SPL REPAIR FOR CONVERSION OF OVERHEAD EXTERNAL ELECTRIC LINE TO UNDERGROUND LINE AT 46 AD REGT AND PROVN OF EXTERNAL WATER SUPPLY FOR 297 FD WKSP COY AND KHARI ROHAR AT GANDHIDHAM MIL STN UNDER GE ARMY BHUJ

Amount

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc for laying of cables, erection of poles, struts/ stays etc not exceeding 10 sqm on plan and getting out in soft loose soil complete all as specified and directed.

Returning, filling in, including spreading leveling watering and well ramming in layers not exceeding 25 cm in any type of soil complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 m and depositing where directed, at a level not exceeding 1.5 m above the starting point in soils complete all as specified and directed.

M & L for sand filling in trenches for cushioning of LT cables punning after filling complete as specified and as directed. Note: Punned thickness shall only be measured and paid

Supply and lay un-reinforced precast concrete cable cover , class , LV , Type I flat size 250 x 150 x 40 mm laid dry in treches over under ground cables complete all as specified and directed.

S & F GI pipe, light grade, of size 50 mm dia including necessary fittings laid in trenches/fixed on wall/pole for LT cable protection and taking down the old GI pipe, complete all as speicifed and directed for cable protection.

S & F GI pipe, light grade, of size 40 mm dia including necessary fittings laid in trenches/fixed on wall/pole for LT cable protection and taking down the old GI pipe, complete all as speicifed and directed for cable protection .

Dismantaling of any type and size ACSR conductor complete all as specified and directed.

Dismantaling of stay assembly including demolation of concrete etc complete all as specified and directed.

Dismantaling of insulator any size and any type complete all as specified and directed.

Dismantaling of cross arm of MS chanel or angle sections any type any size etc complete all as specified and directed.

Disconnecting, taking out, removing old existing unserviceable LT cable overhead service cable of any size etc complete all as specified and directed.

Supplying ,Laying , jointing and testing XLPE insulated, armoured, heavy duty, LT aluminum conductor cable 1100 volts grade of size 4 core 16 Sqmm laid in trenches/ducts, floors, fixed to walls etc complete all as specified and directed.

- ditto- here in before Item 13 but of size 2C core 10 Sqmm

- ditto- here in before Item 13 but of size 4C core 25 Sqmm

- ditto- here in before Item 13 but of size 3.5C core 35 Sqmm

- ditto- here in before Item 13 but of size 3.5C core 120 Sqmm

- ditto- here in before Item 13 but of size 3.5 core 95 Sqmm

- ditto- here in before Item 13 but of size 3.5 core 150 Sqmm

Supply, installation, testing and commissioning CPRI approved weather and vermin proof LT Panel box factory fabricated out door cubicle type (KIOSK type ) , front and back openable , air vent , totally enclosed outer cage made out of 3 mm thick sheet metal and inner compartments of 2.0 mm thick sheet metal enclosure with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement with pad lock consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber /wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated internally/ externally of approved colour with PCC foundation and civil work and copper bus bar for 3 phase & neutral mounted on epoxy insulator-01 Set including sleeves as per colour coding and connecting the following complete all as specified and directed :- Main LT panel near transformer

Outgoing (a) MCCB 4 Pole thermal magnetic release 415 volts 160A 36 KA-01 (b) MCCB 4 Pole thermal magnetic release 415 volts 200 A 36 KA-01 (c) MCCB 4 Pole thermal magnetic release 415 volts 63 A 36 KA-04 (d) MCB SPN 32 A-3 (e) Automatic timer panel of capacity 5KW

Supply, installation, testing and commissioning CPRI approved weather and vermin proof LT Panel box factory fabricated out door cubicle type (KIOSK type ) , front and back openable , air vent , totally enclosed outer cage made out of 3 mm thick sheet metal and inner compartments of 2.0 mm thick sheet metal enclosure with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement with pad lock consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber /wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated internally/ externally of approved colour with PCC foundation and civil work and copper bus bar for 3 phase & neutral mounted on epoxy insulator-01 Set including sleeves as per colour coading and connecting the following complete all as specified and directed :- (LT Panel-1 near Hertiage Bldg)

Outgoing (a) MCCB 4 Pole thermal magnetic release 415 volts 63A -4 (b) MCCB 4 Pole thermal magnetic release 415 volts 25A -4

Supply, installation, testing and commissioning CPRI approved weather and vermin proof LT Panel box factory fabricated out door cubicle type (KIOSK type ) , front and back openable , air vent , totally enclosed outer cage made out of 3.15 mm thick sheet metal and inner compartments of 2.0 mm thick sheet metal enclosure with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement with pad lock consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber /wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated internally/ externally of approved colour with PCC foundation and civil work and copper bus bar for 3 phase & neutral mounted on epoxy insulator-01 Set including sleeves as per colour coading and connecting the following complete all as specified and directed :- (Near JCO Mess )

Outgoing (a) MCCB 4 Pole thermal magnetic release 415 volts 63A -4 (b) MCCB 4 Pole thermal magnetic release 415 volts 25A -4 (c) MCB SPN 32 A-4 Nos

Supply, installation, testing and commissioning CPRI approved weather and vermin proof LT Panel box factory fabricated out door cubicle type (KIOSK type ) , front and back openable , air vent , totally enclosed outer cage made out of 3.15 mm thick sheet metal and inner compartments of 2.0 mm thick sheet metal enclosure with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement with pad lock consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber /wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated internally/ externally of approved colour with PCC foundation and civil work and copper bus bar for 3 phase & neutral mounted on epoxy insulator-01 Set including sleeves as per colour coading and connecting the following complete all as specified and directed :- (Near Budha Chowk )

Outgoing (a) MCCB 4 Pole thermal magnetic release 415 volts 25A -3 Nos (b) MCB SPN 16 A-1 Nos

M&L , earthing complete for machinary / Equipment installed at power house / sub station with galavanised steel earth plate electrode of size 60 cmx 60 cmx 6 mm thick buried directly in ground ( earth pit not less then 2.25 m deep below the normal ground level ) with top edge of the earth plate not less then 1.5m below normal Ground level connected galvanised earth strip 32X6 mm by means of bolts, nuts, washerws and check nuts all shown in electrical plate No.5 of SSR Part- I connected to main board / disribution board complete .Earthing GI lead and GI protection pipe 15 mm dia light grade upto 7.5 m from earth pit connecting to machinary/ equipment, testing point complete all as specified and directed.

Note :- (i) The unit rate shall also included for earth work in hard /dense soil , PCC type C-I (1:3:6) chamber , PCC 1:2:4 type B-I cover 50 mm thick reinforced with 8 mm dia TMT bars,150 mm c/c both ways, funnel with watering pipe 20 mm dia medium graded , GI protection pipe light grade 15 mm dia and wire mesh complete in addition to items No. 1(a) to (e) of preamble (notes) under sub heading earthing specified on SI page No. 389 of SSR Part - II. (ii) Earthing strip and GI protection pipe beyond 7.5 mtrs will be measured and paid separatelly if required under appropriate Schedule.

Note :- (i) Earthing shall be tested as specified in casul 19.137 of SSP PART - I 2009 , to the entire satisfication of Engr-in-Charge. (ii) On teting after complataion of earthing , if the desired earth resistance is not obatined the earthing wiil be re done by the contractor at his on risk and cost to the entire satisfaction of the Engr - in - charge.

M&L for road cutting of any thickness with depth of 0.6m depth and 0.1m width and laying of pipe and drawing cable and PCC 1:3:6 for road cutting complete all as specified and directed.

Supply and Fixing in any length UPVC pipe 20 mm dia pipe manufactured as per ASTM-D-1785 as per IS-559, Schedule-40 complete with fittings, laid in trenches in required length complete all as specified and directed Note :Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid in trenches

All as per item 26 above but 25 mm dia bore

All as per item 26 above but 40 mm dia bore

All as per item 26 above but 50 mm dia bore

All as per item 26 above but 80 mm dia bore

S&F Cast iron gate /sluice valve of size 150 mm dia stainless steel stem PN- 1.6 ((Flanged) conforming to IS 14846 alongwith hand wheel operated complete all as specified and directed. Make - Zoloto/Kirloskar/Kartar

S&F Cast iron gate /sluice valve of size 100 mm dia stainless steel stem PN- 1.6 ((Flanged) conforming to IS 14846 alongwith hand wheel operated complete all as specified and directed. Make - Zoloto/Kirloskar/Kartar

S&F Cast iron gate /sluice valve of size 80 mm dia stainless steel stem PN- 1.6 ((Flanged) conforming to IS 14846 alongwith hand wheel operated complete all as specified and directed. Make - Zoloto/Kirloskar/Kartar

S & F in repair UPVC Ball valves with operating handle (stop valve) of size 20 mm dia complete suitable for fittings with ASTM - 1785, Schedule 40 UPVC pipes complete all as specified and as directed.

All as per item No.34 here in above but of size 25 mm dia complete all as specified and directed.

All as per item No.34 here in above but of size 50 mm dia complete all as specified and directed.

Supply only D joint CI complete with all accessories suitable for 100 mm bore any pipe line complete all as specified and directed.

Supply only D joint CI complete with all accessories suitable for 80 mm bore any pipe line complete all as specified and directed.

Rotational moulded polyethylene water storage tanks 1000 ltr capacity(cylindrical vertical with closed top) hoisted and fixed in position all as specified (Note :The rates for ‘Hoisting and Fixing’ tanks include for hoisting into position either inside or outside of building, connecting up pipes, securing access covers etc)

S & F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

M&L for Construction of block masonery valve pit chamber of size 900 x 900 x 900 MM (internal dimension) (above GL 0.30 mtr) suitable for fixing of sluice valves, 15cm thick foundation using PCC 1:4:8 type D-2 over 15cm thick hardcore of broken stone, 23cm thick brick walls built in cement and sand mortar 1:4, 10mm thick internal and external plaster including top of floor in cement and sand mortar 1:6, 10mm thick, finished even and smooth, without using extra cement, 3 mm thick plate cover on 50mm x 50mm x 6mm MS angle frame embeded in PCC 1:2:4 type B-1coping, having rectangular, hinged, opening of size 150 x 100mm with locking arrangements ,hold fasts, etc, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil including disposal of debris outside MD land complete all as specified and directed.

Excavation in trenches in soft / loose soil nexc 1.5 mtr wide and not exc 1.5 m in depth etc complete and getting out in soft soil inciuding trimming sides and bottom of trenches complete all as specified and directed.

Rentring filling in trenches including watering and well ramming in layer not exc 25 cm thick in soft/ loose soil complete all as specified and directed.

Removing excavated surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Cutting hard standing /road cutting for laying of pipe and making surface good with PCC 1:3:6 complete all as specified and directed. (Note : Make good surface match with existing after finish the work)

M&L for cutting of existing DI/CI pipe line in position for rectifying leakage and reducing to required length, in position, for insertion of collars or other fittings including necessory excvation and earthwork, dewatering etc,if any involed, complete all as specified and directed for 50 / 100 mm bore of pipes

Supply and fixing cast iron foot valve flanged end of size 80 mm dia with all fitting and accessories complete all as specified and directed. Make- Kirloskar/zoloto /Kartar

Supply and fixing cast iron foot valve flanged end of size 100 mm dia with all fitting and accessories complete all as specified and directed. Make- Kirloskar/zoloto /Kartar

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.

Anil Builders (BID ID -3492251)

ANAND ENTERPRISES (BID ID -3491884)

Ashok Electric and Electronics (BID ID -3487152)

JYOT ENTERPRIES (BID ID -3498732)

Abhishek Enterprises (BID ID -3497946)