Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.9 LAdmitted-Finance | ₹15.9 L | L1 | Admitted-Finance |
| 2 | L2₹18.9 L+₹3 L (18.9%)Admitted-Finance | ₹18.9 L+₹3 L (18.9%) | L2 | Admitted-Finance |
| 3 | L3₹20.6 L+₹4.8 L (29.9%)Admitted-Finance NO 12 HARIKRISHNAPURAM SAWYERPURAM TUTICORIN THOOTHUKUDI TAMIL NADU 628251 | TUTICORIN | TAMIL NADU | 628251 | ₹20.6 L+₹4.8 L (29.9%) | L3 | Admitted-Finance |
| 4 | Rejected-Technical | - | - | Rejected-Technical Technically not suitable |
| 5 | Rejected-Technical | - | - | Rejected-Technical Technically not suitable |
| Sl No | Description | Qty | Unit | avisan engineering enterprises L2 | SRI SRINIVASA ENGINEERING WORKS L1 | VOYAGER MARINE SERVICES INDIA PRIVATE LIMITED L3 |
|---|---|---|---|---|---|---|
| 1.00 | Rudder clearences
Rudder drop, Jumping clearance,bush clearances and pintle bush clearance are to be measured and recorded.same to be offer to IRS and ship staff.Examine rudder pintle bearings and lubricated with grease
before undocking. | 1 | LS | 1,00,000 ₹1,00,000 | 70,000 ₹70,000 | 20,000 ₹20,000 Lowest |
| 2.00 | Rudder
Rudder to be removed from its position,cleaned,pressure tested and float coated and offer to IRS and ship staff.After survey same to be fitted back and plam bolts to be locked and cemented.Lifting eye pads fabrication,welding,testing and removal after completion of works.all consumables like grease, fish oil,sealant putty,cement, copper washers,drain plugs are to be supplied in contractor scope. all machining works,
hydraulic jacks and hydraulic power pack, certified chain pulleys and slings,welding and gas cutting works are
in contractor scope | 1 | LS | 8,95,000 ₹8,95,000 | 2,00,000 ₹2,00,000 Lowest | 4,65,000 ₹4,65,000 |
| 3.00 | Laser sighting
Laser sighting and alignment to be carried out for both upper and lower bearing housing,Measure offsets and angular misalignments,showned to OEM and IRS,reporrts to be submitted. | 1 | LS | 2,00,000 ₹2,00,000 Lowest | 2,00,000 ₹2,00,000 Lowest | 3,00,000 ₹3,00,000 |
| 4.00 | Rudder stock
Rudder stock,Tiller unit,carrier bearing,gland unit and hydraulic acuator unit along with hydraulic rams to be reomved,Rudder stock,carrier bearing unit, upper and lower bearing bushes calibrated and offer to IRS and
ship staff,rudder stock NDT to be carried out,after completion of survey rudder stock to be fitted back along with new gland packing.Lifting eye pads fabrication,welding,testing and removal after completion of works.all
consumables and machining works, hydraulic jacks and hydraulic power pack, certified chain pulleys and slings,welding and gas cutting works are in contractor scope | 1 | LS | 3,00,000 ₹3,00,000 | 2,40,000 ₹2,40,000 Lowest | 2,95,000 ₹2,95,000 |
| 5.00 | Lower bearing bush
Remove Lower bearing bush and clean the housing thoroughly.Inspect housing bore and check for scoring, corrosion, or ovality. All necessary tools and materials are in contractor scope.new bearing to be machined as
per laser alignment report.Fitment of new bearings (usually by dry ice or liquid nitrogen) to shrink-fit into the tube housing. Insert bearings carefully into the housing without damaging surfaces. Allow the bearings to reach ambient temperature and achieve a tight interference fit and locked with screws.and bearingclearances showned to OEM and IRS .Satisfactory operation trials to be showned.
All required consumables like dry ice or liquid nitrogen,and all machining works, hydraulic power packs, hydraulic jacks,pullers, certified lifting tools and slings, eye pad welding and testing, all welding and gas
cutting works are in contractor scope.Bush dimensions approx : ID=812mm,OD=871mm,L=930 mm | 1 | NOS | 80,000 ₹80,000 Lowest | 2,40,000 ₹2,40,000 | 1,45,000 ₹1,45,000 |
| 6.00 | Upper bearing bush
Remove Upper bearing bush and clean the housing thoroughly.Inspect housing bore and check for scoring, corrosion, or ovality. All necessary tools and materials are in contractor scope.new bearing to be machined as per laser alignment report.
Fitment of new bearings (usually by dry ice or liquid nitrogen) to shrink-fit into the tube housing. Insert bearings carefully into the housing without damaging surfaces. Allow the bearings to reach ambient temperature and achieve a tight interference fit.and bearing clearances showned to OEM and IRS .Satisfactory operation trials to be showned.
All required consumables like dry ice or liquid nitrogen,and all machining works, hydraulic power packs, hydraulic jacks,pullers, certified lifting tools and slings, eye pad welding and testing, all welding and gas cutting works are in contractor scope.Bush dimensions approx : ID=500mm,OD=550mm,L=550 mm | 1 | NOS | 80,000 ₹80,000 Lowest | 2,40,000 ₹2,40,000 | 1,55,000 ₹1,55,000 |
| 7.00 | Carrier bearing/Thrust bearing
Remove Thrust bearing and clean the housing thoroughly and new bearing to be fitted.All necessary tools and materials are in contractor scope. satisfactory operation trials to be showned to OEM and IRS.
All required consumables and all machining works, hydraulic power packs, hydraulic jacks,pullers, certified lifting tools and slings, eye pad welding and testing, all welding and gas cutting works are in contractor
scope.Approx.dia= 1800 mm | 1 | NOS | 75,000 ₹75,000 Lowest | 1,60,000 ₹1,60,000 | 2,65,000 ₹2,65,000 |
| 8.00 | Rudder stock lower bearing sleeve
Remove exsiting rudder stock lower bearing sleeve and clean thoroughly and new sleeve to be mechined as per required dimensions and fitted in position(usually by electric heating or oil bath) to shrink-fit . All necessary tools and materials are in contractor scope.Satisfactory operation trials to be showned.
All required consumables and all machining works, pullers, certified lifting tools and slings,all welding and gas cutting works are in contractor scope.Sleeve dimensions approx : ID=770mm,OD=820mm,L=1000 mm | 1 | NOS | 80,000 ₹80,000 Lowest | 1,60,000 ₹1,60,000 | 2,95,000 ₹2,95,000 |
| 9.00 | Rudder stock upper bearing sleeve
Remove exsiting rudder stock upper bearing sleeve and clean thoroughly and new sleeve to be mechined as per required dimensions and fitted in position(usually by electric heating or oil bath) to shrink-fit . All
necessary tools and materials are in contractor scope.Satisfactory operation trials to be showned.
All required consumables and all machining works, pullers, certified lifting tools and slings,all welding and gas
cutting works are in contractor scope.Sleeve dimensions approx : ID=450mm,OD=500mm,L=600 mm | 1 | NOS | 80,000 ₹80,000 Lowest | 80,000 ₹80,000 Lowest | 1,25,000 ₹1,25,000 |
Tender Value
Refer Docs
EMD Value
₹75,000
Closing Date
30 Jan 2026, 11:00 amClosed
M(SRC-OS)
HSL
Rudder and Rudder Stock Works on IN PROJECT 22050
2026_HSL_98783_1
SR COMPLEX/PRODUCTION/OUT SOURCEREQUISITION/2025/704
Open Limited
Miscellaneous Services
Service
30 days
VISAKHAPATNAM
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹75,000
Yes
16 Mar 2026
12 Jan 2026
30 Jan 2026
12 Jan 2026
30 Jan 2026
12 Jan 2026
Rudder clearences Rudder drop, Jumping clearance,bush clearances and pintle bush clearance are to be measured and recorded.same to be offer to IRS and ship staff.Examine rudder pintle bearings and lubricated with grease before undocking.
Rudder Rudder to be removed from its position,cleaned,pressure tested and float coated and offer to IRS and ship staff.After survey same to be fitted back and plam bolts to be locked and cemented.Lifting eye pads fabrication,welding,testing and removal after completion of works.all consumables like grease, fish oil,sealant putty,cement, copper washers,drain plugs are to be supplied in contractor scope. all machining works, hydraulic jacks and hydraulic power pack, certified chain pulleys and slings,welding and gas cutting works are in contractor scope
Laser sighting Laser sighting and alignment to be carried out for both upper and lower bearing housing,Measure offsets and angular misalignments,showned to OEM and IRS,reporrts to be submitted.
Rudder stock Rudder stock,Tiller unit,carrier bearing,gland unit and hydraulic acuator unit along with hydraulic rams to be reomved,Rudder stock,carrier bearing unit, upper and lower bearing bushes calibrated and offer to IRS and ship staff,rudder stock NDT to be carried out,after completion of survey rudder stock to be fitted back along with new gland packing.Lifting eye pads fabrication,welding,testing and removal after completion of works.all consumables and machining works, hydraulic jacks and hydraulic power pack, certified chain pulleys and slings,welding and gas cutting works are in contractor scope
Lower bearing bush Remove Lower bearing bush and clean the housing thoroughly.Inspect housing bore and check for scoring, corrosion, or ovality. All necessary tools and materials are in contractor scope.new bearing to be machined as per laser alignment report.Fitment of new bearings (usually by dry ice or liquid nitrogen) to shrink-fit into the tube housing. Insert bearings carefully into the housing without damaging surfaces. Allow the bearings to reach ambient temperature and achieve a tight interference fit and locked with screws.and bearingclearances showned to OEM and IRS .Satisfactory operation trials to be showned. All required consumables like dry ice or liquid nitrogen,and all machining works, hydraulic power packs, hydraulic jacks,pullers, certified lifting tools and slings, eye pad welding and testing, all welding and gas cutting works are in contractor scope.Bush dimensions approx : ID=812mm,OD=871mm,L=930 mm
Upper bearing bush Remove Upper bearing bush and clean the housing thoroughly.Inspect housing bore and check for scoring, corrosion, or ovality. All necessary tools and materials are in contractor scope.new bearing to be machined as per laser alignment report. Fitment of new bearings (usually by dry ice or liquid nitrogen) to shrink-fit into the tube housing. Insert bearings carefully into the housing without damaging surfaces. Allow the bearings to reach ambient temperature and achieve a tight interference fit.and bearing clearances showned to OEM and IRS .Satisfactory operation trials to be showned. All required consumables like dry ice or liquid nitrogen,and all machining works, hydraulic power packs, hydraulic jacks,pullers, certified lifting tools and slings, eye pad welding and testing, all welding and gas cutting works are in contractor scope.Bush dimensions approx : ID=500mm,OD=550mm,L=550 mm
Carrier bearing/Thrust bearing Remove Thrust bearing and clean the housing thoroughly and new bearing to be fitted.All necessary tools and materials are in contractor scope. satisfactory operation trials to be showned to OEM and IRS. All required consumables and all machining works, hydraulic power packs, hydraulic jacks,pullers, certified lifting tools and slings, eye pad welding and testing, all welding and gas cutting works are in contractor scope.Approx.dia= 1800 mm
Rudder stock lower bearing sleeve Remove exsiting rudder stock lower bearing sleeve and clean thoroughly and new sleeve to be mechined as per required dimensions and fitted in position(usually by electric heating or oil bath) to shrink-fit . All necessary tools and materials are in contractor scope.Satisfactory operation trials to be showned. All required consumables and all machining works, pullers, certified lifting tools and slings,all welding and gas cutting works are in contractor scope.Sleeve dimensions approx : ID=770mm,OD=820mm,L=1000 mm
Rudder stock upper bearing sleeve Remove exsiting rudder stock upper bearing sleeve and clean thoroughly and new sleeve to be mechined as per required dimensions and fitted in position(usually by electric heating or oil bath) to shrink-fit . All necessary tools and materials are in contractor scope.Satisfactory operation trials to be showned. All required consumables and all machining works, pullers, certified lifting tools and slings,all welding and gas cutting works are in contractor scope.Sleeve dimensions approx : ID=450mm,OD=500mm,L=600 mm
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.02 MB
TBID_704.pdf
Tender Documents • 0.38 MB
ANNEXURE_A.pdf
Tender Documents • 0.19 MB
BOQ_108352.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .