SPECIAL REPAIR TO BLDG NO P-35 5075 COY ASC COMP AND P-45 (23 JAT) AND MINOR WORKS AT MIL STN BHUJ UNDER GE (ARMY) BHUJ

Amount

Taking down cement plaster of any description and in any position of brick or stone wall/concrete surfaces on walls ,ceiling etc including raking out joints ,hacking for key scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed

M&L for special treatment of sunken portion of WCs and Bath room as per following stages: Note: Flat Plan area shall be measured Stage 1 :- Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc . Stage 2:- Providing 10mm thick plaster in CM 1:3 with chemical of Dr. Fixit Pidicrete URP or plaster seal of STP Ltd Stage 3:- Applying Dr Fixit Primseal primer or STP Ltd (and allow to dry for 8 hours) under touch dry condition Stage 4:- Applying two coats of water proofing decorative elastomeric coating system of Dr Fixit Raincoats with DFT 100 Micron or shalicry 215 of STP(The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per manufactutrer instruction Stage 5:- Making holes in wall and fixing 600mm long 40mm dia GI spout for draining the surplus water if any.

M&L for roof treatment with APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid over tack coat of industrial bitumin 85/25 @ 1.20 kg / sqm incl cleaning surface and applying two coats of aluminium paint on roof or vertical surfaces complete all as specified and directed.

M&L Rendering 10 mm thick of CM 1:4 on concrete roof surfaces is to be finished even and smooth without using extra cement with mixing water proofing compound @3% by weight. complete all as directed.

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) mixed with WPC finished even and smooth etc complete all as specified and directed.(Note:- WPC shall be measured and paid seperately.)

M&L Providing and applying cement base plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean and applying external wall care putty in two layer 1mm thick and making surface even and smooth to receive external emulsion and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as Specified and directed.

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or conrete surfaces/stone masonary and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls applying cement base plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth to receive primer and applying one coat primer & two coats distemper oil emulsion , white or tinted complete all as specified and directed.

Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean including filling depessions and applying cement base plaster of paris putty of 1 mm thickness surface to prepare the surface even and smooth to receive primer and applying one coat primer & two coats distemper oil emulsion , white or tinted complete all as specified and directed.

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of old ceiling surface and apply one coat of white wash

Preparation of old painted surface of wood and wood based material any description and in any position over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted surface of steel and iron surface of any description and in any position over 10 cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and directed. by Engr-in-Charge.

Supply only water proofing compound (WPC- ISI Mark)

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) remoiving serviceable tiles to store and rubbish off the premices all as directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L for ceramic tiles, joint free, coloured tiles 7mm to 8 mm mm thick as in skirting fixed over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement lurry and pointed in white or coloured cement to match with tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L for glazed ceramic tiles, coloured tiles, 450mm x 300mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar

M&L Granite slab work 20mm thick in floors steps, cooking platforms and like including pointing in white cement with admixture of pigment to match with granite shade over & including screed bed 15mm thick in CM 1:6 including cutting recess opening for the sink portion and embedding complete all as specified and directed by Engineer-in-Charge. (Note : No deduction shall be made for opening of sink portion and rate of cutting of hole for wash hand basin and setting the washhand basin in position shall deemed to be included in the quoted rate)

M&L Granite (of any type) tiles 20mm thick machine cut,in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over 10mm thick backing layer in cement mortar 1:4 complete all as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and othersimilar situations

Taking down existing chowkats or frames of any description and in any position not exceeding 1.5 sqm each with shutter (w/o taking off shutter from the frames) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Taking down shutters of any description and in any position exceeding 1 sqm & not exceeding 2 sqm each complete all as specified and directed.

M & L for Powder coated (minimum thickness of powder coating 50 mm micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium sliding window with aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately.

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window & Ventilater shutters top hung type aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately.

M & L for powder coated aluminum grill of design No DG-104, 7.5mm thick sections of decogrill or of equivalent approved make with 1 mm thick 'F' sections of suitable size complete all as specified and directed by Engg in Charge.

S & F Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average with of aperture 1.40mm (weight not less than 600 gms /sqm )and fixed with aluminium wire stples/iron and wooden beads etc complete all as specified and directed

S & F in repair Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average with of aperture 1.40mm (weight not less than 600 gms /sqm )and fixed with aluminium wire stples/iron and wooden beads etc complete all as specified and directed

S & F 3mm thick figured glass ,pin head type and glazing with oil putty in square n.exc 0.5 Sqm in each pane etc all as specified.

S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F framed work as in doors /coolar stand /gate of angle section of confirming to Fe 410-W with brackets of steels or other covering doors to be prepared for hanging with and including hinges or steel hanging doors and fastening and fixing etc including onecoat of redoxide paint complete all as specified and directed.

S&F factory made 2nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

M&L for preparation of new wooden surfaces of any description over 10 cm width / girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F butt Hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, 100 mm size complete all as specified.

S & F in mild steel butt hinges medium weight 100mm long and fixed with angle iron door frame by means of welding etc complete all as specified and directed.

S&F aluminum handles fabricated type, anodized of 150 mm size complete all as specified and directed.

S&F 150 mm long aluminium anodised , barrel tower bolt of extruded section and fixed all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width / girth & applying 2 coat of synthetic enamel paint complete all as specified and directed.

Taking up or down existing unserviceable upvc/ mild steel water tubing and connections 15mm dia, any grade, of any description or in any position including fittings complete all as specified and directed

Taking up or down existing unserviceable upvc/ mild steel water tubing and connections 20mm dia, any grade, of any description or in any position including fittings complete all as specified and directed

Cutting chases, pinning in, making good to facings where required in stone concrete block wall or slab walls and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etcand making good, cutting not exc 10 cm girth

Supplying and laying 20 mm outer dia Unplasticised PVC SDR 13.5 and plain CPVC SDR 11 fittings pipes fixed complete to walls, ceilings or in floors etc., any type of pipe etc in required length complete all as specified and directed

Supplying and laying 25 mm outer dia Unplasticised PVC SDR 13.5 and plain CPVC SDR 11 fittings pipes fixed complete to walls, ceilings or in floors etc., any type of pipe etc in required length complete all as specified and directed

S&F bib tap, cast copper alloy, screwed down high pressure with crutch of butter fly handle fancy type CP for 15 mm bore dia complete all as specified and directed.

S&F for Swivel shower rose size 125 mm of PTMT , any colour , for fixing with 15 mm dia pipe ,( minium weight 40 gm. ) with and including Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour (Min wt 40gms) , fixed in repairs , complete all as specified and directed .

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm

S&F vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection with cast iron P trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete with provision of lime concrete bedding including taking down/ Dismantaling existing unserviceable WC of any discription and in any position & fixing new WC in repair and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

S & F in repair vitreous china Corner wash basin round,white angle back , size 400mmx400mmx125mm with and including Waste fittings, brass, chromium plated for basins with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed with and including Supplying and fixing cast copper alloy chromium plated, fancy type, pillar tap, 15mm bore, scrwed down high pressure with or without lettereed hot or cold with long shanks, screwed for iron pipe complete all as specified and directed.

S&F in reair PVC valve-less, syphonic action type, flushing cistern, low level, 9 litre capacity (ISI marked) white with inlet, ball valve, float and handle including brackets complete all as specified and directed.

Dismantling existing water tank Exc 250 and N Exc 500 ltr capacity all as specified and directed by EIC.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 litres capacity, with and including all fittings and fixtures complete all as specified and directed.

S&F Stop valves, cast copper alloy, ISI marked ,screwed down high pressure with crutch of butter fly handle, fancy type , chromium plated,with long shank and cup (concealed type) screwed both ends for iron pipes or for union , for 15 mm bore , complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on wall/tranches complete all as specified and directed

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on wall/tranches complete all as specified and directed

S&F PVC (SWR) bends, 75 mm bore, any radius with access door complete all as specified and directed.

S&F PVC (SWR) bends, 110 mm bore, any radius with access door complete all as specified and directed.

S&F PVC (SWR) Junction, single, (single T) equal or unequal, 110 mm bore,with access door complete all as specified and directed.

M&L for PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed.

S/F in repair 75 mm bore PVC (SWR) floor trap plain with grating incl jointing with solvent cement

S/F in repair PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and as directed.

S&F sinks matt finish anti scratch stainless steel without draining board made out of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm in repairs complete all as specified and directed fixed in repair.

Demolition of reinforced cement concrete of any description and in any position in beams, colums chajjas and similiar items complete all as specified and directed.

M&L for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate) as in sub base/Sunken, in trenches ,floor, finished even and rough/smooth complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess its, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming excavated soil in layers n exc 25 cm thick back in trenches all as specified and directed at site.

Dismantling of 150mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches from I.C. upto first man hole complete all as specified and directed.

M&L Concrete bed to 150mm dia drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in Cement concrete 1:3:6 Type C2

Drilling holes for fixing bolts,pipes, etc exc.25 mm but n. exc 60 mm dia in masonary and making good to existing surface

M&L Providing, cement concrete Type B0 1:2:4 (12.5mm graded aggregate) as in curb stones , rounded or chamfered on edges.

M&L Pre-cast cement concrete block Type C1 1:3:6 (20mm graded aggregate) masonary with solid blocks, exc 10cm in width and setting in mortar,complete set in cement mortar 1:6.

M&L Pre-cast cement concrete Type B1 1:2:4 (20mm graded aggregate) in cover slabs (for manholes etc ,chullah hoods, chajjas etc.

M & L for TMT steel bars 8mm dia and above over cut to length bent to shape required including crancking bending spirally for hooping for column hooking ends and mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S&F in repairs brass chromium plated tubular towel rail, 20 mm dia D type 60 cm long between flanges all as directed.

M & L in repair for Curtain rod, powder coated aluminum alloy of 25mm dia pipe decorative finish with and including supply and fixing powder coated decorated type brackets, stops, rollers etc. fixed on walls with brass screws with PVC rawl plugs as in curtain rods complete all as specified and directed.

S&F in repairs stainless steel plate rack, made out of stainless steel of size 31 inch X30 inch X10 inch .( Make Prayag Cat No P-346 or equivalent)

S&F Kitchen Cabinet 18 mm thick prelaminated PVC Celuka New matalic ply prelaminated both side with decorative choice lamination fixed with screws to PVC celuka ply works all as directed and as per manufactures instructions. (Including all fittings and fixtures i.e Handle 125 mm size, Hinges (Heavy) 75 mm, Lock and screw and wall plug.

- ditto- but 12 mm thick new metalic cheluka plywood.

Material and labour Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate),75 mm thick, as in sub base for floor, finished even and rough complete all as specified and directed.

M & L for factory made precast machine pressed kerd stones of PCC grade M-15 design mix and of shape and size of 300mmx 400mmx100mm and as directed, set jointed and pointed cement and sand mortar 1:4 fixed in repairs complete all as specified and directed.

M&L sand filling under floors or in foundation including watering and consolidation

M&L Spreading and levelling in layers n exc. 25 cm thick complete all as specified and directed.

M&L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

M & L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

M & L Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall

M & L Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

M&L non skid Coloured ceramic tiles 300mm X 300mm X 7mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over & including screed 15mm thick in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M&L for glazed ceramic tiles, joint free, coloured tiles, 200mm x 300mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:6) complete all as specified and directed.

M&L for 15 mm rendering in two layers with 10 mm with CM 1:6 & 5 mm thick with CM (1:4) with using water proffing compound on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified (Note: WPC paid seprately.)

M & L rendering 5mm thick in cement mortar 1:3 on fair faces of concrete surfaces as in ceiling.

Preparation of newly plastered surfaces of external wall and applying two coat of cement base paint over one coat of cement primer in cxamouflage pattern ect all as spd.

Preparation of newly plastered surfaces of wall and applying three coat white wash.

M & L for RCC type M-30mix using 20mm graded aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.

M & L for RCC type M-30mix using 20mm graded aggregates as in lintel over 1.5 m span, complete all as specified and as directed by the Engineer-in-Charge.

M & L for RCC type M-30 mix using 20mm graded aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concretecomplete all as specified and as directed by the Engineer-in-Charge.

M & L for RCC type M-30 mix using 20mm graded aggregates as in column, complete all as specified and as directed by the Engineer-in-Charge.

M & L TMT steel bard Gde 500 D, 6 mm to 8 mm dia as in reinforcement cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M & L TMT steel bard Gde 500 D, 5 mm dia and over upto including 10 mm dia as in stirupps, spacers and binders reinforcement cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M & L Formwork for rought finished surface of concrete and sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work;complete all as specified.

M & L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed

M & L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed

M&L for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate),100 mm thick, as in sub base for floor, finished even and rough complete all as specified and directed.

S&F steel ventilators with top hung glazed shutter including projecting type hinges with stel handle and steel peg stays complete with glazing bars, dovetailed or welded and including mild steel grills/ guard bars of approved design or pattern made of 12mm dia square bar and directed by Engr-in-charge incl one shop coat of redoxide primer.

M&l preparation of new steel suraface of any description over 10 cm width or girth not otherwise described and apply two coats of synthetic enamel paint complete all as specified and directed.

S&F figured glass 3 mm thick pin headed type and glazing withoil putty not exc0.5 mm in each pane.

S & F Framed work as in doors of angle section and in ladders with gusset plates rails, braces etc. complete drilled for fixing of other coverings doors etc to be prepared for sliding with and including either hooks and hinges, etc completed as specified size of frame conforming to Fe 410-W(Gde E-250) quality -A and filled with PCC 1:3:6 type C-0 making good to disturbed surface all as specified.

S & f Plain framed, panelled shutter 35mm thick (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated including providing two coats of synthetic enamel paint alround over and including one coat of pink pimer complete all as specified and directed

S & F stainless steel butt Hinges, medium weight, , 100 mm size complete all as specified.

Supply and fixing for ISI marked 300mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and as directed by the Engineer-in-Charge.

S&F Stop valves, ISI marked , cast copper alloy, screwed down high pressure for 15 mm bore dia tubing pipe, high pressure, with crutch butter fly handle complete all as specified

S&F UPVC ball valve with operating handle (stop valve) of size 1" (25mm dia) both ends threaded complete suitable for fitting with ASTMD-1785, Sch 40 UPVC pipes all as specified and directed

Supply & fix in any length UPVC pipe manufactureed as per ASTM-D -1785 both ends threaded as per IS-559, Schedule -40 complete with fitting,fixed to wall/ceiling/floors in required length complete all as specified and directed by Engineer-in-Charge of the following inner bore 15mm.

Supply & fix in any length UPVC pipe manufactureed as per ASTM-D -1785 both ends threaded as per IS-559, Schedule -40 complete with fitting,fixed to wall/ceiling/floors in required length complete all as specified and directed by Engineer-in-Charge of the following inner bore 25mm. M

S&F Bib taps , cast copper alloy screwed down high pressure with crutch or butter fly handle fancy type long body CP for 15mm dia bore GI Pipe or for brass ferrule and fixed complete all as specified .

Supply only PVC connections 15mm size with PTMT nuts of length 450mm Complete as as specified and directed.

S&F Vitreous China urinals, bowl type urinal flat back, size of 465 x 355 x 265 mm white with grating and union for discharge pipe ,complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe etc, complete all as specified and as directed..

S&F vitreous china wash basin white flat back size 580x450mm including bracket, including down pipe ,PVC connection pipe 15mm bore, and 32mm CP waste coupling incl pillar tap cmpolete all as spcified and as directed by Engr in charge

S&F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, hoisted and fixed in position complete all as specified and directed.

M&L for 15 mm thick screed bed with CM (1:4) with using water proffing compound on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified (Note: WPC paid seprately.)

M&L for concrete bed to drain pipes in cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) including packing under, and hauching against the side of the pipes after they are laid tested for pipes of 150mm dia complete all as specified and directed

S&F jointing and testing for reinforced concrete drain pipes, 150mm bore, class NP-2, laid and jointed with collar in CM (1:1) complete all as directed by Engr-in-Charge

M & L for water proofing treatment to roof by applying one coat of bituminous / polymrised primer confirming to IS 3384 @ 0.30 ltr /sqm and laying Actetic Polypropylene (APP) modified membrane pre-fabricated , reinforced with non woven polyester , of 3.50 kg/sqm (minimum) , 3mm thick minimum with minimum 75mm side overlaps and minimum 100mm end overlaps and applying bituminous aluminium paint over APP membrane @ 100 gram/sqm on roof or vertical surfaces complete all as specified and directed.

Surface excavation nexc 30 cm deep and averaging 15 cm deep and getting out in soft /loose soil

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 mabove the starting point

S & F of Steel work in tubular trusses/purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M & L for Cement concrete in foundations, filling and mass concrete using type D2 1:4:8 (40 mm gradaed aggregate).

M&L for Cement concrete type B-1,1:2:4 (20mm graded aggregate)75 mm thick.

M&L for fixing Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types

M&L for Non skid ceramic tile 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screeed bed in CM 1:4.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil.

M & L for Cement concrete in foundations, filling and mass concrete using type B2 1:2:4 (40 mm gradaed aggregate).

M&L for preparation of newly untreated surfaces of steel and painting with two coats of synthetic enamel paint over a coat of red oxide of any description, over 10cm in width or girth,not otherwise described all as specified by Engr-In-Charge.

S & F of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for PCC (1:3:6) type C2, (using 40mm graded stone aggregate) as in plinth protection, 75 mm thick, finishing the surface even and smooth w/o using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and directed.

Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC conduit pipe of adequate size concealed type with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with modular type white plate with suitable brass screws and cup washers

One light/buzzer point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp point on the (same board) with other switches.

One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch.

All as per item No. 152 here-in-before but with 2.5sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

Supply and fix modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

Supply and fix modular fan regulator 120 W 2 module complete all as specified and directed by Accepting officer

Supply and fix modular bell switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

Supply and fix modular white cover plate with frame, 2 module complete all as specified and directed by Engr-in-charge

Supply and fix modular white cover plate with frame, 3 module complete all as specified and directed by Engr-in-charge

Supply and fix modular white cover plate with frame, 4 module complete all as specified and directed by Engr-in-charge

Supply and fix modular white cover plate with frame, 6 module complete all as specified and directed by Engr-in-charge

Supply and fix modular white cover plate with frame, 8 module complete all as specified and directed by Engr-in-charge

S & F in replacement elegantly industrial general purpose box type luminaire, 1x20 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with spring loaded rotor type lamp holders, connected block with and including 01 No LED lamp 20 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including three core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed.

S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed.

S&F lamp holder PVC / Polycarbonate type with cord grip cap suitable for LED lamp fitting complete all as specified and directed by Engr-in-charge

Taking down carefully MCBs, Metal clad plug, distribution boards/main switches of any type and size and S & F sheet metal enclosure powder painted for vertical type MCB DB TPN 04 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed

Taking down carefully MCBs, Metal clad plug, distribution boards/main switches of any type and size and S & F sheet metal enclosure powder painted for MCB DB SPN 08 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed

Supply and fixing MCB TPN, 63 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

Supply and fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed

S & F buzzer, ding dong AC 230 Volt single pole complete as specified.

Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces all as specified and as directed.

M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 4 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

Supply and fix UPVC pipe 50mm dia SCH-40 complete with sockets, fittings, elbows complete all as specified and directed.

Supply and lay pipe galvanized, "Medium class", including fittings 25 mm (1.0") dia complete all as specified and directed

Supply and fix PP-R Gate valves (brass insert) as per requirement of the site of dia 50 mm complete all as specified and directed

Supply and fix PPR Gate valves (brass insert) of 25 mm bore including cutting pipe complete all as specified and directed

SHREE BHANU ENTERPRISE

zotabrothers

Abhishek Enterprises