Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹4 L
EMD Value
₹12,000
Closing Date
11 Nov 2021, 6:00 pmClosed
Executive Engineer CMD LJHP
Executive Engineer CMD LJHP Gantamulla
Replacement of water supply system of powerhouse.
2021_SPDC_145404_1
E NIT 03
Open Tender
Civil Works
Item Rate
180 days
LJHP Baramulla
As per SBD
8 documents required · 8 mandatory
₹300
Executive Engineer CMD LJHP
₹12,000
Yes
18 Nov 2021
28 Oct 2021
12 Nov 2021
29 Oct 2021
11 Nov 2021
29 Oct 2021
29 Oct 2021 - 10 Nov 2021
Amount
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 15 mm dia. nominal bore.
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 19.6.2 20 mm dia. nominal bore.
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:2.8.1 All kinds of soil
Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work).19.6.6 50 mm dia. nominal bore.
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931. (To be paid as per actual at site)
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931.)
Supply Of 1HP motor of standard make along with necessary accessories as per directions of site engineer.
Supply Installing Testing and commisioning of 15HP,3 phase Submersible pump,50Hz,150mm Bore,Del 50mm,complete job.Along with Star Delta starter assembly (Prefereably Digital) and Required Cables as per the specifications of the motor
Supply,installation and commissioning of 3 phase Digital voltmeters to be incorporated in the mains of Submersible pumps
Supplyin 6/8mm Sling wire of IS Standard Quality (50 Rm Length ) along with U clamps required for holding the submersible pumps,Clamps should be compatible with the wire provided.
Supplying Chain Block of 1T capacity.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.(Add 10% above on scheduled rate of 2207)
Providing and fixing 15 mm dia G.I. elbows
Providing and fixing 20mm dia G.I elbows
Providing and fixing GI Socket for 20mm pipe
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. 50 mm nominal bore
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. 20 mm nominal bore
19.36 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. 15 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 50 mm nominal bore
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in?charge.
Providing and Fixing Tees 20mm 15mm 20mm
Providing and fixing 20 mm G.I. Tee (equal)
Providing and Fixing 15 mm G.I. Tee (equal)
20 mm to 15 mm G.I. sockets (reducing)
Supplying of 12pcs/set spanner wrench Ratchet Ring box set Kit Mechanic tools
Supplying of 24" real heavy rigid 24" pipe wrench of standard quality as per directions of site engineer.
Supplying Die set for 2" nominal bore pipe of approved brand
Supplying Die set 15mm to 25mm size (should cover standard sizes in the range mentioned) of ISI mark
Suppling of Hacksaw blade frame of standard make
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :6.1.5 Cement mortar 1:6 ( 1 cement : 6 coarse sand).
Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.Quantity vide above
12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand).
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring,shuttering, finishing and reinforcement with.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.(Give 10% above on this item)
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.
Supplying and installing PVC Light weight Sump Cover (24inch x24 inch).Quantity: 1No.
Cement 15 km lead
Sand from Johama avg lead 30km lead
Stone aggregate from veerwan 25km lead
Bricks From Budgam:(50km avg)
M/S MEHRAJ UD DIN MIR
ALTAF HUSSAIN MONGA
stage.html
html • 0.03 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .