Construction of pucca drain with slab and paver block road near H.O Rabindra Chakraborty ,under ward No.33,AMC.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering shuttering - All work upto plinth level 1:3:6(1 cement:3fine sand:6 graded well burnt brick aggregate 20 mm nominal size.)

First class brick work in foundation and plinth including cost of all metarial as required complete In cement mortar 1:4(1cement:4 fine sand)

12 mm cement plaster of mix In cement concrete mortar 1:4(1cement:4 fine sand)

Centering shuttering including struttings, propping etc. and removal of form work for: suspended floors, roofs landing balconies and access platform with timber planks

Reinforcement for RCC work including straightening cutting bending placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500 D or more.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses,plinth and skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor fivelevel excluding cost of centring, shuttering, finishingand reinforcement-1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying flat brick soling layer on preparedsubgrade according to lines, grades and cross-sectionshown on the drawing, filling joints with Earth, free fromclay with a Plasticity Index not exceeding 6, watering androlling the same with three wheeled road roller 80-100 kNas per MoRD Technical Specification Clause 412.

60 mm thick factory made c.c interlocking paver block of M -30 GradeCement concrete 1:2:4 in pavements, laid to required slope and camber in panels Providing and laying 60 mm thick factory made cement concreteinterlocking paver block of M-30 grade made by block makingmachine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over andincluding 50 mm thick compacted bed of sand, filling the jointswith fine sand etc. all complete as per specification and approval/ direction of the Engineer-in-charge.

Providing and laying in position of specified grade reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement - All work upto plinth level 1:2:4(1 cement:2fine sand:64graded stone aggregate 20 mm nominal size.)