Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.8 LAccepted-AOC 205 PARSHAV VIHAR PLOT NO 50 IP EXTN PARPARGANJ DELHI 110092 | SHAHDARA | DELHI | 110092 | ₹22.8 L Quoted ₹25.0 L | L1 | Accepted-AOC BEING LOWEST |
| 2 | L2₹27.0 LRejected-Finance | ₹27.0 L | L2 | Rejected-Finance BEING NOT LOWEST |
| 3 | L3₹28.8 LRejected-Finance 164 HIRANI NAGAR OPP SIDDHI VINAYAK TEMPLE MADHAPAR KUTCH 370 020 | KACHCHH | GUJARAT | 370020 | ₹28.8 L | L3 | Rejected-Finance BEING NOT LOWEST |
| Sl No | Description | Qty | Unit | Pelectricals L3 | SANJEEV ENTERPRISES L1 | Tanveer Associates L2 |
|---|---|---|---|---|---|---|
| 1.00 | Supply & fix in replacement of ETC based Non-Pressurized and Non-Heat-Exchanger Solar Water Heater Storage Tank of size 100 LPD capacity upto G+3 Bldgs including all accessories at intel & outlet with following specification:-
Inner Tank & Dish end: 2 mm thick G.I.
Max Working Pressure: 0.5 kg/cm2 .
Inner Coating: Anti Corrosive, Heat Resistant, Marine Epoxy Coating.
Outer Coating: Seven Tank Process and Pure Polyester Powder Coating.
Insulation: 50 mm, High Density, Machine Injected, PUF Insulation.
Outer Cladding: 0.45 mm G.I. with Seven Tank Process and Pure Polyester Powder Coating.
Side Cover: G.I. with Seven Tank Process and Pure Polyester Powder Coating.
Inlet / Outlet Socket: 1" BSP, 4 mm thick with C-Class Coating and Outside Protection. Electric Backup Socket: 1.25" BSP, 4 mm thick with C-Class Coating and Outside Protection.complete all as specified and directed.
Note:-(i) The existing tank demolition shall included in the quoted rate.
(ii) The existing tank dismantling and deposited to MES store yard shall include in the quoted rate.
(iii) All T & P/vehicle required for install of solar heater will included in the quoted rate. | 55 | EACH | 18,500 ₹10.2 L | 18,000 ₹9.9 L | 18,000 ₹9.9 L |
| 2.00 | Supply & fix in replacement of ETC based Non-Pressurized and Non-Heat-Exchanger Solar Water Heater Storage Tank of size 200 LPD capacity upto G+3 Bldgs including all accessories at intel & outlet with following specification:-
Inner Tank & Dish end: 2 mm thick G.I.
Max Working Pressure: 0.5 kg/cm2 .
Inner Coating: Anti Corrosive, Heat Resistant, Marine Epoxy Coating.
Outer Coating: Seven Tank Process and Pure Polyester Powder Coating.
Insulation: 50 mm, High Density, Machine Injected, PUF Insulation.
Outer Cladding: 0.45 mm G.I. with Seven Tank Process and Pure Polyester Powder Coating.
Side Cover: G.I. with Seven Tank Process and Pure Polyester Powder Coating.
Inlet / Outlet Socket: 1" BSP, 4 mm thick with C-Class Coating and Outside Protection. Electric Backup Socket: 1.25" BSP, 4 mm thick with C-Class Coating and Outside Protection.complete all as specified and directed.
Note:-(i) The existing tank demolition shall included in the quoted rate.
(ii) The existing tank dismantling and deposited to MES store yard shall include in the quoted rate.
(iii) All T & P/vehicle required for install of solar heater will included in the quoted rate | 10 | EACH | 24,000 ₹2.4 L | 20,000 ₹2 L | 20,000 ₹2 L |
| 3.00 | Material & labour for removing old broken/damaged solar water evacuated vacuum tube and supply and fix in replacement soalr water evacuated vacuum tube made of borosilicate glass of size 58*1800 mm,inner tube of outer surface coated with (Al-N-Al) for excellent solar radiation and absorption high efficiency three layers tube suitable for 100/200 LPD with proper airtight rubber white o ring and black o ring washer and whichever be required to make servicable of this item complete all as specified and directed by Engineer-in-Charge. | 650 | EACH | 625 ₹4.1 L | 350 ₹2.3 L | 310 ₹2.0 L |
| 4.00 | Supply and laying in replacement of 20mm outer dia CPVC pipes SDR 11 including plain CPVC with all fittings on wall/ceiling on laying in floor/wall complete with proper steel sadding of half meter apart of each complete all as specified and directed by Engineer-in-Charge. | 1,340 | RUNNING METRE | 190 ₹2.5 L | 200 ₹2.7 L | 210 ₹2.8 L |
| 5.00 | Material & labour for in replacement GI pipe 15 mm bore medium grade, ISI marked with and including all fittings complete fixed to walls/ceiling or laid in floors including taking up/down existing old pipe complete all as specified and directed by Engineer-in-Charge. | 165 | RUNNING METRE | 250 ₹41,250 | 200 ₹33,000 | 210 ₹34,650 |
| 6.00 | Supply & fix in repairs rotational moulded polythene white water storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 200 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed by Engineer-in-Charge | 65 | EACH | 2,450 ₹1.6 L | 2,000 ₹1.3 L | 2,700 ₹1.8 L |
| 7.00 | Supply and fix in replacement of 20mm bore float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screw for iron pipe brass ferrule (Minium weight 210 gm complete with all fittings complete all as specified and directed by Engineer-in-Charge. | 65 | EACH | 600 ₹39,000 | 1,000 ₹65,000 | 1,200 ₹78,000 |
| 8.00 | Supply & fixin replacement of 15mm bore bib taps ISI marked cast copper alloy fancy type chroumium plated with crutch butterfly handle screw down for iron pipe or brass ferrule complete all as specified and directed by Engineer-in-Charge. | 65 | EACH | 750 ₹48,750 | 270 ₹17,550 | 350 ₹22,750 |
| 9.00 | Supply & fixing in replacement of CPVC gate valves, screwed/plain both ends for iron/pvc pipe of size 20 mm dia complete all as specified and directed by Engineer-in-Charge. | 130 | EACH | 700 ₹91,000 | 250 ₹32,500 | 370 ₹48,100 |
| 10.00 | Material & labour for dismantling of PCC foundation and Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and directed by Engineer-in-Charge. | 2 | CUBIC METRE | 1,100 ₹2,200 | 6,900 ₹13,800 | 7,000 ₹14,000 |
Updated dates
Tender Value
₹23.3 L
EMD Value
₹46,600
Closing Date
6 Dec 2025, 6:00 pmClosed
GE (AF) BHUJ
GE (AF) BHUJ ,KHAVDA ROAD, BHUJ GUJARAT-370001
SPECIAL REPAIR TO SOLAR WATER HEATERS FOR CERTAIN SMQs AT AF STN BHUJ
2025_MES_718139_7
8832/V/E8
Open Tender
Electrical and Maintenance Works
120 days
GE (AF) BHUJ
AS PER NOTICE OF TENDER
7 documents required · 7 mandatory
₹500
GE (AF) BHUJ
₹46,600
Yes
15 Jan 2026
17 Nov 2025
8 Dec 2025
17 Nov 2025
6 Dec 2025
24 Nov 2025
Amount
Material & labour for removing old broken/damaged solar water evacuated vacuum tube and supply and fix in replacement soalr water evacuated vacuum tube made of borosilicate glass of size 58*1800 mm,inner tube of outer surface coated with (Al-N-Al) for excellent solar radiation and absorption high efficiency three layers tube suitable for 100/200 LPD with proper airtight rubber white o ring and black o ring washer and whichever be required to make servicable of this item complete all as specified and directed by Engineer-in-Charge.
Supply and laying in replacement of 20mm outer dia CPVC pipes SDR 11 including plain CPVC with all fittings on wall/ceiling on laying in floor/wall complete with proper steel sadding of half meter apart of each complete all as specified and directed by Engineer-in-Charge.
Material & labour for in replacement GI pipe 15 mm bore medium grade, ISI marked with and including all fittings complete fixed to walls/ceiling or laid in floors including taking up/down existing old pipe complete all as specified and directed by Engineer-in-Charge.
Supply & fix in repairs rotational moulded polythene white water storage tank triple layered (Cylindrical, vertical with closed top, ISI marked) hoisted and fixed in position all as specified in SSR- Part-I of capacity 200 ltrs including taking down existing tank also including provision of 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms) complete all as specified and directed by Engineer-in-Charge
Supply and fix in replacement of 20mm bore float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screw for iron pipe brass ferrule (Minium weight 210 gm complete with all fittings complete all as specified and directed by Engineer-in-Charge.
Supply & fixin replacement of 15mm bore bib taps ISI marked cast copper alloy fancy type chroumium plated with crutch butterfly handle screw down for iron pipe or brass ferrule complete all as specified and directed by Engineer-in-Charge.
Supply & fixing in replacement of CPVC gate valves, screwed/plain both ends for iron/pvc pipe of size 20 mm dia complete all as specified and directed by Engineer-in-Charge.
Material & labour for dismantling of PCC foundation and Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of tube support for 100 LPD ETC System (10 hole of 58 mm O.D.) complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of brass Non return valve of size 20 mm complete all as specified and directed by Engineer-in-Charge.
Material & labour for taking down defective existing MS framed supports for (cold water tank/Stainless steel tank/Solar ETC based) and Supply, fabrication and fixing of mild steel frame/staging / height for placing of cold water tank/Stainless steel tank/Solar ETC based for solar water heater made out of mild steel angle iron 40 x 40 x 6 mm, MS flat, plates of size 50 x 6 mm etc. including nut, bolts etc. including welding ,bending cold , or hot in any shape or size as indicated or directed and inclusive of one red oxide primer coat ,one under coat and one finishing coat of synthetic enammel paint including grouting in PCC block of 1:2:4 complete.(PCC to be measured and paid for separately in respective section) complete all as specified and directed by Engineer-in-Charge.
Tanveer Associates (BID ID -3490069)
Pelectricals (BID ID -3485325)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
PS8832.pdf
Tender Documents • 0.72 MB
BOQ_828759.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid
