System Improvement

De-centralized Material

PP Clamp, SP-23 with N&B

F Clamp, SP-23 with N&B

Stay Clamp, SP-23 with N&B

Stay Insulator

Earth Wire Clamp, SP-23 with N&B

Labour Charges

Safe cartage of following material from ESSC, New Tehri to roadside of work with loading & unloading at both ends dest. 174 Km.

(i) ST Pole, SP -23

(ii) 25 KVA T/F

(iii) Small line material (Per Qtl. per km. @ 05.00)

Head Load Cartage of following material from roadside to different worksites distance up to 0 to 01Km

(i) ST Pole, SP -23

(ii) 25 KVA T/F

(iii) Small line material (Per Qtl. per km. @ 05.00)

Head Load Cartage of following material from roadside to different worksites distance up to 1 to 03 Km

(i) ST Pole, SP -23

(ii) 25 KVA T/F

(iii) Small line material (Per Qtl. per km. @ 05.00)

Dismantling of Existed Channel from existed D/P for required fabrication

Febrication of MS Channal/Angle after cutting in required sige with drealing of holles.

Dismantling of existed single phase 11KV line with ACSR weasel Conductor without Earth Wire.

Dismantling of tilted ST Pole SP-23 with all accessories complete.

ST S/P, SP- 23

ST D/P, SP-23

Excavation, Digging & Errection of pit for size 0.9*0.9*1/6 Mtr. following Pole in boulder mixed soil, grouting in 1:4:8 cc in size 0.45*0.45*1/9 Mtr. Including fitting and Errection of all accosseries on pole.

(i) ST S/P, SP- 23

(ii) ST D/P, SP-23

Fixing of Channel after fabrication on existed D/P

Muffing of Poles with cc 1:3:6 block & 45cm hight from groung level including cost of ballast cement and sands etc.

Digging of pit for New& pulled out stay & erection with grouting 1:4:8 cement & concrete inculiding nozzling and binding complete.

Route clearance by cutting of tree/branches coming in the way of line complete. (Per Tree (LS)).

Errection and digging of Earth Rod 20x2500 mm & GI Wire 5 mm 6SWG of pole & substation body

Laying, stringing & resagging of 3P4W, 11KV line ACSR Rabbit Conductor inculiding Rejumpring and rebinding complete.

Providing Delta Earthing of T/f Neutral Point, Body & L.A. with 5 Nos. Earth Electrods 20x2500 mm & G.I. Strips of 25x3 Sq.mm Complete.

Dismantling of 16 KVA old & used T/F from Double Pole including opening in all connection

Mounting of 25 KVA T/f on D/P Structure with making HT/LT Connection complete.

Mounting & fixing of 11 KV Fuse set & 11 KV G/O switch complete.

Mounting & fixing of L.A. on Double Pole structure including making all conection by G.I. strip size 35x6 mm to eatrh point Complete work(Incuding cost of G.I.Strip)

Back Head Load cartage of old & used 16 KVA T/F from Sub-station site to road side

Safe back cartage of old & used 16 KVA T/F from nearest road side to storeRishikesh by pvt truck with loading & unloading both ends. Avg. dist. 150 km.

De-centralized Material

LT XLPE Cable 3C*35+25Sqmm

Connecting Cable AB 1*25 Sqmm

Suspension Clamp with I Hook (insulated) with nut bolt

Dead Clamp with I Hook (insulated) with nut bolt

LT inslation Piercing Connector for LT Section Pole

Connector AB Cable 35Sqmm to 35Sqmm

Line to line jumpring connector for mid span

Alu to Alu. Connector AB Cable 35 Sqmm to 35Sqmm

Alu to Alu. Connector AB Cable to LT Service Cable

Mid Span cable jointing sleve

Supply of heat sink end cap

Stay clamp, SP-10 with N&B

Stay clamp, SP-21 with N&B

Holding clamp for suspension and dead end clamp

Stay insulator

Distribution Box LT 3Ph with clamp

Distribution Box LT 1Ph with clamp

Al crimping lug 25sqmm

Labour Charges

Safe Cartage of following material from ESSC, New Tehri to roadside of different sites with loading, unloading & stacking at both ends distance upto 160 Km.

ST Pole SP-21

ST Pole SP-10

Small Line Material

Head Load Cartage of following material from roadside to different worksites distance up to 0 to 1.0 Km

ST Pole SP-21

ST Pole SP-10

Small Line Material

Head Load Cartage of following material from roadside to different worksites distance up to 0 to 3.0 Km

ST Pole SP-21

ST Pole SP-10

Small Line Material

Opening (Disconnection) & Reconnection of existing S/C by loop jumpring of main distribution line.

Dismantling of LT Line Span. for AB Cable

LT XLPE Cable 1Cx16+25 mm2

Dismantling of LT Rusted / Tillted Pole SP-10

Excavation, Digging of pit for size 0.9x0.9x1.5 Mtr. Following Poles in boulder mixed soil, grouting in 1:4:8 cc in size 0.45x0.45x1.5 Mtr. Including fitting and Errection of all accosseries on pole.

ST Pole, SP-10

ST Pole, SP-21

Excavation, Digging of pit for New stay 0.6*0.6*1.5 mtr. with grouting of all work Cement concreet in sige 0.6*0.6*0.3 mtr. Ratio 1:4:8 block with fixing, nozzling & binding complete.

Excavation, Digging of pit for Pulled out stay 0.6*0.6*1.5 mtr. with grouting of all work Cement concreet in sige 0.6*0.6*0.3 mtr. Ratio 1:4:8 block with fixing, nozzling & binding complete.

Errection, Resagging & commissioning of following size of insulated Arial Bunched Cable. --

LT XLPE Cable 3Cx35+25 mm2

Fixing of distribution box including making of all connection complete work

Erection of Mid Span cable Jointing sleve

Erection of Heat Sink End Cap

Back head load cartaze of received materil against following detail.

AB Cable Scrap, work side to Road Side (up to 01 Km.)

Back head load cartaze of received materil against following detail.

AB Cable Scrap, work side to Road Side (01 to 03 Km.)

Back cartage to store

AB Cable Scrap, work side to Road Side (up to 220 Km.)

M/S R. B. ELECTRICALS

Semwal Electrical Engineering Company