Construction of Computer room at Higher Secondary School Rampora

Earth work in excavation in all kinds of soil by Manual/mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by site Engineer incld.cutting of trees, removal of tree stumps and dewatering of trenches during execution of work.

Supply and filling of stone soling in foundation trenches tightly hand packed with hand ramming, dressing ,watering incld. carriage of material from source to site of work complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) including all carriages.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work up to plinth level 1:3:6 (1Cement: 3 coarse sand: 6 grade stone aggregate 20mm nominal size) including all carriages.

Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . For mass concrete including all carriages.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level uoto floor five level including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand ) including all carriages.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Kiln seasoned and chemically treated hollock wood incld carriage.

Providing and fixing of 40X5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embeddings in cement concrete block 30X10X15 cm 1:3:6 mix ( 1 Cement : 3 Coarse sand :6 graded stone aggregate 20 mm nominal size) including all carriages.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incld carriage.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more, including all carriages.

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams,plinth beams, girders, bressumers and cantilevers including all carriages.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, including all carriages.

Providing and fixing of High Rib Profile Sheet Roofing incld verticla/Curved surface incld Polymer coated J or L Hooks, bolts and nuts 8 mm diameter with bitumen anf G.I limplet washers or with G.I Limplet washers filled with white lead , incld a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (Upto any Pitch in Horizontal /vertical or curved surface ) excluding the cost of Purlins , rafters 0.50 mm incld carriage.

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 incld carriage.

12mm Cement plaster of mix in 1 : 6 ( 1 cement : 6 coarse sand) including all carriages.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick incld carriage.

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications. Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm incld carriage.

Providing and fixing panelled or panelled and glazed shutters 35 mm thick for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second kail wood incld carriage.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 14587 incld carriage.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) including all carriages.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work incld carriage.

Providing and fixing of of Hardware Items of ISI Marked of standard Quality and make incld all fixtrures complete Job.Handles 125 mm incld carriage.

Providing and fixing of of Hardware Items of ISI Marked of standard Quality and make incld all fixtrures complete Job.Handles 100 mm incld carriage.

Providing and fixing of of Hardware Items of ISI Marked of standard Quality and make incld all fixtrures complete Job.T bolts 100 mm incld carriage.

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. Complete incld carriage.

Providing and fixing of of Hardware Items of ISI Marked of standard Quality and make incld all fixtrures complete Job.T bolts 150 mm incld carriage.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete, 40 mm thick with 20mm nominal size stone aggregate, including all carriages.

Providing heavy sheet float glass panes instead of ordinary glass panes 13.75 kg/Sqm in Doors Windows and clrestory Window Shutter (Area of opening for glass Panes excld portion inside shall be measure) incld carriage. 4 mm.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Electrification: (Lighting Point):One lighting point shall include wiring for lighting point in 1.5 sq mm pvc insulated Copper wire with 2.5 sq mm insulated multi stranded copper wire for lighting sub mains, 6 Amp one way switch 2 mm thik PVC conduit /Channel with bends,Junction boxes etc 6 Amp S Pole MCB, 10 Amp DP MCB , 2 way DB for housing MCB and Hylem Sheet with Wooden Boxes in Walls with acessories incld carriage.

Fan piont:One Fan piont shall include wiring for lighing pionts in 1.5 sq mm PVC insulated copper wire with 2.5 sq mm insulated multi stranded copper wire, 1200 mm ceiling fan 350 watt fan dimmer , 6 Amp one way switch 2 mm thick PVC conduit Channel with bends , Junctin boxes etc 6 Amp S Pole MCB,10 Amp DP MCB, 2 way DB for housing MCB and Hylem sheet with wooden boxes in walls with acessories.

Heating Point:One heating Piont shall include wiring for haeting pionts 2.5 sq mm PVC insulated Copper wire with 4.0 Sqmm insulated multi stranded copper wire for lighting sub mains, 16 Amp one way switch 2 mm tick PVC conduit /Channel with bends junction boxes etc. 6Amp S pole MCB,10 Amp DP MCB , 2 way DB for housing of MCB and Hylem Sheet with wooden boxesin walls with acessories incld all carraiges complete Job.