SPL REPAIRS TO SAFETY EQUIPMENTS SECTION AND CPA HANGAR INCLUDING BR MAJOR REVENUE MINOR WORKS AT AF STN NALIYA

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & as directed.

Demolition of cement concrete (unreinforced) in ground floors, and pavings n.exc. 15 cm thickness (below or above GL) including removal of debris to out side MD land complete all as specified & as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding; removing serviceable tiles to store and rubbish off the premises to outside MD land complete all as specified & as directed.

M&L joint free Non skid ceramic coloured tiles 7mm to 8 mm thick (square /rectangular )size of tiles 400X400 mm in floors over 15mm thick in CM 1:4 over 25mm thick cement concrete type B-0, 1:2:4 (by using 12.5mm graded stone aggregate) etc . set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified & directed.

M&L Coloured Glazed ceramic tiles (300x200mm) x 7mm thick, vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick CM backing coat set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & directed.

S&F MS FI 50x5 mm thick wind ties for roof including securing bolts complete all as specified & as directed.

S&F PVC valve less syphonic action type flushing cistern of 10 lit cap low level with inlet ball valve, float & handle incl brackets, flush pipe as reqd at site complete all as specified & as directed.

S&F in repair vitreous china wash basin, white flat back, size 450x300mm including brackets, cutting for and pinning in ends of brackets or erecting stand incl 15mm bore, pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated. PVC connection with PTMT nuts 15mm dia 45cm long and 32mm dia PVC waste pipe and CP coupling complete all as specified & as directed.

S&F vitreous China wash down water closet pan (pedestral pattern) EWC including PVC seat cover closed pattern with hinging device and with jet spray with one metre long flexible pipe,all fittings complete all as specified & as directed.

Taking down or up steel tubing 15mm bore and S&F 16 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified & as directed.

Description all as per Srl item No.12 here-in-before but 20mm bore and Supplying and laying 20 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified & as directed.

Demolition and dismantling of PCC of any description and in any position not otherwise specifically provided including removing debris foutside MD land complete all as specified & as directed.

S&F For pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm (TCT) thick of any colour having tensile strength of 550 Mpa as in roof ridge covering/cladding to wall, fixed with self tapping screws complete all as specified & as directed.

S&F For pre- painted galvalume aluminum zinc coating GI based trapezoidal profile sheet 0.50mm thick (TCT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

Fixed in repairs for pre- painted galvalume aluminum zinc coating GI based trapezoidal profile sheet 0.50mm thick (TCT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.

Labour Only For levering up edges of old plain or corrugated steel sheets (end or side) fixed to wood or steel framing, inserting end or side edge of new and nailing, screwing, bolting or riveting including making good the joint between old and new sheets complete all as specified & as directed.

M&L for Closing bolt holes etc. in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length complete all as specified & as directed.

Taking down cement plaster on brick or stone wall etc including ranking out joints hacking for keys scrubbing down with water and removing rubbish to outside MD land and M&L for rendering 10mm thick in cement mortar 1:6 and 2nd coat of 5mm thick in cement mortar 1:4 with water proofing compound on external wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified. Note: WPC shall be measured & paid saperately under relavant item as supply only.

M&L for rendering 10mm thick in cement mortar 1:6 on internal wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified & as directed.

M&L Preparation of new plaster surface of wall and applying two coat of oil bounds distemper over one coat of alkali resistant primer complete all as specified and as directed

Preparation of old decorated surface of wall by washing rubbing down and stopping of old surface and applying two coat of oil bounds distemper complete all as specified and as directed

Supply and fix 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) "T" of any radius complete all as specified and as directed.

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290, Gde E-165 complete all as specified & as directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290, Gde E-165 complete all as specified & as directed.

M/L for PCC 1:3:6 type C1 using 20mm graded aggreagate in CM 1:6 as in bed blocks and hold fasts complete all as specified & as directed.

S&F For Pre-cast cement concrete block masonry with solid blocks casted in PCC 1:3:6 type (by using 20mm graded aggregate) exc. 10 cm in width and setting in mortar, type C1 1:3:6(20 mm graded agg) in CM 1:6 including demolition and removing debris to outside MD land complete all as specified and as directed.

M&L For Cement concrete type B1 (1:2:4, using 20mm graded aggreagte )in surface channels and drains complete all as specified and as directed.

M&L for applying two coat of synthetic enamel paint on new steel surface over a coat of red oxide primer incl preparation of surface of any description over 10 cm width or girth complete all as specified & as directed.

S&F Nylon net of bird proofing for shed / storage accn/ soft pen and possess following properties: a) The brust strength up to 44 pounds b) Shall meet ISO 1806 protocols. c) 3/4 " (Three Fourth inch), Messs netting. d) Thickness 0.071" thick(6 SDtrands each 0.012" Thick). e) Quality control- filments: are twisted and knotted pressure stretched and tughtened. f) break strength: 52 lbs/2316 kgs per strand. g) chemical properties-polythylene, a parffin hydrocarbon, is chemically insert, flame retardant and highly resistant to most chemicals at temperatures. h) High resistant to acids and alkaloids at all concentrations. i)High temperature-210-239 Degree, F/100-115 Degree. j)Low temperature-139 to 166 degree, F/-95 to 110 DegreeC. Including all fitting such as rolling pully, Iron strips, rope for cotrolling net, nails etc. all as specified and directed by engineer in charge.

Removal of demolished building materials etc. (other than soil) to outside MD land compound complete all as specified & as directed. Note: One metric tonne shall mean 'One Laod'.

M&L for Precast reinforced cement concrete cover slab in 1:2:4, type B-1 (by using 20mm graded stone aggregate ) as in manhole cover slabs set in cement mottar 1:6 including formwork complete all as specified & as directed.

S&F Mild steel deformed round TMT bars 10 mm dia and over cut to length bent to shape required icluding cranking,bending spirally for hooping for coloumns,hoccking ends and binding with and including mild steel wire annealed ) not less than 0.9 mm dia or securing with clips complete all as specified & as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified & as directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded crushed broken stone aggregate) as in foundations filling & mass concrete complete all specified & as directed.

M&L PCC 1:2:4 type B-2 (40mm gradedstone aggregate) as in foundation complete all as specified & as directed.

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats,gusset plates,wind ties etc of Fe410- W(GdeE-250) quality-B complete all as specified & as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long Diameter of neck 11 to 15 mm complete all as specified & as directed.

S&F steel work in tubular trusses 80 mm thick medium class pipe incl special shaped washer etc.complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade st 240 complete all as specified & as directed.

Removing excavated materials to outside MD land and depositng complete all as specified & as directed.

Excavating over areas, n. exc 1.5 m deep and getting out in soft/ loose soil complete all as specified & as directed.

Excavating over areas, exc 1.5 m but n exc 3.0 m deep and getting out in soft/ loose soil complete all as specified & as directed.

Excavating over areas, exc 3.0 m but n exc 4.5 m deep and getting out in soft/ loose soil complete all as specified & as directed.

Excavating over areas, exc 4.5 m but n exc 6.0 m deep and getting out in soft/ loose soil complete all as specified & as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

M & L for Cement concrete type C2 1:3:6 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified & as directed.

M & L for Pre-cast cement concrete block masonry with solid blocks of casted in plain cement concrete 1:5:8, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified & as directed.

M & L for Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified & as directed.

M & L for Loose filling with aggregates of gauge 40 to 80 mm in soakage pits, soakage wells complete all as specified & as directed.

M & L for RCC Type B1 1:2:4 (20mm graded aggregate) in Slabs supported on walls complete all as specified & as directed.

Use and waste Formwork to soffits of suspended slabs such as roof slabs not exceeding 200mm thick for rough finished surface complete all as specified & as directed.

Use and waste Formwork to sides of RCC slab exc 10cm but n exc 20cm wide for fair finished surface.

S & F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified & as directed.

S & F Cast iron work grade FG 150, unmachined, in manhole covers complete all as specified & as directed.

S & F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & as directed.

S & F 75mm dia PVC (SWR) vent cowl complete all as specified & as directed.

M&L for RCC Pipe 150 mm dia grade NP-2 laid to slope in trenches jointed in CM (1:1) and tested complete of size 150mm internal dia of pipe complete all as specified & as directed.

M&L for Cement concrete bed to drain pipes of 150mm dia (1:3:6) type C2 using 40mm graded aggregate incl packing under and haunching againest sides of pipes after they are laid and tested complete all as specified & as directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & as directed.

M&L hardcore of gauge nexc 63mm deposited spread and levelled in layers nexc 15cm thick watered and rammed to a true surfaces complete all as specified & as directed.

M&L 100mm thick Cement concrete type D2 1:4:8(40mm graded stone aggregate) over hardcore complete all as specified & as directed.

M&L 75 mm thick PCC 1:2:4 type B2 (40mm graded aggregate) in floor finished even and smooth with spikes rolling to to surfaces or making impressions of expanded metal, whilst the concrete is green including forming 5mm thick expansion joints complete all as specified & as directed.

Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed andsealed with sealing compound, Grade ‘B’ complete all as specified & as directed.

S&F aluminum frame fixed partition with 12 mm thick prelaminted particle board exterior grade,prelaminated one side with decorative choice lamination and other side balancing white lamination for bottom panels and top panels with 6mm thick tinted glass and frame work shall be of panel not less than 0.8(section to be used for bottom rail,middle rail and other members shall be of 150 x44x3 mm,125x44x3 mm and 44x44x3 mm respectively) including joining cleats for fixing,cleats,rubber beading and aluminium beading,padding accessories as required complete all as specified and directed.

Cutting opening in cement concrete walls for ther opening (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, complete all as specified & as directed.

S &F Plates or chequred ) channels, square cut or notched (ordenry or counter sunk) forming holes with rivetted, bolted, or welded attachment conforming to grade Fe -410 complete all as specified & directed

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified & as directed.

Supply and fix collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified & as directed.

M&L Machine cut kota stone slab flooring 18-20 mm thick over 15 mm thick cement screed base in CM 1.6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing at site complete all as specified.

S & F Rolled sections as in main & cross beams, hip & jack rafters, purlins where connected to common rafters & running rails & guides for sliding doors, fixed with angles cleats or other connecting plates of Gde Fe 410-W (Gde- E-250) Qty-A complete all as specified & as directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc and getting out in Hard/dence soil complete as specified and directed.

Use and waste the form work to sides of concrete fdn, footings plinth beam etc, vertical or to batter complete all as specified & as directed.

M & L RCC 1:2:4 type B1 as in foundation footings, foundation beam,plinth beams and bases of columns basement slabs, and mass concrete complete all as specified & as directed.

Use and waste the form work to sides and soffits of floor or roof beams, beam, lintels, cantilevers etc, fair finished surface complete all as specified & as directed.

M&L RCC 1 : 2 : 4 Type B1 ( 20 MM graded aggregate) as in beams, cantilevers , bressummers, lintels over 1.5 m span complete all as specified & as directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified & as directed.

M&L RCC 1 : 2 : 4 Type B1 ( 20 MM graded aggregate) as in chajjas etc. complete all as specified & as directed.

S & F TMT steel bars 5 to 10 mm dia in stirrups, spacers and binders complete all as specified & as directed.

M & L Sand filling under floors or in foundations including watering and consolidation complete all as specified & as directed.

M & L 75 mm thick PCC 1:4:8 Type D-2 ( 40 mm graded aggregate) as in sub base to floors complete all as specified & as directed.

M & L 40 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded aggregate ) without using extra cement finishing cement concrete surface even and smooth complete all as specified & as directed.

M & L 15mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 to be finished even and smooth without using extra cement complete all as specified & directed.

Demolition of Brickwork or stone/ boulder masonry, laid dry complete all as psecified.

Dismantling boarding, any description, fixed in any position with nails complete all as specified & as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified & as directed.

M&L for preparation of old decorated surface of wall by washing rubbing down and stopping of old surface and applying one coat of oil bounds distemper complete all as specified and as directed

M & L for Preparation of old decorated surface of Ceiling and applying one coat of white wash on Ceiling complete all as specified & as directed.

M & L for Preparation of newly plastered surfaces of wall and applying three coat of white wash on wall complete all as specified & as directed.

M & L for Preparation of old decorated surface of wall and applying one coat of white wash on wall complete all as specified & as directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15mm thick for laying floor finishes etc in cement mortar 1:6 complete all as specified & as directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surface as skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match on 10mm thick 1:4 backing coat complete all as specified & as directed.

M & L for mild steel TMT bars 6mm to 8mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for column hooking end complete all as specified & as directed.

Supply only integral water proofing compound (ISI marked) complete all as specified & as directed.

Taking down chowkat with shutters (without taking off shutters from the frames) of any description exc 1.5 sqm and not exc 4.0 sqm in each panel complete all as specified & as directed.

Taking down shutters of any description exc 1.5 sqm n exc 4 sqm in each panel complete all as specified & as directed.

S&F Rough cast wired glass, 6.4mm thick and glazing with oil putty in square area exc 0.75 but not exceeding 1.0 sqm, complete all as specified & as directed.

M&L anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm, Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions, Preparation of new surfaces of ceiling boards with chalk whiting and applying two coat of oil bound distemper complete all as specified all as specified.

M&L for applying one coat of synthetic enamel paint to old Steel surface incl preparation of surface of any description over 10 cm width or girth complete all as specified & as directed.

M&L For anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified specified all as specified.

M&L for anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

M&L for anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.

M & L providing and injecting chemical imulsion for post constructional anti termite treatment along external wall below concrete or masonry apron using camical emulsion @ 2.25 litres per RM by drilling 12mm dia holes up to 300mm deep and 300 centre to centre including pluging holes complete all as specified & as directed.

M & L for providing and injecting chemical emulsion for post Constructional Anti-termite Treatment along external walls below concrete or masonry apron using chemical emulsion @ 2.25 litres per RM by drilling 12mm dia holes up to 300mm deep and 300 centre to centre including plugging holes complete all as specified & as directed.

M&L For cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified & as directed.

M&L For priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2, APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified & as directed.

M&L for cement concrete 200mm thick type B-1, 1:2:4 (by using 40mm graded aggregate) as in floor finish complete all as specified & directed.

M&L for FE 410-W (Gde-E-250) quality-A, plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified & as directed.

S&F nuts bolts M 16x60 with spring washer complete all as specified & as directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of exterior cement base paint over a coat of primer complete all as specified & as directed.

M&L for ball bearing for vertical shafts, rolling shutters complete all as specified & as directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out hard/dense soil complete all specified & as directed.

M&L 75mm thick cement concrete type C-2, 1:3:6 (by using 40mm graded stone aggregate) for sub base as in plinth protection complete all as specified & as directed.

M&L cement concrete 75mm thick type B-2, 1:2:4 (by using 40mm graded stone aggregate) as in floor in finish complete all as specified & as directed.

Taking down carefully point wiring complete of any type (batten / surface conduit for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces complete all as specified and directed.

Taking down carefully sub main wiring complete of any type (batten/surface conduit complete and making good disturbed surfaces complete all as specified and directed.

Taking down carefully by unscrewing DB with MCB boards etc complete all as specified.

Material & Labour for point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn through and including heavy duty PVC Conduit concealed type not less than 20 mm dia , including all accessories like bend, tees, junction boxes etc. including 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc including pressed steel terminal box of suitable size with laminated white top sheet cover of 3.00 mm thick complete all as specified and directed. Note: Cutting chases for conduits and sinking's for boxes and making good to walls, floors etc. is deemed to be included in quoted rate.

Description all as per item No 121.00 here-in-before but point wiring for one 5 Amps socket outlet on independent board controlled by one-way switch.

Description all as per item No 121.00 here-in-before but point wiring for one 5 Amps socket outlet on same board controlled by one-way switch.

Description all as per item No 121.00 here-in-before but wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as earth wire connected to common earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch.

S&F Switch Piano type, white polycarbonate body, single pole, one way 6 amp, 230 V, including connecting complete all as specified and as directed.

S&F Switch Piano type, white polycarbonate body, single pole, one way 16 amp, 230 V, including connecting complete all as specified and as directed.

S&F Socket outlet 3 pin, 5A, flush type including connecting complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type including connecting complete all as specified and as directed.

S&F Ceiling rose ceiling rose, 3 phase white polycarbonate body 6 Amps, 250 volts AC, including connecting complete all as specified and as directed.

Supply and fix stepped type electronic fan regulator, white polycarbonate body, flush type, 230 V, including connecting complete all as specified and as directed.

Material & Labour for sub main wiring with two runs of single core multistranded copper conductor cable, of size 4 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including heavy duty PVC rigid conduit concealed type not less than 20 mm dia with all necessary fitting and including one run single core multistranded copper conductor cable, of size 4.0 Sqmm, PVC insulated, unsheathed, fire retardant as earth wire, fixed on wall / ceiling complete for AC sockets. Note: (a) 02 Runs of main cable and one run earth wire with conduit will be measured as one RM for payment. (b) Cutting chases for conduits and sinking's for boxes and making good to walls, floors etc. is deemed to be included in quoted rate.

Material & Labour for sub main wiring with two runs of single core multistranded copper conductor cable, of size 6 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including heavy duty PVC rigid conduit concealed type not less than 20 mm bore with all necessary fitting and including one run single core multistranded copper conductor cable, of size 6.0 Sqmm, PVC insulated, unsheathed, fire retardant as earth wire, fixed on wall / ceiling complete for DB connection. Note: (a) 02 Runs of main cable and one run earth wire with conduit will be measured as one RM for payment. (b) Cutting chases for conduits and sinking's for boxes and making good to walls, floors etc. is deemed to be included in quoted rate.

Material & Labour for sub main wiring with four runs of single core multistranded copper conductor cable, of size 10 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including heavy duty PVC rigid conduit concealed type not less than 32 mm dia with all necessary fitting and including one run single core multistranded copper conductor cable, of size 10 Sqmm, PVC insulated, unsheathed, fire retardant as earth wire, fixed on wall / ceiling complete for Air compressor socket. Note: (a) 03 Runs of main cable and one run earth wire and one run of PVC conduit will be measured as one RM for payment. (b) Cutting chases for conduits and sinking's for boxes and making good to walls, floors etc. is deemed to be included in quoted rate.

S&F distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 230 volts, double door type, fixed flush to wall ( for power points and AC socket) complete all as specified and directed.

S&F distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof TPN 4 way, vertical type with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, double door type 415 volts, fixed flush to wall (for light points) complete all as specified and directed.

S&F distribution board (DB), double door type made out of sheet metal enclosure (CRCA sheet) dust and vermin proof DB, TPN 12 way with 200 Amps rated copper bus bar, neutral link, IP 43 protection, fixed flush to wall and 01 No MCCB 160Amps 4 pole 16 kA complete all as specified and as directed.

S&F MCB’s single pole, 6 to 32 Amps, 230 volts with ‘C’ curve, fixed in sheet metal board complete including connecting complete all as specified and as directed.

S&F MCB’s single pole & neutral, 40 Amps, 230 volts with ‘C’ curve, fixed in sheet metal board complete including connecting complete all as specified and as directed.

S&F MCB’s triple pole & neutral, 63 Amps, 415 volts with ‘C’ curve, fixed in sheet metal board complete including connecting complete all as specified and as directed.

S & F metal clad plug & socket board SP & N enclosure with 2 pole and earth metal plug & socket complete with 20 Amp MCB SP, C curve complete all as specified and as directed.

S&F metal clad triple pole and earth enclosure with three pin and earth plugs and socket complete with one triple pole MCB 63 Amps 415 V, C type complete all as specified and as directed.

S&F LUMILINE Plus Wall/surface mounted LED batten extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver complete all as specified & as directed.

S&F Venus Neo HE PIR, a range of LED recessed panels with inbuilt occupancy sensor and is perfect for general and office lighting applications such as workstations, meeting rooms and cabins, corridors and break areas of size: (LxWxH) in (595x595x65) mm complete all as specified & as directed.

S&F suspended linear in sleek design fitting 2x36W suitable for all commercial spaces with diffuser complete all as specified & as directed.

S&F LED Building security light fitting 45 watt, incl lamps High Efficiency IP 65 protection, consisting of Electronic driver circuits, high quality Transmittance lens, powder coated Die Cast Aluminum housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminum housing with SS screws & connecting complete all as specified & as directed.

S&F security light bracket fabricated from 32 mm bore galvanised iron tubing light grade, 1.2 meter long, bent to shape fixed on bldg including mild steel flat iron clamps, nuts, bolts etc including taking down old bracket from existing position complete all as specified and as directed.

Labour for disconnecting of outdoor and indoor system of Air conditioner along with voltage stabliser of any capacity from one place and shifting to another or same place after building repair work and installing testing and commissioning again. Note : If any repair required in AC before taking out, inform to MES for repair complete all as specified and as directed.

M&L earthing complete with copper earth plate electrode 600mmx600mmx3.15mm thick, thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.50 mtr below normal GL and connected to earth plate . Earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt all around the earth plate and connected to earth lead of copper strip 20x3 mm by means of bolts, nuts, check nuts and washers of GI or steel and thimbles and other end of the earth wire connected to DB and protected by 50mm dia galvanized iron or steel pipe light grade and 20mm dia water pipe GI medium grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009 and also including making test point for testing of earthing made out of gun metal or phosphorous bronze size 75x75x25 mm complete for DB and Industrial socket. Note : 1. Charcoal dust and common salt shall be filled in layers of 15 centimeters all around the earth plate. 2. Copper strip will be laid connected to test point through plinth protection necessary cost of repair to plinth protection and brazing and welding deemed to be included in the item copper strip beyond 7.5 RM will be measured and paid separately).On completion the earth resistance test to be carried out. If desired value of resistance not obtained, the earthing will be re-done at no extra cost.

S&F test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hex head screw complete all as specified and as directed.

S&F single pointed air termination copper rod 12mm dia, 300mm long complete all as specified & as directed.

S&F 40mm bore GI pipe 1.5 RM long medium grade fixed by means of PCC 1:2:4, with the help of MS studs of size 1 Cubic feet for mounting of copper air termination rod complete all as specified & as directed.

S&F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drwan in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20x3mm copper strip including insulators with screw/nuts bolts etc. complete all as specified & as directed.

S&F air circulator fans 230 Volts single phase blade material steel, oscillating 450mm sweep with reversible ratation suitable for wall mounting complete all as specified & as directed.

Supply and fixing/drawing wiring for circuit/sub main wiring with PVC casing caping of suitable size inclusive of all Tees, elbows, reducers bell mouth size tube ends and fixing accesories including all fitting/fixtures fixed on wall/ceiling alongwith earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed as required of 2x2.5 sqmm and 1x2.5 Sqmm as earth wire complete all as specified & as directed. Note: (a) 2 Runs of main cable and one run earth wire and one run of PVC casing caping will be measured as one RM for payment. (b) Cutting chases for conduits and sinking's for boxes and making good to walls, floors etc. is deemed to be included in quoted rate.

Krishna Engineering