Cost of supply and erection of children play equipments in ABP Range Kottoor

Supply and erection of ladder with slider of height 160cm and width 45cm by using GI 75x40mm with 14 gauge as main section for ladder, slidder and two main support, 25x25mm 14 gauge used as hadrails, three numbers of 50x25mm 14 gauge section used for each steps, 2 mm thick GI sheet in used for slidder and GI sheet will rest on 25 mm dia solid sections at 30 cm center distance fixing it firmly in concrete base and finish with epoxy paint and primer (two or more coats) including conveyance charge and fitting charge etc. as per the directed by the officer in charge

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared

Supply and erection of Four Seater See Saw with total length 3m and a width of 0.5m by using two numbers of 50mm dia GI pipe with 14 gauge for fixing the main frame in the ground, the main frame also 50mm dia GI pipe with 14 gauge, 4 nos. fiber FRP seats will fix on the main frame and 20mm dia GI pipe with 14 gauge for handle and fixing it firmly in concrete base and finish with epoxy paint and primer (two or more coats) including conveyance, labour charge etc as per the direction of officer in charge

Supply and erection of Marry go round duck of dia 2m, Height 80 cm using 75 mm dia GI pipe with 14 gauge as Center post, 50mm dia GI pipe with 14 gauge as Outer frame, 32mm dia GI pipe with 14 gauge for supports. Heavy duty ball bearing used for rotation with FRP ducks and fixing it firmly in concrete base and finish with epoxy paint and primer (two or more coats) including conveyance, labour charges etc. as per the direction of officer in charge

Supply and erection of MINI SLIDE using GI and FRP slide. The platform will be 1.2m height, 0.6 m width and 1.8m length, the minimum thickness of FRP slide should be 5 mm, the main frames including the support in the ground will be GI 50mm dia with 14 guage, the steps and the handrail will be 25mm dia with 14 gauge, 2 mm thick GI sheet used for platform and fixing it firmly in concrete base and finish with epoxy paint and primer(two or more coats) including conveyance, labour charges etc. as per the direction of officer in charge

Supply and erection of ROCK CLIMBER with 2.4 height, 1.8m width using FRP board, FRP holders and GI pipe, 75 mm dia pipe with 14 gauge used as main frames, 50mm dia GI pipe used for supports, 5mm thick FRP sheet and 5mm thick climbing holds used in one side and a rope with vertical and horixzondal arrangement at 30cm center to center on the other side and fixing it firmly in concrete base and finish with epoxy paint and primer(two or more coats) including conveyance, labour charges etc. as per the direction of officer in charge

Supply and erection of MULTI SWING using GI PIPE of size 6x1.8x2.4m using three numbers of A frame of pipe size 75mm dia with 14 gauge and 50mm dia pipe used as cross member, 3 nos. of FRP seats with rubber chain used for swing, two numbers of bucket seat for another swing, bucket swing pipe size 50mm dia with 14 gauge and have a high quality big bearing for movement, and fixing it firmly in concrete base and finish with epoxy paint and primer(two or more coats) including conveyance, labour charges etc. as per the direction of officer incharge

Supply and erection of Platform Merry-Go-Round using GI pipe and Round wheel of dia 1.2m. The platform will rest on a GI pipe with 100mm dia with 14guage of height 30cm above ground level. 50mm dia GI pipe 14 gauge used for wheel pipe and supports, for platform used as durable, anti-skid material of 5mm thick Fiber reinforced plastic(FRP), center pole 0.3m length, handle pipe 33mm dia. The entire structure is mounted on a heavy-duty, permanently lubricated bearing shaft to ensure smooth rotation as and fixing it firmly in concrete base and finish with epoxy paint and primer (two or more coats) including conveyance, lbaour charges etc. as per direction of officer in charge

Supply and erection of Tube Spiral slide using GI pipe and FRP slide. The main frames for supporting the platform will constructed by four numbers of GI pipes of 75mm dia with 14 gauge, the ladder will be GI 75x40mm with 14 gauge as main section for ladder and steps and the handrail will be 25mm dia GI pipe with 14 gauge and FRP slide of width 45cm and thick 5m. The platform 1.2mxx1.2m size and constructed by GI sheet of thickness 2mm and fixing in concrete base and finish with epoxy paint and primer(two or more coats) including conveyance, labour charges etc. as per the direction of officer in charge

Supply and erection of Swing of height 4.5m, using A frames in the two ends of GI pipes of ida 100mm and 3.2mm thick inter connection bracing with 25x25x3.2mm SHS, the top of the GI pipes are connected by a beam of sections 50x50x3.2 and 25x25x3.2mm. The leg of the GI pipes will rest on RCC grade concrete below ground level. Steel chain is used for hanging the swing and wooden seats should be provided for two persons at a time. The rate including conveyance, labour charges and finish with epoxy paint(two or more coats) etc. as per the direction of officer in charge