINE SANITATION DEVICE (STP), MAKE/MODEL: EXCELTEC OMNIPURE 7ME, CAP: 1200 GAL/DAY (g) Air filter element to be renewed.

1015, EQPT/SYSTEM: MARINE SANITATION DEVICE (STP), MAKE/MODEL: EXCELTEC OMNIPURE 7ME, CAP: 1200 GAL/DAY (h) Air regulator to be dismantled cleaned and boxed up and set pressure to be set at range 1-150 psi

1015, EQPT/SYSTEM: MARINE SANITATION DEVICE (STP), MAKE/MODEL: EXCELTEC OMNIPURE 7ME, CAP: 1200 GAL/DAY (j) Electrocatalytic cell to be dismantled and acid cleaned using 6%-10% solution of water and muriatic acid.

1015, EQPT/SYSTEM: MARINE SANITATION DEVICE (STP), MAKE/MODEL: EXCELTEC OMNIPURE 7ME, CAP: 1200 GAL/DAY (k) complete assembly and system pipe to be painted post work completion as per colour code.

1016, MISCELLANEOUS:

1016, MISCELLANEOUS: (a) Existing Split ACs to be renewed. Capacity- 2.0 ton each.

1016, MISCELLANEOUS: (b) Engine room work bench ( Platform area 1 mt sq, Materila MS sheet, thickness- 5 mm), work bench metal locker to be replaced

1016, MISCELLANEOUS: (c) Bench vice to be renewed and fitted.

1016, MISCELLANEOUS: (d) Engine room work bench Grinder's grinding wheels to be renewed and 02 spare grinding wheel is to be supplied.(dai- 200mm)

1016, MISCELLANEOUS: (e) Main Engine lub oil cooler to be removed, chemically cleaned and pressure tested upto 1.5 times working pressure. ,

1016, MISCELLANEOUS: (f) DG lub oil cooler to be removed , chemically cleaned and pressure tested upto 1.5 times working pressure.

1016, MISCELLANEOUS: (g) SRP lub oil cooler to be removed ,chemically cleaned and pressure tested upto 1.5 times working pressure.

1016, MISCELLANEOUS: (h) Main Engine Exhaust lines to be chemically cleaned, painted with heat resistant paint.approx dia 250 mm length 5 mtr

1016, MISCELLANEOUS: (j) DG Exhaust lines to be chemically cleaned, painted with heat resistant paint.approx dia 250 mm length 5 mtr

1017, EQPT:Submersible Pump, MAKE : Modi, Model- S541, Capacity- 40 TPH (a) Pump no operational. Submersible pump to be completely overhauled , including change of body

1017, EQPT:Submersible Pump, MAKE : Modi, Model- S541, Capacity- 40 TPH (b) Discharge side canvas hoses to be renewed (dia- 4 inch, length- 20 meter). Pump to be proved for satisfactory performance post work completion.

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM (a) Chemical cleaning and pressure testing of lub oil coolers to be carried out.

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM (b) Coolers to be boxed up with new zinc anodes. Anodes to be manufactured as per sample.

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM (c) Check the seals of the propeller shaft, seals of the steering tube and of the input shaft. Renew if required.

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM (d) Check the condition of the gears through the inspection hatches.

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM (e) Lub oil in sump to be completely drained and new oil charged SP 150. Oil will be provided by navy.

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM (f) Hydraulic oil to be drained and new oil charged SERVO System 46. Oil to be provided by firm

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM (g) Renew hydraulic oil filter elements

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM (h) Renew lub oil filter elements

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM (j)Renew all drive belts

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM (k) Replace the zinc anodes of Aqua Master Kort Nozzle

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM (l) Paint under water parts according to the surface treatment instructions.

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM (m) Carry out maintenance on all intermediate shaft bearing. Remove the used grease and fresh standard grease to be packed.

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM (n) Greasing of universal shaft joints to be carried out

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM (p) intermediate shaft bearings to be dismantled and old grease removed. Greasing of bearing to be carried out thereafter Grease type EP-2

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM (q) All flexible hoses/ durettes to be renewed .

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM (r) Lub Oil pressure switches to be renewed, Set pressure 17 bar (Part No A 7429733 )

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM Following instrumentation gauges and thermometers to be calibrated.

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM Following instrumentation gauges and thermometers to be calibrated. (i) Clutch oil pressure gauge. (0-40bar)

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM Following instrumentation gauges and thermometers to be calibrated. (ii)Luboil pressure gauge. (0-6bar)

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM Following instrumentation gauges and thermometers to be calibrated. (iii)Thermometers local reading

1018, EQPT/SYSTEM:SRP SYSTEM, MAKE : ROLLS ROYCE, Type- AQUAMASTER US1201/2500 , Manufacturing no-60552(Stbd),60551(Port) Following Docking Routines to be carried out by OEM Following instrumentation gauges and thermometers to be calibrated. SRP system to be painted post work completion as per colour code.

1019, BILGE PLATFORM (a) Engine Room and SRP compartment bilge platform to be removed, cleaned and fitback to facilate bilge area work.

1019, BILGE PLATFORM (b) Renew bilge platform plate. Material- aluminium chequred plates, thickness- 05 mm,

1019, BILGE PLATFORM (c) Bilge plates to be secured with bilge seucring screws, Material - SS

1019, BILGE PLATFORM (d) Bilge platform supporting brackets/frames to be renewed where ever required . Mat - MS

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (i) Remove all accessories from the engine

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (ii) Dismantle the engine completely.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (iii) Check th crank shaft for wear, scratches, dimentional limits. Regrind the crank shaft if needed.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (iv) Check bearing clearancesof auxialiary drives renew bearing if necessary, examine all gear teeth for pitting and scuffing.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (v) Check the cylinder block main bearing caps for correctness..

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (vi) Clean the cylinder block in totality.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (vii) Replace cam shaft thrust washer.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (viii) Replace all cam shaft bushings.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (ix) Reassemble crank shaft with new bearings.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (x) Check connecting rods for bend and twist.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (xi) Reassemble connecting rods with new liners, pistons, piston rings and connecting rod bearings.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (xii) Overhaul governor, Renew worn parts, Calibrate governor on completion of overhaul.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (xiii) Replace plate type lub oil cooler. ( check )

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (xiv) Remove and chemically clean lub oil and fresh water cooler, carry out pressure test, replace gaskets and O rings.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (xv) Replace all bushings fitted in the engine.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (xvi) Overhaul the cylinder heads.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (xvii) Overhaul all Rocker levers and cam follower levers..

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (xviii) Overhaul / Replace the turbo charge based on their condition.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (xix) Replace the vibration dampers.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (xx) Check after coolers for leakage, clean / replace the same.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (xxi) Replace the AVM pads.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (xxii) Post complete reassembling of engine, start the engine, arrest leakages if any, carry out load trails including governor trials in presence of the trial authority.

1020, MAIN ENGINE, Make: Kirloskar Cummins, Model: KTA 3067M, Rating / Capacity: 1250BHP@1800 RPM, Port M/E Running hrs since commissioning: 21979 hrs ( Till 31 Dec 19), Running hrs since last routines: 2038 hrs, (13 months) Last routine undertaken/Date: 12000 hrly SR-18, Stbd M/E Running hours since commissioning: 21986 hrs ( Till 31 Dec 19), Running hrs since last routines: 2043 hrs, (13 months) Last routine undertaken/Date: 6000 hrly SR-18 Folllowing 24000 hrly Routines is to be carried out on both Main Engines, mandatory spares for the same be obtained from the OEM .All below routines to be considered for 02 engines. (xxiii) Mandatory Spares list required for above (24K) routines of to be obtained from OEM and all spares to presented for qc inspection.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT)

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (i) Remove all cylinder heads and dismantle valve gear. Decarbonise combustion spaces. Carry out overhauling

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (ii) Clean and calibrate injectors and record test pressure in service log.Also change injector inlet screen.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (iii) Replace rocker cover gaskets.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (iv) Adjust valve tapped clearances within limits and record in service log.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (v) Replace fuel pump filter (Screen and magnet).

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (vi) Calibrate PT fuel pump and record in sevice log.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (vii) Carry out overhauling of TC.Clean turbocharger compressor wheel and diffuser.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (viii) Check turbocharger radial/end bearing clearance insite Renew/O ring Teflon gasket when turbocharger is opened for checking clearances.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (ix) Torque manifold nuts or caps screws as per specifications.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (x) Drain coolant Flush through using rediwash as alid down in operating manual.Renewed coolant

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (xi) Overhaul S/W pump and F/W pumps

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (xii) Inspect idler and drive gears.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (xiii) Checking thickness of vibration damper at 0,90,180 & 270 degrees positions.Replace damper if vibration of 4 readings exceeds 0.010 and (0.25mm) or exceeds maximum allowance thickness.Check to be undertaken in coupled condition.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (xiv) Check crank end clearance with a dial indicator attaching against damper main 0.13mm Max o.5mm.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (xv) Undertake alignment checks between the shaft and engine restore radial/axial limits.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (xvi) Remove and chemically clean lub oil and fresh water cooler and carryout pressure testing.Renew gasket and 'O' seal.Repair/renew expansion tank

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (xvii) Droop setting and load trails.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (xviii)Aft DG , oil leking from Vibration damper seal . Defect to be rectified

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (xix)Engine driven Sea W pump non ops. To be renewd

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (xx)Belt driven SW pump non ops. To be renewd

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (xxi) Safety Guard of SW and FW pump drive deterioarted. To be renewed. Mat- MS, Area to be protected 2 mt sq, Width - 100 mm,DA to be painted with heat resistant paint.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (a) 6000 hourly routine is to be carried out including following jobs (DG AFT) (xxii)Spares for routine placed atDL 1021(a)

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (i) Remove all cylinder heads and dismentle valve gear. Decarbonise combustion spaces. Grind in valves

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (ii) Clean and calibrate injectors and record test pressure in service log.Also change injector inlet screen

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (iii) Replace rocker cover gaskets.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (iv) Adjust valve tapped clearances within limits and record in service log.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (v) Replace fuel pump filter (Screen and magnet).

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (vi) Calibrate PT fuel pump and record in sevice log.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (vii) Carry out overhauling of tc.Clean turbocharger compressor wheel and diffuser.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (viii) Check turbocharger radial/end bearing clearance insite Renew/O ring Teflon gasket when turbocharger is opened for checking clearances.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (ix) Torque manifold nuts or caps screws as per specifications.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (x) Drain coolant Flush through using rediwash as alid down in operating manual.Renewed coolant

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xi) Check S/W pump and F/W pumps for performance/defects and overhaul if required.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xii) Inspect idler and drive gears.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xiii) Checking thickness of vibration damper at 0,90,180 & 270 degrees positions.Replace damper if vibration of 4 readings exceeds 0.010 and (0.25mm) or exceeds maximum allowance thickness.Check to be undertaken in coupled condition.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xiv) Check crank end clearance with a dial indicator attaching against damper main 0.13mm Max o.5mm

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xv) Undertake alignment checks between the shaft and engine restore radial/axial limits.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xvi) Remove and chemically clean lub oil and fresh water cooler and carryout pressure testing.Renew gasket and 'O' seal.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xvii) Guaging and inspection one liner from each bank for corrosion putting post.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xviii) Extraction of connecting and big end bearing clearances and examination of big and shell for the cylinder opened.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xix) Check condition of valve gear bracket sleeves sealing and injector tube inspection of valve gear parts and valve seat insert at the cylinder head opened

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xx) Examine crank pin surface and check for ovality and wear.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xxi) Examine piston for wear and guage piston ring clearance. Renew rings if necessary.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xxii) Examine lub oil pump drive for wear.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xxiii) Inspect holset/valcan/centamax flexible coupling and torque tighten inner/outer members check rubber block side for deterioration, Renew if necessary.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xxiv) Renew rubber vibration damper where fitted.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xxv) Overhaul governor, renew worn out parts calibrate governor after completionof overhauling.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xxvi) Droop setting and load trails.

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xxvii)Engine driven FW pump non ops. To be renewd

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xxviii)Belt driven SW pump non ops. To be renewwd

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xxix) Safety Guard of SW and FW pump drive deterioarted. To be renewed. Mat- MS, Area to be protected 2 mt sq, Width - 100 mm,DA to be painted with heat resistant paint

1021, EQPT : DIESEL GENERATOR, Make: CUMMINS, Model- NT495MG DG FWD(Port) Running hrs since Installation : 14114 hrs Last routine carried out - 6000hrly / SR-18 Running hrs since last routine- 1146 hrs, (13 months) DG AFT (Stbd) Running hrs since Installation : 12377 hrs Last routine carried out - 12000 hrly / SR-18 Running hrs since last routine- 1131 hrs (13 months) . (b) 12000 hourly routine is to be carried out including following jobs (DG FWD) Spares and services are in scope of DL, and sapre list to be approved by OEM/OEM authorised rep, and copy of same may be submitted when required. (xxx) Spares for routine at DL 1021(b)

1022, Post completion of refit, entire bilge space of Engine Room, ASP to be cleaned and dried, painted as part of final handing over of the vessel.

1023, 1 Hp portable pump with motor defective to be replaced (Make - Crompton Greaves)

1024 EQPT: HAND PUMPS (E/R Bilge,FO,LO,FW,Forward Bilge) ( All pumps are Hard to Operate) MAKE: M/S Bhargav (a) Dismantle and Clean pumps internally, renew wear down parts if required.

1024 EQPT: HAND PUMPS (E/R Bilge,FO,LO,FW,Forward Bilge) ( All pumps are Hard to Operate) MAKE: M/S Bhargav (b) Pump Suction cocks to be renewed, size 25 mm

1024 EQPT: HAND PUMPS (E/R Bilge,FO,LO,FW,Forward Bilge) ( All pumps are Hard to Operate) MAKE: M/S Bhargav (c) Pump Suction lines to be renewed. Mat MS, Size 25mm,

1024 EQPT: HAND PUMPS (E/R Bilge,FO,LO,FW,Forward Bilge) ( All pumps are Hard to Operate) MAKE: M/S Bhargav (d) Renew Wooden handles of pumps. ( as per existing sample)

1024 EQPT: HAND PUMPS (E/R Bilge,FO,LO,FW,Forward Bilge) ( All pumps are Hard to Operate) MAKE: M/S Bhargav (e) Pump to be boxed back and proved for satisfactory performance.

1025 Alfa laval fuel centrifuge Model- Alfa laval MAB 103

1025 Alfa laval fuel centrifuge Model- Alfa laval MAB 103 Overhaul Fuel centrifuge and prove for satisfactory performance.Overhaul to include renewal of main shaft bearings,gaskets,check friction pad,gear pump overhaul,balancing of bowl,cleaing of bowl and conical plates, renewal of gauges.

ELECTRICAL WORK PACKAGE All electrical power components / spares like contactors, overload relays, etc are to to be sourced from Navy approved vendors. IMPORTANT NOTE:- Following points are applicable for all relevant DL's and shipyards/Firms to consider and quote accordingly. (a) Renewal of Items / Spares:- (i) Renewal of items / spares wherever mentioned in the QDL to be undertaken by shipyard / firm as per the sample / drawing / details provided by SS / COA / RMT. (ii) Shipyard / Firm should undertake the routines / overhaul of the equipment including the mandatory spares required for undertaking the same, irrespective of the spares mentioned in the mandatory spares list provided by ND(V). (iii) Further, the cost should include the degutting of existing item, supply of new item, fitment and proving of the system post renewal.

The definition of overhaul of motor includes the following:- (a) Dismantle the motor. The motor has to be dismantled and landed by Yard for overhauling. (b) Undertake trueness checks of rotor on the lathe. Repair observed Defects (c) Check for ovality in bearing housing. Repair observed Defects. (d) Clean the rotor and stator thoroughly with alcohol, air, varnish and bake. There should be no dust particles or other foreign particles observed after cleaning (e) Measure the insulation of windings of rotor and stator. In case insulation is below one mega ohm rewind the rotor / stator (f) Replace heater and thermistor units. (g) Assemble the motor with new bearings (h) In case of repairs to shaft trueness or replaced of winding,undertake dynamic balancing of the rotor (j) Check and rectify phase imbalance in insulation of windings (k) Undertake test bed Trials and confirm no load starting and running currents, speed, SPM readings apart from other standard checks. SPM reading are to be in green zone post overhaul. (l) All motors and machinery body/ cabinets to be painted as per the original colur. (m) Brass Marking talleys to be provided for all equipment( 8x2 cms)- Qty 1500 nos apprx total. (n) Wiring/ cabling which are removed during gutting/ degutting to be re wired whereever applicable. (p) All motors with monoblock pumps are to be proved in situ. (q) All terminal boxes rubber beading to be replaced to achieve water tight integrity.

Following 'As Fitted' drawings need to be prepared and handed over to ships staff (a) Foundations of new equipment (b) Electrical cabling (c) All As and A's including internals of control panel (Hull, Engineering & Electrical). (d) ABER replacement (Hull, Engineering & Electrical ).

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd.

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (a) MSB to be overhauled (includes defective switches to be renwed, perished control wiring to be renewed with crimping of proper lugs, marking sleeves to be put on control wiring and loose wirng to be tied with cable ties)

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (b) Carryout routines mentioned below and prove them for satisfactory performance (calibration certificates/test reports from NABL recognised Labs are to be submitted) Note:-Switch Board body to be Cleaned to bare metal and painted with one coat of primer and one coat of enamel white color paint from inside and gray color paint from outside.

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (b) Carryout routines mentioned below and prove them for satisfactory performance (calibration certificates/test reports from NABL recognised Labs are to be submitted) Note:-Switch Board body to be Cleaned to bare metal and painted with one coat of primer and one coat of enamel white color paint from inside and gray color paint from outside. (b1)Renewal of MCCBs,40A Triple pole Make Schneider

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (b) Carryout routines mentioned below and prove them for satisfactory performance (calibration certificates/test reports from NABL recognised Labs are to be submitted) Note:-Switch Board body to be Cleaned to bare metal and painted with one coat of primer and one coat of enamel white color paint from inside and gray color paint from outside. (b2)Renewal of MCCBs,32A Triple pole Make Schneider

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. ( c) Calibration of MCBs,make Schneider as per follows

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. ( c) Calibration of MCBs,make Schneider as per follows (c1) MCBs 40A Triple pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. ( c) Calibration of MCBs,make Schneider as per follows (c2) MCBs 32A Triple pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. ( c) Calibration of MCBs,make Schneider as per follows (c3) MCBs 25A Triple pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. ( c) Calibration of MCBs,make Schneider as per follows (c4) MCBs 20A Triple pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. ( c) Calibration of MCBs,make Schneider as per follows (c5) MCBs 16A Triple pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. ( c) Calibration of MCBs,make Schneider as per follows (c6) MCBs 10A Triple pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. ( c) Calibration of MCBs,make Schneider as per follows (c7) MCBs 6A Triple pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. ( c) Calibration of MCBs,make Schneider as per follows (c8) MCBs 3A Triple pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. ( c) Calibration of MCBs,make Schneider as per follows (c9) MCBs 2A Triple pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. ( c) Calibration of MCBs,make Schneider as per follows (c10) MCBs 6A Double pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (d)renewal of MCBs as per following list ,Make Schneider

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (d)renewal of MCBs as per following list ,Make Schneider (d1) MCBs 40A Triple pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (d)renewal of MCBs as per following list ,Make Schneider (d2) MCBs 32A Triple pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (d)renewal of MCBs as per following list ,Make Schneider (d3) MCBs 25A Triple pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (d)renewal of MCBs as per following list ,Make Schneider (d4) MCBs 20A Triple pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (d)renewal of MCBs as per following list ,Make Schneider (d5) MCBs 16A Triple pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (d)renewal of MCBs as per following list ,Make Schneider (d6) MCBs 10A Triple pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (d)renewal of MCBs as per following list ,Make Schneider (d7) MCBs 6A Triple pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (d)renewal of MCBs as per following list ,Make Schneider (d8) MCBs 3A Triple pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (d)renewal of MCBs as per following list ,Make Schneider (d9) MCBs 2A Triple pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (d)renewal of MCBs as per following list ,Make Schneider (d10) MCBs 6A Double pole

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. ( e) Calibrate the hand operated plug in type MCCB along with all its accessories. Rated:-415v,50 Hz,3phase, 100Amps. Make: Merlin Gerin Model-NS100N 30770

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (f) Switch Board Power Contactor non ops. Renewal of Power Contactor, Make-Telemachanique model LC1-D9511 415 v, 3Phase, 50 hz,110A with operating coil 230v 1ph, WITH 2NO+2NC auxiliary contacts

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (g) Motor operated plug in type MCCB non ops. Renew Motor operated plug in type MCCB along with all its accessories. Rated:-415v,50 Hz,3phase, 160Amps. Make: Merlin Gerin Model-NS160N 30770

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (h) Check & Calibrate all the parameters of Reverse Power Relays. & Rectify/Repair/Adjust if any un sat perameter is found. Make:Selco, Model:T2000

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (j) Renewal of Reverse Power Relays. Make:Selco, Model:T2000

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (j) Renewal of Reverse Power Relays. Make:Selco, Model:T2000 (j-1) Operating parameters of Revers Power Relay a) Voltage Tolarance :-50+10% b) Power Consumption :Voltage 5VA Un & Current 0.3VA at In c) Frequency Range :45 - 65Hz d) Operating Temperature Range :-20+70ºC e) Contact rating :AC 2A,380V,250VA & DC 35V,8A, 150W f) Dielectric test :2500V,50Hz g) Repeatabilty :±1% h) Overall Accuracy signal :± 5% i) Preset Level 8% k) Delay time 2-20sec

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (k) Check & Calibrate all parameters of Insulation Monitoring Relay. & Rectify/Repair/Adjust if any un sat perameter is found. Make:Selco, Model:T3200 renew if defective

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (m) Renew of Insulating monitoring Relays. Make:Selco, Model:T2000

2001 (m1) Operating parameters of Insulating monitoring Relay a) Voltage Tolarance :+10-20% of Un b) Power Consumption :2VA max c) Frequency Range :45 - 65Hz d) Operating Temperature Range :-20+70ºC e) Contact rating :AC 2A,380V,250VA & DC110V,2A, 150W f) Dielectric test :2500V,50Hz g) Presetting 0-5M Ohm h) Accuracy signal :± 5%(of preset valve) i) Instrument scale 0-5 M ohm k) Instrument Resistance Max 100 Ohm

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (n) Check & Calibrate all parameters of Paralleling Relay. & Rectify/Repair/Adjust if any un sat parameter is found. Make:Selco, Model:T5000.

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (p) Renewal of Paralleling Relay. Make:Selco, Model:T5000.

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (q) Operating parameters of Paralleling Relay a) Voltage Tolarance:-30+10%: b) Power Consumption :2 X 5VA max ; c) Frequency Range:45 - 65Hz; d) Operating Temperature Range :-20+70ºC; e) Contact rating :AC 8A,380V,2000VA & DC 150W; f) Dielectric test:2500V,50Hz; g) Time for Closing signal <50 msec; h) Phase difference for cloasing signal :<± 6ºC

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (r ) Calibrate the following Meters (calibration certificate to be submitted and attached in the respective unit)

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (r ) Calibrate the following Meters (calibration certificate to be submitted and attached in the respective unit) (r1) 0-500V Volt meter with red mark at 415V Make:Autromatic Electric ltd

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (r ) Calibrate the following Meters (calibration certificate to be submitted and attached in the respective unit) (r2) 0-500V Double scale Volt meter with red mark at 415V Make:Autromatic Electric ltd

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (r ) Calibrate the following Meters (calibration certificate to be submitted and attached in the respective unit) (r3) 0-300V Volt meter with red mark at 230V Make:Autromatic Electric ltd

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (r ) Calibrate the following Meters (calibration certificate to be submitted and attached in the respective unit) (r4) 0-100A Ammeter with red mark at -A, CTR 100/5A Make:Autromatic Electric ltd

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (r ) Calibrate the following Meters (calibration certificate to be submitted and attached in the respective unit) (r5) 0-50A Ammeter with red mark at --A,CTR 50/5A Make:Autromatic Electric ltd-

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (r ) Calibrate the following Meters (calibration certificate to be submitted and attached in the respective unit) (r6) Frequency Meters 45-50-55Hz rated 415V and red mark at 50Hz Make:Autromatic Electric ltd

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (r ) Calibrate the following Meters (calibration certificate to be submitted and attached in the respective unit) (r7) Frequency Meters (double scale)45-50-55Hz rated 415V and red mark at 50Hz Make:Autromatic Electric ltd

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (r ) Calibrate the following Meters (calibration certificate to be submitted and attached in the respective unit) (r8) Synchronous Meter 110V Make:Automatic Electric ltd

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (r ) Calibrate the following Meters (calibration certificate to be submitted and attached in the respective unit) (r9) Kilo Watt Meters -15-0-150KW red mark at 80Kw - Make:Autromatic Electric ltd

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (s) Rubber mat : Insulating Rubber Mat deteriorated. To be Renewed with high voltage Electrical rubber mat in front of MSB.(Thickness- 3mm) Make vardhaman model class c

2001 Eqpt/System: MAIN SWITCH BOARD Make:Marine Electricals, Location:Engine Room 01 no Switch board with commen bus bar system with three incomeing feedrs from two DAs. & shore supply And these three are electrically interlocked & connected to the commen bus bar in swbd. (t) Paintng : Machinery body to be Cleaned to bare metal and painted with one coat of primer and one coat of enamel paint (white color paint from inside and gray color paint from outside).

2002 Eqpt/System: Transformer Fuse Link Box . Make;Marine electricals 415V,3ph,50Hz/230V,3ph,50Hz

2002 Eqpt/System: Transformer Fuse Link Box . Make;Marine electricals 415V,3ph,50Hz/230V,3ph,50Hz (a) Carryout overhaul routines and proove them for satisfactory performance / made operational

2002 Eqpt/System: Transformer Fuse Link Box . Make;Marine electricals 415V,3ph,50Hz/230V,3ph,50Hz (b) Machinery body to be Cleaned to bare metal and painted with one coat of primer and one coat of enamel paint (white color paint from inside and gray color paint from outside).

2002 Eqpt/System: Transformer Fuse Link Box . Make;Marine electricals 415V,3ph,50Hz/230V,3ph,50Hz (c ) Renew the internal wiring of Transformer (in between the connectors to fuse units)

2003 Eqpt/System: Wind Wiper Systems Make Lucas TVS; Size:Stroke 500mm,Blade 600mm, Motor data- Make:Suntrans enterprise DC 24V;0.1HP;3500RPM;

2003 Eqpt/System: Wind Wiper Systems Make Lucas TVS; Size:Stroke 500mm,Blade 600mm, Motor data- Make:Suntrans enterprise DC 24V;0.1HP;3500RPM; (a) Overhaul the gear system along with motor and prove them for free movement / satisfactory performance

2003 Eqpt/System: Wind Wiper Systems Make Lucas TVS; Size:Stroke 500mm,Blade 600mm, Motor data- Make:Suntrans enterprise DC 24V;0.1HP;3500RPM; (b) Renew the Blades Including Rubber coambing

2003 Eqpt/System: Wind Wiper Systems Make Lucas TVS; Size:Stroke 500mm,Blade 600mm, Motor data- Make:Suntrans enterprise DC 24V;0.1HP;3500RPM; (c) Overhaul the motors and prove them for satisfactory performance 24V,DC,250W

2003 Eqpt/System: Wind Wiper Systems Make Lucas TVS; Size:Stroke 500mm,Blade 600mm, Motor data- Make:Suntrans enterprise DC 24V;0.1HP;3500RPM; (d ) Machinery body to be Cleaned to bare metal and painted with one coat of primer and one coat of enamel paint (white color paint from inside and gray color paint from outside).

2004 Eqpt/System: Navigational Lighting Panels(AC & DC) Make:Edna 230V for AC,24V for DC

2004 Eqpt/System: Navigational Lighting Panels(AC & DC) Make:Edna 230V for AC,24V for DC (a) Carryout complete overhauling routines of N.L.Panels. (AC & DC) and prove them for satisfactory performance

2004 Eqpt/System: Navigational Lighting Panels(AC & DC) Make:Edna 230V for AC,24V for DC (b) Renewal of N.L.panels.(AC & DC)

2004 Eqpt/System: Navigational Lighting Panels(AC & DC) Make:Edna 230V for AC,24V for DC ( c ) Check the control cards functions (Rectify / Repair if any deffective) and prove for satisfactory performance

2004 Eqpt/System: Navigational Lighting Panels(AC & DC) Make:Edna 230V for AC,24V for DC (d) Renewal of fault detection modules.

2004 Eqpt/System: Navigational Lighting Panels(AC & DC) Make:Edna 230V for AC,24V for DC (e ) Renew the LED indication lamps with holders

2004 Eqpt/System: Navigational Lighting Panels(AC & DC) Make:Edna 230V for AC,24V for DC (f) Renew the Fuse Units in clip on type connectors

2004 Eqpt/System: Navigational Lighting Panels(AC & DC) Make:Edna 230V for AC,24V for DC (g) Check the circuits (Cables) in between the control panel & Navigational light fitting if there is any fault rectify them

2004 Eqpt/System: Navigational Lighting Panels(AC & DC) Make:Edna 230V for AC,24V for DC (h) Renew the cables ( single core cable, 2 mm sq) (incoming & outgoing)

2005 Eqpt/System: Light fittings.

2005 Eqpt/System: Light fittings. (a) Overhaul the navigational light fittings along with their junction boxes

2005 Eqpt/System: Light fittings. (b) Renewal of Cable for incoming supply to navigational light fittings 2core,1sq.mm, from jbs at mast pole to light fitting-10Nos fittings

2005 Eqpt/System: Light fittings. (c ) Renew the AC navigational bulbs 230V,60w

2005 Eqpt/System: Light fittings. (d) Renew the DC navigational bulbs 24V,60w

2005 Eqpt/System: Light fittings. (e ) Renew 24V DC Emergency LED lights along with fittings. (operating voltage range 15V to 30V DC)(BC holder type bulbs).

2005 Eqpt/System: Light fittings. (f) Renew Watertight U Glass light fittings along with 230V,22W LED bulb, Make- Sysca

2005 Eqpt/System: Light fittings. (g) Renew the 230V,12W LED bulbs, Make- Sysca/philips/bajaj in WT bulk head lamp fittings.

2005 Eqpt/System: Light fittings. (h) Renew 230V, 20W,LED lights, Make- Sysca

2005 Eqpt/System: Light fittings. (j) Overhauling of Watertight sarchlight fittings overhauling to include renewal of rubber gaskets, movement mechanism and bulbs. (Spec 30cm Dia with 1000W lamp with w/h cat no 351A.)

2005 Eqpt/System: Light fittings. (k) Renew LED Flood Light Fitting (WT) 120W,230V,AC; Make:Sysca/philips/Avani

2005 Eqpt/System: Light fittings. (m) Renew LED Flood Light Fitting (WT) in E/R 100W,230V,AC; Make Sysca/philips/avani/philips

2005 Eqpt/System: Light fittings. (m) Renew LED Flood Light Fitting (WT) in E/R 100W,230V,AC; Make Sysca/philips/avani/philips (m1)The job includes welding of brackets for fittment, installation,cabling,and connections of lights to switches.

2005 Eqpt/System: Light fittings. (m) Renew LED Flood Light Fitting (WT) in E/R 100W,230V,AC; Make Sysca/philips/avani/philips (m2) Renewal of cable 2X2.5sq.mm copper multi stand marine cable.for LED flood lamps.

2005 Eqpt/System: Light fittings. (m) Renew LED Flood Light Fitting (WT) in E/R 100W,230V,AC; Make Sysca/philips/avani/philips (m3) Provide WT rotary type switches for control of 6 in nos flood lamps in E/R.(Each switch is control the 2 in nos LED fittings)

2006 Eqpt/System:DG AV control panel

2006 Eqpt/System:DG AV control panel (a) D/G (port & stbd) AV Alaram panel System including control wiring to be completely over hauled,checked circuitry functions, and proved for satisfactory operation.Machinery body to be Cleaned to bare metal and painted with one coat of primer and one coat of enamel paint (white color paint from inside and gray color paint from outside).

2006 Eqpt/System:DG AV control panel (b) Calibration of the following cutouts of DA.(Make:kirloskaor, Model:NT495)

2006 Eqpt/System:DG AV control panel (b) Calibration of the following cutouts of DA.(Make:kirloskaor, Model:NT495) (b1) Calibrate Fresh Water temperature cut outs for Alarm Set point 92ºC and tripping at Set point 97ºC

2006 Eqpt/System:DG AV control panel (b) Calibration of the following cutouts of DA.(Make:kirloskaor, Model:NT495) (b2) Calibrate Lub oil temp cutout for alarm set point 97ºC and trip at 105°C.

2006 Eqpt/System:DG AV control panel (b) Calibration of the following cutouts of DA.(Make:kirloskaor, Model:NT495) (b3)Calibrate Lub oil Pressure cut out for Alaram Set point 1.5 kg/sq cm and Tripping Set point 0.5 kg/sq cm

2006 Eqpt/System:DG AV control panel (b) Calibration of the following cutouts of DA.(Make:kirloskaor, Model:NT495) (b4) CALIBRATE Over Speed Cut out for tripping Set point 1650RPM

2006 Eqpt/System:DG AV control panel (b) Calibration of the following cutouts of DA.(Make:kirloskaor, Model:NT495) (b5) Calibrate Over temperature of Alternator for tripping Set point 70ºC

2006 Eqpt/System:DG AV control panel (c ) Renewal of alarm indicators and push buttons in wheel house as per follows

2006 Eqpt/System:DG AV control panel (c ) Renewal of alarm indicators and push buttons in wheel house as per follows (c1) Overspeed indicator

2006 Eqpt/System:DG AV control panel (c ) Renewal of alarm indicators and push buttons in wheel house as per follows (c2) Low lube oil pressure indicator

2006 Eqpt/System:DG AV control panel (c ) Renewal of alarm indicators and push buttons in wheel house as per follows (c3) Fresh water high temperature indicator

2006 Eqpt/System:DG AV control panel (c ) Renewal of alarm indicators and push buttons in wheel house as per follows (c4) Acknowledge push button

2006 Eqpt/System:DG AV control panel (c ) Renewal of alarm indicators and push buttons in wheel house as per follows (c5) Test push button

2006 Eqpt/System:DG AV control panel (c ) Renewal of alarm indicators and push buttons in wheel house as per follows (c6) Start push button

2006 Eqpt/System:DG AV control panel (c ) Renewal of alarm indicators and push buttons in wheel house as per follows (c7) Stop push button

2006 Eqpt/System:DG AV control panel (c ) Renewal of alarm indicators and push buttons in wheel house as per follows (c9) Accept push button

2006 Eqpt/System:DG AV control panel (c ) Renewal of alarm indicators and push buttons in wheel house as per follows (c10) Reset push button

2006 Eqpt/System:DG AV control panel (c ) Renewal of alarm indicators and push buttons in wheel house as per follows (c11) Silence push button

2006 Eqpt/System:DG AV control panel (d) Calibrate the following sensors

2006 Eqpt/System:DG AV control panel (d) Calibrate the following sensors (d1) Temperatur sensors ( 0 to 200)

2006 Eqpt/System:DG AV control panel (d) Calibrate the following sensors (d2) Pressure Sensors ( 0 to 10)

2006 Eqpt/System:DG AV control panel (e ) Check & Calibrate the following units

2006 Eqpt/System:DG AV control panel (e ) Check & Calibrate the following units (e1) Contactors relays 24V DC

2006 Eqpt/System:DG AV control panel (e ) Check & Calibrate the following units (e2) Flasher Light 24V,DC

2006 Eqpt/System:DG AV control panel (e ) Check & Calibrate the following units (e3) Alarm 24V,DC

2006 Eqpt/System:DG AV control panel (e ) Check & Calibrate the following units (e4) Calibrate the flash & alram pcb circuit board

2006 Eqpt/System:DG AV control panel (f) Renewal the following items

2006 Eqpt/System:DG AV control panel (f) Renewal the following items (f1) Temperature sensors ( 0 to 200) DANFOSS TEMPERATURE SENSOR

2006 Eqpt/System:DG AV control panel (f) Renewal the following items (f2) Pressure Sensors ( 0 to 10)-DANFOSS PRESSURE TRANSMITTER

2006 Eqpt/System:DG AV control panel (f) Renewal the following items (f3) flash & alaram pcb circuit board

2006 Eqpt/System:DG AV control panel (f) Renewal the following items (f4) Contactors relays 24V DC

2006 Eqpt/System:DG AV control panel (f) Renewal the following items (f5) Flasher Light 24V,DC

2006 Eqpt/System:DG AV control panel (f) Renewal the following items (f6) Alarm 24V,DC

2007 Eqpt/System:External Fire Fighting System (including control panel) (fire guns -2 Nos & control panel-1 no) Make:Counter Fire Limited Type:MONITOR,3.0" SUPER LOW-PRO;, Motors-4Nos, Limit switches-8Nos

2007 Eqpt/System:External Fire Fighting System (including control panel) (fire guns -2 Nos & control panel-1 no) Make:Counter Fire Limited Type:MONITOR,3.0" SUPER LOW-PRO;, Motors-4Nos, Limit switches-8Nos (a) Carryout overhaul routines of control panel and proove for satisfactory performance/made operational (it incudes calibration of OLRs-4nos,meters-4nos & etc)

2007 Eqpt/System:External Fire Fighting System (including control panel) (fire guns -2 Nos & control panel-1 no) Make:Counter Fire Limited Type:MONITOR,3.0" SUPER LOW-PRO;, Motors-4Nos, Limit switches-8Nos (b) Overhauling of guns motors (0.12KW,415v, 3 ph, 50 hz, RPM-1380,MODEL- ROTOR NL) along with gear system,limit switches & mechanical units .

2007 Eqpt/System:External Fire Fighting System (including control panel) (fire guns -2 Nos & control panel-1 no) Make:Counter Fire Limited Type:MONITOR,3.0" SUPER LOW-PRO;, Motors-4Nos, Limit switches-8Nos (c) Renewal of Fire monitor/guns motors (0.5HP,415v, 3 ph, 50 hz) along with manually operating handle

2007 Eqpt/System:External Fire Fighting System (including control panel) (fire guns -2 Nos & control panel-1 no) Make:Counter Fire Limited Type:MONITOR,3.0" SUPER LOW-PRO;, Motors-4Nos, Limit switches-8Nos (d) Renewal of Limit switches

2007 Eqpt/System:External Fire Fighting System (including control panel) (fire guns -2 Nos & control panel-1 no) Make:Counter Fire Limited Type:MONITOR,3.0" SUPER LOW-PRO;, Motors-4Nos, Limit switches-8Nos (e) Renewal of OLRs

2007 Eqpt/System:External Fire Fighting System (including control panel) (fire guns -2 Nos & control panel-1 no) Make:Counter Fire Limited Type:MONITOR,3.0" SUPER LOW-PRO;, Motors-4Nos, Limit switches-8Nos (f) Provide the rain shade covers for fire gun motors

2007 Eqpt/System:External Fire Fighting System (including control panel) (fire guns -2 Nos & control panel-1 no) Make:Counter Fire Limited Type:MONITOR,3.0" SUPER LOW-PRO;, Motors-4Nos, Limit switches-8Nos (g) Renewal of Ammeters Range:0 to 10A,size: 49X49mm,Make:AE.

2008 Eqpt/System: Equipment power supply cable and Lighting circuits & cable trays.

2008 Eqpt/System: Equipment power supply cable and Lighting circuits & cable trays. ( a) Renewal of cables of below and prove them for satisfactory performance.for the following circuits (cable size 1X2.5sq.mm copper multi stand marine cable.

2008 Eqpt/System: Equipment power supply cable and Lighting circuits & cable trays. ( a) Renewal of cables of below and prove them for satisfactory performance.for the following circuits (cable size 1X2.5sq.mm copper multi stand marine cable. (a1) Engine Room lighting DB to all tube lights Via junction boxes in engine room

2008 Eqpt/System: Equipment power supply cable and Lighting circuits & cable trays. ( a) Renewal of cables of below and prove them for satisfactory performance.for the following circuits (cable size 1X2.5sq.mm copper multi stand marine cable. (a2) Engine Room lighting DB to accomodation tube lights

2008 Eqpt/System: Equipment power supply cable and Lighting circuits & cable trays. ( a) Renewal of cables of below and prove them for satisfactory performance.for the following circuits (cable size 1X2.5sq.mm copper multi stand marine cable. (a3) Alleyway LDB to Master cabin & Drivers cabin circuits

2008 Eqpt/System: Equipment power supply cable and Lighting circuits & cable trays. ( a) Renewal of cables of below and prove them for satisfactory performance.for the following circuits (cable size 1X2.5sq.mm copper multi stand marine cable. (a4) Alleyway PDB to Master cabin & Drivers cabin circuits

2008 Eqpt/System: Equipment power supply cable and Lighting circuits & cable trays. ( a) Renewal of cables of below and prove them for satisfactory performance.for the following circuits (cable size 1X2.5sq.mm copper multi stand marine cable. (a5) 24v DC supply circuits for emergency lights & etc

2008 Eqpt/System: Equipment power supply cable and Lighting circuits & cable trays. (b) Renewal of cabling (multi stand copper 3 core 6 sr.mm marine cable) to be carried out from MSB to starters for Blowers/pump motor and between starter and blowers at various locations. Post wiring the system to be made operational.

2008 Eqpt/System: Equipment power supply cable and Lighting circuits & cable trays. (c ) Provide the Cable & laying of cable for DC supply from W/H DC DB to change over switch in SRP compartment, cable size 1x10 sqmm copper multi stranded cble with proer rating lugs on both ends

2009 Eqpt/System: CO2 Existinguishing system. Make:New Fire Engineers pvt ltd Mumbai

2009 Eqpt/System: CO2 Existinguishing system. Make:New Fire Engineers pvt ltd Mumbai (a) Carryout routines of alaram system. Renew wiring,Repair PCBs as per mentioned below .Carryout complete overhaul of the alarm system and prove system for satisfactory operations

2009 Eqpt/System: CO2 Existinguishing system. Make:New Fire Engineers pvt ltd Mumbai (b) Overhaul the Motorised Siren & Flasher Make:KHERAJ Type-Horozontal Single Mounting,24V,DC,75W 6000RPM,Range 800mtrs

2009 Eqpt/System: CO2 Existinguishing system. Make:New Fire Engineers pvt ltd Mumbai (c ) Check and calibrate all heat detectors and set to 58°C -( Type Nittan uk ns-DhG1)

2009 Eqpt/System: CO2 Existinguishing system. Make:New Fire Engineers pvt ltd Mumbai (d) Check ,calibrate & set to their set point of Pressure operated switch-1no Make:Ginger Kerr Working pressure 3-150bar

2009 Eqpt/System: CO2 Existinguishing system. Make:New Fire Engineers pvt ltd Mumbai (e ) Machinery body to be Cleaned to bare metal and painted with one coat of primer and one coat of enamel paint (white color paint from inside and gray color paint from outside).

2009 Eqpt/System: CO2 Existinguishing system. Make:New Fire Engineers pvt ltd Mumbai (f) Renew the indication lamps with holders (2.5 cm dia cover)

2009 Eqpt/System: CO2 Existinguishing system. Make:New Fire Engineers pvt ltd Mumbai (g) Renew the all rubber packings

2009 Eqpt/System: CO2 Existinguishing system. Make:New Fire Engineers pvt ltd Mumbai (h) check and calibrate the pcb cards in caontrol panel.

2010 Eqpt/System: Shore Supply Box. Make:Marine Electrical,100amps,415V,3ph

2010 Eqpt/System: Shore Supply Box. Make:Marine Electrical,100amps,415V,3ph (a) Carryout complete overhaul and proove them for satisfactory performance.

2010 Eqpt/System: Shore Supply Box. Make:Marine Electrical,100amps,415V,3ph (b) Renew the indication lamps with holders-3Nos

2010 Eqpt/System: Shore Supply Box. Make:Marine Electrical,100amps,415V,3ph (c ) Renewal of MCCB-100amps, hand operated, Make: Merlin Gerin

2010 Eqpt/System: Shore Supply Box. Make:Marine Electrical,100amps,415V,3ph (d) Renewal the meters of size 96X96 volt meter 0-500V-1no,Ammeter 0-100A-1no,Phase sequence meter 415V,3ph,50Hz-1 no

2010 Eqpt/System: Shore Supply Box. Make:Marine Electrical,100amps,415V,3ph (e) Mechanical cleaning of supply panel board & painted with one coat of primer and one coat of enamel paint (white color paint from inside and gray color paint from outside).

2010 Eqpt/System: Shore Supply Box. Make:Marine Electrical,100amps,415V,3ph (f ) Check insulation of the cable between shore supply box and switch board. Renew if found below limits

2011 Eqpt/System: SMF Lead Acid Batteries. Make:Exide,200AH,12V

2011 Eqpt/System: SMF Lead Acid Batteries. Make:Exide,200AH,12V (a) Routines of batteries to be undertaken and proved for operation

2011 Eqpt/System: SMF Lead Acid Batteries. Make:Exide,200AH,12V (b) Renew batteries

2011 Eqpt/System: SMF Lead Acid Batteries. Make:Exide,200AH,12V (c )Clean & Tighten the all connections with proper lugs, ferrules & connecters

2011 Eqpt/System: SMF Lead Acid Batteries. Make:Exide,200AH,12V (d) Renew the Battery connectors

2011 Eqpt/System: SMF Lead Acid Batteries. Make:Exide,200AH,12V (e ) Renew the Short link cable (50sq.mm multi stand copper cables,Length 0.5mtr ) connectors

2011 Eqpt/System: SMF Lead Acid Batteries. Make:Exide,200AH,12V (f) Renew the Parallel link cable connectors in emergency batteries bank

2012 Eqpt/System: Main Broad cast system . Make:Philips,Type:VRC-10M-50 /A100K10070

2012 Eqpt/System: Main Broad cast system . Make:Philips,Type:VRC-10M-50 /A100K10070 (a) Carryout over haul routines of amplifier and prove for satisfactory performance

2012 Eqpt/System: Main Broad cast system . Make:Philips,Type:VRC-10M-50 /A100K10070 (b) Renew the speakers and prove for satisfactory performance

2012 Eqpt/System: Main Broad cast system . Make:Philips,Type:VRC-10M-50 /A100K10070 (c ) Check all the call back stations functions, prove it for satisfactory performance

2012 Eqpt/System: Main Broad cast system . Make:Philips,Type:VRC-10M-50 /A100K10070 (d) New clamps,securing arrangment to made for mounting speaker

2012 Eqpt/System: Main Broad cast system . Make:Philips,Type:VRC-10M-50 /A100K10070 (e ) Renew all micro switches & Push buttons.

2013 Eqpt/System: Float Level Switches .Make:B.K.Equipments Carryout overhaul routines of the following float level system and calibrate all level sensors, switches & proove them for satisfactory performance

2013 Eqpt/System: Float Level Switches .Make:B.K.Equipments Carryout overhaul routines of the following float level system and calibrate all level sensors, switches & proove them for satisfactory performance (a) Fresh Water Daily serviceTank (Gravitational) at 01 deck (stbd side of wheel house) (High level-1no, Low level-1 no)-2 Nos

2013 Eqpt/System: Float Level Switches .Make:B.K.Equipments Carryout overhaul routines of the following float level system and calibrate all level sensors, switches & proove them for satisfactory performance (b) Fuel oil daily servise(FODS) tanks (2 Nos for port & stbd) low level switches-1No for each tank

2013 Eqpt/System: Float Level Switches .Make:B.K.Equipments Carryout overhaul routines of the following float level system and calibrate all level sensors, switches & proove them for satisfactory performance (c ) Lub oil Tank in engine room (High level-1no,Low level-1no)-2 Nos

2013 Eqpt/System: Float Level Switches .Make:B.K.Equipments Carryout overhaul routines of the following float level system and calibrate all level sensors, switches & proove them for satisfactory performance (d) Dirty oil Tank in engine room (High level-1no)-1 no

2013 Eqpt/System: Float Level Switches .Make:B.K.Equipments Carryout overhaul routines of the following float level system and calibrate all level sensors, switches & proove them for satisfactory performance (e ) Engine room bilge high level-2Nos

2014 Eqpt/System: Renewal of Battery Accomodation Boxes with high quality hylem sheets 12mm

2014 Eqpt/System: Renewal of Battery Accomodation Boxes with high quality hylem sheets 12mm (a) 6 in nos Batteries (180AH12V) are accomodated in 3 sections of one box

2014 Eqpt/System: Renewal of Battery Accomodation Boxes with high quality hylem sheets 12mm (b) 2 in nos Batteries (180AH12V) are accomodated in one box

2015 Metal Clad W/T Double Pole on/off Switches 6A,240V Make:LEC,Type-MRS515A (a) Renew the switches and connect in circuits and proove them for satisfactory performance

2016 Non W/T on/off Switches 6A,240V Make:Commercial, (a) Renew the switches and connect in circuits and proove them for satisfactory performance

2017 Metal Clad W/T DP on/off Switches 6A,24V Make:LEC,Type-WSS255A (a) Renew the switches and connect in circuits and proove them for satisfactory performance

2018 Metal Clad W/T DP on/off Switche sockets 16A,240V Make:LEC. (a) Renew the switches and connect in circuits and proove them for satisfactory performance

2019 Non W/T Switche Sockets 6A,240V Make:Anchor/Hevels (a) Renew the switches and connect in circuits and proove them for satisfactory performance

2020 Non W/T Switche Sockets 16A,240V Make:Anchor/Hevels (a) Renew the switches and connect in circuits and proove them for satisfactory performance

2021 Eqpt/System: Wall mounted Electrical fans (Oscillating) Make:C&G/Bajaj/Philips, Type- 400 mm Sweep (a) Renew the fans, fitted at various places and prove them for satisfactory performance.

2022 Eqpt/System: Sound Power Telephone Units Make:Amplidan,Type:SPT9010-6Nos,SPT9011-1no (a) Carryout complete overhaul routines and proove them for satisfactory performance / Made operational

2023 Eqpt/System: V.H.F.Set Make:Sailor,Type:TX/RX RT 2048 (routine may be carried out with assistance of OEM or equivelent).Carryout complete overhaul routines and prove them for satisfactory performance / Made operational (a) Calibrate the unit & test all the channels (HZs) & rectify defect in VHF set

2023 Eqpt/System: V.H.F.Set Make:Sailor,Type:TX/RX RT 2048 (routine may be carried out with assistance of OEM or equivelent).Carryout complete overhaul routines and prove them for satisfactory performance / Made operational (b) Carry out operational checks of VHF antena

2023 Eqpt/System: V.H.F.Set Make:Sailor,Type:TX/RX RT 2048 (routine may be carried out with assistance of OEM or equivelent).Carryout complete overhaul routines and prove them for satisfactory performance / Made operational (c ) Renew VHF (RF cable) from Antenna to VHF set

2024 Eqpt/System: Distribution Boards, (PDB-2Nos,LDB-3Nos,DC DBs-3) Make:Marine Electrical. Carryout complete overhaul routines and prove them for satisfactory performance / Made operational (which includes fixing of broken hinges of door cleaning, painting, crimpping of proper lugs, renewal of brocken terminal blocks,and fixing of insulated abonite sheet inside DB) & (calibration certificates/test reports from NABL recognised Labs are to be submitted for MCBs) (a) Eqpt/System: Power Distribution Boards Make:Marine Electrical, 415V,3Ph,50Hz

2024 Eqpt/System: Distribution Boards, (PDB-2Nos,LDB-3Nos,DC DBs-3) Make:Marine Electrical. Carryout complete overhaul routines and prove them for satisfactory performance / Made operational (which includes fixing of broken hinges of door cleaning, painting, crimpping of proper lugs, renewal of brocken terminal blocks,and fixing of insulated abonite sheet inside DB) & (calibration certificates/test reports from NABL recognised Labs are to be submitted for MCBs) (a) Eqpt/System: Power Distribution Boards Make:Marine Electrical, 415V,3Ph,50Hz (a1) The PDB consists of the following MCBs Make: Marlin Gerin 1) MCBs Model- DPMCB C60H, 02Amps-5nos 2) MCBs Model- DPMCB C60H, 6Amps-10nos 3)MCBs Model- DPMCB C60H, 10Amps-10nos 4) MCBs Model- TPMCB C60H, 16Amps-6nos 5) Renew the indication lamps & holders 4nos.

2024 Eqpt/System: Distribution Boards, (PDB-2Nos,LDB-3Nos,DC DBs-3) Make:Marine Electrical. Carryout complete overhaul routines and prove them for satisfactory performance / Made operational (which includes fixing of broken hinges of door cleaning, painting, crimpping of proper lugs, renewal of brocken terminal blocks,and fixing of insulated abonite sheet inside DB) & (calibration certificates/test reports from NABL recognised Labs are to be submitted for MCBs) (a) Eqpt/System: Power Distribution Boards Make:Marine Electrical, 415V,3Ph,50Hz (a2) Renew the clip on type terminals (connectors) Make: phonix contact,Type UK2.5B

2024 Eqpt/System: Distribution Boards, (PDB-2Nos,LDB-3Nos,DC DBs-3) Make:Marine Electrical. Carryout complete overhaul routines and prove them for satisfactory performance / Made operational (which includes fixing of broken hinges of door cleaning, painting, crimpping of proper lugs, renewal of brocken terminal blocks,and fixing of insulated abonite sheet inside DB) & (calibration certificates/test reports from NABL recognised Labs are to be submitted for MCBs) (a) Eqpt/System: Power Distribution Boards Make:Marine Electrical, 415V,3Ph,50Hz (a3 ) Renew the clip on type terminals (connectors) Make: phonix contact,Type UK 6N

2024 Eqpt/System: Distribution Boards, (PDB-2Nos,LDB-3Nos,DC DBs-3) Make:Marine Electrical. Carryout complete overhaul routines and prove them for satisfactory performance / Made operational (which includes fixing of broken hinges of door cleaning, painting, crimpping of proper lugs, renewal of brocken terminal blocks,and fixing of insulated abonite sheet inside DB) & (calibration certificates/test reports from NABL recognised Labs are to be submitted for MCBs) (b) Eqpt/System: Lighting Distribution Boards Make:Marine Electrical, 415V,3Ph,50Hz

2024 Eqpt/System: Distribution Boards, (PDB-2Nos,LDB-3Nos,DC DBs-3) Make:Marine Electrical. Carryout complete overhaul routines and prove them for satisfactory performance / Made operational (which includes fixing of broken hinges of door cleaning, painting, crimpping of proper lugs, renewal of brocken terminal blocks,and fixing of insulated abonite sheet inside DB) & (calibration certificates/test reports from NABL recognised Labs are to be submitted for MCBs) (b) Eqpt/System: Lighting Distribution Boards Make:Marine Electrical, 415V,3Ph,50Hz (b1) The LDB was Consisting of the following MCBs Make: Marlin Gerin 1) MCBs Model- DPMCB C60H, 02Amps -3nos,2) MCBs Model- DPMCB C60H, 6Amps-28nos, 3) MCBs Model- DPMCB C60H, 10Amps-10nos, 4) MCBs Model- DPMCB C60H, 16Amps-4nos, 5) MCBs Model- TPMCB C60H, 16Amps-2nos,6) MCBs Model- TPMCB C60H, 20Amps -1no.(total-48nos)

2024 Eqpt/System: Distribution Boards, (PDB-2Nos,LDB-3Nos,DC DBs-3) Make:Marine Electrical. Carryout complete overhaul routines and prove them for satisfactory performance / Made operational (which includes fixing of broken hinges of door cleaning, painting, crimpping of proper lugs, renewal of brocken terminal blocks,and fixing of insulated abonite sheet inside DB) & (calibration certificates/test reports from NABL recognised Labs are to be submitted for MCBs) (b) Eqpt/System: Lighting Distribution Boards Make:Marine Electrical, 415V,3Ph,50Hz (b2) Renew the indication lamps & holders

2024 (b3) Renew the clip on type terminals (connectors) Make: phonix contact,Type UK2.5B

2024 (b4 ) Renew the clip on type terminals (connectors) Make: phonix contact,Type UK 6N

2024 Eqpt/System: Distribution Boards, (PDB-2Nos,LDB-3Nos,DC DBs-3) Make:Marine Electrical. Carryout complete overhaul routines and prove them for satisfactory performance / Made operational (which includes fixing of broken hinges of door cleaning, painting, crimpping of proper lugs, renewal of brocken terminal blocks,and fixing of insulated abonite sheet inside DB) & (calibration certificates/test reports from NABL recognised Labs are to be submitted for MCBs) (c ) Eqpt/System: 24V DC DB & Distribution Board Fuse Boxes Make:Marine Electrical,24V,DC

2024 Eqpt/System: Distribution Boards, (PDB-2Nos,LDB-3Nos,DC DBs-3) Make:Marine Electrical. Carryout complete overhaul routines and prove them for satisfactory performance / Made operational (which includes fixing of broken hinges of door cleaning, painting, crimpping of proper lugs, renewal of brocken terminal blocks,and fixing of insulated abonite sheet inside DB) & (calibration certificates/test reports from NABL recognised Labs are to be submitted for MCBs) (c ) Eqpt/System: 24V DC DB & Distribution Board Fuse Boxes Make:Marine Electrical,24V,DC (c1) The DC DBs (Included 3 DBs) was Consisting of the following Components (1) HRC Fuse Links Make:Siamens 2A-8nos,4A-4nos,6A-30nos,10A-16nos,20A-6nos,32A-2nos,(Total-66nos) &(2) HRC fuse fittings Make Siamens: 20A-64nos.32A-2nos (Total-66nos) (3) indication lamps Make:Telemecanique -3nos, (4) clip on terminals Make:Phonix contact -80nos, (5) MCBs Model- DPMCB C60H, 02A-1no,6A-2nos,20A-5nos,32A-2nos,63A-1no,(total-11nos) (6) Contactors 40A DC-1no,220V AC-1no

2024 Eqpt/System: Distribution Boards, (PDB-2Nos,LDB-3Nos,DC DBs-3) Make:Marine Electrical. Carryout complete overhaul routines and prove them for satisfactory performance / Made operational (which includes fixing of broken hinges of door cleaning, painting, crimpping of proper lugs, renewal of brocken terminal blocks,and fixing of insulated abonite sheet inside DB) & (calibration certificates/test reports from NABL recognised Labs are to be submitted for MCBs) (c ) Eqpt/System: 24V DC DB & Distribution Board Fuse Boxes Make:Marine Electrical,24V,DC (c2) Mechanical cleaning to be done for Distribution panel body & painted with one one coat of primer and one coat of enamel paint (white color paint from inside and gray color paint from outside).

2025 Eqpt/System: Aqua Guard cum Cooling Water Drinking System Make Blue star,Model:TN 10;10ltrs capacity,230V,1Ph,50Hz (a) provide and install the water cooler and prove them for satisfactory operational performance. Make Blue star,10ltrs capacity,230V,1Ph (it was equiped with level switch to prevent over flowing)

2026 Eqpt/System: Battery charging Units Make:Edna Associates Input;415V, 3ph, 50Hz. Out put 24V,DC (1.5KW-1no(location at under W/H),0.5KW-3Nos(locations at E/R-1no,SRP-2nos)),& Input; 230V, 3ph, 50Hz. Out put 12V/24V/36DC (0.5KW-1Nos(Location at E/R), (a) One in no 230V,AC/12V,DC charger unit to be Renew ( Along with make neccesary cabling work to be done) And made it operational

2026 Eqpt/System: Battery charging Units Make:Edna Associates Input;415V, 3ph, 50Hz. Out put 24V,DC (1.5KW-1no(location at under W/H),0.5KW-3Nos(locations at E/R-1no,SRP-2nos)),& Input; 230V, 3ph, 50Hz. Out put 12V/24V/36DC (0.5KW-1Nos(Location at E/R), (b) Carryout complete overhauling and proove them for satisfactory performance / Made operational

2027 Eqpt/System: Call Bell Unit 24V,DC; Make:Lite shine Electricals. (a) Carryout complete overhauling and proove them for satisfactory performance / Made operational

2027 Eqpt/System: Call Bell Unit 24V,DC; Make:Lite shine Electricals. (b) Renew the Push buttons

2027 Eqpt/System: Call Bell Unit 24V,DC; Make:Lite shine Electricals. (c ) Renew the indication lamp with holder (2.5 cm dia cap)

2028 Eqpt/System: Self Starter 5HP,24V,DC for Starting of Generator Primemover Make;TVS (a) Carryout overhauling of DC self starter

2028 Eqpt/System: Self Starter 5HP,24V,DC for Starting of Generator Primemover Make;TVS (b) Renewal of DC self starter

2029 Eqpt/System: 24V,Dynamo Make:TVS (a) Renewal of Dynamo

2029 Eqpt/System: 24V,Dynamo Make:TVS (b) Carryout overhauling of Dyanamo.

2030 Eqpt/System: Lighting Transformers 415V to 220V,50Hz,1Ph 5KVA (a) Carryout complete overhaul routines and proove them for satisfactory performance / Made operational

2031 Eqpt/System: Metal Clad W/T sockets with on/off Switches 5A,240V Make LEC,Type (a) Renew the Switch cum Sockets and connect in circuits and proove them for satisfactory performance & Made them operational

2032 Eqpt/System: Gong Bell Make-KHERAJ,Type-Chromium Gong, Model--NQ-GB-15,24V,DC. (a) Overhaul the Gong bells & made it operational

2032 Eqpt/System: Gong Bell Make-KHERAJ,Type-Chromium Gong, Model--NQ-GB-15,24V,DC. (b) Check all circuits continuities & Rectify if there is any problems

2033 Eqpt/System: Supply Change over unit.for SRP System.24V,DC Make:Rolls Royce (a) Carryout complete overhaul routines and proove them for satisfactory performance / Made operational, pls specify routines??

2034 Eqpt/System: Bench Grinding Machine 230V,0.5HP,2900RPM Make:Toolex Industries (india):Carryout complete overhaul routines and proove them for satisfactory performance / Made

2035 Eqpt/System:Motors Over hauling: carry out complete over hauling of the following motors and prove for satisfactory operation. (total 17 Nos) Note (i) Job involves renewal of Name plate, cooling fan end cover gaurd. Only zz standard bearing (SKF/FAG) is to be used. (a) Anchor windlass motor 415V, 3Ph, 50Hz, 7.5HP

2035 Eqpt/System:Motors Over hauling: carry out complete over hauling of the following motors and prove for satisfactory operation. (total 17 Nos) Note (i) Job involves renewal of Name plate, cooling fan end cover gaurd. Only zz standard bearing (SKF/FAG) is to be used. (b) Capstan Motor 415 V, 3 Ph, 50 Hz,12HP

2035 Eqpt/System:Motors Over hauling: carry out complete over hauling of the following motors and prove for satisfactory operation. (total 17 Nos) Note (i) Job involves renewal of Name plate, cooling fan end cover gaurd. Only zz standard bearing (SKF/FAG) is to be used. (c ) Engine room supply fan motors 415v,3ph,50Hz,7.5HP,

2035 Eqpt/System:Motors Over hauling: carry out complete over hauling of the following motors and prove for satisfactory operation. (total 17 Nos) Note (i) Job involves renewal of Name plate, cooling fan end cover gaurd. Only zz standard bearing (SKF/FAG) is to be used. (d) Engine room Exaust fan motor 415v,3ph,50Hz 5HP,

2035 Eqpt/System:Motors Over hauling: carry out complete over hauling of the following motors and prove for satisfactory operation. (total 17 Nos) Note (i) Job involves renewal of Name plate, cooling fan end cover gaurd. Only zz standard bearing (SKF/FAG) is to be used. (e ) SRP supply fan motor/blower 415V,3Ph,50Hz,0.25HP

2035 Eqpt/System:Motors Over hauling: carry out complete over hauling of the following motors and prove for satisfactory operation. (total 17 Nos) Note (i) Job involves renewal of Name plate, cooling fan end cover gaurd. Only zz standard bearing (SKF/FAG) is to be used. (f) Lub Oil Priming Pump Motors (Port & Stbd). 415v,3ph,50Hz,3HP,Make:ABB Motors,

2035 Eqpt/System:Motors Over hauling: carry out complete over hauling of the following motors and prove for satisfactory operation. (total 17 Nos) Note (i) Job involves renewal of Name plate, cooling fan end cover gaurd. Only zz standard bearing (SKF/FAG) is to be used. (g) Fuel Oil Transfor Pump Motor. 415v,3ph,50Hz,3HP,

2035 Eqpt/System:Motors Over hauling: carry out complete over hauling of the following motors and prove for satisfactory operation. (total 17 Nos) Note (i) Job involves renewal of Name plate, cooling fan end cover gaurd. Only zz standard bearing (SKF/FAG) is to be used. (h) Air Compressor Motor. 415v,3ph,50Hz,5HP,

2035 Eqpt/System:Motors Over hauling: carry out complete over hauling of the following motors and prove for satisfactory operation. (total 17 Nos) Note (i) Job involves renewal of Name plate, cooling fan end cover gaurd. Only zz standard bearing (SKF/FAG) is to be used. (i) Bilge/GS Pump Motors. 415v,3ph,50Hz,12.5HP,

2035 Eqpt/System:Motors Over hauling: carry out complete over hauling of the following motors and prove for satisfactory operation. (total 17 Nos) Note (i) Job involves renewal of Name plate, cooling fan end cover gaurd. Only zz standard bearing (SKF/FAG) is to be used. (j) SRP Cooling Pump Motor. 415v,3ph,50Hz,5HP,

2035 Eqpt/System:Motors Over hauling: carry out complete over hauling of the following motors and prove for satisfactory operation. (total 17 Nos) Note (i) Job involves renewal of Name plate, cooling fan end cover gaurd. Only zz standard bearing (SKF/FAG) is to be used. (k) Fresh Water Pump Motors . 415v,3ph,50Hz,1HP,

2035 Eqpt/System:Motors Over hauling: carry out complete over hauling of the following motors and prove for satisfactory operation. (total 17 Nos) Note (i) Job involves renewal of Name plate, cooling fan end cover gaurd. Only zz standard bearing (SKF/FAG) is to be used. (l) Fuel Oil saperator Pump Motor. 415v,3ph,50Hz,1HP,

2035 Eqpt/System:Motors Over hauling: carry out complete over hauling of the following motors and prove for satisfactory operation. (total 17 Nos) Note (i) Job involves renewal of Name plate, cooling fan end cover gaurd. Only zz standard bearing (SKF/FAG) is to be used. (m) Submercible Pump Motor 430V,3Ph,40TPH,10HP

2036 Eqpt/System: Starters Make:Marine Electrical,415V,3Ph,50Hz Carryout complete overhaul of below mentioned starters/control panel and prove them for satisfactory performance. (Job including calibration of OLRS,SPPs,Timers). overhauling of following starter panels (a) Anchor Windlass Control panel

2036 Eqpt/System: Starters Make:Marine Electrical,415V,3Ph,50Hz Carryout complete overhaul of below mentioned starters/control panel and prove them for satisfactory performance. (Job including calibration of OLRS,SPPs,Timers). overhauling of following starter panels (b) Capstan control panel

2036 Eqpt/System: Starters Make:Marine Electrical,415V,3Ph,50Hz Carryout complete overhaul of below mentioned starters/control panel and prove them for satisfactory performance. (Job including calibration of OLRS,SPPs,Timers). overhauling of following starter panels (c) 12.5 HP starters (Star Delta Starters)

2036 Eqpt/System: Starters Make:Marine Electrical,415V,3Ph,50Hz Carryout complete overhaul of below mentioned starters/control panel and prove them for satisfactory performance. (Job including calibration of OLRS,SPPs,Timers). overhauling of following starter panels (d) 7.5 HP starters (Star Delta Starters)

2036 Eqpt/System: Starters Make:Marine Electrical,415V,3Ph,50Hz Carryout complete overhaul of below mentioned starters/control panel and prove them for satisfactory performance. (Job including calibration of OLRS,SPPs,Timers). overhauling of following starter panels (e ) 5 HP starters (Star Delta Starter)

2036 Eqpt/System: Starters Make:Marine Electrical,415V,3Ph,50Hz Carryout complete overhaul of below mentioned starters/control panel and prove them for satisfactory performance. (Job including calibration of OLRS,SPPs,Timers). overhauling of following starter panels (f) 3 HP starters (DOL Starter)

2036 Eqpt/System: Starters Make:Marine Electrical,415V,3Ph,50Hz Carryout complete overhaul of below mentioned starters/control panel and prove them for satisfactory performance. (Job including calibration of OLRS,SPPs,Timers). overhauling of following starter panels (g) 1 HP starters (DOL Starter)

2036 Eqpt/System: Starters Make:Marine Electrical,415V,3Ph,50Hz Carryout complete overhaul of below mentioned starters/control panel and prove them for satisfactory performance. (Job including calibration of OLRS,SPPs,Timers). overhauling of following starter panels (h) 0.25HP Starters (DOL Starter)

2036 (i) Starter for Submersible Pump Motor 430V,3Ph,40TPH,10HP

2036 (j) replace following as per their rating.

2036 Eqpt/System: Starters Make:Marine Electrical,415V,3Ph,50Hz Carryout complete overhaul of below mentioned starters/control panel and prove them for satisfactory performance. (Job including calibration of OLRS,SPPs,Timers). overhauling of following starter panels 2036(j) replace following as per their rating. (j1)OLRs (Over load relay)

2036 Eqpt/System: Starters Make:Marine Electrical,415V,3Ph,50Hz Carryout complete overhaul of below mentioned starters/control panel and prove them for satisfactory performance. (Job including calibration of OLRS,SPPs,Timers). overhauling of following starter panels 2036(j) replace following as per their rating. (j2) SPPs (Single phase protection unit )

2036 Eqpt/System: Starters Make:Marine Electrical,415V,3Ph,50Hz Carryout complete overhaul of below mentioned starters/control panel and prove them for satisfactory performance. (Job including calibration of OLRS,SPPs,Timers). overhauling of following starter panels 2036(j) replace following as per their rating. (j3) Timers

2036 Eqpt/System: Starters Make:Marine Electrical,415V,3Ph,50Hz Carryout complete overhaul of below mentioned starters/control panel and prove them for satisfactory performance. (Job including calibration of OLRS,SPPs,Timers). overhauling of following starter panels (k) Renew the Neoprene Rubber Gasket for water tight purpose-for all doors of starter /control panel

2036 Eqpt/System: Starters Make:Marine Electrical,415V,3Ph,50Hz Carryout complete overhaul of below mentioned starters/control panel and prove them for satisfactory performance. (Job including calibration of OLRS,SPPs,Timers). overhauling of following starter panels (m) Renew the door interlock on/off switch to be replaced with same capacity panel mounting rotary cam switch (3ph,on/off) for all starters & Adjusting internal wiring (incoming & out going for on/off switch) system to wards switch

2037 Eqpt/System: Generators/Alternator Make:Kirlosker,415V,3Ph,100KVA,50Hz,1500RPM Carryout routines mentioned below and prove them for satisfactory performance.(routine may be carried out with assistance of OEM or authorised Rep) (a) overhaul+B785:B796 the generators/alternator

2037 Eqpt/System: Generators/Alternator Make:Kirlosker,415V,3Ph,100KVA,50Hz,1500RPM Carryout routines mentioned below and prove them for satisfactory performance.(routine may be carried out with assistance of OEM or authorised Rep) (b) Check the insulation of Alternator with 500V Megger. The insulation resistance should not be less than 2 mega ohm. If less isolate the system and improve the insulation. Check inductance and capacitance of the alternator winding.Check the continuty of windings if there is any opening circuit in windings.

2037 Eqpt/System: Generators/Alternator Make:Kirlosker,415V,3Ph,100KVA,50Hz,1500RPM Carryout routines mentioned below and prove them for satisfactory performance.(routine may be carried out with assistance of OEM or authorised Rep) (c ) Check the clearances (air gaps) between the stator & rotor at main winding & excitor winding.submt report post checks

2037 Eqpt/System: Generators/Alternator Make:Kirlosker,415V,3Ph,100KVA,50Hz,1500RPM Carryout routines mentioned below and prove them for satisfactory performance.(routine may be carried out with assistance of OEM or authorised Rep) (d) Rewind alternator if insulation found below specific limit and inductance and capacitance value of winding found imbalance or winding found open circuit.

2037 Eqpt/System: Generators/Alternator Make:Kirlosker,415V,3Ph,100KVA,50Hz,1500RPM Carryout routines mentioned below and prove them for satisfactory performance.(routine may be carried out with assistance of OEM or authorised Rep) (e) Carryout varnishing of rotor and stator winding.

2037 Eqpt/System: Generators/Alternator Make:Kirlosker,415V,3Ph,100KVA,50Hz,1500RPM Carryout routines mentioned below and prove them for satisfactory performance.(routine may be carried out with assistance of OEM or authorised Rep) (f ) Carryout balancing of rotor.

2037 Eqpt/System: Generators/Alternator Make:Kirlosker,415V,3Ph,100KVA,50Hz,1500RPM Carryout routines mentioned below and prove them for satisfactory performance.(routine may be carried out with assistance of OEM or authorised Rep) (g) Inspection of Lugs, clean the lugs with zero paper and replace if damaged.

2037 Eqpt/System: Generators/Alternator Make:Kirlosker,415V,3Ph,100KVA,50Hz,1500RPM Carryout routines mentioned below and prove them for satisfactory performance.(routine may be carried out with assistance of OEM or authorised Rep) (h) Check the condition of all sealing of the alternators, repaired if required.

2037 Eqpt/System: Generators/Alternator Make:Kirlosker,415V,3Ph,100KVA,50Hz,1500RPM Carryout routines mentioned below and prove them for satisfactory performance.(routine may be carried out with assistance of OEM or authorised Rep) (j) Check the rotating rectifier assembly for any loose connection and check proper connection.renew diodes

2037 Eqpt/System: Generators/Alternator Make:Kirlosker,415V,3Ph,100KVA,50Hz,1500RPM Carryout routines mentioned below and prove them for satisfactory performance.(routine may be carried out with assistance of OEM or authorised Rep) (k) Take SPM reading of DE/NDE bearing of alternators; carry out greasing by grease gun if required (yellow zone).

2037 Eqpt/System: Generators/Alternator Make:Kirlosker,415V,3Ph,100KVA,50Hz,1500RPM Carryout routines mentioned below and prove them for satisfactory performance.(routine may be carried out with assistance of OEM or authorised Rep) (m) Renew the Bearings of both DE & NDE.

2037 Eqpt/System: Generators/Alternator Make:Kirlosker,415V,3Ph,100KVA,50Hz,1500RPM Carryout routines mentioned below and prove them for satisfactory performance.(routine may be carried out with assistance of OEM or authorised Rep) (m) Renew the IEVR-2 (Aumatic Voltage Regulator)

2038 Overhauling and serviceability of main engine control system, Make : ALTOP Industries ltd, Type 1010, Sr no 088D09 (routine to be carried out with assistance of OEM) (a) Main Engine (port & stbd) alarm panel system to be checked, calibrated, to be proved for satisfactory operation including wheel house panel (remote panel) which includes renewal of broken switches (qty-15)indication lamp fitting (qty-30), renewal of perished control wiring with crimping of suitable lugs at both ends and securing of cable inside panel,overhauling of Engine and SRP operation system from bridge. All safety devices to be overhauled and proved for correct operation. (all paramenter to be synchronised with wheel house and engine room control panels.)

2038 (b) Following digital indicators to be calibrated and proved,

2038 (b) Following digital indicators to be calibrated and proved, (b1) Lube oil pressure indicator

2038 (b) Following digital indicators to be calibrated and proved, (b2)Lube oil temperature indicator

2038 (b) Following digital indicators to be calibrated and proved, (b3)Voltmeter

2038 (b) Following digital indicators to be calibrated and proved, (b4)Fresh water tmperature (Left bank and Right bank)

2038 (b) Following digital indicators to be calibrated and proved, (b5)Hooter

2038 (b) Following digital indicators to be calibrated and proved, (b6)Exaust Temperature (Left bank and Right bank)

2038 (b) Following digital indicators to be calibrated and proved, (b7)RPM monitor indicator

2038 (b) Following digital indicators to be calibrated and proved, (b8)Annunciation indicator, make - minilec, model-microwarn 0600

2038 (b) Following digital indicators to be calibrated and proved, (b9)Hour counter

2038 (c ) Renewal of following digital indicators.

2038 (c ) Renewal of following digital indicators. (c1) Lube oil pressure indicator

2038 (c ) Renewal of following digital indicators. (c2) Lube oil temperature indicator

2038 (c ) Renewal of following digital indicators. (c3) Voltmeter

2038 (c ) Renewal of following digital indicators. (c4) Fresh water tmperature (Left bank and Right bank)

2038 (c ) Renewal of following digital indicators. (c5) Hooter

2038 (c ) Renewal of following digital indicators. (c6) Exaust Temperature (Left bank and Right bank)

2038 (c ) Renewal of following digital indicators. (c7) RPM monitor indicator

2038 (c ) Renewal of following digital indicators.2038(c8) Annunciation indicator, make - minilec, model-microwarn 0600

2038 (c ) Renewal of following digital indicators. (c9) Hour counter

2038 (d) Following cutouts to be calibrated

2038 (d) Following cutouts to be calibrated (d1) Low Lube oil pressure cutout alarm set point at 0.5 Kg/cm and trip set point at 1.8 Kg/cmsq

2038 (d) Following cutouts to be calibrated (d2) Lube oil temperature cutout alarm set point at 97°C and trip set point at 105°C

2038 (d) Following cutouts to be calibrated (d3) Fresh water temperature cutout alarm set point at 92°C and trip set point at 97°C

2038 (d) Following cutouts to be calibrated (d4) exhaust temperature cutout alarm set point at 400 °C and trip set point at 500 °C

2038 (d) Following cutouts to be calibrated (d5) Over speed trip set point at 1980rpm.

2038 (e ) Renewal of cutouts as per follows.

2038 (e ) Renewal of cutouts as per follows. (e1)Low Lube oil pressure cutout alarm set point at 0.5 Kg/cm and trip set point at 1.8Kg/cmsq

2038 (e ) Renewal of cutouts as per follows. (e2)Lube oil temperature cutout alarm at 97 °C and trip set point at 105 °C

2038 (e ) Renewal of cutouts as per follows. (e3)Fresh water temperature cutout alarm set point at 92 °C and trip set point at 97°C

2038 (e ) Renewal of cutouts as per follows. (e4)Exhaust temperature cutout alarm set point at 450°C.

2038 (e ) Renewal of cutouts as per follows. (e5)Over speed cutout alarm set point at 1980 rpm.

2038 (f) Following sensors to be calibrated

2038 (f) Following sensors to be calibrated (f1) lube oil pressure sensor

2038 (f) Following sensors to be calibrated (f2) Lube oil temprature sensor

2038 (f) Following sensors to be calibrated (f3) fresh water temperature sensor

2038 (f) Following sensors to be calibrated (f4) Exhaust temperature sensor

2038 (f) Following sensors to be calibrate (f5) RPM sensor

2038 (g) Renewal of the sensors as per follows.

2038 (g) Renewal of the sensors as per follows. (g1) Lube oil pressure sensor

2038 (g) Renewal of the sensors as per follows. (g2) Lube oil temprature sensor

2038 (g) Renewal of the sensors as per follows. (g3) Fresh water temperature sensor

2038 (g) Renewal of the sensors as per follows. (g4) Exhaust temperature sensor

2038 (g) Renewal of the sensors as per follows. (g5) RPM sensor

2039 Eqpt/System:Electrical Horn.(24V,DC) (a) Provide the suitable ship electrical horn for 50mtrs to 75 mtrs length vessels. sound >130db,weather proof,& rust proof material

2039 Eqpt/System:Electrical Horn.(24V,DC) (b) provide the control panel for above ele horn with input supplies of 230V,50Hz,AC,as main supply, & 24V,DC as standby supply.

2040 Eqpt/System:split A/Cs Renew & installing the 3 in nos spilt A/Cs with stabilisers at acommidation-1nos, ( 1.5Tons), Rest room-1no(1Ton),& W/H- 1nos(1.5Ton).Total-1.5Ton-2nos,1Ton-1Nos (the job included the gutting & regutting,laying of cabling)

2040 Eqpt/System:split A/Cs Renew & installing the 3 in nos spilt A/Cs with stabilisers at acommidation-1nos, ( 1.5Tons), Rest room-1no(1Ton),& W/H- 1nos(1.5Ton).Total-1.5Ton-2nos,1Ton-1Nos (the job included the gutting & regutting,laying of cabling) (a) Renew existing transformer with 01 in no Delta/Delta transformer with spec 20 KVA input3Ph,415V,50Hz & out put 3Ph,230V,50Hz.Job to include replacement of old transformer,installations, connections and prove for satisfactory operation.

2040 Eqpt/System:split A/Cs Renew & installing the 3 in nos spilt A/Cs with stabilisers at acommidation-1nos, ( 1.5Tons), Rest room-1no(1Ton),& W/H- 1nos(1.5Ton).Total-1.5Ton-2nos,1Ton-1Nos (the job included the gutting & regutting,laying of cabling) (b) Renew & layin of 3X10sq.mm multi stant copper marine cable (from MSB to under W/H & Transformer to DB at under w/h.)

2040 Eqpt/System:split A/Cs Renew & installing the 3 in nos spilt A/Cs with stabilisers at acommidation-1nos, ( 1.5Tons), Rest room-1no(1Ton),& W/H- 1nos(1.5Ton).Total-1.5Ton-2nos,1Ton-1Nos (the job included the gutting & regutting,laying of cabling) (c ) Renew & laying of 3X6sq.mm multi stant copper marine cable (from DB at under W/H to various ac locations via switches for 7 in nos a/cs (i.e including 1 in no existing A/c in W/h)

2040 Eqpt/System:split A/Cs Renew & installing the 3 in nos spilt A/Cs with stabilisers at acommidation-1nos, ( 1.5Tons), Rest room-1no(1Ton),& W/H- 1nos(1.5Ton).Total-1.5Ton-2nos,1Ton-1Nos (the job included the gutting & regutting,laying of cabling) (d) Renew & install the 1 in no Mcb DB Which is required to have 10 in nos DP MCB 20A,2 nos TP 60A mcb,

2040 Eqpt/System:split A/Cs Renew & installing the 3 in nos spilt A/Cs with stabilisers at acommidation-1nos, ( 1.5Tons), Rest room-1no(1Ton),& W/H- 1nos(1.5Ton).Total-1.5Ton-2nos,1Ton-1Nos (the job included the gutting & regutting,laying of cabling) (e ) Renew & install the 3 in nos Ac sockets

2040 Eqpt/System:split A/Cs Renew & installing the 3 in nos spilt A/Cs with stabilisers at acommidation-1nos, ( 1.5Tons), Rest room-1no(1Ton),& W/H- 1nos(1.5Ton).Total-1.5Ton-2nos,1Ton-1Nos (the job included the gutting & regutting,laying of cabling) (f) Renew & install the 4 in nos Ac stabilisers.

2040 Eqpt/System:split A/Cs Renew & installing the 3 in nos spilt A/Cs with stabilisers at acommidation-1nos, ( 1.5Tons), Rest room-1no(1Ton),& W/H- 1nos(1.5Ton).To tal-1.5Ton-2nos,1Ton-1Nos (the job included the gutting & regutting,laying of cabling) (g) Servising/overhauling of split A/Cs (presently all are working).

2041 EQPT/SYSTEM: Ship illumination name boards (a) Renewal/Remake the ship illumination board with acrylic sheets for both sides with openable door for maintance purpose Size-1500mmX 750mm & provide the LED tube lights20w,2',230V, 4 nos inside the board

2042 Eqpt / System :- Overhauling of steering system. (Make:Aquamaster/Rolls-Royce,Model:AQM US 1201) (a) Carryout complete overhaul routines & rectify defectives and prove it for satisfactory operational performance.(the system is included of ACP,TDI,AQP (located in W/H), ACU,Power supply unit,supply change over unit,SRP unit (located in SRP compartment), & R/I conver Located in E/R.

2043 Mandatory spares

2043 Mandatory spares (a) LED Bulb,230V,22W (BC Holder type) Make- Sysca

2043 Mandatory spares (b) 6" dia flexible air (duct & Vaccume purpose) hose

2043 Mandatory spares ( c) LED lights,230V,22W (flush mount type) square / rectangular shape Make- Sysca

2043 Mandatory spares (d) power suppply cable 3x25 sqmm, rubber insulated, Copper multi stranded wire marine cable.

2044 Renewal of following meter.(all 96x96 mm)

2044 Renewal of following meter.(all 96x96 mm) (a) 0-500V Volt meter with red mark at 415V Make:Automatic Electric ltd

2044 Renewal of following meter.(all 96x96 mm) (b) 0-200A Ammeter with red mark at 140A, CTR 200/5A Make:Automatic Electric ltd

2044 Renewal of following meter.(all 96x96 mm) (c ) Kilo Watt Meters -15-0-150KW red mark at 80Kw Make:Autromatic Electric ltd

2044 Renewal of following meter.(all 96x96 mm) (d) Frequency Meters 45-50-55Hz rated 415V and red mark at 50Hz Make:Autromatic Electric ltd.

2045 provide the following spares for Steering system. (Make:Aqupilot.)

2045 provide the following spares for Steering system. (Make:Aqupilot.) (a) Auxilary relays Make: RELECO, Model: C9-A41-24DX, 14pins, 24V DC

2045 provide the following spares for Steering system. (Make:Aqupilot.) (b) Relay Base socket for C9 relays Make: RELECO, Model: C9-Relays 14pins, 24V DC

2046 provide the following spares for Steering system. (Make:Aqupilot.) (c) Electronic unit (Make Rolls Royce) for steering control (part no: A 7033172)

2047 provide the following spares for Steering system. (Make:Aqupilot.) (d) connector unit for primary card (Make Rolls Royce) (part no:K73535529-0-001)

2048 provide the following spares for Steering system. (Make:Aqupilot.) (e) Electronic unit (secondary card) (Make Rolls Royce) for steering control (part no: A 7351413---001)

2049 provide the following spares for Steering system. (Make:Aqupilot.) (f) plug for PCB connector unit for secondary card (Make Rolls Royce) (part no:A 7932036)

2050 provide the following spares for Steering system. (Make:Aqupilot.) (g) Angel sensor (part no A7350920-001)

2051 provide the following spares for Steering system. (Make:Aqupilot.) (h) Pressure switches (part no A7429733)

2052 provide the following spares for Steering system. (Make:Aqupilot.) (j) Pressure switches (part no A7429745)

2053 provide the following spares for Steering system. (Make:Aqupilot.) (k) Pressure switches (part no A7427312) (Located at Oil Tank)

2054 provide the following spares for Steering system. (Make:Aqupilot.) (m) Thrust Direction Indicator unit (No A 7450487)

2055 provide the following spares for Steering system. (Make:Aqupilot.) (n) Aquamaster control panel (ACP) unit (in wheel house consol panel) (drawing no 7450482-A-001)

2056 provide the following spares for Steering system. (Make:Aqupilot.) (p) Potentiometer in wheel house (part no:A7351949, & A7352224)

2057 provide the following spares for Steering system. (Make:Aqupilot.) (q) Pulse Amplifier (RPM Convertor) in transimitter box (part no A7351928)

2058 provide the following spares for Steering system. (Make:Aqupilot.) (r) Cable for connect to pulse amplifier (No A 7239001)

2059 provide the following spares for Steering system. (Make:Aqupilot.)(s) Contactor (KM1) for ACU (No A7463584)

2060 provide the following spares for Steering system. (Make:Aqupilot.) (t) plug along with cable for Direction control valves(Hydraulic) solenoids connecting purpose.

2061 provide the following spares for Steering system. (Make:Aqupilot.) (v) Handel key with indication (No A 7420095) (u) Rotary handel with key (No A 7425880)

2062 provide the following spares for Steering system. (Make:Aqupilot.)

2063 provide the following spares for Steering system. (Make:Aqupilot.) (w) Contactor (KCS) for supply change over unit (No A7463528)

2064 provide the following spares for Steering system. (Make:Aqupilot.) (x) Voltage measuring Relay (KCU) for supply change over unit

2065 provide the following spares for Steering system. (Make:Aqupilot.) (y) Auxilary contact block (kCS) for supply change over unit (No A7463548)

2066 provide the following spares for Steering system. (Make:Aqupilot.) (z) Time Relay (KM30) for ACU (No A7479269)

DRY DOCK AND ALLIED SERVICES WORK PACKAGE (A) Docking and undocking charges (Both Versions) Docking and Undocking will be done by Navy in Navy Permises i.e ND(V) /slipway.Firm not to quote.

(B) Dock blocks preparation & laying out as per docking plan Job will be done by Navy .Firm not to quote.

Dock hire charges for an estimated duration of 60 Days as per OCR Dry Dock facility will provided by Navy in Navy Permises i.e ND(v) /slipway.Firm not to quote.

Wet basin/alongside hire charges for the remaining duration (i.e. total refit duration of – 60 days docking period) Dry Dock facility will will provided by Navy in Navy Permises Firm not to quote.

Provision of sufficient lighting for duty staff

Quote for maintenance of two in no. fire lines for the refit duration .

Provision of two transports (cars) for entire refit duration (one for refit Co-ordinating staff and one for ND(V) monitoring Team) for 12 hrs or 100KM/day whichever is less

Provision of stationory / office items for ND(V) / Refit monitoring team for entire refit duration period. Cater budget of Rs 2000/- per month. Requirement will be intimated RMT/ NDV on as requirement basis. Payment at actuals. Note:- firms to quote.

Mail man services (02 Nos) for entire refit duration (one for user department and one for planning / Co-ordinating department ) to be provided for 10 Hrs per day

QC inspection for the entire scope of work by third party IRS/LRS/ABS/QC/TPI for the refit duration as per the QIS. Services will be provided by ND(V)/QC Firm not to quote.

MANDATORY SPARES REQD FOR 24000 HLY ROUTINES - PORT MAIN ENGINE MODEL KTA 3067 M

PORT MAIN ENGINE CYLINDER BLOCK LINER CYL 84099990 3006089

VALVE,PISTON COOLING 84099990 3006089

CRANKSHAFT

CRANKSHAFT DAMPER,VIBRATION 84099990 3628649

SET MAIN BEARING STD. 84099990 KIT3018210

CONN ROD & PISTON (a) KIT,PISTON & RING SET 84099912 KIT3880662

(b)BRG. CON ROD 840999903047390

© SCREW,CONNECTING ROD CAP 3013266

(d) WASHER,PLAIN 205126

( e )DOWEL,PIN 69558

(f) BUSHING 3043909

CAMSHAFT (a)CAMSHAFT 3066894

(b)CAMSHAFT 3066895

(c)BUSHING 205230

(d)BUSHING 3004686

(e)BEARING,THRUST 130083

GASKET SET (a) GASKET SET KIT4072225

(b) SET,LOWER ENGINE GASKET 3804300

HSG. GEAR FRONT COVER (a) BUSHING 205683

(b) BUSHING 3177509

( c )BUSHING 3177510

INJECTOR (a) KIT INJ BARREL PLUG & CUP KIT3238198

(b)BALL,CHECK 167157

(c ) RETAINER,SCREEN 174299

(d) SCREEN,FILTER 3054999

( e )GASKET,INJECTOR 173086

(f)SEAL,O RING 193736

(g)SEAL,O RING 205216

(h)SEAL,O RING 3010510

(i)PLUG,INJECTOR ORIFICE 3045047

(j)PIN,ROLL 203426

(k)SPRING,COMPRESSION 205464

(l) SEAL,INJECTOR 207244

CYLINDER HEAD (a)VALVE,INTAKE 3052820

(b) VALVE EXHAUST 3035110

(c )SPRING,VALVE 3643725

(d)GUIDE,VALVE STEM 3202210

(e )INSERT,VALVE 3086192

(f)INSERT,VALVE 3086193

(g)COLLET,VALVE 205091

(h)RETAINER,VALVE SPRING 205094

(i) ROTATOR,VALVE 3640315

(j) CROSSHEAD,VALVE 3086362

(k)SCREW,CROSSHEAD ADJUSTING 3032697

(l) NUT,HEAVY HEXAGON 203131

TURBOCHARGER (a)KIT,TURBO REPAIR HC5A 3545647

(b)SHAFT & WHEEL 3521034

(c ) IMPELLER,TUR COMPRESSOR 3523420

(d)SCREW,HEXAGON HEAD CAP 3275479

( e )WASHER,LOCK S 604

(f) HOSE TURBO SUPPLY 3019035

(g)HOSE,FLEXIBLE 3630592

WATER PUMP (a)RECONDITIONED PUMP,WATER RO3635809

(b)'O' RING 3007512

LUB OIL COOLER (a )CORE,COOLER 3627295

(b)SEAL,O RING 3010157

( c )GASKET,LUB OIL CLR COVER 3630969

(d) NUT,LOCK 3002126

COVER HAND HOLE

CAP,FILLER

DIPSTICK

CAM FOLLOWER

COVER HAND HOLE PUSH ROD 3017961

PUSH ROD 3057139

ROLLER,CAM FOLLOWER 3016826

PIN,CAM FOLLOWER ROLLER 4009248

LOCKWIRE,TPT ROLLER PIN 205438

SOCKET,CAM FOLLOWER 213559

ROLLER,CAM FOLLOWER 3642505

PIN,CAM FOLLOWER ROLLER 4009247

HSG RKR ARM (a) SCREW,SLOTTED SET 168306

(b) NUT,REGULAR HEXAGON S 212

(c )SHAFT,ROCKER LEVER 3176772

(d) BUSHING 207344

( e )BUSHING 207226

(f) SCREW,HEXAGON HEAD CAP 108602

(g) SCREW,TWELVE POINT CAP 205393

(h) WASHER,PLAIN 205128

(i)PLUG,EXPANSION 203933

BREATHER CRANKCASE

BREATHER CRANKCASE BREATHER,CRANKCASE 3874429

HOSE,PLAIN 3026395

CLAMP,HOSE 43828 C

HOSE,PLAIN 3232210

CLAMP,HOSE 43828 A

PUMP LUB OIL

PUMP LUB OIL PUMP,LUBRICATING OIL 3634643

SEAL,RECTANGULAR RING 3026391

SEAL,RECTANGULAR RING 3026392

THERMOSTAT

THERMOSTAT THERMOSTAT 3629205

GASKET 206443

AFTER COOLER

AFTER COOLER CORE, AFTERCOOLER 3032030

SEAL DUST 3023130

CLAMP 140315

FILTERS

FILTERS LUB OIL FILTER 3889310

ELEMENT, FUEL FILTER 3313306

ELEMENT, AIR CLEANER 3875611

INHIBITOR CORROSION 3167218

RADIWASH AX1013359

WATER SEPARATOR 3873233

ELBOW 3234779

HEAT EXCHANGER

HEAT EXCHANGER CORE,COOLER 3011326

ZINC PLUG 68241

GASKET HEAT EXCHANGER 4009319

GASKET HEAT EXCHANGER 4009318

SEAL,O RING 3011337

BLOCK FUEL & CONNECTOR HOSE,FLEXIBLE AK 6029 SS

HOSE,FLEXIBLE AK 6032 SS

HOSE,FLEXIBLE AK 6034 SS

HOSE,FLEXIBLE AK10021 SS

VALVE,CHECK 3874152

VALVE,CHECK 3874153

FLYWHEEL GEAR,FLYWHEEL RING

PUMP,SEA WATER 3085649

HOSES

HOSES HOSE AK16030 SS

HOSE AK10070 MS

HOSE AK 6065 MS

HOSE AK16014 SS

HOSE AK16090 SS

HOSE AK16048 SS

CONNECTOR, PIPE 3872294

HOSE, ELBOW 3030514

HOSE, ELBOW 3030772

HOSE, HUMP 3030790

CLAMP T BOLT 140314

CLAMP T BOLT 140313

CLAMP T BOLT 125741

FUEL PUMP RECON RO3879477

ANTICIPATORY PARTS DIGITAL TACHOMETER 3232739 Note: The spares indicated at Serials 1.0967 to 1.0968 are anticpatory category only and firms are requested to quote for the same. However, the cost of the same will not be considered for determination of L1.

ANTICIPATORY PARTS CRANK SHAFT,ENGINE 3648617 Note: The spares indicated at Serials 1.0967 to 1.0968 are anticpatory category only and firms are requested to quote for the same. However, the cost of the same will not be considered for determination of L1.

MANDATORY SPARES REQD FOR 24000 HLY ROUTINES - STBD MAIN ENGINE MODEL KTA 3067 M (FOR 01 ENGINE)

CYLINDER BLOCK LINER CYL 3006089

VALVE,PISTON COOLING 3879479

CRANKSHAFT

CRANKSHAFT DAMPER,VIBRATION 3628649

SET MAIN BEARING STD. KIT3018210

CONN ROD & PISTON

CONN ROD & PISTON KIT,PISTON & RING SET KIT3880662

BRG. CON ROD 3047390

SCREW,CONNECTING ROD CAP 3013266

WASHER,PLAIN 205126

DOWEL,PIN 69558

BUSHING 3043909

CAMSHAFT

CAMSHAFT CAMSHAFT 3066894

CAMSHAFT 3066895

BUSHING 205230

BUSHING 3004686

BEARING,THRUST 130083

GASKET SET

GASKET SET GASKET SET KIT4072225

SET,LOWER ENGINE GASKET 3804300

HSG. GEAR FRONT COVER BUSHING 205683

BUSHING 3177509

BUSHING 3177510

INJECTOR

INJECTOR KIT INJ BARREL PLUG & CUP KIT3238198

BALL,CHECK 167157

RETAINER,SCREEN 174299

SCREEN,FILTER 3054999

GASKET,INJECTOR 173086

SEAL,O RING 193736

SEAL,O RING 205216

SEAL,O RING 3010510

PLUG,INJECTOR ORIFICE 3045047

PIN,ROLL 203426

SPRING,COMPRESSION 205464

SEAL,INJECTOR 207244

CYLINDER HEAD

CYLINDER HEAD VALVE,INTAKE 3052820

VALVE EXHAUST 3035110

SPRING,VALVE 3643725

GUIDE,VALVE STEM 3202210

INSERT,VALVE 3086192

INSERT,VALVE 3086193

COLLET,VALVE 205091

RETAINER,VALVE SPRING 205094

ROTATOR,VALVE 3640315

CROSSHEAD,VALVE 3086362

SCREW,CROSSHEAD ADJUSTING 3032697

NUT,HEAVY HEXAGON 203131

TURBOCHARGER

TURBOCHARGER KIT,TURBO REPAIR HC5A 3545647

SHAFT & WHEEL 3521034

IMPELLER,TUR COMPRESSOR 3523420

SCREW,HEXAGON HEAD CAP 3275479

WASHER,LOCK S 604

HOSE TURBO SUPPLY 3019035

HOSE,FLEXIBLE 3630592

WATER PUMP

WATER PUMP RECONDITIONED PUMP,WATER RO3635809

O' RING 3007512

LUB OIL COOLER

LUB OIL COOLER CORE,COOLER 3627295

SEAL,O RING 3010157

GASKET,LUB OIL CLR COVER 3630969

NUT,LOCK 3002126

COVER HAND HOLE

CAP,FILLER

DIPSTICK

CAM FOLLOWER

CAM FOLLOWER PUSH ROD 3017961

PUSH ROD 3057139

ROLLER,CAM FOLLOWER 3016826

PIN,CAM FOLLOWER ROLLER 4009248

LOCKWIRE,TPT ROLLER PIN 205438

SOCKET,CAM FOLLOWER 213559

ROLLER,CAM FOLLOWER 3642505

PIN,CAM FOLLOWER ROLLER 4009247

HSG RKR ARM

HSG RKR ARM SCREW,SLOTTED SET 168306

NUT,REGULAR HEXAGON S 212

SHAFT,ROCKER LEVER 3176772

BUSHING 207344

BUSHING 207226

SCREW,HEXAGON HEAD CAP 108602

SCREW,TWELVE POINT CAP 205393

WASHER,PLAIN 205128

PLUG,EXPANSION 203933

BREATHER CRANKCASE

BREATHER CRANKCASE BREATHER,CRANKCASE 3874429

HOSE,PLAIN 3026395

CLAMP,HOSE 43828 C

HOSE,PLAIN 3232210

CLAMP,HOSE 43828 A

PUMP LUB OIL

PUMP LUB OIL PUMP,LUBRICATING OIL 3634643

SEAL,RECTANGULAR RING 3026391

SEAL,RECTANGULAR RING 3026392

THERMOSTAT

THERMOSTAT THERMOSTAT 3629205

GASKET 206443

AFTER COOLER

AFTER COOLER CORE, AFTERCOOLER 3032030

SEAL DUST 3023130

CLAMP 140315

FILTERS

FILTERS LUB OIL FILTER 3889310

ELEMENT, FUEL FILTER 3313306

ELEMENT, AIR CLEANER 3875611

INHIBITOR CORROSION 3167218

RADIWASH AX1013359

WATER SEPARATOR 3873233

ELBOW 3234779

HEAT EXCHANGER

HEAT EXCHANGER CORE,COOLER 3011326

ZINC PLUG 68241

GASKET HEAT EXCHANGER 4009319

GASKET HEAT EXCHANGER 4009318

SEAL,O RING 3011337

BLOCK FUEL & CONNECTOR HOSE,FLEXIBLE AK 6029 SS

HOSE,FLEXIBLE AK 6032 SS

HOSE,FLEXIBLEAK 6034 SS

HOSE,FLEXIBLE AK10021 SS

VALVE,CHECK 3874152

VALVE,CHECK 3874153

FLYWHEEL GEAR,FLYWHEEL RING 124507

PUMP SEA WATER PUMP,SEA WATER 3085649

HOSES

HOSES HOSE AK16030 SS

HOSE AK10070 MS

HOSE AK 6065 MS

HOSE AK16014 SS

HOSE AK16090 SS

HOSE AK16048 SS

CONNECTOR, PIPE 3872294

HOSE, ELBOW 3030514

HOSE, ELBOW 3030772

HOSE, HUMP 3030790

CLAMP T BOLT 140314

CLAMP T BOLT 140313

CLAMP T BOLT 125741

FUEL PUMP RECON RO3879477

ANTICIPATORY PARTS DIGITAL TACHOMETER 3232739

CRANKSHAFT,ENGINE 3648617

MANDATORY SPARES REQD FOR 12K ROUTINES DG - NT 495 MG (FOR 01 DG)

DG - NT 495 MG (FOR 01 DG) CYLINDER BLOCK LINER CYLINER BM98224

LOCK PLATE 3009213

CONN ROD & PISTON

CONN ROD & PISTON KIT PISTON & RING SET KIT4105239

BRG. CON ROD 10 U/S 203670

BOLT CON ROD 9195 3

NUT,HEAVY HEXAGON 69936

WASHER CON ROD 3025100

GASKET SETS

GASKET SETS UPPER ENGINE GASKET SET KITBM54940

LOWER ENGINE GASKET SET KITBM62427

COUNTER BALANCER

COUNTER BALANCER LOCK PLATE 127677

LOCK PLATE 127678

LOCK PLATE 136698

O' RING COUNTER BALANCER 70549

HSG RKR ARM HSG

HSG RKR ARM HSG ADJ SCREW 168306

PUSH ROD VALVE 3046418

PUSH ROD INJ 3046431

SCREW EXH MFG S 127

SCREW EXH MFG S 155

O' RING 3010157

GASKET 157551

LUB OIL COOLER

LUB OIL COOLER ELEMENT LUB OIL COOLER 110848

RETAINER COOLER 110827

O' RING L.O.COOLER 3019116

GASKET,OIL COOLER SUPPORT 3008017

GASKET,CONNECTION 68210

CYLINDER HEAD

CYLINDER HEAD VALVE EXHAUST 144911

VALVE INTAKE 150288

GUIDE VALVE STEM 66890

INSERT VALVE SEAT 69965

SLEEVE INJECTOR 8901 2

COLLET VALVE S 2037

INJECTOR

INJECTOR KIT INJECTOR REPAIR NT495 KIT3880780

SPRING,COMPRESSION 166009

BALL,CHECK 167157

CONNECTOR,FEMALE 70855

FUEL PUMP

FUEL PUMP KEY,SQUARE 68174

SHAFT,FUEL PUMP DRIVE 100192

BEARING,BALL S 1650

GASKET GOVERNOR SET KITBM68356

SCREEN,FILTER 146483

CAP,FUEL PUMP FILTER 157088

DRIVE TACHOMETER BM28848

HUB,JAW COUPLING 101918

SHAFT,TACHOMETER DRIVE 104087

DIAPHRAGM,FUL PUMP DAMPER 202897

VALVE,CHECK 4913272

SEAL,O RING 3034412

ELBOW,PLAIN ADAPTER S 1028

VALVE,SOLENDID 3240573

FUEL SYSTEM

FUEL SYSTEM MANIFOLD,FUEL BM30265

MANIFOLD,FUEL DRAIN BM31780

SLEEVE,WEAR 190397

SEAL KEY WAY 3008947

SLINGER 181236

VALVE,SOLENDID 3239599

SEAL,RECTANGULAR RING 154087

ADAPTER DOUBLE DRIVE 3247372

COOLING SYSTEM

COOLING SYSTEM THERMOSTAT 135675

SEAL,THERMOSTAT 186780

INHIBITOR CORROSION 2 LTR 3167216

RADIWASH_3LTR AX1013359

HOSES

HOSES HOSE 67185

CLAMP HOSE 43828 D

CLAMP HOSE 43828 B

CLAMP HOSE 43828 A

HOSE BYPASS FILTER AK 6045 SS

HOSE BYPASS FILTER AK 6065 SS

HOSE FUEL FILTER AK10031 SS

HOSE FUEL TANK AK10070 MS

HOSE PUMP RETURN AK 6065 MS

HOSE INJECTOR RETURN AK 8065 MS

HOSE AK10021 SS

FILTERS

FILTERS ELEMENT LUB OIL FILTER KIT3238204

ELEMENT FF KIT3238493

ELEMENT BYPASS KIT3879488

SEAL 'O' RING 3010937

ELEMENT,AIR CLEANER 4055575

ELEMENT,AIR CLEANER 4055576

INDICATOR,RESTRICTION 3872813

SEA WATER PUMP PUMP SEA WATER 3225879

WATER PUMP PUMP WATER 3166497

GASKET W.P. 9097

TURBOCHARGER

TURBOCHARGER TURBO REPAIR KIT 3545399

NUT,REGULAR HEXAGON 219138

HOSE,FLEXIBLE AK 6054 ST

HOSE,FLEXIBLE AK16013 46MC

HEAT EXCHANGER

HEAT EXCHANGER ZINC PLUG 68241

GASKET 137067

GASKET 137071

O' RING 137074

O' RING 137075

GASKET 137076

GASKET,COVER PLATE 2884937

CAP H.E. 500181

CLAMP HOSE 43828 E

BELT,V 3040349

BREATHER CRANKCASE

BREATHER CRANKCASE BREATHER,CRANKCASE 3873542

HOSE,HUMP 4056441

HOSE,HUMP 4056442

CLAMP,T BOLT 140332

CLAMP,T BOLT 149437

CAP, DUST 3225660

LUB OIL SYSTEM

LUB OIL SYSTEM COUPLING,PLAIN PIPE S 1059

ELBOW,MALE ADAPTER 68139

HOSE,FLEXIBLE AK 4160 MS

HARNESS,WIRING 3056356

SWITCH,PRESSURE 2897691

SWITCH,TEMPERATURE 4327021

SWITCH,PRESSURE 4359612

SWITCH,TEMPERATURE 4327022

HARNESS,WIRING 3056357

SWITCH,OVERSPEED 3231354

GAUGE,PRESSURE 500109

GAUGE,TEMPERATURE 500108 R

GAUGE,TEMPERATURE 4971772

HOURMETER 501151

CABLE,FLEXIBLE DRIVE 503473

AMMETER 502881

SWITCH,KEY 504975

ANTICIPATORY PARTS CAMSHAFT 3167235

ELEMENT HEAT EXCHANGER 194730

MANDATORY SPARES REQD FOR 6K ROUTINES DG - NT 495 MG (FOR 01 DG)

GASKET SETS UPPER ENGINE GASKET SET KITBM54941

HSG RKR ARM HSG ADJ SCREW 168306

O' RING 3010157

GASKET 157551

LUB OIL COOLER

LUB OIL COOLER RETAINER COOLER 110827

O' RING L.O.COOLER 3019116

GASKET,OIL COOLER SUPPORT 3008017

GASKET,CONNECTION 68210

INJECTOR

INJECTOR KIT INJECTOR REPAIR NT495 KIT3880780

SPRING,COMPRESSION 166009

BALL,CHECK 167157

CONNECTOR,FEMALE 70855

FUEL PUMP

FUEL PUMP KEY,SQUARE 68174

SHAFT,FUEL PUMP DRIVE 100192

BEARING,BALL S 1650

GASKET GOVERNOR SET KITBM68356

SCREEN,FILTER 146483

CAP,FUEL PUMP FILTER 157088

DRIVE TACHOMETER BM28848

HUB,JAW COUPLING 101918

SHAFT,TACHOMETER DRIVE 104087

DIAPHRAGM,FUL PUMP DAMPER

VALVE,CHECK 202897

SEAL,O RING 3034412

ELBOW,PLAIN ADAPTER S 1028

VALVE,SOLENDID 3240573

FUEL SYSTEM

FUEL SYSTEM MANIFOLD,FUEL BM30265

MANIFOLD,FUEL DRAIN BM31780

SLEEVE,WEAR 190397

SEAL KEY WAY 3008947

SLINGER 181236

VALVE,SOLENDID 3239599

SEAL,RECTANGULAR RING 154087

ADAPTER DOUBLE DRIVE 3247372

COOLING SYSTEM

COOLING SYSTEM THERMOSTAT 135675

SEAL,THERMOSTAT 186780

INHIBITOR CORROSION 2 LTR 3167216

RADIWASH_3LTR AX1013359

HOSES

HOSES HOSE 67185

CLAMP HOSE 43828 D

CLAMP HOSE 43828 B

CLAMP HOSE 43828 A

HOSE BYPASS FILTER AK 6045 SS

HOSE BYPASS FILTER AK 6065 SS

HOSE FUEL FILTER AK10031 SS

HOSE FUEL TANK AK10070 MS

HOSE PUMP RETURN AK 6065 MS

HOSE INJECTOR RETURN AK 8065 MS

HOSE AK10021 SS

FILTERS

FILTERS ELEMENT LUB OIL FILTER KIT3238204

ELEMENT FF KIT3238493

ELEMENT BYPASS KIT3879488

SEAL 'O' RING 3010937

ELEMENT,AIR CLEANER 4055575

ELEMENT,AIR CLEANER 4055576

INDICATOR,RESTRICTION 3872813

WATER PUMP

WATER PUMP PUMP WATER 3166497

GASKET W.P. 9097

TURBOCHARGER

TURBOCHARGER TURBO REPAIR KIT 3545399

NUT,REGULAR HEXAGON 219138

HOSE,FLEXIBLE AK 6054 ST

HOSE,FLEXIBLE AK16013 46MC

HEAT EXCHANGER

HEAT EXCHANGER ZINC PLUG 68241

GASKET 137067

GASKET 137071

O' RING 137074

O' RING 137075

GASKET 137076

GASKET,COVER PLATE 2884937

CAP H.E. 500181

CLAMP HOSE 43828 E

BELT,V 3040349

HOSE,HUMP 4056441

HOSE,HUMP 4056442

CLAMP,T BOLT 140332

CLAMP,T BOLT 149437

CAP, DUST 3225660

LUB OIL SYSTEM

LUB OIL SYSTEM COUPLING,PLAIN PIPE S 1059

ELBOW,MALE ADAPTER 68139

HOSE,FLEXIBLE AK 4160 MS

HARNESS,WIRING 3056356

SWITCH,PRESSURE 2897691

SWITCH,TEMPERATURE 4327021

SWITCH,PRESSURE 4359612

SWITCH,TEMPERATURE 4327022

HARNESS,WIRING 3056357

SWITCH,OVERSPEED 3231354

GAUGE,PRESSURE 500109

GAUGE,TEMPERATURE 500108 R

GAUGE,TEMPERATURE 4971772

HOURMETER 501151

CABLE,FLEXIBLE DRIVE 503473

AMMETER 502881

SWITCH,KEY 504975

MANDATORY SPARES REQD FOR SRP UPPER ASSEMBLY HSN CODE:5151652

MANDATORY SPARES REQD FOR SRP (FOR 02 UNITS) UPPER ASSEMBLY Breather- Filler Cap 6654736-A

O Ring 6652948-A

O Ring 6658170-A

O Ring 6658010-A

O Ring 6653650-A

O Ring 6651635-A

O Ring 6656696-A

UPPER GEARS HSN CODE:5150806

UPPER GEARS O Ring 6356696-A

O Ring 6352234-A

CLUTCH HSN CODE:5252549

CLUTCH CLUTCH Cone 8257032-A

Sleeve 545008001-A

Washer 5451779000-A

Instrument Spring 6580029-A

O Ring 6353640-A

O Ring 6354759-A

O Ring 6357890-A

O Ring 6354759-A

Retaining Ring for Bore 6255300-A

Retaining Ring for Shaft 6253110-A

Bushing 6138150-A

Needle bearing 6138160-A

Cyllinder bearing 6132327-A

Sleeeve 5451429000-A

locking nut 535004101-A

Four Point Bearing 6170058-A

Radial Seal 6342951-A

O Ring 6354350-A

O Ring 6355880-A

Hardener Washer 4740502-A

INTERMEDIATE PART HSN CODE:5251738

INTERMEDIATE PART Steel Wire 1946300-A/L500/

O Ring 6358182-A

O Ring 6358170-A

O Ring 6358110-A

O Ring 6358099-A

O Ring 6358090-A

O Ring 6358070-A

O Ring 6355320-A

O Ring 6351635-A

O Ring 6351960-A

Hardener Washer 4740505-A

Stop Screw 4274919-A

LOWER GEAR HSN CODE: 5151086

LOWER GEAR Counter Flange 53511554000-A

Distance Ring 5451552000-A

Propeller Shaft Seal 6375792-A

Sealing Sleave 5352948000-A

Radial Seal 6349625-A

O Ring 6358280-A

O Ring 6358240-A

O Ring 6357940-A

O Ring 6357060-A

O Ring 6356300-A

O Ring 6355880-A

Stop Screw 4274935-A

LOWER GEAR HSN CODE:5251113

LOWER GEAR O Ring 6357850-A

Spring 6581865-A

Spring Pin 4855815-A

Spring Pin 4858577-A

ROPE GUARD HSN CODE:5251096

ROPE GUARD Zinc Anode 8112000-A

MOUNTING OF NOZZLE HSN CODE: 5150736

MOUNTING OF NOZZLE Zinc Anode 8112167-A

HYDROLIC PIPING HSN CODE:8250670

HYDROLIC PIPING Filter elemnet 6659861-A

OIL TANK HSN CODE:8250669

OIL TANK Filter elemnet 6659858-A

CONSUMABLES

CONSUMABLES Hydrolic sealing material 3885501-A

HYDROLIC PUMP DRIVE HSN CODE:5251337

HYDROLIC PUMP DRIVE V Belt 6445314-A

CLUTCH HSN CODE:5252549

CLUTCH Sleeve 545008001-A

INTERMEDIATE PART HSN CODE:5251738

INTERMEDIATE PART Sealing Ring 5251734000-A

Sealing 6328084-A

AT CONSUMABLES HSN CODE:56470311001-A

AT CONSUMABLES Hydrolic sealing material 3885502-A

Hydrolic sealing material 3885834-A

Lubrication Grease 1000827-A

Marker 1001057-A

WINTECH ENGINEERING WORKS

SAGAR SHIP REPAIRERS AND MARINE SERVICES

MAYURI ENGINEERING WORKS

YEOMAN MARINE SERVICES PVT. LTD.

Bidder Name

Sadhav Offshore Engineering Company