Construction work of Semen Production Center, Bhoosa Store and Animal Treatment Clinic at the Premises of Deep Frozen Semen Production Center at Pashulok, Shyampur, Rishikesh (Dehradun)

Amount

Supply of AC 230/250 volts, 50 HZ energy efficient ceiling fan with standard down rod, blades, 2 nos. caps etc. complete 1200 mm sweep

Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete 300 mm sweep 900 rpm

Supply of type fluorescent tube light fitting suitable for 1*18w fluorescent tube complete including tubes etc. on surface complete in all respects

Supply of Square LED surface ceiling Light Flat panel which provides soft-light and glare free symmetrical illumination LEDs 36 W LED as approved by Engineer in charge complete in all respect.

Supply of LT XLPE PVC aluminium Unarmoured cable 50 Sq.mm 4core 1100 volt.

Supply of LT XLPE PVC aluminium Unarmoured cable 150 Sq.mm 4core 1100 volt.

Supply of ADP Octagonal Pole single Arm 6 m. height. Compitable for post top range. as approved by Engineer in charge with making connection complete in all respect. (Rate taken from GeM) poles with single bracket

Supply & Installation of LED Street light Yes Wled Luminaire Light approved by Engineer in charge complete in all respect. (Rate taken from GeM) Cat AA (seg.)

Supplying and laying of aluminium conductor PVC insulated armoured,served sheathed cable 1100 Volots grade at depth of 750 mm below ground lavel over a cushion of 75 mm . Thick sand around and protected with burnt bricks on sides and on top.On surface the cable run shall be fixed on M.s. clamp etc. of suitable size as or directed by the Engineer Incharge in all respects.The armouring of the cable shall be properly connected with the earth conductor by clamp etc.(havells.plaza) 50 sq.mm.3½ core Cat.A

Supply and erection Dynamic POWER -DYNAMIC POWER SOLUTION IS 8623 Draw out type power control center panel (pcc panle) Incoming 300 Amp.ACB TPN-1 No Outgoing 63amp TPN-3 NOS, 40 amp TPN-1 NOS, 25amp TPN-1 NOS (i) Cat A Cubical type

Supply of type fluorescent tube light fitting suitable for 1*18w fluorescent tube complete including tubes etc. on surface complete in all respects

Supply of LED Tube Light (Retrofit Type) 22 Watts as approved by Engineer in charge complete in all respect. (Rate taken from GeM)

Supply of LT XLPE PVC aluminium Unarmoured cable 50 Sq.mm 4core 1100 volt.

Supply of LT XLPE PVC aluminium Unarmoured cable 150 Sq.mm 4core 1100 volt.

Supply of ADP Octagonal Pole single Arm 6 m. height. Compitable for post top range. as approved by Engineer in charge with making connection complete in all respect. (Rate taken from GeM) poles with single bracket

Supply & Installation of LED Street light Yes Wled Luminaire Light approved by Engineer in charge complete in all respect. (Rate taken from GeM) Cat AA (seg.)

Supplying and laying of aluminium conductor PVC insulated armoured,served sheathed cable 1100 Volots grade at depth of 750 mm below ground lavel over a cushion of 75 mm . Thick sand around and protected with burnt bricks on sides and on top.On surface the cable run shall be fixed on M.s. clamp etc. of suitable size as or directed by the Engineer Incharge in all respects.The armouring of the cable shall be properly connected with the earth conductor by clamp etc.(havells.plaza) 50 sq.mm.3½ core Cat.A

Supply of AC 230/250 volts, 50 HZ energy efficient ceiling fan with standard down rod, blades, 2 nos. caps etc. complete 1200 mm sweep

Supply of type fluorescent tube light fitting suitable for 1*18w fluorescent tube complete including tubes etc. on surface complete in all respects

Supply of LT XLPE PVC aluminium Unarmoured cable 50 Sq.mm 4core 1100 volt.

Supply of LT XLPE PVC aluminium Unarmoured cable 150 Sq.mm 4core 1100 volt.

Supply of ADP Octagonal Pole single Arm 6 m. height. Compitable for post top range. as approved by Engineer in charge with making connection complete in all respect. (Rate taken from GeM) poles with single bracket

Supply & Installation of LED Street light Yes Wled Luminaire Light approved by Engineer in charge complete in all respect. (Rate taken from GeM) Cat AA (seg.)

Supplying and laying of aluminium conductor PVC insulated armoured,served sheathed cable 1100 Volots grade at depth of 750 mm below ground lavel over a cushion of 75 mm . Thick sand around and protected with burnt bricks on sides and on top.On surface the cable run shall be fixed on M.s. clamp etc. of suitable size as or directed by the Engineer Incharge in all respects.The armouring of the cable shall be properly connected with the earth conductor by clamp etc.(havells.plaza) 50 sq.mm.3½ core Cat.A

S.S 304 Table with Cupboard (Exterior Cold Room Work Station) Size :- 4”(L) x 30”(W) x 35.63”(Ht.) # Table made out from S.S 304, 16 Swg 2B Prime Sheet. # Table Bottom side 1 No Cabinet and 4 Drawer with Handle. # Top side Framing with 3 Nos. Cupboard (Size:- 54”(L) x 16”(W) x 22”(Ht.) with Handle. # Bottom side 4 Nos PU Bracket Wheel with Break :- 3” x 1 ½”. # Finish in Matt Polish. * If Required in S.S 316 Add 30% On Rate

S.S 304 Table with Trolley (Freezer Computer Station) Size :- 24”(L) x 24”(W) x 35.63”(Ht.) # Table Made out from S.S 304, 16 Swg 2B Prime Sheet. # Table Bottom side Half Shelf Provided. # Bottom side 4 Nos PU Bracket Wheel with Break :- 3” x 1 ½”. # Finish in Matt Polish. * If Required in S.S 316 Add 30% On Rate

S.S 304 Table with Cupboard (Media Prep 1) Size :- 72”(L) x 30”(W) x 35.61”(Ht.) # Table made out from S.S 304, 16 Swg 2B Prime Sheet. # Table Bottom side 1 No Cabinet and 4 Drawer with Handle. # Top side Framing with 3 Nos. Cupboard (Size:- 72”(L) x 16”(W) x 19”(Ht.) with Handle. # Bottom side 4 Nos PU Bracket Wheel with Break :- 3” x 1 ½”. # Finish in Matt Polish. * If Required in S.S 316 Add 30% On Rate

S.S 304 Table with Trolley (Media Prep 2) Size :- 36”(L) x 30”(W) x 35.63”(Ht.) # Table Made out from S.S 304, 16 Swg 2B Prime Sheet.

# Table Bottom side Shelf Provided. # Bottom side 4 Nos PU Bracket Wheel with Break :- 3” x 1 ½”. # Finish in Matt Polish. * If Required in S.S 316 Add 30% On Rate S.S 304 Table with Trolley (Media Prep 3) Size :- 66”(L) x 30”(W) x 35.63”(Ht.) # Table made out from S.S 304, 16 Swg 2B Prime Sheet. # Table Bottom side 2 Cabinet with Handle and Lock and 4 Drawers with Handle. # 4 Legs with PU Bracket Wheel with Break :- 3” x 1 ½”. # Finish in Matt Polish. * If Required in S.S 316 Add 30% On Rate

S.S 304 Table with Cupboard (Media Prep 4) Size :- 60”(L) x 30”(W) x 35.63”(Ht.) # Table made out from S.S 304, 16 Swg 2B Prime Sheet. # Top Side Framing with Cupboard with 2 Doors with Handle (Size :- 30”(L) x 16”(W) x 22”(Ht.). # Bottom side 4 Nos Legs with Caster Bush. # Finish in Matt Polish. * If Required in S.S 316 Add 30% On Rate

S.S 304 Table with Cupboard (Sterilization 1 ) Size :- 54”(L) x 30”(W) x 35.63”(Ht.) # Table made out from S.S 304, 16 Swg 2B Prime Sheet. # Table Bottom side 1 No Cabinet and 4 Drawer with Handle. # Top side Framing with 3 Nos. Cupboard (Size:- 54”(L) x 16”(W) x 22”(Ht.) with Handle. # Bottom side 4 Nos PU Bracket Wheel with Break :- 3” x 1 ½”. # Finish in Matt Polish. * If Required in S.S 316 Add 30% On Rate

S.S 304 Table with Cupboard (Sterilization 2 ) Size :- 72”(L) x 30”(W) x 35.61”(Ht.) # Table made out from S.S 304, 16 Swg 2B Prime Sheet. # Table Bottom side 2 Nos Cabinet with Handle and Lock and 4 Drawer with Handle. # Top side Framing with 3 Nos. Cupboard (Size:- 72”(L) x 16”(W) x 19”(Ht.) with Handle. # Bottom side 4 Nos PU Bracket Wheel with Break :- 3” x 1 ½”. # Finish in Matt Polish. * If Required in S.S 316 Add 30% On Rate

S.S 304 Table with Trolley (Sterilization- Auto Clave Station ) Size :- 72”(L) x 36”(W) x 35.63”(Ht.) # Table made out from S.S 304, 16 Swg 2B Prime Sheet.

S.S 304 Table with Cupboard (Sterilization-Oven Station) Size :- 72”(L) x 36”(W) x 35.63”(Ht.) # Table made out from S.S 304, 16 Swg 2B Prime Sheet. # Table Bottom side 1 Cabinet with Handle and Lock and 4 Drawers with Handle. # 4 Legs with PU Bracket Wheel with Break :- 3” x 1 ½”. # Finish in Matt Polish. * If Required in S.S 316 Add 30% On Rate

S.S 304 Table with Cupboard (BH-Ejec Prep Station and Parts Storage) Size :- 72”(L) x 30”(W) x 35.61”(Ht.) # Table made out from S.S 304, 16 Swg 2B Prime Sheet. # Table Bottom side 1 No Cabinet and 4 Drawer with Handle.

# Top side Framing with 2 Nos. Cupboard (Size:- 72”(L) x 16”(W) x 30”(Ht.) with 2 Nos. Handle. # Bottom side 4 Nos. PU Bracket Wheel with Break :- 3” x 1 ½”. # Finish in Matt Polish. * If Required in S.S 316 Add 30% On Rate S.S 304 Table with Cupboard (Check in Workstation-R) Size :- 72”(L) x 30”(W) x 35.61”(Ht.) # Table Made Out from S.S 304, 16 Swg 2B Prime Sheet. # Table Bottom Left and Right side Cabinet with Handle. # Table Top Left Side Half Framing with 2 Shelf (Size : 36”(L) x 12”(W)) # Bottom side 4 Nos. PU Bracket Wheel with Break :- 3” x 1 ½”. # Finish in Matt Polish. * If Required in S.S 316 Add 30% On Rate

S.S 304 Table with Cupboard (Cold Room Back Wall) Size :- 60”(L) x 30”(W) x 35.61”(Ht.) # Table made out from S.S 304, 16 Swg 2B Prime Sheet. # Bottom side Shelf Provided. # Bottom side 4 Nos Legs with Caster Bush. # Finish in Matt Polish. * If Required in S.S 316 Add 30% On Rate

S.S 304 Table with Cupboard (Cold Room Side Wall) Size :- 60”(L) x 30”(W) x 35.61”(Ht.) # Table made out from S.S 304, 16 Swg 2B Prime Sheet. # Top side Framing with 1 Shelf Provied (Size :- 60”(L) x 12”(W)). # Bottom side Sink with Handle provided. # 4 Legs with PU Bracket Wheel with Break :- 3” x 1 ½”. # Finish in Matt Polish. * If Required in S.S 316 Add 30% On Rate

S.S 304 Table with Cupboard (Drop Delay Microscope Stand) Size :- 20”(L) x 22”(W) x 41.50”(Ht.) # Table made out from S.S 304,16 Swg 2B Prime Sheet. # Table having 4 Nos Drawer with Handle. # Bottom side 4 Nos Legs with Nylon Bush. # Finish in Matt Polish. * If Required in S.S 316 Add 30% On Rate

S.S 304 Table with Cupboard (Sample Prep QC Station) Size :- 54”(L) x 30”(W) x 35.63”(Ht.) # Table made out from S.S 304, 16 Swg 2B Prime Sheet. # Table Bottom side 1 No Cabinet and 4 Drawer with Handle. # Top side Framing with 3 Nos. Cupboard (Size:- 54”(L) x 16”(W) x 22”(Ht.) with Handle. # Bottom side 4 Nos PU Bracket Wheel with Break :- 3” x 1 ½”. # Finish in Matt Polish. * If Required in S.S 316 Add 30% On Rate

S.S 304 Table with Cupboard (Straw Printer Work Station) Size :- 60”(L) x 30”(W) x 35.61”(Ht.) # Table Made out from S.S 304, 16 Swg 2B Prime Sheet. # Table Top Left side Framing with 2 Nos Cabinet with Handle. # Bottom side 1 No Cabinet with Handle and 4 Drawer with Handle. # 4 Legs with PU Bracket Wheel with Break :- 3” x 1 ½”.

S.S 304 Sink Table Size :- 66’’(L) x 30”(W) x 35.61”(Ht.) Sink Size :- 24”(L) x 24”(W) x 18”(Ht.) # Sink Table made out from S.S 304, 16 Swg 2B Prime Sheet. # Sink Table Open Type From Bottom Side. # Pipe Structure Made Out From SS Round Pipe: Dia 38mm X 16Swg. # Sink Having Faucets Hole in Center of both Sink and Drainage Hole With Drainage Hole. # Bottom Side Of Leg Provide Nylon Solid Bush. # Finish In Matt Polish.

S.S. 304 Multipurpose Trolley With 02 Nos. Layer Trays Size:-700mm(L) x 400mm(W) x 900mm(Ht) With Handle + Wheel Tray Size:- 700mm(L) x 400mm(W) x 2”(Ht) # Trolley Tray Made Out From S.S.304, 16Swg Prime Sheet

S.S. 304 Multipurpose Trolley With 03 Nos. Layer Trays Size:-700mm(L) x 400mm(W) x 900mm(Ht) With Handle + Wheel Tray Size:- 700mm(L) x 400mm(W) x 2”(Ht) # Trolley Tray Made Out From S.S.304, 16Swg Prime Sheet # Pipe Structures Made Out From S.S.304 Square Pipe : 1 ” x 1”x 16Swg # Trolley Provide 1No S.S. Round Pipe: 1”(Dia) Handle For Transportation. # Bottom side provide wheel # Finish in Matt Polish. # Bottom Side 4Nos Swivel Type GI Bracket PU Wheel : 4”(Dia) x 1¼”(Thick) of 4Nos Wheel. Photo for Reference

S.S.304 Platform Trolley (Standard Type) Size:- 36”(L) x 24”(W) x 33”(Ht) With Handle Platform made out from S.S.304,16Swg prime sheet with bottom side of platform provide square pipe frame structure for durability of platform # Trolley provide 1No S.S. Round pipe : 1”(Dia) handle for transportation # Bottom side provide 4Nos Nylon Polymer Wheel : 3”(Dia) x 1¼”(Thick)

S.S.304 cGMP Hydraulic Pallet Truck Trolley Without Weigh Scale Capacity : 1 Tons (1000Kg) # Construction: S.S.304 4mm(Thick) cGMP Including Pump Unit. # Fork Drums: 1150mm(L) x 550mm(W) x 230mm Admit Between Forks. # Minimum Lowered Height of Forks: 90mm. # Maximum Lifted Height of Forks : 200mm. # Steering Wheels 02 Nos. : 200mm Ø x 50mm(Thick) Polymer (P.U.Wheel) Bonded Ball Bearing Wheels. # Load Rollers 02 Nos. : 75mm Ø x 75mm(Thick) Polymer (P.U.Wheel) Bonded Ball Bearing Wheels. {Ready In Stock}

S.S.304 Chairs (New Chair)

S.S.304 Rack With 4 Nos Fix Shelves. Size :- 1000mm(L) x 400mm (W) x 1600mm(Ht) # Rack Shelves made out from S.S.304,16Swg prime sheet # All side open type rack # Inside 4 nos shelves made 3 Nos Compartments # Distance provide between each Shelves : Equal(Ht). # Rack Pipe structure made out from S.S. Square pipe : 25mm x 25mm x 18Swg, and bottom side of Legs provide Nylon solid bush # Finish In Matt Polish.

S.S 304 Shoe Rack Size :- 1000mm(L) x 350mm(W) x 900mm(Ht.) # Shoe Rack made out from S.S 304,18 Swg 2B Prime Sheet. # Rack having 3 Nos Shelf & 4 Nos Compartment open Type. # Bottom side 4 Nos Legs with Nylon Bush. # Finish in Matt Polish.

S.S 304 Locker Size :- 620mm(L) x 350mm(W) x 1800mm(Ht. # Locker made out form S.S 304, 18 Swg 2B Prime Sheet. # Locker haivng top side 1 Compartment with Acrylic Double Door with Handle.Inside Rod provision for Hanger. # Bottom side 2 Nos Compartment with Individual door, Louver, Handle, Staple Lock. # Bottom side 4 Nos Legs with Nylon Bush. # Finish in Matt Polish.

S.S 304 Shoe Rack Size :- 1000mm(L) x 350mm(W) x 900mm(Ht.) # Shoe Rack made out from S.S 304,18 Swg 2B Prime Sheet. # Rack having 3 Nos Shelf & 4 Nos Compartment open Type. # Bottom side 4 Nos Legs with Nylon Bush. # Finish in Matt Polish.

S.S 304 Locker Size :- 1320mm(L) x 350mm(W) x 1800mm(Ht.) # Locker made out from S.S 304, 18 Swg 2B Prime Sheet. # Locker having Right Side Top 1 Compartment with Double Door with top side 2 Small Acrylic Glass Window, Handle & Cam Lock. Bottom side 2 Nos Compartment with Individual door, Louver, Handle, Staple Lock # Locker having Left Side 6 Nos Compartment with Individual Door, Louvers, Handle & Staple Lock. Inside Rod Provison for Hanger # Bottom side 4 Nos Legs with Nylon Bush. # Finish in Matt Polish.

Ladies Change Room S.S 304 Shoe Rack Size :- 1000mm(L) x 350mm(W) x 900mm(Ht.) # Shoe Rack made out from S.S 304,18 Swg 2B Prime Sheet. # Rack having 3 Nos Shelf & 4 Nos Compartment open Type. # Bottom side 4 Nos Legs with Nylon Bush. # Finish in Matt Polish.

S.S 304 Locker Size :- 1400mm(L) x 350mm(W) x 1800mm(Ht.) # Locker made out from S.S 304, 18 Swg 2B Prime Sheet. # Locker having Right Side 6 Nos Compartment with Individual Door, Louvers, Handle & Staple Lock. Inside Rod Provison for Hanger # Locker having Left Side Top 1 Compartment with Double Door with top side 2 Small Acrylic Glass Window, Handle & Cam Lock. Bottom side 2 Nos Compartment with Individual door, Louver, Handle, Staple Lock. # Bottom side 4 Nos Legs with Nylon Bush. # Finish in Matt Polish.

S.S.304 Round Stool With Revolving & Height Adjustable (Standard Type) Size : - 12”(Dia)Top x Height: 28 ½ ” (Max) To 25”(Min) # Top Of Stool Made Out From S.S.304 16Swg 2B Prime Sheet # Total Height: 28 ½ ” (Max) To 25”(Min) In Adjustable System # Bottom Side of Top SS Base Plate Welded, Stool Having Full Heavy Slotted Stud Adjustable System In MS # 3Nos Legs Structure in S.S. Pipe: 1” (Dia) x 16Swg. With Bottom Side Foot Rest Ring Provided & Total 3Nos Solid Nylon Bush Provided. # Finish In Mirror Polish.

S.S 304 Garment Cabinet with HEPA & UV Light (Sterile Sampling and Dispensing Area) Size :- 600mm(L) x 450mm(W) x 1950mm(Ht.) MINIPLEAT HEPA FILTER. (GASKET TYPE, 99.997%down TO 0.3 micron) 01. PRE FILTER. 02. MOTOR & BLOWER. 03. MAGNEHELIC GAUGE. (RANGE 0-25MM WC) 04. U.V. LIGHT. 05. HOUR METER. 06. S.S. HANDLE DOOR OPENING. 07. WHITE LIGHT. This Our Product Factory Photos

S.S.304 Visitor Cupboard (Secondary Gown Cupboard) For Change Room Size : 36”(L) x 15”(W) x Back Side 60”(Ht) & Front Side 56”(Ht) # Cupboard made out from S.S.304, 18Swg 2B Prime Sheet. # Cupboard Top-Front Side provide 3Nos Separate Compartment : 9”(Ht) with Doors + Knob For Fresh items (Mask / Cap / Shoe Cover) Keeping # Cupboard Left Part : 18”(L) x 15”(W) x 40”(Ht) :- Provided Appron Compartment with inside Appron Hanging Rod & Front Side Single Door + Handle. # Cupboard Right Part : 18”(L) x 15”(W) x 40”(Ht)2Nos Compartments :- Each Compartment provide Top side flap type door for used items throw inside the compartment && Bottom Side Provided Door for remove used items from the Compartment. # Bottom Side Provided Heavy Legs. # Finish In Matt Polish.

S.S.304 Cross Over Bench (COB) With One Side Only 3Nos Compartments Size :- 1200mm(L) x 350mm(W) x 550mm(Ht) Size :- 1500mm(L) x 350mm(W) x 550mm(Ht) # COB made out from S.S.304,18Swg prime sheet, COB top having bottom side “C” shape 16Swg stiffener. # COB design in close type body only front side open compartment with inside 2Nos shelves will divide compartment in 3Nos small shoe keeping compartments. # Each compartment inner height getting : 120mm(Ht). # Bottom side provide 4Nos leg : 100mm(Ht) with bottom side nylon bush.

S.S.304 Cross Over Bench (COB) With One Side Only 3Nos Compartments Size :- 1200mm(L) x 350mm(W) x 550mm(Ht) Size :- 1500mm(L) x 350mm(W) x 550mm(Ht) # COB made out from S.S.304,18Swg prime sheet, COB top having bottom side “C” shape 16Swg stiffener. # COB design in close type body only front side open compartment with inside 2Nos shelves will divide compartment in 3Nos small shoe keeping compartments. # Each compartment inner height getting : 120mm(Ht). # Bottom side provide 4Nos leg : 100mm(Ht) with bottom side nylon bush.

S.S.304 Sink Table with Back side Splash. Size :- 1000mm(L) X 650mm(W) X 850mm(Ht) Sink Size :- 400mm(L) X 500mm(W) X 250mm(Depth). # Sink Table Made Out Ss 304 16swg Prime Sheet, # Sink Table Open Type From Bottom Side. # Pipe Structure Made Out From Ss Square Pipe: 30mm X 30mm X 16swg. # Sink Having Drainage Hole With Drainage Hole. # Bottom Side Of Leg Provide Nylon Solid Bush. # Finish In Matt Polish.

S.S.304 Chair With Back Rest (Heavy Duty Type) In 1”(Dia) Pipe Size :- 16”(L) x 19”(W) x 38”(Ht) Seating Height :- 22”(Ht) Seating Plate :- 16”(L) x 14½”(W) Backrest Plate :- 16”(L) x 8½”(W) # Chair seating plate & backrest plate made out from S.S.304, 18Swg prime sheet. # Pipe structure made out from S.S.304 Round Pipe : 1”(Dia) x 18Swg. # Bottom side of leg provide Nylon solid bush. # Finish In Mirror& Matt Polish

S.S.304 Hand Wash Unit With Sink + Water Tap Size :- 450mm(L) x 350mm(W) x 850mm(Ht) Sink Size :- 400mm(L) x 300mm(W) x 150mm(Depth) # Hand Wash Unit Made Out SS 304 16Swg Prime Sheet, # Hand wash unit open type from bottom side. # Pipe structure made out from SS Square Pipe: 1” x 1” x 16Swg. # Sink having drainage hole with drainage coupling. # Bottom Side of leg provide nylon solid bush. # Finish in Matt Polish.

S.S.304 Platform Trolley (Standard Type) Size:- 36”(L) x 24”(W) x 33”(Ht) With Handle Platform made out from S.S.304,16Swg prime sheet with bottom side of platform provide square pipe frame structure for durability of platform # Trolley provide 1No S.S. Round pipe : 1”(Dia) handle for transportation # Bottom side provide 4Nos Nylon Polymer Wheel : 3”(Dia) x 1¼”(Thick) # Finish in Matt Polish

S.S. 304 Multipurpose Trolley With 02 Nos. Layer Trays Size:-700mm(L) x 400mm(W) x 900mm(Ht) With Handle + Wheel Tray Size:- 700mm(L) x 400mm(W) x 2”(Ht) # Trolley Tray Made Out From S.S.304, 16Swg Prime Sheet # Pipe Structures Made Out From S.S.304 Square Pipe : 1 ” x 1”x 16Swg # Trolley Provide 1No S.S. Round Pipe: 1”(Dia) Handle For Transportation. # Bottom side provide wheel # Finish in Matt Polish. # Bottom Side 4Nos Swivel Type GI Bracket PU Wheel : 4”(Dia) x 1¼”(Thick) of 4Nos Wheel. Photo for Reference

S.S. 304 Multipurpose Trolley With 03 Nos. Layer Trays Size:-700mm(L) x 400mm(W) x 900mm(Ht) With Handle + Wheel Tray Size:- 700mm(L) x 400mm(W) x 2”(Ht) # Trolley Tray Made Out From S.S.304, 16Swg Prime Sheet # Pipe Structures Made Out From S.S.304 Square Pipe : 1 ” x 1”x 16Swg # Trolley Provide 1No S.S. Round Pipe: 1”(Dia) Handle For Transportation. # Bottom side provide wheel # Finish in Matt Polish. # Bottom Side 4Nos Swivel Type GI Bracket PU Wheel : 4”(Dia) x 1¼”(Thick) of 4Nos Wheel. Photo for Reference

VOLTAS MAKE EQUIPMENT Installation, testing and commissioning Outdoor Units ODU : 16 HP

VOLTAS MAKE EQUIPMENT Installation, testing and commissioning Outdoor Units ODU : 14 HP

VOLTAS MAKE EQUIPMENT Installation, testing and commissioning Indoor units Hi-Wall Type Unit

VOLTAS MAKE EQUIPMENT Installation, testing and commissioning Indoor units 4-Way Cassette Type Unit

Refrigerant Piping, Drain Piping & Cabling Work Commissioning of VRF Setfree systems including topping R410A gas per site requirements

Supply, Installation, testing and commissioning of the insulated refrigerant piping for all the units with the refnets as per the specs. The insulation shall be of 13/19 mm thick nitrile rubber make through out the running length of the refrigerant piping. The piping shall be well supported at specifications Copper Piping for VRF

Providing and fixing rigid PVC piping complete with fittings, supports as per OEM STD and duly insulated with 6 mm thick closed cell nitrile rubber insulation. 25 mm dia

Providing and fixing rigid PVC piping complete with fittings, supports as per OEM STD and duly insulated with 6 mm thick closed cell nitrile rubber insulation. 32 mm dia

supply & fixing of control cum transmission wiring of shielded Copper conductor cable alongwith Pvc conduite for looping between indoor & outdoor VRF system & to main Central remote controller system 2 C X 1.5 Sq. mm

Lifting & Shifting of Indoors and Outdoors units

Comprehensive AMC (ANNUAL MAITINENCE COST) AFTER ONE YEAR WARRANTY 1st Year

Comprehensive AMC (ANNUAL MAITINENCE COST) AFTER ONE YEAR WARRANTY 2nd Year

Comprehensive AMC (ANNUAL MAITINENCE COST) AFTER ONE YEAR WARRANTY 3rd Year

Supplying and fixing Single Headed Internal Hydrant Valve oblique pattern with instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel ISi marked, conforming to IS : 5290 (LTB2 ), with 80 mm dia flanged inlet with ABS cap and chain complete with all accessoriesWATER TEST 21 Kgf/CM, 900 LPM DIS etc., as required. Make Atasi / Andex

Supply, Installation, Testing and Commissioning 100°/o synthetic flax canvas Non-percolating FIRE hose (Type A), LS.I 636 marked 163mm dia x 1Sm long with stainless steel male & female couplings (IS 903 marked 63 m.m. dia x 15 m long with stainless steel male and female couplings (IS 903 marked) bound and rivited to hose pipes with G.I. rivits and copper wire as required.

Supply ,installation testing and commissioning of 63 mm dis. Stanless steel Branch nozzale 18:903 material LTB-2 tested at 21 kgflcm2 hydraulic test na swater test at 14 Kgf/CM2

Supplying and Fixing First Aid Hose Reel, wall mounting swinging type complete with drum & bracket of MS construction! spray painted in Post office Red, confirming to IS 884/1995 with upto date amendments, complete with the following as required: 30 Meter long 20 mm dia water hose Thermoplastic (Textile reinforced) Type - 2 as per IS : 12585 25 mm dia gun metal ball valve & abs nozzle. Drum and brackets for fixing the equipments on wall. Connection from riser with stop valve (gun metal) & M.S. Pipe .

Supplying, installation, testing and commissioning of weather proof M.S cabinet size 900 mm x 600mm x 300mm deep fabricated from 1.6mm thick M.S. sheets and M.S angle 40mm x 40mm x 6mm complete with glass, locking arrangements to accommodate the following: - with key stand The cabinet shall be painted with one coat of primer and 2 coats of synthetic enamel paint of approved red shade.

Providing and fixing single stainless steel wight app 22-25 Kg suction collecting head as per IS : 904-1983, hose coupling (draw out connection) with female outlet as per 903 cpmplete with 150 m.m.dia G.I. suction pipe with puddle flange with strainer complete as per drawings.

Supply and installation testing of cat Iron body Non Return valve with nuts, bolts.\Washer, etc compte in all respects 100 mm Make Kartar / Castel

Supplying, laying.fixing, testing and commissioning of following sizes (NB) of ISI marked heavy ·s·c1ass M.S. pipes including cutting, threading, welding ,etc. and providing all fittings e.g. elbows, reducers, ctamps, hangers. flanges, gaskets, nuts. bolts and washers etc. including painting of pipes and fittings with red paint over a coat of raedy mixed primer of following sizes 100m.m. dia

Supplying, laying.fixing, testing and commissioning of following sizes (NB) of ISI marked heavy ·s·c1ass M.S. pipes including cutting, threading, welding ,etc. and providing all fittings e.g. elbows, reducers, ctamps, hangers. flanges, gaskets, nuts. bolts and washers etc. including painting of pipes and fittings with red paint over a coat of raedy mixed primer of following sizes 25m.m. dia Make Jindal / Surya

Supplying, Installation; Testing and Commissioning of Butterfly valves of PN 1.6 rating of following sizes with nitrile Bronze I G.M. seat duly ISi marked and stainless steel stem with lever/gear operation and cast iron body in powder coated finish for fire fighting application complete in all respects confirming to IS: 13095 as required. 100 MM dia Make kartar/ castel

Providing, Installation, Testing and Commissioning of Gun Metal Bal Valves with brass body chrome plated of following sizes as required. 25 mm dia

Providing, Installation, Testing and Commissioning of Air release valve with brass bod chrome plated of following sizes as required.

Supply testing and commissioning G.matel Foot valve 100 mm

Supply testing and commissioning of electric Driven Jockey Pump suitable for auto/manual operation and consistion of horizontal centrifugal & suction back pullout type capable ot delivery 7.5 H.P 70 mtr. Head model 32/30 make kirloskar/ mather and platt

SUPPLY AND INSTALLATION OF WATER CORSON DI-OXIDE 50 LTR . WHEEL MOUNTEDAN D STAND FIRE EXTINGHUSERW C02 ACTUALLU WORKS ON PAPER, WOOD, PAPER, PLASTIC, ETC AS PER IS 904 CATIAGE TYPE MAKE ATASI'/ ANDEX

SUPPLY AND INSTALLATION OF FOAM TYPE(AFFF 50 LTR. WHEEL MOUNTEDAND STAND FIRE EXTINGHUSER S ACTULY WORKS ON PAPER, WOOD, PAPER, PLASTIC,PTROL DIESEL PAINTS RUBBER WAX LAC AND ALL VOLATILE LIQUIDS ETC AS PER IS 904 CATTAGE TYPE MAKE ATASI'/ ANDEX

AIR RELEASED TANK WlTH SlREN .

S/F Kirlosker Deisel Engine With Pump & auto start Compleat with all ascessories , fixed in all .

S/F of Megapixa l .P, CMOS, IR 30-40m, 6mm Fixed lens , 1080P, 30fps, H.264, WDR, ONVIF, TDN, SD, 12VDC&24VAC

S/F of HD IP dome camera,Megapixal,CMOS,Vari-focal lens , 2.8-12mm , 720P ,30fps,H.264, ONVIF, TDN,SD,12VDC&24VAC, POE

S/F of HD IP speed dome/Video camera, megapixa;ll,CMOS optical zoom, 1080P ,30fps,H.264, ONVIF, TDN,SD,24VAC, outdoor wall mount(including one bracket,)

X protect professional camera licence multple server support and unlimited clients .

S/F of POE power over ethernet switch

S/F of Network video server with recording media ( Honeywell)

S/F of Personal computer (AIO) i5 , 2GB RAM , 500GB HDD with built in graphics on board .

N2 TYPE FIRE EXTINGUISER ( 2 NOS.)

CO2 TYPE FIRE EXTINGUISER ( 2 NOS.)

POWDER TYPE FIRE EXTINGUISER ( 2 NOS.)

TEMPSTAR Stainless Steel 304 Static and Dynamic Pass Through Boxes For cleanroom, Warranty 1 year.

Bidder Name

Amount

AMIT KUMAR(GSTN-05AMYPK7471K1Z8)

hind constructions(GSTN-05AAOPL4584A1ZR)

Aradhya Engineers and Constructions Pvt Ltd(GSTN-NA)

AMIT KUMAR

hind constructions

AMIT KUMAR

hind constructions