Fabrication/construction of main gate for Divisional Office and Divisional Stores of Generation Division, USHP-II, Kangan

Amount

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Supplying and stacking at site; Graded crushed stone aggregate of size 90 mm to 45 mm

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering- All work upto plinth level with: 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming cost of approved steel primer all complete Welded

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming cost of approved steel primer all complete Welded Angle Iron, 65x65x6mm 45 rm Angle Iron, 50x50x6mm 290 rm Round Iron, 22mm 466 rm Gate hole pass 12 no

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50mm thick with zink coating not less than 275gram/sqm (2.5ft x 10ft) x 17 no’s

Painting on G.S sheets and steel work with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. (27ft x 10 ft) x 2 No’s (18ft x 10ft) x 2 No’s

Providing and fitting of wheel 8" dia

Providing and fitting of Door lock

SAMEER AHMAD BHAT