Delhi

Active

Works

Miscellaneous Works

RMO Various EandM Services in various Delhi Govt. Staff Qtrs. under AE E EMSD III, Sunlight Colony, New Delhi

Public Works Department

As per site | South East Delhi, Delhi

Amount: ₹5.8 LCloses: 23 Oct 20266d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published16 Oct 2026
Closes23 Oct 2026
Bid Opening23 Oct 2026

Tender Value

₹5.8 L

EMD Value

₹11,618

Closing Date

23 Oct 2026, 3:00 pm6d left

Tender Inviting Organisation

Name

Assistant Engineer(E), PWD EMSD-III South East, Su

Address

Assistant Engineer(E), PWD EMSD-III South East, Sunlight Colony

Work Description

RMO Various EandM Services in various Delhi Govt. Staff Qtrs. under AE E EMSD III, Sunlight Colony, New Delhi

Tender Information

Tender ID

2026_PWD_300117_1

Reference Number

127/EE(E)/AE(E)-III/EMD South East/PWD/2026-27

Tender Type

Open Tender

Product Category

Miscellaneous Works

Form of Contract

Percentage

Period of Work

30 days

Location

As per site

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

12 documents required · 12 mandatory

Fee/PreQual/Technical

RequiredScan copy of EMD (.pdf)

RequiredCopy of Receipt for Deposition of Original EMD issued from division office of any Executive Engi (.pdf)

Requirediii) Copy of Enlistment Order of Contractor (.pdf)

Requirediv) Certificate of Work Experience (For Non CPWD Registered Contractors (.pdf)

Requiredv) Affidavit as per clause 1.2.3 of CPWD 6 (Required from non CPWD Registered Contractor (.pdf)

Requiredvi) Affidavit on Non Judicial Stamp Paper of Rs. 100 regarding debarment and blacklisting as per F (.pdf)

Requiredviii) Should have had Average Annual Financial Turnover of (50 of the estimated cost) during the l (.pdf)

Requiredix) Should not have incurred any loss (profit after tax should be positive) in more than two years d (.pdf)

Requiredx) Should have a Solvency of (40 of the estimated cost) from the bank as prescribed Solvency Certif (.pdf)

Requiredxi) Copy of Latest GST Return Filed. (.pdf)

Requiredxii) Copy of Valid Electrical Contractor license or an undertaking that they will either obtain vali (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹11,618

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

16 Oct 2026

Published

16 Oct 2026

Bid Opening

23 Oct 2026

Download Starts

16 Oct 2026

Download Ends

23 Oct 2026

Submission Starts

16 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (2 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Design, fabrication, supplying of illuminated LED display board of sizes suitable for mounting on wall/ angle iron frame as per approved design with the following specifications. a) Board frame shall be made of 25mm x 25mm square MS hollow tube of 18 SWG on which front sheet of 3 mm thick Aluminium composite panel (ACP sheet) shall be fixed and its back side should be covered by 22 SWF GI sheet. The Laser / Router shall be used for ACP letter cutting (for proper accuracy) as per drawing the 3 mm acrylic sheet be used for making raised letter with the help of laser, the letter should be 4 mm raised arrangement to fixing from inner side of the board. b) Letter of size as per drawing shall be made of minimum 3 mm acrylic sheet in which suitable arrangement for pasting LED modules shall be made. c) The letter shall be IP-65 protection d) LED modules of 1.2 volts Hilight/Samsung/Osram make (0.4 watt and minimum 120 lumens per watt) in one module with suitable pasting arrangements with the help of dual side tape or adhensive solution as reqd. e) Single LED driver shall be pasted in the board with IP-68 or more grade protection f) The signage board shall be bilingual (Hindi & English) with logo of PWD and will be of different sizes as per requirements Product. will be of different sizes as per requirements Product.	140	Sqft	3,995	₹5,59,300
2	Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as reqd.a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar work.	125	Kgs	172.6	₹21,575

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.77 MB

Work Item Documents

BOQ_400539.xls

BOQ • 0.28 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Design, fabrication, supplying of illuminated LED display board of sizes suitable for mounting on wall/ angle iron frame as per approved design with the following specifications. a) Board frame shall be made of 25mm x 25mm square MS hollow tube of 18 SWG on which front sheet of 3 mm thick Aluminium composite panel (ACP sheet) shall be fixed and its back side should be covered by 22 SWF GI sheet. The Laser / Router shall be used for ACP letter cutting (for proper accuracy) as per drawing the 3 mm acrylic sheet be used for making raised letter with the help of laser, the letter should be 4 mm raised arrangement to fixing from inner side of the board. b) Letter of size as per drawing shall be made of minimum 3 mm acrylic sheet in which suitable arrangement for pasting LED modules shall be made. c) The letter shall be IP-65 protection d) LED modules of 1.2 volts Hilight/Samsung/Osram make (0.4 watt and minimum 120 lumens per watt) in one module with suitable pasting arrangements with the help of dual side tape or adhensive solution as reqd. e) Single LED driver shall be pasted in the board with IP-68 or more grade protection f) The signage board shall be bilingual (Hindi & English) with logo of PWD and will be of different sizes as per requirements Product. will be of different sizes as per requirements Product.

140

Sqft

3,995

₹5,59,300

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as reqd.a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar work.

125

Kgs

172.6

₹21,575