GENERAL-SITC OF UPS-Supply Installation Testing and commissioning of UPS and upgradation of panel board in Super Specialty Block at Medical College Thiruvananthapuram. -Electrical Fire Fighting Work

OD146657/2025-2026:Supply, installation, testing, and commissioning of automatic hanging type Modular Fire extinguisher charged with FK-5-1-12 gas, 10 kg capacity fitted with high pressure solenoid Valve 24V DC operated through Gas Release Panel at the event of detection of fire and 68 degree QBD nozzle, ceiling-mounted type, with a mild steel body not less than 2mm and pressure gauge & pressure switch. The extinguisher must be suitable for B and C classes of fire and be a refillable device along with all necessary accessories. This configuration is designed for fire protection in the battery room. (Make: KANEX/AEW)

OD369866/2025-2026:Supply & installation of Modullar type Clean agent Fire Extinguisher 5Kgs. Capacity ceiling mounted suitable for below ceiling built in 1 piece with body and bottom. Mild Steel Body with pressure gauge, refillable device and safety release device, Brass valve suitable for B and C Classes of Fire complete with Charge of HFC Blend A/FK-5-1-12 gas. The Extinguisher shall have pressure gauge for indicating inside pressure with opening and closing lever of squeeze grip type with tamper proof seal. The Extinguisher as per IS:15683-2006

OD146656/2025-2026:Supply & installation of Gas release panel having Battery backup with built in charging and LCD display and Gas Inhibit and Instant release facility Manual Gas Release with or without timer. Actuator pressure low sensing facility (Make: AGNI/RAVEL)

OD146652/2025-2026:Supply& installation of Abort switch to manually abort the Gas release.( MAKE HONEYWELL)

OD146651/2025-2026:Supply & installation of Manual release switch to manually activate the Gas release.(MAKE HONEYWELL)

17.1.6:FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

17.5.2:CABLING & WIRINGSupplying & laying of 2x1.5 sq mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

17.1.1:FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning of heat detector operating at 54ºC / 57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required.

17.1.2:FIRE DETECTION AND ALARM SYSTEM (CONVENTIONAL)Supplying, installation, testing & commissioning of smoke detector with built-in LED and mounting base complete with all connections etc. as required.