REPAIR / REPLACEMENT OF UNSV LT UG CABLE AND OTHER CONNECTED ACCESSORIES IN UNIT AREA AND MARRIED ACCN AT MIL STN BHUJ UNDER GE (A) BHUJ

Amount

Excavation in trenches in soft / loose soil not exceeting 1.5 Mtr wide and not exceding 1.5 Mtr in depth and getting out for taking out / laying of cables, erection of poles / strut / stays etc and not exceeding 10 sqm on plan complete all as specified and directed.

Returning, filling in the soft / loose soil including spreading, levelling, watering and ramming in layers not exc. 25 cms complete all as specified and directed.

Removing excavated material (soft / loose soil) not exceeding 50 Mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for sand cushioning in cable trenches over & under the cables, with river washed coarse sand, as per standard practice with proper compaction complete all as specified and directed. (Punned thickness 18 cm shall be considered for payment as per para 19.75 of SSR Part-I).

Supply and fix precast concrete cable covers class LV type 1, flat size 250 x 150 x 40 mm M-20 grade concrete for cable protection complete all as specified and directed.

Disconnecting, taking out, removing u/g cable and PCC cable covers and Supply and fix and jointing and connecting XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 Volts grade of the following cross sectional area 10 Sqmm 2 Core complete all as specified and directed. (Note: Excavation, earth work, sand coushioning, precast cable cover etc shall be measured and paid for separately under appropriate items of Sch 'A').

All as per Srl item No. 6 here - in - before but size 16 Sqmm 4 core

All as per Srl item No. 6 here - in - before but size 25 Sqmm 3.5 core

All as per Srl item No. 6 here - in - before but size 35 Sqmm 3.5 core

All as per Srl item No. 6 here - in - before but size 50 Sqmm 3.5 core

All as per Srl item No. 6 here - in - before but size 70 Sqmm 3.5 core

All as per Srl item No. 6 here - in - before but size 95 Sqmm 3.5 core

All as per Srl item No. 6 here - in - before but size 120 Sqmm 3.5 core

Dismantlling old ACSR conductor of any size from the poles of any size and type and Supplying, fixing, jointing, connecting and testing ACSR conductor of any size, any type as per the existing size and type and stringing the same properly on the insulators and binding with the aluminium wire, connectors, jumpers etc on pole and properly stretched complete all as specified and directed. Note :- 3 % sag between two adjacent poles shall be added at the time of measurment and payment to the contractor of this item.complete all as specified and directed.

Supplying, fixing, connecting & testing 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner shaething of PVC tape and overall PVC sheathed in service connections suspended be insulating hangers not more than 1 mtr apart including 4 mm suspension wire, one twin core flat cable of size 6 Sqmm complete all as specified and as directed.

Supplying, fixing, connecting & testing 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner shaething of PVC tape and overall PVC sheathed flat twin core cable of size 6 Sqmm complete all as specified and as directed.

Supplying, fixing, connecting & testing 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner shaething of PVC tape and overall PVC sheathed flat twin core cable of size 10 Sqmm complete all as specified and as directed.

Dismantling of insulator any type and size and removing from site complete all as directed by the Eng-in-charge.

S & F in repair and replacement MCCB Thermal Magnetic release 4 pole 63 Amps 16 KA fixed including necessary lugs of any size and capacity complete all as specified and directed.

S & F in repair and replacement MCCB Thermal Magnetic release 4 pole 100 Amps 25 KA fixed including necessary lugs of any size and capacity complete all as specified and directed.

S & F in repair and replacement MCCB Thermal Magnetic release 4 pole 160 Amps 25 KA fixed including necessary lugs of any size and capacity complete all as specified and directed.

S & F in repair and replacement MCCB Thermal Magnetic release 4 pole 200 Amps 25 KA fixed including necessary lugs of any size and capacity complete all as specified and directed.

S & F in repair and replacement MCCB Thermal Magnetic release 4 pole 250 Amps 25 KA fixed including necessary lugs of any size and capacity complete all as specified and directed.

S & F in repair and replacement MCCB Thermal Magnetic release 4 pole 400 Amps 35 KA fixed including necessary lugs of any size and capacity complete all as specified and directed.

S & F in replacement of Change over Switch On load type 4 Pole 63 Amps in Sheet Metal Enclosure including necessary lugs of any size and capacity Complete all as specified and as directed.

S & F in replacement of Change over Switch On load type 4 Pole 100 Amps in Sheet Metal Enclosure including necessary lugs of any size and capacity Complete all as specified and as directed.

S & F in replacement of Change over Switch Off load type 4 Pole 200 Amps in Sheet Metal Enclosure including necessary lugs of any size and capacity Complete all as specified and as directed.

S & F PVC insulated spacers, 12mm dia flexible type suitable for making/ turning to any shapea and size and suitable for 2 conductor runs including disconnecting, dismantling and taking down exisitng unserviceable spacers of any description and in any position from the LT electric overhead lines of any height complete all as specified and directed. Note: The specer shall be of best quality and as per the sample kept in GE Office.

S & F PVC insulated spacers, 12mm dia flexible type suitable for making/ turning to any shapea and size and suitable for 4 conductor runs including disconnecting, dismantling and taking down exisitng unserviceable spacers of any description and in any position from the LT electric overhead lines of any height complete all as specified and directed. Note: The specer shall be of best quality and as per the sample kept in GE Office.

M&L for Unbinding of the ACSR conductor from the insulator on pole, restringing the conductors, tightening LT over head line, connector, jumper, screw nuts, bolts and binding to the insulators using required size aluminium binding wire complete all as specified and directed.

M&L for Unbinding of the ACSR conductor from the insulator on pole, restringing the conductors, tightening LT over head line, connector, jumper, screw nuts, bolts and binding to the insulators using required size aluminium binding wire complete all as specified and directed.

S&F Contactor for street light timer of rating 40 Amps (AC-1), 4 pole, 220 Volts, CN 325F complete all as specified and directed.

S&F Timer for street light timer of rating 40 Amps (AC-1), 4 pole, 220 Volts, CN 325F complete all as specified and directed.

M & L for preparation of LT UG cable near LT Panel and Transformer by insulating tape for the three phase and neutral colour code wise complete all as specified and as directed.

Material and labour in replacement for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to GI earth strip 32 mm x 6mm (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt all around earth plate, test point of phosphorous bronze / gun metal of size 75 mmx 75 mm x25 mm, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover reinforced with 8mm dia TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 15 mm dia with funnel and wire mesh, and 40 mm dia GI medium grade earth lead protection pipe, complete all as specified and directed. NOTE : Earth strip and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth strip/protection pipe etc.

Trimming / cutting of the tree branches / bushes which falls within a clear distance of 3 metre from all sides from the HT / LT over head conductor & within line of conductors, and shifting waste to nearby waste depot & cleaning the area complete all as specified and directed.

S&F pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two GI washers and one iron nut, 100mm height, 65mm dia for 1100 Volts grade, fixed on LT lines poles etc complete all as specified and as directed

S &F for Shackle Type, 75mm height and 90mm dia, Porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps 31mm x 3mm, washers, insulator bolts 12mm dia with suitable washers and nuts for working pressure 1100 Volts grade, fixed on LT lines poles etc complete all as specified and as directed.

Dismantling of old unserviceable stay assembly and Supply and Fixing Stay Assembly complete with all accessories as shwon in electrical Plate No. 01 of SSR Part-I, 2009 using stay rod 16mm dia including Stay wire complete all as specified and as directed. Note: Excavation, earth work, foundation concrete, loop insulator, stay clamps for the new stay shall be measured and paid separately under respective item of this schedule.

Material and labour for cross arms, bracings, supports clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of two coat of aluminium paint over a coat of red oxide primer including preparing the surface all as specified and as directed.

S&F in repair for Aluminium Terminals suitable for XLPE UG Cable of size 25 Sqmm complete all as specified and as directed.

S&F in repair for Aluminium Terminals suitable for XLPE UG Cable of size 35 Sqmm complete all as specified and as directed.

S&F in repair for Aluminium Terminals suitable for XLPE UG Cable of size 50 Sqmm complete all as specified and as directed.

S&F in repair for Aluminium Terminals suitable for XLPE UG Cable of size 70 Sqmm complete all as specified and as directed.

S&F in repair for Aluminium Terminals suitable for XLPE UG Cable of size 95 Sqmm complete all as specified and as directed.

S&F in repair for Aluminium Terminals suitable for XLPE UG Cable of size 120 Sqmm complete all as specified and as directed.

S&F in repair for Aluminium Terminals suitable for XLPE UG Cable of size 150 Sqmm complete all as specified and as directed.

S&F in repair for Digital panel mounted Voltmeter of Input:100-500V L-L (Programmable), 14mm LED Display, 3Phase, 3W/4W Network, Accuracy Class:1.0, 4 Digit, flush mounted case of suiatble sizes fixed in the existing LT Panel Board with internal wiring connections complete all as specified and directed.

S&F in repair for Digital panel mounted Ammeter of Input:100 mA (Primary-63/125/250 Programmable), 14mm LED Display, 3Phase, 3W/4W Network, Accuracy Class:0.5, 4 Digit, flush mounted case of suiatble sizes fixed in the existing LT Panel Board with internal wiring connections complete all as specified and directed.

S & F in repair LED indicator lamps for Phase indication for the existing LT panel baord with internal wiring connections complete all as specified and as directed.

M&L for repair of the existing broken LT panel board door for proper welding and fixed with suitable size hinges including painting to the welding postion as per the existing specification and colour and making good the panel board complete all as specified and as directed.

S&F GI Pipe 40mm bore light grade ISI mark conforming to IS 1239 with all fittings for passing of cables fixed to pole / wall / laid under floor or roads including all fixing accessories complete all as specified and directed . (Note : Excavation, earthwork shall be measured and paid seperately)

S&F GI Pipe 50mm bore light grade ISI mark conforming to IS 1239 with all fittings for passing of cables fixed to pole / wall / laid under floor or roads including all fixing accessories complete all as specified and directed . (Note : Excavation, earthwork shall be measured and paid seperately)

S&F GI Pipe 80mm bore light grade ISI mark conforming to IS 1239 with all fittings for passing of cables fixed to pole / wall / laid under floor or roads including all fixing accessories complete all as specified and directed . (Note : Excavation, earthwork shall be measured and paid seperately)

M&L Cable jointing kit for 1100 Volts (Earthed) grade cable for outdoor straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 16 Sqmm including taking out the old existing jointing kit complete all as specified and as directed

M&L Cable jointing kit for 1100 Volts (Earthed) grade cable for outdoor straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25 to 50 Sqmm including taking out the old existing jointing kit complete all as specified and as directed

M&L Cable jointing kit for 1100 Volts (Earthed) grade cable for outdoor straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 to 120 Sqmm including taking out the old existing jointing kit complete all as specified and as directed Note :- The retreived materials have been mentioned in the Sch of credit in the tender documents in pdf form. The amount of Sch of credit will be deducted offline from the amount of BOQ at the time of acceptance.

SHOBHIT BUILDERS

M/s Bombay Novelty Stores

M/s Pal Builders

MUKUL ENGINEERING

Ashok Electric and Electronics