Repairment of the existing 03-Roomed single storey building with installation of truss work/ allied works at BHSS Lar

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6( 1 cement : 6 coarse sand) incl. Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level all complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick all complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) all complete.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) all complete.

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @2.20kg/10sqm all complete.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded all complete.

Providing and fixing of high Rib colour coated sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick incl. Ridges, hips, Valleys etc all complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm all complete.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge Size of tile 600x600 mm all complete.

Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-inCharge. 18 mm thick

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, fixing with butt hinges of required size with necessary screws, Including panelling with ornamental wood all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Kail wood

Providing and fixing 35mm thick panelled or panelled and glazed shutters for windows and clerestory windows fixing with butt hinges of required size with necessary screws, including 4.0mm thick glass panes with necessary beadings all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Imported Kail wood.

Providing and fixing of 35mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4mm in both directions with wire of dia 0.63mm for windows and CSW with hinges and screws of aluminum sections including ISI Marked M.S Pressed Butt Hings bright finished of required size with necessary screws. (Imported Kail Wood).

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour Two coats including Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter all complete

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing in position Flag stone Pavement Tiles of approved make, shade and colour 40mm thickness over a bed of cement sand motar 1:4mix (1 cement 4 sand) including grouting the joints with matching pigment inclusive concreting of edges & incl. all leads, lifts, carriage etc as per the directions of Engineer Incharge complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work including Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) all complete.

Proviidng and fixing of 4mm thick glass panes of approved brand and manufacture inclusing all necessary beading, nails and other fittings/fixtures complete.

Providing and Fixing of Alumunium Hardware fittings of standard/superior quality and make including all necessary fittings and fixtures (Heavy Duty) 100mm Tower Bolt.

Handles 100mm

Air Hooks

Tower Bolt 150mm

Handles 150mm

L-Drop

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate all complete.

Providing and fixing of electric points Lighting Point (one lightng point includes wiring of lighting point in 1.5sq.mm PVC insulated copper wite and 2.5mmsq.mm PVC insulated multistandard copper wire, 6 Amp one way switch, 6 Amp Spole MCB, 10Amp DP MCB, 2 way DB MCB and hylem sheet with 16/15 watt LED surface lights, including cost of channels as per requirement. One Point controlled by one 6 Amp switch. (upto 10 meters) including Placing and fixing in position 25mm PVC conduit pipes/ Channels with necessary bends and other fittings including Switches complete as per the directions of Incharge Engineer.

Heating point ( One heating point ) including wiring of lighting pointin 2.5Sq.mm PVC insulated copper wire and 4.00 Sq.mm PVC insulated Multistrand copper wire, 16 Amp one way switch, 10 Amp S pole MCB, Two way DB MCB and hylem sheet including placing and fixing in position deep junction of cast iron with network . Conduit pipes with necessary fittings in RCC work incl. switches all complete as per the directions of Incharge Engineer.

Providing and fixing of one fan point including wiring for lighting points in 1.5 Sq.mm PVC insulated copper wire and 2.5Sq.mm PVC in multistrand copper wire 1200mm ceiling fan Electronic fan dimmer, 6 Amp S pole MCB, 10 Amp DP MCB, 2 Way DB for Housing MCB or Lighting Circuits and hylem sheets including placing and fixing in position fan clamp boxes with MS Fan clamps connected with network conduit pipes with necessary fittings in RCC work incl. switches allcomplete as per the directions of Incharge Engineer.

Carriage of materials from approved source to site of work:- Stone aggregate for an average lead of 10Kms.

Sand for an average lead of 10Kms.

Bricks for an average lead of 45 Kms.