RENOVATION AND IMPROVEMENT OF BLDG NO P-663 AT AF STN BHUJ

Amount

Taking down existing water proofing tretment on RCC slab / beams with bitumen felt with out damaging structure and removing the debrise outside the MD land and M&L for plaster 10 mm thck on concrete surfaces in cement mortar 1:3 finished even and smooth using WPC @ 3% by weight of cement and preparing the surfaces to recive WPT treatment , applying a coat of bitumenm primer confirm to IS - 3384-1986 @ 3% per sqm . providing APP modified memrane with non woven polyster reinforcement/mat ( centre core) by tourch application over primed surfaces complete all as specified and directed by Engineer-in-Charge.

Material & labour for cement concete type B-1,1:2:4 mix (using 20 mm grade aggregate) as in roof padding etc finished surface even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land complete all as specified and as directed by Engineer-in-Charge.

Material & labour for 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface rough for laying finishes complete all as specified and directed by Engineer-in-Charge.

Material & labour for non skid ceramic colour tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over 15 mm thick screed bed (1:4) etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for 450x350 x7 mm thick glazed ceramic tiles (digital pattern) including highlighter colored as in dado/ skirting and vertical serfaces set & jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4 to match the shade, pattern, laying etc of tiles as directed at site complete all as specified and directed by Engineer-in-Charge.

Material & labour for dark shaded virified ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid laid over 15 mm thick screed bed in cm 1:6 etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for dark shaded Virified Ceramic Coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in, as in vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid laid over over 10mm thick rendering in cm 1:4 complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) n exc 1.5 sqm complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhat or frames with shutter (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.00 sqm complete all as specified and directed by Engineer-in-Charge.

Material & labour for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out of anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle, 75mm long tower bolt and anodised aluminum fittings such as stay, 75mm long Butt hinges glazing with 5 mm thick tinted sheet glass fixed with Solar control film 25 micron reflective type (gareware sun control or equivalent) and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) complete all as specified and directed by Engineer-in-Charge. (Tint of glass shall be approved by GE) Note :- Aluminium grill fixed under above item shall be measured and paid separately .

Supply & fix anodized aluminium ventilator fixed type with frames aluminium section size 63X38X1.20mm thick including fly proofing ventilator fixing with standard rubber gasket locking arrangements aluminium beadings & joining cleats, suitable butt hinges, handle and tower bolts for fixing complete all as specified and 5.5 mm thick tinted glass with Solar control film 25 micron reflective type (gareware sun control or equivalent) complete all as specified and directed by Engineer-in-Charge.

Supply only aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm complete all as specified and as directed by Engineer-in-Charge.

Providing and fixiing solid PVC double door frame of size 50mm x 95 mm with a wall thickness of 5 mm, made by jointing 3 Nos, hear bent PVC sheet 'C' channel of 5 mm foam sheet of sizes 35mm x 30mm x 25mm and 40mm x 35 mm x 40mm & 25 mm x 30mm x 35mm using solvent cement. The two side 'C' channel shall be reinforced with 19mm x 19mm MS square tusbe of 19mm gauge. All the three 'C' channel shall be fixed to flat baseof 5 mm PVC sheet with solvent cement. The profile shall be mitre cut at two corners and jointed by inserting 4 Nos. 150mm long brackets of 15 mm x 15mm MS suare tusbe inside the 19mm x 19mm square tubes. The door frame shall be fixed to the wall using 65/100 mm long MS screws throguh the frameby using PVC fasteners. A minimum of 8 Nos of screws to be sprovide for each vertical member & minimum 4 nos for horizontal member etc complete all as specified and directed by Engineer-in-Charge.

Providing and fixiing solid PVC single door frame of size 50mm x 47 mm with a wall thickness of 5 mm, made by jointing 3 Nos, hear bent PVC sheet 'C' channel of 5 mm foam sheet of sizes 35mm x 30mm x 25mm and 40mm x 35 mm x 40mm & 25 mm x 30mm x 35mm using solvent cement. The two side 'C' channel shall be reinforced with 19mm x 19mm MS square tusbe of 19mm gauge. All the three 'C' channel shall be fixed to flat baseof 5 mm PVC sheet with solvent cement. The profile shall be mitre cut at two corners and jointed by inserting 4 Nos. 150mm long brackets of 15 mm x 15mm MS suare tusbe inside the 19mm x 19mm square tubes. The door frame shall be fixed to the wall using 65/100 mm long MS screws throguh the frameby using PVC fasteners. A minimum of 8 Nos of screws to be sprovide for each vertical member & minimum 4 nos for horizontal member etc complete all as specified and directed by Engineer-in-Charge.

Providing and fixing 35mm thick factory made moulded door shutter consisting of solid core single leaf flush door of 30mm thichness, lipped with 15mm (5mm x 30 thick x 30mm width on one stiles and top reails & bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2 raised panel design in different plain and 2mm plain coloured PVC sheet on other side using rubber adhesive on flush door & solvent cement adhesive on the PVC lipping etc complete all as specified and directed by Engineer-in-Charge.

Providing & fixing 30mm thick factory made wiremesh solid PVC door shutter consisting of frame made out of 19 gauge thickness & size of 19 mm x 19mm of style and 15mm x 15mm for top, lock and bottom rails. And in addition one veritical member throughout in between styies. MS frame shall be covered with 5mm thick heat moulded PVC 'C' channel of appropriate sixe 15mm wide PVC sheet beading is to be stuck internally in the back side of stiles and ralls of door with solvent cment adhesive. So that the wiremesh can be fixed properly. The wiremesh solid shutter have PVC sheet to match the sutter of PVC moulded shutter etc complete all as specified and directed by Engineer-in-Charge.

Supply & fix 75mm size butt hinges,cast brass with mild steel hinge pin bright polished complete all as specified and directed by Engineer-in-Charge.

Supply & fix 100 mm size Butt hinges, cast brass,with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed by Engineer-in-Charge.

Supply & fix 100mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.

Supply & fix 150mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge.

Supply & fix aluminium handles, cast type, anodized 100 mm size comp ISI Marked complete all as specified and directed by Engr-in-Charge.

Supply & fix aluminium handles, cast type, anodized 150 mm size comp ISI Marked complete all as specified and directed by Engr-in-Charge.

Supply & fix aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 250mm long complete all as specified and directed by Engineer-in-Charge.

Supply & fix 150 mm size (overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge.

Supply & fix small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including MS butt hinges, medium weight, cold rolled 50mm long, articles n exc 200 Cu cm each of Ist class soft wood complete all as specified and directed by Engr-in-Charge.

Supply & fix in repair mild steel, 300 mm long ordinary helical door spring incl roller and roller plate incl welding with frrame or chowkhats complete all as specified and directed by Engr-in-Charge. .

Supply & fix in repairs 20/22mm dia fancy type SS 304 grade curtain rods with wall thickness not less than 1.25mm, fixed to walls with and including a pair of fancy type SS brackets and SS clamps, bracket ,end ball , rounded block (coated with brown/cherry/golden colour best quality as of approved pattern and shade complete approved by GE complete all as specified and directed by Engr-in-Charge. (Note - Length of curtain rod shall be measured and paid for as one unit. Quoted rate is deemed to include for provision of a pair of brackets and clamps per unit length)

Taking up or down 15mm bore size of steel tubing and connections including removal to store for reuse or credit to contractor complete all as specified and directed by Engr-in-Charge Note : (a) The rates apply to pipes above or below ground only in repairs and alterations. (b) 'The rates for taking down piping, etc., and removing to store include disconnection of fittings from tubing,where required .

Supply & fix 20mm nominal dia of CPVC pipes ISI marked, IS-15778 with all fittings for hot and cold water, fixed with solvent cement complete to walls and ceilings or laid in floors (SDR-13.5) complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs 20mm dia bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs rotational moulded polythene white water storage tank triple layered (cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 500 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed by Engr-in-Charge.

Dismantling of cast iron/PVC /AC or reinforced concrete pipes of any size jointed in cement mortar/solvent cement etc. and taking out of from trenches/walls, (including all fittings), with spigot and socket ends and lead joints including burning out joints if required complete all as specified and directed by Engr-in-Charge for following sizes :-

100/110mm bore

75mm bore

Supply & fix PVC (SWR) single socketed in any length with rubber ring joints sealed with approved adhesive and fixed on wall with MS brackets or in floor complete all as specified and directed by Engr-in-Charge for following sizes :-

110mm bore

75mm bore

Supply & fix PVC (SWR) bends any radius of 110 mm dia complete all as specified and directed by Engr-in-Charge.

Supply & fix PVC (SWR) bends any radius of 75 mm dia complete all as specified and directed by Engr-in-Charge.

Supply & fix PVC cowl for 110 mm size pipes, ISI marked, IS-14735, jointed with solvent cement complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs of PVC gully trap 150x110mm,setting and jointing with solvent cement including dismantling of surrounding concrete and fixing of gully trap with and including cement sand mortar 1:3 complete all as specified and directed by Engr-in-Charge.

Supply & fix grating doom 100mm dia of PTMT (Minimum weight 25gms complete all as specified and directed by Engr-in-Charge.

Supply & fix 75 mm bore PVC (SWR) floor trap, plain with grating including jointing to waste pipe complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs for bib taps, fancy type, cast copper alloy with crutch handle, chromium plated, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs angle cock / stop valve fancy type 15 mm dia, cast copper alloy, chromium plated, high pressure with crutch handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engr-in-Charge.

Supply & fix PVC connection 450mm long with check nut for wash hand basin/ flushing cistern etc complete all as specified and directed by Engr-in-Charge.

Supply & fix in repair shower rose chromium plated with swivel joints of size 150mm cast copper alloy CP, fancy type with CP neck 9" long made to shape complete all as specified and directed by Engr-in-Charge.

Supply & fix in repair PVC flexible waste pipe (heavy duty) 32/40 mm for fixing to WHB/kitchen sink with long screwed shanks and fly nut flanged complete all as specified and directed by Engr-in-Charge.

Supply & fix in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, white colour, low level with inlet, ball valve, float, flush pipe of 32 mm dia and handle including brackets incl PVC connection with CP brass nuts on both sides complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge.

Supply & fix CP towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs vitreous china wash basin white flat back size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides, complete all as specified and directed by Engr-in-Charge.

Supply & fixin repair water closet white vitreous china ware orisa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC). complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding, flushing cistern and flush pipe) complete connected to p trap complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs jet spray to EWC with PVC nozzle, PVC fish plates and PVC fish plates and PVCflexible pipe etc complete all as specified and directed by Engr-in-Charge.

Supply & fix pillar tap mixer cast copper alloy fancy type with capastan headsm chromium plated screwed down high pressure with or without lettered “HOT or “COLD” with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engr-in-Charge.

Supply & fix n repair fancy CP wall mixer (3 in 1 type) with provision for both overhead shower and hand shower with 115mm long bend pipe and wall flange complete all as specified and directed by Engr-in-Charge.

Supply & fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-Charge.

Supply & fix PVC shelf wall corner size 230 mm with all fittings/brackets complete all as specified and directed by Engr-in-Charge.

Supply & fix PVC bathroom cabinet with mirror complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs chromium plated towel ring complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster any description on brick , block or stone walls etc including raking down joints hacking for key secrubing down with water etc any description complete all as specified and directed by Engr-in-Charge.

Material & labour for rendering on concrete surfaces 15mm thick in two layers first coat 15mm thick in CM 1:6 , finished even and fair complete all as specified and directed by Engr-in-Charge.

Material & labour for rendering 15mm thick in CM 1:4 with water proofing compound @3% by wt of cement on fair faces of brick work or concrete surfaces,, finished even and fair complete all as specified and directed by Engr-in-Charge. Note : WPC will be measured and paid separately.

Material & labour for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in CM 1:4 for fair finished surfaces complete all as specified and directed by Engr-in-Charge.

Supply only water proofing compound complete all as specified and directed by Engr-in-Charge.

Material & labour for preparation of new plastered or unplastered surfaces of walls and applying two coat of distemper oil emulsion over a coat of applying 3mm thick wall care putty ( as approved by GE) complete all as specified and directed by Engr-in-Charge.

Material & labour for preparation of new plastered or unplastered decorated external surfaces of walls and applying two coats of exterior emulsion paint over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. ( as approved by GE) complete all as specified and directed by Engr-in-Charge.

Material & labour for preparation of new plastered or unplastered surfaces of ceiling and applying two coat of distemper oil emulsion over a coat of applying 3mm thick wall care putty ( as approved by GE) complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing the rubbish from the work site complete all as specified and directed by Engr-in-Charge.

Material & labour for cement concrete 1:3:6 type C-2, (using 40mm graded aggregate) in surface channel and drain incl necessary form work complete all as specified and directed by Engr-in-Charge.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement complete all as specified and directed by Engr-in-Charge.

Material & labour for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate.) as in road side pavings, plinth protection, etc. finishing even & smooth using extra cement complete all as specified and directed by Engr-in-Charge.

Material & labour for 75 mm thick cement concrete type D-2 1:4:8 as in sub base for tiles complete all as specified and directed by Engr-in-Charge.

Material & labour for sand filling under floors or in foundations spreading and levelling in layers n exc 25 cm thick, well ramming including watering and consolidation complete all as specified and directed by Engr-in-Charge.

Material & labour for machine pressed precast concrete interlocking paver block with gray cement and pigment, any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 Grade laid with grey cement and pigment complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engr-in-Charge.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engr-in-Charge.

Supply & fix pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall and make good to prevent leakage, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.

Supply & fix mild steel work in tubular trusses/structures of square/round/ rectangular pipes, rafters, purlins including special shaped washer etc. complete using ERW or inductuin butt welded tubes confirming to IS-1161-1979 grade St-240 including notching, drilling, fitting, rivetting and or welding or connecting bolts and nuts, cleats, gusset plates etc complete all as specified and directed by Engr-in-Charge.

Material & labour for preparing new or previously untreatedsteel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome primer on steel surfaces complete all as specified and directed by Engr-in-Charge.

Demolition of brick work built in cement mortar and removal of rubbish from site complete all as specified and directed by Engr-in-Charge.

block masonry with precast cement concrete type 1:3:6 (using 20mm graded aggregate) solid bloks exc 10cm inwidth and seting in CM 1:6 complete all as specified and directed by Engr-in-Charge.

Pulling down the existing U/S wires of any type from concealed wiring carefully of aluminium/copper point wiring (light, fan, bell, socket, power point etc.) with or without conduit, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete all as specified and directed by Engineer-in-Charge.

Pulling out sub main wiring only any size of aluminium conductor cable PVC insulated with or without condiut complete all as specified and directed by Engineer-in-Charge.

Taking down main switch/DB’s including MCB’s with board and fixture of any description and making good disturbed surface of walls etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through existing conduit including provn of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with new plastic laminated white coloured top sheet cover 3.0 mm thick on existing sunken box complete all as specified and directed by Engineer-in-Charge for :-

One light point controlled by one, one way switch single pole piano type .

One Fan point controlled by one, one way switch single pole piano type.

One 3 pin 5 Amp socket outlet on the same board.

One 3 pin 5 Amps socket out let on independent board.

One bell point controlled by one bell push.

All as per item No.87 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board complete all as specified and directed by Engineer-in-Charge. .

Supply & fix modular plastic flush box of module 1/2 flush ISI marked complete all as specified and directed by Engr-in-Charge.

Supply & fix modular plastic flush box of module 3 flush ISI marked complete all as specified and directed by Engr-in-Charge.

Supply & fix modular plastic flush box of module 4 flush ISI marked complete all as specified and directed by Engr-in-Charge.

Supply & fix modular plastic flush box of module 6 flush ISI marked complete all as specified and directed by Engr-in-Charge.

Supply & fix modular plastic flush box of module 8 flush ISI marked complete all as specified and directed by Engr-in-Charge.

Supply & fix modular plastic flush box of module 12 flush ISI marked complete all as specified and directed by Engr-in-Charge.

Supply & fix modular white cover plate with frame of module 1 flush ISI marked complete all as specified and directed by Engr-in-Charge.

Supply & fix modular white cover plate with frame of module 2 flush ISI marked complete all as specified and directed by Engr-in-Charge.

Supply & fix modular white cover plate with frame of module 3 flush ISI marked complete all as specified and directed by Engr-in-Charge.

Supply & fix modular white cover plate with frame of module 4 flush ISI marked complete all as specified and directed by Engr-in-Charge.

Supply & fix modular white cover plate with frame of module 6 flush ISI marked complete all as specified and directed by Engr-in-Charge.

Supply & fix modular white cover plate with frame of module 8 flush ISI marked complete all as specified and directed by Engr-in-Charge.

Supply & fix modular white cover plate with frame of module 12 flush ISI marked complete all as specified and directed by Engr-in-Charge.

Supply & fixing including testing of storage type Water Heater/Geyser of vertical type of capacity 25 Ltr, Rated 2000W,230V AC, 50Hz auto cutoff with a high tech adjustable thermostat,multifuction saftey valve,magnesium anode coated heating element, rust proof external body with unique polymer protective coated inner tank, red and green indicator lamp, suitable for highrise building suitable for water pressure head upto 8 bars star rating (BEE) 5 star ,high density & thick PUF that ensures energy efficiency and reduced electricity bills ,15 Amps heavy duty plug complete all as specified and directed by Engineer-in-Charge Note:-(i) The rate quoated shall be in including hanging of Geyser in wall with 2/4 nos of stainless steel fastner of suitable size no extra payment will be allowed to contractor in this regard. (ii) Old geyser to be deposited in MES store yard.

Supply & fixing CPVC pipes 20mm dia SDR-11 & plain CPVC SDR-11 with all fittings on wall/ceiling or laying in floor/wall complete with proper steel saddling of half meter apart of each complete all as specified and directed by Engineer-in-Charge

Supply & fixing quarter turn bib cock with flange,fancy type,cast brass with chrome finish crutch or butterfly handle ,screwed down ,screwed for iron pipe/CPVC pipe or for brass ferrule and fixed for size 15mm bore complete all as specified and directed by Engineer-in-Charge

Supply & fixing quarter turn angle cock with flange 15 mm dia cast brass with chrome finish plate screwed down high pressure,fancy type,with long shank and cup(connected type),screwed both ends for iron pipe/CPVC pipe complete all as specified and directed by Engineer-in-Charge

Supply & fixing geyser PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specified and directed by Engineer-in-Charge

Supply & fix PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed by Engineer-in-Charge.

Supply & fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement metal body exhaust fan, AC single phase 230/240V of size 300 mm sweep with net frame including making hole of suitable size/ alteration to the existing hole to fix the exhaust fan complete all as specified and directed by Engineer-in-Charge. ( Note: Old unserviceable exhaust fan will be deposited in MES store yard).

Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through and including PVC conduit ISI marked with accessories and 4 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engr-in-Charge. (Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)

Supply & fix in replacement energy saving, evironment friendly, long life, corrosion resistent, impact proof, Mini LED building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP 65 protection with LED 20 W light source including material and labour for suitable bracket made of 20 mm dia light grade GI pipe & MS clamps complete with nuts and bolts and washers complete all as specified and directed by Engineer-in-Charge.

Supply & fix Supply and fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 10 W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 20 W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting complete all as specified and directed by Engr-in-Charge.

upply & fix in replacement double door sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 triple pole and neutral 4 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and directed by Engr-in-Charge.

upply & fix in replacement double door sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 single pole and neutral 12 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and directed by Engr-in-Charge.

upply & fix in replacement double door sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 single pole and neutral 8 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and directed by Engr-in-Charge.

upply & fix in replacement double door sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 single pole and neutral 4 ways 415 volts powder coated complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of isolators, MCBs, etc. In distribution board of the following rating and capacities complete all as specified and directed by Engineer-in-Charge for following :-

MCB TPN 415 volts 63 Amps Capacity, 10 KA

MCB TPN 415 volts 100 Amps Capacity, 10 KA

MCB SPN of 240 volts 20/32/40 Amps Capacity, 'C' series, 10 KA

MCB SP of 240 volts 5-40 Amps Capacity, 'C' series, 10 KA

Supply & fix in replacement switch bell push, flush type, 5 Amp complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement, modular switch flush type, 6 Amp. SP, one way ,1 module complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement modular socket outlet, 3 pin, 6 Amp, flush type 2 module complete all as specified and directed by Engr-in-Charge

Supply & fix in replacement modular swicth, 16 Amp flush type 1 module complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement modular socket outlet, 3 pin, 6/16 Amp flush type 2 module complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement modular bell push, flush type, 6 Amp, 1 module complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of ceiling fan regulator 120 Watt 2 module Modular Type electronic step type 5 step 360 deg

Supply & fix in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of Ceiling rose 3 phase, PVC/ Polycarbonate body complete all as specified and directed by Engr-in-Charge.

Supply & fixing in replacement of LED Lamp, 7 W ,Type of capacity B22, wide operating Range 140V -280V, Input current 08mA- 30mA, lumen 180-300, UV and IR free light, color temperature 6500K, cool day light, up to 80 % Energy saving over GLS complete all as specified and directed by Engineer-in-Charge

Material & labour for earthing complete with galvanised steel earth plate electrode 60cmx60cm x 6 mm thick buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level connected to galvanised earth lead wire 4.0mmdia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion provn of GI protection pipe light grade of 32mm bore upto 7.5m length and connected earth wire to earthing test point all as shown in electrical plate No. 3 of SSR Part - I 2009 and as specified or indicated and testing on completion including necessary excavation & earthwork in any type of soil, PCC (1:3:6) type C1 chamber, precast slab 50mm thick in cement concrete (1:2:4)type B1 (rein forced with welded steel wire fabric (XPM) of weight not less than 4kg/sqm) with frame, funnel with watering pipe of 20mm bore medium grade, wire mesh and lugs test point etc complete all as specified and as directed by Engineer-in-Charge.

SARASWATI CONSTRUCTION

OM SREE MAHADEV TRADERS