REPAIR/MAINTENANCE OF INTERNAL ELECTRIFICATION INCLUDING REPLACEMENT OF INTERNAL WIRING SWITCH SOCKETS, LIGHT FITTINGS, DBs AND ALLIED WORKS IN DOMESTIC AREA AND TECH AREA AT AF STN BHUJ

Amount

Pulling down the existing U/S wires of any type from concealed wiring carefully of aluminium/copper point wiring (light, fan, bell, socket, power point etc.) with or without conduit, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete all as specified and directed by Engineer-in-Charge.

Pulling out sub main wiring only any size of aluminium conductor cable PVC insulated with or without condiut complete all as specified and directed by Engineer-in-Charge.

Taking down main switch/DB’s including MCB’s with board and fixture of any description and making good disturbed surface of walls etc complete all as specified and directed by Engineer-in-Charge.

Material & labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through and including PVC CASING & CAPPING INCLUDING accessories etc including fixed to wall/ceiling including provision of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with PVC surface box complete all as specified and directed by Engineer-in-Charge for :-

One light point controlled by one, one way switch single pole piano type.

One Fan point controlled by one, one way switch single pole piano type.

One 3 pin 5 Amp socket outlet on the same board.

One 3 pin 5 Amps socket out let on independent board.

One bell point controlled by one bell push on independent board.

All as per item No.4 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board complete all as specified and directed by Engineer-in-Charge.

Material & labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through existing conduit including provn of 1.5 sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed as earth wire continuity with new plastic laminated white coloured top sheet cover 3.0 mm thick on existing sunken box complete all as specified and directed by Engineer-in-Charge for :-

One light point controlled by one, one way switch single pole piano type .

One Fan point controlled by one, one way switch single pole piano type.

One 3 pin 5 Amp socket outlet on the same board.

One 3 pin 5 Amps socket out let on independent board.

One bell point controlled by one bell push.

All as per item No.6 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board complete all as specified and directed by Engineer-in-Charge. .

Material & labour for point wiring complete with 1.5 sqmm single core multi stranded copper conductor FRLSH PVC insulated but unsheathed cable 1100 volts grade drawn through and including rigid steel ERW conduit of 25 mm dia (external) heavy duty including necessay flame proof /weather proof conduit accessories and fitting concealed in wall/ceiling etc including sealing threaded joints in conduit accessories with teflon tape including 1.5 sqmm single core FRLSH PVC insulated but unsheathed multistranded copper conductor cable as in continuous earth.Wiring shall be suitable for flame proof area as per STEC-7 for One flame proof light point controlled by one,single pole flame proof switch complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular plastic flush box of module 1/2 flush ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular plastic flush box of module 3 flush ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular plastic flush box of module 4 flush ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular plastic flush box of module 6 flush ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular plastic flush box of module 8 flush ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular plastic flush box of module 12 flush ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular plastic flush box of module 16 flush ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular white cover plate with frame of module 1 flush ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular white cover plate with frame of module 2 flush ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular white cover plate with frame of module 3 flush ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular white cover plate with frame of module 4 flush ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular white cover plate with frame of module 6 flush ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular white cover plate with frame of module 8 flush ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular white cover plate with frame of module 12 flush ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular white cover plate with frame of module 16 flush ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply & fix modular blank plate module 1 complete all as specified and directed by Engineer-in-Charge.

Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through and including PVC casing caping ISI marked with accessories and 4 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engr-in-Charge.(Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)

Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 6 Sqmm single core, copper conductor drawn through and including PVC casing caping ISI marked with accessories and 6 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engr-in-Charge.(Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)

Material & labour for sub main wiring with two runs of PVC insulated and unsheathed FRLSH cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor in existing conduit drawn through and including PVC casing caping ISI marked with accessories and 4 Sqmm single core multistranded copper conductor FRLSH PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed by Engr-in-Charge.(Note: Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)

Labour only for attending emergent complaints i.e no light ,earth leakage,short circuit,neutral break,mains/submain/internal circuit of existing system of main building/block,making continious electric supply including carrying out minor repairs etc as required to make the system in order/functional including replacing fuse wire,copper cable,copper thimbles,glands,earthing wire complete all as specified and directed by Engineer-in-Charge. Note:- 1.Rate of Fuse wire,copper cable of size 1.5,2.5,4 Sqmm upto 3 RM,copper thimbles,glands,earthing wire are deemed to be considered in this item. 2.Minimum One electrician to be present daily during the contract period,if found absent Rs-600 per day will be deducted daily.

Supply & fix in replacement energy saving, evironment friendly, long life, corrosion resistent, impact proof, Mini LED building security light made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP 65 protection with LED 20 W light source all as per Havells or equivalent in Orient/Philips/Bajaj/CG/Polycab including material and labour for suitable bracket made of 20 mm dia light grade GI pipe & MS clamps complete with nuts and bolts and washers complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement recessed mounting LED 2x2 luminaire with white acrylic flat light dissipater with LED light source of 34/36 Watt of size 2’x2’(Feet) square shape suitable for False/POP ceiling including cutting the existing POP ceiling and fixing complete all as specified and as directed by Eng-in-Charge.

Supply & fix in replacement recessed mounting LED 1'x1' luminaire with white acrylic flat light dissipater with LED light source of 15 Watt of size 1’x1’(Feet) square shape suitable for False/POP ceiling including cutting the existing POP ceiling and fixing complete all as specified and as directed by Eng-in-Charge.

Supply and fix in replacement recessed mounting LED 6"x6" luminaire with white acrylic flat light dissipater with LED light source of 12 Watt of size 6"x6"(Inch) square shape suitable for False/POP ceiling including cutting the existing POP ceiling and fixing complete all as specified and as directed by Eng-in-Charge.

Supply and fixing LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable in flexible steel conduict with flame proof cable glands complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 10 W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting etc complete all as specified and directed by Engr-in-Charge

Supply and fixing in repairs wall mounted decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack instant start with uniform light distribution 20 W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting etc complete all as specified and directed by Engr-in-Charge

Repairs to flame proof tube light fitting 1x36/40W of any make including replacement of defective items such as Starter,Choke, Bipin Holder, flexible wire whichever to be required to make servicable complete all as specified and directed by Engr-in-Charge. Note : Spares shall be paid and measured separately under respective item.

Supply & fix in replacement LED retrofit 4 ft 18/20 Watt T8 Tube light fittings etc complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement LED retrofit PL-L 15 W light fittings etc complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement LED outdoor inground spike light 7 Watt (Multicolour) made from cast alluminium housing, IP 65 suitable for garden/ facad lighting complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of LED Garden light / Post top of 25 Watt Integral pole mounted decorative LED with IP-65 protection complete fixed on existing post/New post with all assembly and electric connection with service wire complete all as specified and directed by Engineer-in-Charge.

Supply & fix in replacement for flame proof and weather proof rotary type switch,16 Amps,250 Volts,AC single pole, (LM-6) aluminium alloywith flame proof cable entry glands CMRS certified,ISI marked complete all as specified and directed by Engr-in-Charge. .

Supply & fix in replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 triple pole and neutral 4 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032single pole and neutral 12 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 single pole and neutral 8 ways with 200 Amp rated bus bar 415 volts powder coated complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement double door Sheet metal enclosures factory made DBs protection class IP-43, suitable for fixing of MCBs, Isolators etc, confirming to IS 13032 single pole and neutral 4 ways 415 volts powder coated complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of isolators, MCBs, etc. In distribution board of the following rating and capacities complete all as specified and directed by Engineer-in-Charge.

MCB TPN 415 volts 63 Amps Capacity, 10 KA

MCB TPN 415 volts 100 Amps Capacity, 10 KA

MCB SPN of 240 volts 20/32/40 Amps Capacity, 'C' series, 10 KA

MCB SP of 240 volts 5-40 Amps Capacity, 'C' series, 10 KA

Supply & fix in replacement metal clad enclosure pole and neutral with a two pin and earth plug and socket complete 240 volt with one single pole MCB of 20 Amps complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement industrial sheet metal triple pole and earth enclosure with a three pin and earth plug with socket complete with one MCB TPN of capacity 32/40/63 Amps, 10 KA 415 Volts complete all as specified and as directed by the Eng In Charge.

Supply & fix in replacement capacitor of capacity 2.5 mfd (PVC Body) suitable for ceiling/Exhaust fans/Wall Mounted Fans of any description,any sweep complete all as specified and as directed by the Eng In Charge.

Taking down and refixing Ceiling fans/Wall fan/Exhaust fan/Pedestal Fan of any sweep any size from site for repair complete all as specified and directed by Engr-in-Charge.

Material & labour for servicing of 1200/1400MM Ceiling Fan by dismantling carefully and taking out unserviceable parts, dust & grease, cleaning of internal parts with kerosene oil, washing, checking of alignment of shaft, oiling and re-greasing of bearing/bushes including replacing of unserviceable part like bearing ,gun metal bush, capacitor,Rubber reel of suitable capacity and re-assembling the same and complete all as specified and directed by Engr-in-Charge.

Material & labour for taking out & removing old burnt-out windings of Ceiling fans of any description and rewinding of fan motor with appropriate size super enameled copper wire as approved by Eng-in-charge including insulating material such as illuminous paper,Letherized paper,cotton tape,glass sleeving,insulating varnish ,Bearing ,Bushes,capacitor etc.and transportation to site after testing at workshop,connecting and testing on full load to the entire satisfaction of Eng-in-charge,including painting of fans of any description(ceiling fan/exhaust fan/wall mounte fan/pedestal fan) with applying one coat of synthetic enamel paint(white/Grey) by spray machine including preparation of exisiting decorated surfaces of fans complete all as specified and directed by Engr-in-Charge..

All asper item No 52 but rewinding of metal exhaust fans from 250mm to 450 mm sweep size

All asper item No 52 but rewinding of wall mounted fans of any size

Supply & fix in replacement, switch piano flush type, 5 Amp. SP, one way complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement socket outlet 3 pin, 5A, flush type complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement switch socket combination, 2 in 1, 5 Amp, flush typ complete all as specified and directed by Engineer in Charge.

Supply & fix in replacement switch socket combination 2 in 1, 5/16A 5 in 1 Amp flush type universal complete all as specified and directed by Engr-in-Charge. .

Supply & fix in replacement switch bell push, flush type, 5 Amp complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement, modular switch flush type, 6 Amp. SP, one way ,1 module complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement modular socket outlet, 3 pin, 6 Amp, flush type 2 module complete all as specified and directed by Engr-in-Charge

Supply & fix in replacement modular swicth, 16 Amp flush type 1 module complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement modular socket outlet, 3 pin, 6/16 Amp flush type 2 module complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement modular bell push, flush type, 6 Amp,1 module complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement RCCB DP 240 Volt, 32/40 Amp, 300 mA , complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement bell, AC, 230 V, SP, ding dong type complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement stepped type electronic fan Regulator flush type on the existing phenolic laminated etc as reqd single pole 240 volts grade 350 watts heavy duty ISI marked complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of ceiling fan regulator 120 Watt 2 module Modular Type electronic step type 5 step 360 deg complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of Ceiling rose 3 phase, PVC/ Polycarbonate body complete all as specified and directed by Engr-in-Charge.

Supply and repair hylum sheet 3mm thick as existed in the switch board making provision for fixing switches and socket complete all as specified and directed by Engr-in-Charge.

Supply & fix in repairs sheet metal meter fixing boards of size 80 cm x 100 cm x 20 cm made out of 2.0 mm thick cold rolled cold Annealed (CRCA) sheet treated two coats of synthetic enamel paint over a coat of red-oxide primer after necessary preparation to surfaces complete with locking arrangement, meter fixing arrangement, and fixing the boards concealed/on surface with addition/alterations (including taking down and re- fixing existing 5 nos energy meter single phase) complete all as specified and directed by Engr-in-Charge. NoTE:- Minimum 02 Electricians required from 0900 hrs to 1700 hrs continuously for attending day to day complaints in contract period (Except in Gazetted/Weekly holidays)

M/s Bombay Novelty Stores

M/s Pal Builders

Pelectricals

sudarshan builders

machine vision plus

M/S S. SINGH TRADERS

Nirmal Construction

suvidhiconstruction