REPAIRS/REPLACEMENT OF ROLLING SHUTTERS, GALVALUME SHEET, FALSE CEILING AND OTHER MISC REPAIRS IN DOMESTIC AREA AT AF STN BHUJ

Amount

Taking down carefully un-serviceable/old rolling shutters of size exceeding 5 Sqm but n. exc 10 Sqm each, gear operative type for replacement of un-serviceable/defective parts, denting of various parts, cleaning of guide rails, laths, top cover by kerosene and proper greasing, oiling to make the system smooth/easy functional, repair to locking arrangements including supply and fix new nuts & bolts of existing size by removing old/rusted nut and bolts wherever required, necessary welding where ever required as directed, giving proper tension to the spring and refixing the shutter and gear box in the same opening after repair work carried out complete all as specified and as directed by the Engr-in-Charge.

All as per ser Item No.01 above but of Push and Pull or manual type

Taking down carefully old serviceable/damaged rolling shutter of any type complete and removing from the site.

S&F steel rolling shutters, factory made, with out ball bearing with thickness of laths 1.25mm push and pull or manual type inculding top cover, anchoring rod, hasp and staple with one shop coat of red oxide or zinc staple with one shop coat of red oxide or zinc chrome primer and fixed in position, in existing opening complete all as spd and directed.

All as per ser Item no. 4.00 above but gear operated type with bevel gear box and crank handle.

Taking down existing unserviceable / defective suspension shaft and S&F new suspension shaft not exc 3.50m in length alongwith helical wire spring or flat sprial of proper counter balancing the weight of shutter all as directed.

Taking down unserviceable/defective bevel gear box and S&F new bevel gear box in position with all necessary connected fittings complete all as directed and spd by the E-in-Charge.

S&F 1.25mm thick laths of steel rolling shutters without ball bearing including top cover anchoring rod, hasp & staple, push pull or manual type and one shop coat of primer in position all as directed.

Preparation of old steel painted surfaces of any description exc 10 cm with or girth and applying one coat of synthetic enamel paint, complete all as specified and dirtected.

Supply only hood cover made out of 1.00mm thick MS sheet.

Dismantling asbestos cement (corrugated, Semi corrugated ,etc ) sheets in roof coverings.

S&F Structural steel works as in tubular roof trusses, purlins, vertical posts, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular pipe, channel or flat sections) including distance pieces, cleats , MS plate, riveting incl bending and welding, conforming to Fe – 410W Gde E -- 250 quality A complete all spd and as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Mild steel works as in wind ties for roof including securing bolts, all necessary drilling etc and similar work conforming to Fe-290 Gde E-165

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

M&L anodised aluminium snap grid size of grid 605mm x605mm frame work made out of 0.5mm thick GI tee 32x24mm for main, 25x44mm for cross tee and 20x20mm angle fixed on wall , powder coated finish on exposed faces of tee and angle , hung from ceiling using 2mm thick GI suspension wires spaced of 1200mm on main runners for false ceiling complete all as specified and directed by EIC. all as specified

M&L for gypsum ceiling board for ceiling prepainted , matt finish, 600x600x12x15mm in size with preparation of approved brand/ make, laid over, grid work ro fixed with nails to any type of frame work or with staples on snap grid incl making niches for fan/light on ceiling purposes.

M&L Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame all as specified

Supply and fixing in repairs tank top cover (lid) white with locking arrangement complete of make : Sintex suitable for 500 ltr to 1000 ltr capacity all as specified and directed.

S&F in repairs rotational moulded polythene white water storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 500 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) (Make of tank - Sintex cat No CCWS 0050-02-TLW or equivqalent of makes given in Appendix 'B'to PS, Make of ball valve - Prayag Cat No - 153 or equivalent in Polytuff as approved by GE)

All as per item no 22.00 above but capacity 750 ltrs (Make of tank- Sintex cat No CCWS 0075-01-TLW or equivqalent of makes given in Appendix 'B'to PS)

All as per item no 22.00 above but capacity 1000 ltrs (Make of tank - Sintex cat No CCWS 0100-01-TLW or equivqalent of makes given in Appendix 'B'to PS)

Taking down chowkats or frames exc 1.5 sqm and n exc 4 sqm each with shutters (without taking off shutter from the frame) and removing to or from sore

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) and removing to or from store

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and removing to or from store.

S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as directed.

Providing and fixiing solid PVC double door frame of size 50mm x 95 mm with a wall thickness of 5 mm, made by jointing 3 Nos, hear bent PVC sheet 'C' channel of 5 mm foam sheet of sizes 35mm x 30mm x 25mm and 40mm x 35 mm x 40mm & 25 mm x 30mm x 35mm using solvent cement. The two side 'C' channel shall be reinforced with 19mm x 19mm MS square tusbe of 19mm gauge. All the three 'C' channel shall be fixed to flat baseof 5 mm PVC sheet with solvent cement. The profile shall be mitre cut at two corners and jointed by inserting 4 Nos. 150mm long brackets of 15 mm x 15mm MS suare tusbe inside the 19mm x 19mm square tubes. The door frame shall be fixed to the wall using 65/100 mm long MS screws throguh the frameby using PVC fasteners. A minimum of 8 Nos of screws to be sprovide for each vertical member & minimum 4 nos for horizontal member etc.

All as per Item no 29.00 above but single door frame of size 50mm x 47mm -ditto- all as directed by the EIC.

Providing and fixing 35mm thick factory made moulded door shutter consisting of solid core single leaf flush door of 30mm thichness, lipped with 15mm (5mm x 30 thick x 30mm width on one stiles and top reails & bottom rails. The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2 raised panel design in different plain and 2mm plain coloured PVC sheet on other side using rubber adhesive on flush door & solvent cement adhesive on the PVC lipping etc., complete as per direction of Engr-in-Charge, manufacturer's specification and drawing.

Providing & fixing 30mm thick factory made wiremesh solid PVC door shutter consisting of frame made out of 19 gauge thickness & size of 19 mm x 19mm of style and 15mm x 15mm for top, lock and bottom rails. And in addition one veritical member throughout in between styies. MS frame shall be covered with 5mm thick heat moulded PVC 'C' channel of appropriate sixe 15mm wide PVC sheet beading is to be stuck internally in the back side of stiles and ralls of door with solvent cment adhesive. So that the wiremesh can be fixed properly. The wiremesh solid shutter have PVC sheet to match the sutter of PVC moulded shutter etc.

S&F in repairs Fatory made PVC Internal door Frame of the size 120mmx50mm (double door Frame) with a wall thickness of 5mm PVC Celuka Sheet of density 600Kg/Cbm manufractured by an ISO-9000 certified company, made out of extruded 5mm PVC Celuka sheet, mitre cut at two corners and joined with two Nos, of 150mm long brackets of 15mmx15mm M.S Square tube. The two vertical door profiles are to be reinforced with 20mm x20mm M.S tube of 19 guage throughout the frame. The door frame shall be fixed to the wall using 65/100mm long M.S screws through the frame by using PVC Fasteners. A minimum of 4 Nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc complete as per manufractures specification and direction of Engr-in-charge

S&F in repairs 30mm thick factory made internal PVC one side Prelem door shutter wood Free consisting of frame made out of M.S tubes of 19 guage thickness and size of 20mm x 20 mm for stiles as well as top bottom & lock rail. The inside panel shall consist of 20mm thick multi chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement adhesive with 5mm (+0.5) thick prelam PVC sheet of the inside panel. All the four edge of the panel to be sealed with lipping of 10mm thick & 20 mm wide PVC sheet baton(made by sticking 2Nos. rigid foam PVC sheets of 5mm (+0.5) thickness using PVC solvent cement adhesive. 20mm thick (5mm x 4 Nos) Thick PVC sheet to be given for lock provision at lock provision at lock height. Complete as per direction of Engr-in-charge, manufractures specification and drawing.

S&F in repairs 30mm thick factory made wire mesh solid PVC door shutter consisting of frame made out of M.S tubes of 19 guage thickness and size of 20mm x 20 mm for stiles and 15mm x 15mm for top, lock & bottom rails. 20mm x 20mm M.S square tubes shall be covered with 5mm thick heat moulded Rajshri PVC 'C' channel of size 30mm thickness, 90mm width out of which 75mm shall be flat and 15mm shall be PVC beading on either side forming stiles & 5mm thick 115mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be PVC beading on the inner side to from top and bottom rail and 130mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be PVC beading on from lock rail 10mm (5mm x2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panel will be Alumunium wire mesh fitted in by 'C' channel of size 35mm x 10mm on the eitherside in stiles. The inner side 'C' channel is fixed by 20mm x 20mm M.S. tube on both sides with screws. The wire mesh in top, bottom & lock rail is sealed with total 8 Pars of 15mm x 15mm & 20mm x 20mmtube with Aluminium wire 10mm (5mm x 2) thick PVC strip of 25mm width is to be stuck & nails on both side of Aluminium wire mesh interior at the top, bottom & lock rail. Complete as per direction of Engr-in-charge, manufractures specification and drawing

M&L for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out of JINDAL/ INDAL anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle, 75mm long tower bolt and anodised aluminum fittings such as stay, 75mm long Butt hinges glazing with 5 mm thick tinted sheet glass fixed with Solar control film 25 micron reflective type (gareware sun control or equivalent) and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) all as specified and directed.(Tint of glass shall be approved by GE) Note :- Aluminium grill fixed under above item shall be measured and paid separately

Supply only anodized aluminium grill (diamond shape of approx size 100x100mm) made out of aluminium 'Y' section as approved by Engr-in-Charge for window/ ventilators etc complete all as specified and directed.

Supply only in repairs Tower bolt 150mm long

Supply only in repairs ''T' Hinges light wt 100mm long

Supply only in repairs Curtain Brackets Aluminium with Aluminium 'L' Type

Supply only in repairs Curtain Brackets fancy type Brown colour

Supply only in repairs Curtain Rod Fancy type Brown colour

Supply only in repairs Kitchen cabinets drawer channels No-14

Supply only in repairs Kitchen cabinets drawer channels No-16

Supply only in repairs Kitchen cabinets drawer channels No-18

Supply only in repairs Door Seal

Supply only in repairs Capsule Door Closer

Supply only in repairs Wooden Batten Patti

Supply only in repairs Glass Putty complete.

Supply only in repairs Magnet No.01

Supply only in repairs SS Fancy decorative Brackets with 'L' brackets

Supply only in repairs SS Curtain Rod 25mm

Supply only in repairs Butt Hinges 75mm long

Supply only in repairs PVC Bib Tap 15mm dia

Supply only in repairs PVC Stop Cock 15 mm dia

Supply only in repairs G.I Socket 15mm dia

Supply only in repairs G.I Nipple 15mm dia 75mm long

Supply only in repairs G.I Nipple 15mm dia 100mm long

Supply only in repairs 32/40mm dia Waste Pipe PVC

Supply only in repairs Anglo Indian Toilet Seat Cover

Supply only in repairs Kitchen Sink coupling S/S 32mm

Supply only in repairs Wash Basin Coupling 32mm PVC

Supply only in repairs CPVC 'L' Blow 20mm dia

Supply only in repairs CPVC MT 20mm dia

Supply only in repairs CPVC MT 25mm dia

Supply only in repairs CPVC FT 25mm dia

Supply only in repairs Flush tank Ball valve set

Supply only in repairs Grey PVC fitting bush 40/50mm

Supply only in repairs Grey PVC fitting bush 50mm FT

Supply only in repairs Grey PVC fitting bush 40mm 'L' Blow

Supply only in repairs UPVC FT 15mm

Supply only in repairs UPVC FT 20mm

Supply only in repairs UPVC Tee 25mm

Supply only in repairs UPVC Reducer Socket 15/20mm dia

Supply only in repairs UPVC Reducer Socket 20/25mm dia

Supply only in repairs UPVC Reducer Socket 15/25mm dia

Supply only in repairs CPVC 15/20 brass 'L' Blow

Supply only in repairs UPVC 15/20 brass 'L' Blow

Supply only Solvent cement heavy duty solution 100ML

Supply only White Cement

Supply only in repairs SS Grating 150mm dia with holes

Supply only in repairs UPVC L Blow 15mm

Supply only in repairs UPVC L Blow 20mm

Supply only in repairs UPVC L Blow 25mm

Supply only in repairs UPVC T 15mm

Supply only in repairs UPVC T 20mm

Supply only in repairs UPVC T 25mm

Supply only in repairs UPVC Socket 15mm

Supply only in repairs UPVC Socket 20mm

Supply only in repairs UPVC Socket 25mm

Supply only in repairs UPVC MT 15mm

Supply only in repairs UPVC MT 20mm

Supply only in repairs UPVC MT 25mm

Supply only in repairs UPVC FT 15mm

Supply only in repairs UPVC FT 20mm

Supply only in repairs UPVC FT 25mm

Supply only in repairs UPVC 15mm dia pipe

Supply only in repairs UPVC 20mm dia pipe

Supply only in repairs UPVC 25mm dia pipe

Supply only in repairs CPVC MT 15 mm

Supply only in repairs CPVC FT 20 mm

Supply only in repairs CPVC Socket 20 mm

Supply only in repairs CPVC Socket 25 mm

Supply only in repairs UPVC L Blow 20mm

Supply only in repairs UPVC L Blow 25mm

Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer.

S & F 75 mm size Butt hinges medium weight cold rolled mild steel and fixed.

S&F 150mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F Aluminium handles, cast type, anodized 150 mm size comp ISI Marked

S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 250mm long.

S & F of 150 mm size (Overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S&F small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including MS butt hinges, medium weight, cold rolled 50mm long, articles n exc 200 Cu cm each of Ist class soft wood.

S&F mild steel, 300 mm long ordinary helical door spring incl roller and roller plate complete

SHREE BHANU ENTERPRISE