CERTAIN REPAIRS TO WATER SUPPLY DISTRIBUTION LINES AND MISC REPAIRS TO FOOTPATH HARDSTANDING JAFFRIES AND CATTLE TRAP AT MIL STN GANDHIDHAM UNDER GE ARMY BHUJ

Amount

Taking up U/S CI /DI/ GI/PVC water main (incl all fittings) with spigot & socket /MS pipe or any other type of pipe & lead joint incl burning out joint & recovering lead from pipe of 50 mm bore for laying /rerouting of serviceable pipe after cleaning complete all as directed.

Supply and Fixing in any length UPVC pipe 50 mm dia pipe manufactured as per ASTM-D-1785 as per IS-559, Schedule-40 complete with all fittings,connections, laid in trenches/wall in required length complete all as specified and directed

Taking down carefully cast iron sluice valve of size 150 mm bore from CI water mains class PN 1.0 all as specified and directed

Taking down carefully cast iron sluice valve of size 100 mm bore from CI water mains class PN 1.0 all as specified and directed

Taking down carefully cast iron sluice valve of size 80 mm bore from CI water mains class PN 1.0 all as specified and directed

S&F Cast iron gate /sluice valve of size 150 mm dia stainless steel stem PN- 1.6 ((Flanged) conforming to IS 14846 alongwith hand wheel operated Make - Zoloto/Kirloskar/Kartar

S&F Cast iron gate /sluice valve of size 100 mm dia stainless steel stem PN- 1.6 ((Flanged) conforming to IS 14846 alongwith hand wheel operated Make - Zoloto/Kirloskar/Kartar

S&F Cast iron gate /sluice valve of size 80 mm dia stainless steel stem PN- 1.6 ((Flanged) conforming to IS 14846 alongwith hand wheel operated Make - Zoloto/Kirloskar/Kartar

Disconnecting and taking out old existing steel/PVC tubing and connections of any description/ grade and in any position in trenches/under floors / on walls etc including all fittings/accessories and fixtures such as bends, union, elbow socket, valves, taps etc, all as directed and specified for 20mm dia pipe complete all as specified and directed. Note :- Excavation & earth work shall be measured and paid for separately under respective item of Sch 'A'.

Disconnecting and taking out old existing steel/PVC tubing and connections of any description/ grade and in any position in trenches/under floors / on walls etc including all fittings/accessories and fixtures such as bends, union, elbow socket, valves, taps etc, all as directed and specified for 25mm dia pipe complete all as specified and directed. Note :- Excavation & earth work shall be measured and paid for separately under respective item of Sch 'A'.

Supply and Fixing in any length UPVC pipe 20 mm dia pipe manufactured as per ASTM-D-1785 as per IS-559, Schedule-40 complete with all fittings,connections, laid in trenches/wall in required length complete all as specified and directed

Supply and Fixing in any length UPVC pipe 25 mm dia pipe manufactured as per ASTM-D-1785 as per IS-559, Schedule-40 complete with all fittings,connections, laid in trenches/wall in required length complete all as specified and directed

S & F in repair UPVC Ball valves with operating handle (stop valve) of size 20 mm dia complete suitable for fittings with ASTM - 1785, Schedule 40 UPVC pipes all as specified and as directed.

S & F in repair UPVC Ball valves with operating handle (stop valve) of size 25 mm dia complete suitable for fittings with ASTM - 1785, Schedule 40 UPVC pipes all as specified and as directed.

S & F in repair UPVC Ball valves with operating handle (stop valve) of size 50 mm dia complete suitable for fittings with ASTM - 1785, Schedule 40 UPVC pipes all as specified and as directed.

S&F gun metal ball valve with iron handle screwed both ends for iron pipe and fixed of size bore of pipe 40 mm complete all as specified and as directed.

S&F gun metal ball valve with iron handle screwed both ends for iron pipe and fixed of size bore of pipe 50 mm complete all as specified and as directed.

Excavation in trenches in soft / loose soil nexc 1.5 mtr wide and not exc 1.5 m in depth etc complete and getting out in soft soil inciuding trimming sides and bottom of trenches complete all as specified and directed.

Returning filling in trenches including watering and well ramming in layer not exc 25 cm thick in soft/ loose soil complete all as specified and directed.

Removing excavated surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting pointall as specified.

S&F in replacement Submersible cable PVC insulated copper conductor flat 3 core 10 sqmm 1100 volt complete all as specified and directed..

S&F in replacement Submersible cable PVC insulated copper conductor flat 3 core 16 sqmm 1100 volt complete all as specified and directed.

Taking out existing U/S foot valve of size 50mm to 80mm bore complete all as specified and directed.

Supply and fixing cast iron foot valve flanged end of size 80 mm dia with all fitting and accessories complete all as specified and directed. Make- Kirloskar/zoloto /Kartar

Supply and fixing cast iron foot valve flanged end of size 50 mm dia with all fitting and accessories complete all as specified and directed. Make- Kirloskar/zoloto /Kartar

Supply and fix in repairs Cartridge Filter Online wound type of size 2.5" Dia x 20" long, Pressure 3.5 - 4.0Kg/Sqcm, MOC : PP, Filteration Grade 20 Microns, capacity 2.0m3/hr complete all as specified and directed.

Supply only Membrane cleaning solution No.33, Make : Dutch or equivalent as approved by GE.

Supply only Membrane cleaning solution No.22, Make : Dutch or equivalent as approved by GE.

Supply only Membrane cleaning solution No.11, Make : Dutch or equivalent as approved by GE.

S&F in replacement end Cap Plug of size up to 40 mm complete all as specified and directed.

M&L for dismantling the water mains from the delivery lines, lifting/taking up GI/UPVC/HDPE Column pipes, pumping sets of any description and in any position including submersible cable after disconnecting pumping sets from cable, repairs to the defective submersible cable and jointing of submersible cable, pump and motors by using water proofing jointing kit, and also jointing of crack/leaked HDPE pipe with MS sheet jointing clamp,rubber sheet, nut, bolts and washer etc replacement of defective column pipes, and including Lowering of submersible pump Sets, submersible cable, column pipes, reonnecting main delivery mains as existing and testing for satisfactory running and continuous flow of water etc complete all as directed by Engineer in charge in bore wells at various locations under GE(A) Bhuj Note: 1 Repair to Motor & Pumping sets, cable and column pipes etc. shall be measured and paid seperately. 2. Contractor shall take proper precautions while lifting out and removing pump set from bore well so as to avoid any damage to column pipe and submersible cable. All necessary T&P and equipments required for lifting out and lowering pump set etc shall be arranged by the contractor at his own cost. Lifting of defective submersible pumping set of any make and capacity from bore well after providing lifting tools, chain pulley etc. as required, by disconnecting/dismentling all electric connections, column pipes, steel ropes/chain and keeping them under safe custody for reuse all complete all as specified and as directed. NOTE : (i) The cost of transportation of the defective submersible pumping sets( pump or motor ) from site to workshop & back is deemed to be included in the quoted rates. (ii) Repair of motor and pump measured separately (iii) Refixing of column pipe to be done after proper descaling using steel wire brush.

Dismantling and strip opening of submersible pump & motor of any description and in any position for servicing /overhauling, cleaning, oiling/greasing, fixing of serviceable parts in position, removing & replacement of defective / unserviceable parts with new parts and reassembling the pump and motor, ensuring proper alignment of pump and motor, fixing in position, connecting to existing system and testing at site on full load to the entire satisfaction of the Engineer-in-Charge for the following capacities pumps & motors :- (a) 20 to 40 HP, three phase, 415 Volts, 50 Hz, AC supply Note: - (i) The replacement of defective / unserviceable parts shall be measured and paid separately as “Supply only” under appropriate item of Sch ‘A’ and fixing rate for new items are deemed to include under these item. (ii) Burnt out windings of motor shall be replaced, measured and paid separately under appropriate item of Sch ‘A’ for rewinding. (iii) (a) The rates for above items are deemed to include transportation of pumps/ motors to and from workshop as approved by Engineer-in-charge for necessary repairs, alignment and testing of pump and motors at authorised workshop. (b) Re-metalling to Pump shaft, polishing and grinding and making standard size to matching with Gun Metal Bush / Neck-ring shall be measured and paid for separately under appropriate item of Sch ‘A’ (iv) Lifting of pump and motor from bore well and lowering of pump and motor after repairs shall be measured and paid separately under appropriate item of Schedule `A'.-

M&L for rewinding of burnt submersible motor 20 to 40 HP, 3 phase, 415 V, 50 Hz of any make with water proof insulated copper conductor of the same specification as per old one after dismantling / cutting out burnt windings from stator assembly, cleaning slots properly complete with insulating slots packing, sleeves, papers & reassembling stator and rotor after replacement of worn out spares/matching works including painting with two coats of synthetic enamel paint over a coat of red oxide primer after preparation of motor external surface and water proof jointing for submersible cable 3 core, with replacement of oil seal, sand guard, bolt gusket, cable packing ring, water seal, bearing bush upper & lower etc complete all as specified and as directed.

Supply only gun metal impeller suitable for submersible pump of cap 20 to 40 HP of pump complete all as specified and as directed.

Supply only gun metal bush suitable for submersible pump of cap 20 to 40 HP of pump complete all as specified and as directed.

Supply only Water seal suitable for submersible pump of cap 20 to 40 HP of pump complete all as specified and as directed.

Supply only Bowl suitable for submersible pump of cap 20 to 40 HP of pump complete all as specified and as directed.

Supply only bronze bearing suitable for submersible pump of cap 20 to 40 HP of pump complete all as specified and as directed.

Supply only wear/ neck ring suitable for submersible pump of cap 20 to 40 HP of pump complete all as specified and as directed.

Supply only thrust washer/sim/ collar/ screw/ gasket and all other minor items suitable for submersible pump of cap 20 to 40 HP of pump complete all as specified and as directed.

Supply only coupling with key suitable for submersible pump of cap 20 to 40 HP of pump including connected items complete all as specified and as directed.

Supply and fix in repair HDPE (High density polyethylene) pipe, PE-63 grade, ISI marked , as per IS 4984, PN 10, Outer dia 100 mm, 10 kg/cm2, suitable for bore wells complete including providing suitable size MS clamps and SS nipples of flange/threaded type (made of SS-402 material) for connecting with submersible pump set and delivery mains, etc all as specified and directed. Note : Contractor Shall obtain and provide HDPE pipe in one length as required for borewell.

S&F in repair adoptor set 100 mm dia for connecting the submersible pump set with the HDPE pipes complete all as specified and directed.

Testing of Water for physical, bacteriological /Chemical analysis, as per stranded/IS code test from any Govt. Approved/recognized Lab or NABL approved Lab or as approved by the GE. Sample should be collected by Ref of lab. Note: (i) Testing of water shall be carried out monthly.if contractor fails to carry out the test, 500 rupees for each report shall be recovered per month.

Dismantling of defective centrifugal/ induction/ monoblock /openwell pump set of any make/model for repairing and reassembling including replacement of defective spare parts by new one of capacity 2 to 15 HP pump sets, including required MS stud with nuts and bolts etc complete all as directed by Engineer-in-charge. Note: Spare parts of the centrifugal pump sets shall be measured and paid separately under relavent item of schedule.) The rates for above items are deemed to include transportation of pumps/ motors to and from workshop as approved by Engineer-in-charge for necessary repairs, alignment and testing of pump and motors at authorised workshop.

M & L for rewinding of centrifugal/ induction/ monoblock /openwell motor after taking out all burnt ,U/s copper winding wire, cleaning and finishing of the casing and slots properly for rewinding the motors with existing SWG super enameled copper wire including varnishing ,baking ,testing for capacity of 2 HP Motor complete all as specified and directed.

M & L for rewinding of centrifugal/ induction/ monoblock /openwell motor after taking out all burnt ,U/s copper winding wire, cleaning and finishing of the casing and slots properly for rewinding the motors with existing SWG super enameled copper wire including varnishing ,baking ,testing for capacity of 3.5 HP Motor complete all as specified and directed.

M & L for rewinding of centrifugal/ induction/ monoblock /openwell motor after taking out all burnt ,U/s copper winding wire, cleaning and finishing of the casing and slots properly for rewinding the motors with existing SWG super enameled copper wire including varnishing ,baking ,testing for capacity of 5.0 HP Motor complete all as specified and directed.

M & L for rewinding of centrifugal/ induction/ monoblock /openwell motor after taking out all burnt ,U/s copper winding wire, cleaning and finishing of the casing and slots properly for rewinding the motors with existing SWG super enameled copper wire including varnishing ,baking ,testing for capacity of 7.5 HP Motor complete all as specified and directed.

M & L for rewinding of centrifugal/ induction/ monoblock /openwell motor after taking out all burnt ,U/s copper winding wire, cleaning and finishing of the casing and slots properly for rewinding the motors with existing SWG super enameled copper wire including varnishing ,baking ,testing for capacity of 15.0 HP Motor complete all as specified and directed.

Supply only of gland as per exsiting size for pumps complete

Supply only bearings as per exsiting size complete

Supply only coupling for pumpsets as per exsiting size complete

Material and labour for installing, testing and commissioning fully automatic star delta starter panel for 15 HP centrifugal pumpset, locking arrangement, three phase, 430 V, 50 Hz, suiatble rating switchgear, CRCA sheet 2mm thick metal enclosure, duly powder coated, copper bus bar ,including electric connection and angle iron frame which is made out of 40x40x5 mm angle iron, factory fabricated cubical type weather proof, mounting on floor, civil work, including following protection:- (i) Under voltage & Over Voltage (ii) Under load & Over load (iii) Single phase preventor (iv) Phase reversal (v) Earth fault (vi) Short circuit (vii) Unbalanced voltage (Negative phase sequence relay) (viii) Switching surge

M & L for repairing and attending complaint for day to day one job basis of no water supply in MD/OTM buildings at Mil Stn Gandhidham, water leckage, line blockage etc arrangement of all T&P and ladder, excavation & earth work if any , replacement of pipe of any size & type upto 1 Mtr/ broken nipple/ elbow/ union/ long/ bend/ reducer/clamp/ screw complete including threading/ cutting of pipe as required any type & size at site all as specified and directed.

DOL starter for three phase motor, 220 V 5 HP Motor as in replacement , complete all as specified and as directed.

DOL starter for three phase motor, 220 V 7.5/ 12.5 HP Motor as in replacement , complete all as specified and as directed.

Single phase preventor relay as in repair, complete all as specified and directed. Make: L&T/Minilac/C&S or any other equivalent

Supply & fix in repair three Pole Power Contractor -Type, TC1-D25 10, 25 Amps, 415V, 50 Hz suitable for 7.5 HP complete all as specified and directed.

Supply & fix in repair three Pole Power Contractor -Type, TC1-D25 10, 25 Amps, 415V, 50 Hz suitable for 25 to 40 HP complete all as specified and directed.

Supply & fix in repair three Pole Power Contractor -Type, MNX-32, 40 Amps, 415V, 50 Hz complete all as specified and directed.

Supply & fix in repair four Pole Power Contractor -Type TC1DX204 , 63 Amps, 415V, 50 Hz complete all as specified and directed.

Supply only bleaching powder the chlorine intent form 35-40% chlorine powder or chromate lime, used for water treatment complete all as specified and directed.

Supply only high strength calcium based granular containing appropriate quantities of chlorination dipensates / corrosion inhibitors to prevent encrustation / scaling in distribution system in 45 / 50 Kg packing of approved and tested from Govt lab or equivalent testing agency (not more than 02 months old packing) complete all as specified and directed.

Cutting/ removing of hurbs, shrubs, upto 25 mm dia grith of bushes from ground level and grass in ihe entire area of installation / Pump house area and deposited outside 100 Mtrs from Pump House, complete all as specified and directed. Note : All cutting tools shall be provided by contractor.

Dismantling of fencing wire mesh any type complete all as specified & directed .

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed .

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) and disposing off rubbish off the premises of cantonment complete all as specified and directed.

M & L for cement concrete type D2 1:4:8 (40mm graded aggregates) in foundation filling and mass concrete complete all as specified & directed .

M & L for Mild steel angle, flat work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. conforming to Fe-290-Gde E-165 complete all as specified & directed.

Supply only of Mild Steel in flat, Round or Square bars, in available length for fixing of chain link fencing having quality Fe 410-W (Gde-E-250) Quality-A complete all as specified & directed.

S & F of 5 to 10 mm dia MS screw bolts (machine made) with hexagonal or square heads at one end & screwed the other or screwed both ends ,each screwed end to be fitted with washers & one hexagonal or square nut length of bolt & n.exc 5 cm long complete all as specified & as directed.

Supply only chain link MS galvanised fencing of 100mm x 100mm mesh and dia of wire 3.15mm complete all as specified & directed.

Fixing of chain link fencing incl line wires any mesh size & type to any type of standards rails, straining bolts etc including provision of line wire complete all as specified & directed.

M & L for preparation of steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified & directed.

M & L for preparation of steel surfaces of any description n exc 10 cm in width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified & as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified & as directed.

M & L for glazed finish chequred cement concrete coloured tiles of size 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry (with gray cement and pigment) over and including 20 mm thick in screen bed in CM (1:6) for fixing tiles complete all as specified and directed.

M&L 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M & L for 25 mm thick cement concrete type B-0,1:2:4 (12.5 mm graded aggregate) as in padding to receive chequred tiling and all other similar works complete all as specified and directed.

M&L at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for Preparation of new or previously untreated surfaces of concrete and concrete based materials of any description and in any position over 10 cm width or girth and Material and labour for applying two coat of synthetic enamel paint on concrete surfaces over priming paint plaster coats complete all as specified and directed.

M & L for 40mm thick PCC 1:2:4 type B-0 (12.5 mm graded stone aggregate) as in floors and all other similar works complete all as specified and directed.

M & L for 100 mm thick PCC 1:3:6 type C-2 (40 mm graded stone aggregate) as in sub base and all other similar works complete all as specified and directed.

M & L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all specified and directed.

M & L for Forming construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

Demolition of Brickwork or stone / boulder masonry / precast concrete block walling and similar items i.e. ashlar facing dressing stone work, precast concrete articles etc of any description and in any position built in cement mortar including all quoins, arches and pillars etc and disposing off rubbish) off the premises of cantonment complete all as specified and directed.

M & L for Precast cement concrete block masonry with solid blocks Type C1 1:3:6 (20mm graded aggregate), exc. 10cm in width and setting in Cement mortar 1:6 complete all as specified & as directed.

M & L for PCC Type B0 1:2:4 Nominal Mix (12.5mm graded aggregates in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified & as directed.

Taking down cement plaster of any description from brick wall or concrete surfaces including racking out joints and hacking for key, scrubbing down with water etc complete all as directed.

M & L for 15 mm thick cement plaster in CM (1:6) on brick work/ RCC wall and finish the surface fair and even without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint all as specified and directed.

M & L for preparation of newly plastered wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for Preparation of old decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down, smoke soot moulds, moss and efflorescent salts treating oil and greasy spots and Material and labour for applying one coat of cement base paint including watering and curing of surface adequately before and after application of cement base paint complete all as specified and directed.

Dismantling of structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

S & F of 1.00 mm thick MS plain, black sheet in wall cladding , steel gates and all other similar work complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of primer red oxide, zinc chrome complete all as specified and directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for precast cement concrete Type C1 1:3:6 (20mm graded aggregate) and set in CM 1:6 in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed.

M & L for mild steel TMT bars, 10mm dia and over,as in reinforcement, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

Ditto as per above item but 5mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

S & F of Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) having quality of Fe 410-W (Gde - E - 250) quality - A complete all as specified & as directed.

S & F in repairs of 50mm dia GI pipes Heavy Class all as specified and complete all as directed.

S & F of 12 mm dia MS screw bolts (machine made) with hexagonal or square heads at one end & screwed the other or screwed both ends ,each screwed end to be fitted with washers & one hexagonal or square nut length of bolt Exc 5cm and N. exc 10 cm long complete all as specified & as directed.

S & F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc complete all as specified and directed. (each line wire to be measured)

M & L for Providing precast cement concrete Type B0 1:3:6 (12.5 mm graded aggregate) and set in CM 1:6 louvres and jallies, 35mm thick (measured solid), including all mouldings all as specified and directed.

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.

sudarshan builders