Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹2.8 LAdmitted-Finance VILL P O DUTTNAGAR TEHSIL RAMPUR DISTT SHIMLA H P | RAMPUR | SHIMLA | HIMACHAL PRADESH | -31.50% | ₹2.8 L | L1 | Admitted-Finance |
| 2 | L2₹3.0 L+₹19,592.71 (7.01%)Admitted-Finance GROUND FLOOR THAKUR COMPLEX BASANTPUR | BASANTPUR | SHIMLA | HIMACHAL PRADESH | 171018 | -26.70% | ₹3.0 L+₹19,592.71 (7.01%) | L2 | Admitted-Finance |
| 3 | L3₹3.1 L+₹34,695.43 (12.4%)Admitted-Finance | -23.00% | ₹3.1 L+₹34,695.43 (12.4%) | L3 | Admitted-Finance |
| 4 | L4₹3.2 L+₹41,226.33 (14.7%)Admitted-Finance BBMB SUNDERNAGAR HIMACHAL PRADESH | SHIMLA | HIMACHAL PRADESH | 172101 | -21.40% | ₹3.2 L+₹41,226.33 (14.7%) | L4 | Admitted-Finance |
| 5 | L5₹3.2 L+₹42,450.87 (15.2%)Admitted-Finance VILLAGE DHAR P O DASHERA TEH BALH REWALSAR DISTT MANDI HP 175036 | REWALSAR | MANDI | HIMACHAL PRADESH | 175036 | -21.10% | ₹3.2 L+₹42,450.87 (15.2%) | L5 | Admitted-Finance |
Tender Value
₹4.1 L
EMD Value
₹4,082
Closing Date
18 Sept 2026, 10:30 amClosed
SR EXECUTIVE ENGINEER CIVIL
SR EXECUTIVE ENGINEER CIVIL 0/0 Chief Engineer Gen. HPSEBL, Sundernagar
Dismantaling, Replacement Toilet bath room door, providing oil bound distempering, painting etc. complete in EB IV/10, Dismantaling,Replacement Toilet bath room floor , oil bound distempering painting ,toilet seats, and sanitary fitting etc.
2026_HPSEB_143164_1
HPSEBL/CEG/CMD/2026-27-14
Open Tender
Repair and Maintenance Services
Percentage
SUNDERNAGAR
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
₹4,082
21 Sept 2026
10 Sept 2026
18 Sept 2026
10 Sept 2026
18 Sept 2026
10 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sq. metres and below | 7 | Each | 257.24 | ₹1,800.68 |
| 2 | providingand fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed Portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 7.72 | KG | 659.56 | ₹5,091.81 |
| 3 | providingand fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed Portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 9.22 | KG | 684.4 | ₹6,310.17 |
| 4 | Providing and fixing glazing in aluminium door, window, ventilator
shutters and partitions etc. with EPDM rubber / neoprene gasket etc.
complete as per the architectural drawings and the directions of engineerin-charge . (Cost of aluminium snap beading shall be paid in basic item): with colored laminated aluminum sheet 4mm thick | 2.73 | SQM | 1,759.38 | ₹4,799.59 |
| 5 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately in type-V -01 | 0.11 | CUM | 1,45,783.1 | ₹15,598.79 |
| 6 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) 35 mm thick shutter | 5.44 | SQM | 3,611.98 | ₹19,649.17 |
| 7 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer- in- charge. | 1.68 | CUM | 1,692.12 | ₹2,842.76 |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) | 1.68 | SQM | 8,647.04 | ₹14,527.03 |
| 9 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm | 11.6 | SQM | 51.92 | ₹602.27 |
| 10 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge In flooring on a bed of 10 mm thick mortar 1:4-1acid proof cement :4coarse sand) | 55.45 | SQM | 1,950.54 | ₹1,08,157.44 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.47 MB
bid14.pdf
Tender Documents • 0.23 MB
BOQ_212669.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .