SPL REPAIR TO BLDG NO T 8 T 9 T 10 T 11 T 88 T 89 OFFICE ACCN T 84 OFFR SINGLE ACCN T 91A COOK HOUSE T 90 TO T 92 OFFICE ACCN AND T 223D URINAL AT MIL STN KAUSANI UNDER GE RANIKHET

Amount

BOQ/Sch 'A' B/R portion Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness.(below or above ground level) Complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection finishing the surface even and smooth without using extra cement Complete all as specified and directed.

Surface channel in concrete 1:3:6 type C-2 (40 mm graded aggregate) for drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement complete all as specified and directed.concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. all as specified and directed.

Surface Excavation in hard/dense soil n,exc 30cm deep and averaging 15cm deep and getting out complete all as specified and directed.

M & L for hard core of gauge not exc. 63mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M & L for 100 mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in flooring/hardstanding/path complete all as specified and directed.

M&L for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, frame rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified & directed.

S&F 30 mm thick 2nd class hardwood glazed and skeleton window shutters rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc; sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.20(b); supplied and fitted in chowkats , but divided into squares, with plain, chamfered or roun ded, mitred and rebated sash bars, any numbers complete complete all as specified and directed.

S & F butt hinges, medium weight, Mild steel and fixed, size of hinges 75mm complete all as specified and directed.

S & F butt hinges, medium weight, Mild steel and fixed, size of hinges 100mm complete all as specified and directed.

Supply and fixing 100 mm mild steel pressed handles, oval type, stove enamelled black and fixed with wooden screws, complete as specified and directed.

Supply and fixing 150 mm mild steel pressed handles, oval type, stove enamelled black and fixed with wooden screws, complete as specified and directed.

M&L for mild steel barrel tower bolts stove enameled black, with bright bolt length of bolt 100 mm (ISI marked) fixed complete fixed with screws,complete as specified and directed.

M&L for mild steel barrel tower bolts stove enameled black, with bright bolt length of bolt 150 mm (ISI marked) fixed complete fixed with screws,complete as specified and directed.

Supply and fixing mild steel sliding door bolt clip type (ISI Marked) stove enameled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts, length of bolt 250 mm and fixed with mild steel wood screws all as specified and directed

S&F MS 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

S & F floor door stopper of chromium plated body with rubber shoe fixed in door, overall length of cover plate 140 mm all as specified and directed.

Hacking out old broken glass ( any thickness ) size or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with Stainless steel wire staples.

M & L for old painted surface to steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel including preparation of surfaces complete all as specified and directed.

M & L for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) complete all as specified and directed.

M&L for plain cement concrete type D-2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified & directed.

M&L precast cement concrete 1:3:6 type C1(using 20 mm graded stone agg) as in block masonry with solid blocks exc 10 cm in width and set in cement mortar 1:6 complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store.

S&F GI water tubing of 15mm dia ,medium grade conforming to IS-1239(Part -1) including all fittings such as bends,tees,short pieces,connectors,elbows,reducers,union dockets etc & fixed to walls,ceilings, & laid on floors complete all as specified and directed.

Dismatling PVC Water tank Exc 250 & n exc 500 ltr and removing from site as specified and directed

S & F Rotational moulded PVC water storage tanks 500 Ltrs capcity three layer (cylindrical vertical with closed top) hoissted and fixed in position all as specified

S and F Ball brass valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F Gun-metal, globe or gate valves 15mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed.

S & F in repair vitreous china wash basin, white flat back size 550X400 mm, (flat back or angle back type) including brackets and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs.

S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed.

S&F in repair vitreous china squatting pan, 'Orissa' pattern, size 580mm x 440mm, white, with integral foot rests, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc..

S&F in repair vitreous china wash down water closet pan (padestal pattern) with seat cover, trap,all reqd accessories (excluding fixing bolts, flushing cistern and flush pipe) etc complete all as specified and as directed.

S & F in repair 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.

S&F in repair stop valves, cast copper alloy, fancy type chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore dia of pipe.

S&F 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

S&F 600mmx450mm bevelled edge looking mirror and fixed to wooden plug with CP brass screws and cup washers complete all as apecified & directed

S&F 75mm dia Cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, fixed on walls or floors complete all as specified and as directed

S&F PVC (SWR) plain bend 75 mm dia, of any redius with rubber ring joints, complete all as specified and as directed

S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

S&F chromium plated Soap dish vitreous china white approximate size 160x160x90 mm fixed to plug with chormium plated brass screws all as specified and directed.

S&F in repair PVC connections 15mm dia , 450mm long, , with PTMT nuts & washers at both ends complete all as specified & directed.

Dismantaling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre-painted galvaLume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screws complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strenth of 550 Mpa as in roof covering / clading to waall , fixed self tapping screws complete all as specified and directed.

S&F Galvanised, corrugated 0.63mm thick mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts, with bitumen washer / screws complete all as specified and directed.

S&F Plain, galvanised, 0.63mm mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts, with bitumen washer / screws in normal/nainital pattern Complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

M & L Rolled sections as in main and cross beams, hip and jack rafters/roof trusses; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 290 gde E -165 complete all as specified and directed.

Demolition brick work or stone/ boulder masonery built in cement mortar including all quoins , pillars etc

M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM (1:6) complete al as specified

M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

S & F for Aluminium anodised snap grid frame work for false ceiling comprising of following section for making partitions of 605 X 605 mm size fixed to walls with rawl plugs and screws and hang to roof with s 6 mm dia. G.I. (upto 1200mm length) adjusting levelfixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners12.5mm dia. 40mm long complete all as specified. size of main tee shall be :- (i)36.5mmx25mmx1.4mm thick, Weighing 0.24Kg/Rm (ii)Cross Tee 23.5mmx36.4mmx1.4mm thick Weighing 0.191 Kg/Rm and (iii)Wall angle 40mmx25mmx2mm thick. Weighing 0.36 Kg/Rm

S & F 4 mm thick non asbestos fiber designer ceiling (E-board classic) board / tiles for insulation and accoustic purpose, 600 X 600 mm size fixed in ceiling with and including dusting of surface complete all as specified and directed

S & F Second class hardwood 25 mm boarding plain one side with butt joint fixed with nails in any situation complete all as specified and directed.

S&F 9mm thick plywood as in wall cladding, graded BWR, type BB complete all as specified & directed.

S&F Cover fillets 4.5mm thick of standard hard board, 40mm wide, and fixing with screws as in framework for plywood in wall cladding complete all as specified & directed

M&L for 25 mm thick Cement concrete type-B-0 1:2:4 (12.5 MM graded aggregate) as subbase in floors all as specified and directed

M&L pre-polished Machine cut kota stone slab flooring 20-25mm thick over cement screed bed (1:6) 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & direted.

M & L pre-polished Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement mortar (1:4) 10 mm thick backing coat and jointed with with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M & L for 100 mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in flooring/hardstanding/path complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.complete all as directed.

M & L for glazed ceramic coloured / printed tiles 300mm x 450mmX7mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/coloured cement to match the tiles, complete all as specified and as directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed by Engr-in-charge.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for. (reinforcement cut as required to facilitate demolition)

M&L RCC Type B1 1:2:4 (20mm graded aggregate)for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

Formwork to rough finished surface of concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)

M & L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.&removing rubbish to a disance not exc 250m Complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make complete all as specified. Note: WPC shall be measured & paid separately.

M & L for 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even & smooth complete all as specified.

Supply only integral water proofing compound complete all as specified & directed.

M & L for 15 mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, surface finished even & smooth with using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed

M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior emulsion over a coat of primer complete all as specified and directed.

M&L for preparation of old decorated surfaces by washing, rubbing down and stopping of painted , plastered or un-plastered surfaces of walls and applying one coat of oil bound distemper white or tinted complete all as specified and directed.

M&L for preparation of old decorated surfaces by washing, rubbing down and stopping of painted , plastered or un-plastered surfaces of walls and applying one coat of weather proof exterior emulsion complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specifed & directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4.0 Sqm each complete all as specifed & directed.

Taking down shutters ( per leaf ) of any description not exc 1 Sqm each complete all as specified and directed.

Taking down shutters ( per leaf ) of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

Refixing in the same opening shutter of any description not exc 1 Sqm each complete all as specified and directed.

Refixing in the same opening shutter of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

S & F in repair MS framed work such as grills, gratings, etc., with end of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 190-0 or Fe-165-0.

S & F 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F stainless steel wire netting of wire 1.4mm dia, size of mesh 20 mm, fixed with tinned tacks of stainless steel wire staples complete all as specified & directed.

M & L for newly painting to steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete all as specified & directed.

S & F in repair bib taps, cast copper alloy, 15 mm dia, Chromium Plated, fancy type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified.

S&F sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F stainless steel wall mounted plate rack of size 780x760x240mm, made from the stainless steel sheet having thickness 1 mm and weight not less than 7.50 Kg, design & pattern as approved by GE, having sufficient space for placing crockeries, fixed on wall with rawl plug & screws, complete all as specified and directed

Dismatling PVC Water tank Exc 500 & n exc 1000 ltr and removing from site as specified and directed

S & F Rotational moulded PVC water storage tanks 1000 Ltrs capcity three layer (cylindrical vertical with closed top) hoissted and fixed in position all as specified

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both faces are covered with decorative face veneer with lipping/frame to match complete all as specified & directed.

S & F in repairs 6mm thick decorative PVC Sheet hollow (design approved by GE) for insulation and acoustic purpose on wall surface, screw to timber frame work for levelling of wall as reqd, including with panelling to vertical surfaces, fixed with rawl plug and screws complete all as specified and directed

BOQ/Sch 'A' E/M portion Taking down carefully copper / aluminum point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, lamp holders, bracket, light fittings, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls, floors etc as per existing complete all as specified and directed.

S & F point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core multi-stranded) copper conductor cable (FR-LSH) drawn into and including PVC casing capping/ PVC conduit pipe of suitable size with its all necessary fittings and accessories on wooden / stone / brick masonry wall surface and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size solid copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed.

All as per item No. 103 hereinbefore but wiring for one 3 pin 5 Ampere socket outlet point on the same board, controlled by other switch complete all as specified and directed.

All as per item No. 103 hereinbefore but wiring for one 3 pin socket outlet 5 amps independent with cable 1.5 sq mm size.

All as per item No. 103 hereinbefore but wiring for one 3 pin 15 Ampere socket outlet point using 2.50 sqmm size wire and earth wire of PVC insulated ( green colour) 1.50 sqmm size solid copper conductor cable on the independent board complete all as specified and directed.

S & F of switch piano flush type single pole one-way 5 Ampere complete all as specified and directed.

S & F of switch piano flush type single pole one-way 15 Ampere complete all as specified and directed.

S & F of 5 Ampere socket outlet flush type, multi purpose suitable for 2 and 3 pins (Total 5 Pins) complete all as specified and directed.

S&F of lamp holder PVC / polycorbonate type insulated body with back plate suitable for batten fitting / angle fitting complete all as specified and directed.

S & F of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Ampere flush type with shuttered complete all as specified and directed.

S & F of ceiling rose, surface bakelite, 65 X 50 mm, 3 terminals complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in replacement bldg security light luminaires including 25 watt LED street light for 220-230 V, 50 Hz with IP 65 protection including bracket for fixing in wall, made of 25mm bore light grade GI Pipe connecting up with three core twisted flexible copper conductor cable complete all as specified and directed.

S&F 9 watt LED blub in holder/bracket complete all as specified and directed. Make : Havells Cat No LHLDEUEEML8R009 or equivalent

S & F of sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 8 ways with 200 ampere rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and directed.

Supply and fixing SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing SP 6 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply & Laying and fixing jointing connection and testing LT UG XLPE of size 10 Sqmm 2 core insulated PVC sheathed,armoured heavy duty 1100 volts grade stranded aluminium conductor cable of following sizes confirming to IS laid in trenches/ducts/fixed on poles/wall/laid under road /culverts, encased GI pipe including dismentling the same all as specified & directed.

Supply, fixing and laying 25mm GI tubes light grade ISI mark with all fitting and fixed with pole, wall and passing of cable as directed at site ( MS work such as clamps, nuts, bolts, shall be measured and paid separately) complete all as specified and directed.

Excavation in trenches in hard/denese soil no exceeding 1.5mtr in width and not exc 1.5mtr in depth for laying of cables and getting out incl jointing bottom surface to the required level/slope complete all as specified.

Returning, filling , including spreading leveling watering and well ramming in layers not exceeding 25 cm in hard soil all as specified and directed by Engr-in-Charges.

Removing excavated material/soil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr starting point complete all as specified

Supply and laying of sub class 'B' old size bricks as in cable protection in trenches complete all as specified and directed.

M & L for laying of fine river sand, free from sharp materials , cable cushioning in trenches all as specified and directed

M&L for earthing complete with galvanised steel, earth plate electode 600x600x6mm thick buried directly in gournd ( earth pit not less than 2.25mtrs below ground level ) with the top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 423 of MES schedule 2010 Part II connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all-round the GI earth plate, watering pipe 20 mm dia GI medium grade, GI sheet 0.63 mm thick funnel, wire, gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round suitable lifting handle to cover, GI protection pipe 15mm dia 'light grade' upto 7.5 Mtr from electrode etc, complete all as specified and directed including testing on completion. NOTE:- i) Earth lead beyond 7.5 m from electrode to earth terminal point/main switch board & GI pipe light grade 15 mm dia for protection against mechanical damage to lead shall be measured separately. ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost.

S & F of sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 12 ways with 200 ampere rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and directed.

Supply and fixing SPN 40 to 63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply & Laying and fixing jointing connection and testing LT UG XLPE of size 16 Sqmm 2 core insulated PVC sheathed,armoured heavy duty 1100 volts grade stranded aluminium conductor cable of following sizes confirming to IS laid in trenches/ducts/fixed on poles/wall/laid under road /culverts, encased GI pipe including dismentling the same all as specified & directed.

S & F of Modular switch 1 way 6A, 1 module complete all as specified and directed.

S & F of Modular switch 1 way 16A,1 module complete all as specified and directed.

S & F of Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S & F of Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed.

S & F modular bell push single pole 6 Ampere 1 module complete all as specified and directed.

S & F Bell Multi Music type complete all as specified and directed.

Supply and fixing LED lights fitting 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F Decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base complete all as specified and directed. Make : Havells Cat Part No LHFOAJE1TN1I060

S & F of White cover plate with frame, 3 module complete all as specified and directed.

S & F of White cover plate with frame, 6 module complete all as specified and directed.

S & F of White cover plate with frame, 8 module complete all as specified and directed.

Supply and fixing 10 Watt garde light unique concept LED Bollard in IP 66 to ensure sustainable performance in all section and aesthetics which keeps the surrounding lively incl required excavation and PCC work (1:3:6) type C-2 complete all as specified and directed. Havells (Cat Part-TURINBLS10WLED830PSYMTOPC or equivalent)

Joshi Constructions (BID ID -3331925)

Builders Harpal (BID ID -3334164)

NK CONSTRUCTION (BID ID -3331298)