REPAIRING AND POLISHING OF WOODEN FURNITURE AT AF STN BHUJ

Amount

BED HARD WITH PLYWOOD TOP:- Removing following old and unserviceable parts / components of “Bed Plywood Top” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as specified and as directed by Engineer-in-Charge. (Drg No FD 246, 247)

Head rest complete.

Foot rest complete.

Plywood top with 12 mm thick BWR commercial.(Make kitply/Century /Greenply/ National/Bhutan

Long rail of first class hard wood (teak wood).

Short rail of first class hard wood (teak wood).

Both side veneered of Head Rest.

Both side veneered of Foot Rest

Table Dressing Gents with Mirror:- Removing following old and unserviceable parts / components of “Table dressing gents with mirror” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as specified and as directed by Engineer-in-Charge. (Drg No FD 230)

5 mm thick Looking Mirror with 06 mm thick plywood at the back.

Complete frame of first class hard wood (teak wood) for mirror .

Lower wooden box made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturer's instructions and other side french polishing, 6 mm thick back plywood & bright polished brass knob 40mm dia complete.

Peg Table:- Removing following old and unserviceable parts / components of “Peg Table” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as specified and as directed by Engineer-in-Charge. Drg No FD-236 & 277

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Table centre:- Removing following old and unserviceable parts / components of “Table centre” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as specified and as directed by Engineer-in-Charge. Drg No FD-235 & 274

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR, type BB with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Teapoy Wooden:- Removing following old and unserviceable parts / components of “Teapoy wooden” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as specified and as directed by Engineer-in-Charge. (Drg No FD-232 & 278)

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR, type BB with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Legs of first class hard wood (teak wood)

Short rail of first class hard wood (teak wood)

Long rail of first class hard wood (teak wood).

Table Computer:- Removing following old and unserviceable parts / components of “Table Computer” and S&F new parts / components of same size, existing pattern and the same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as specified and as directed by Engineer-in-Charge. (Drg No FD/E6/MAP/03)

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Drawer made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturer's instructions and other side french polishing, 6 mm thick bottom plywood with 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge.

Pull out tray for mouse made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturer's instructions and other side french polishing, with 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge.

Pull out tray for Key Board made out of 18 mm thick plywood (12 Nos of ply) grade BWR, type BB with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturer's instructions and other side french polishing, with 02 Nos Telescopic Channel of best quality as approved by Engr-In-Charge.

FOAM WITH & WITH OUT BACK:- Removing following old and unserviceable parts / components of “FOAM WITH & WITH OUT BACK” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, nut and bolt etc and polishing as shown on drawing & complete all as specified and as directed by Engineer-in-Charge. (Drg No FD-77,78)

Seat made of one piece of first class hard wood (teak wood).

Back rest made of one piece of first class hard wood (teak wood).

Table 3x3 wooden:- Removing following old and unserviceable parts / components of “Table 3x3 wooden” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as specified and as directed by Engineer-in-Charge. (Drg No FD-88 M, 291)

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Chair dining with cushioned:- Removing following old and unserviceable parts / components of “Chair dining with cushioned ” and S & F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/MAP-II/04)

Front Leg made of one piece of first class hard wood (teak wood).

Rear Leg made of one piece of first class hard wood (teak wood).

Bottom stiffener long made of one piece of first class hard wood (teak wood).

Bottom stiffener short made of one piece of first class hard wood (teak wood).

Short rail of seat made of one piece of first class hard wood (teak wood).

Long rail of seat made of one piece of first class hard wood (teak wood).

Complete seat made out of 75 mm thick 32 density foam with 12 mm thick plywood base, upholstered with rexin.

BOARD NOTICE OF SORTS

Removing unserviceable Green Baize cloth from Board Notice 4'X4' & Supply and fix new Green baize of best quality (as approved by the GE, costing not less than Rs.150 per Rm of standard availabele width) to board notice usiung appropriate size screws incliding minor repair work to wooden frame, all as specified and as shown on drawing No FD: 05-09.

All as per item No 10.01 above but Board Notice of size 4'X3'

All as per item No 10.01 above but Board Notice of size 6'X4'

All as per item No 10.01 above but Board Notice of size 8'X4'

All as per item No 10.01 above but Board Notice of size 8'X6'

Removing unserviceable plain broken sheet glass of front shutter (one shutter) and connected beading from Board Notice of size 4'X4' and supply and fixing plain sheet glass 3mm thich and 1st class hard wood beading of size 10 mm X 10mm with and incliding screws all as specified and as shown on drawing No FD 05-09. Make of glass-modiguard/saint Gobin/ Asahi/ Atul.

All as per item No 10.06 above but Board Notice of size 4'X3'

All as per item No 10.06 above but Board Notice of size 6'X4'

Removing unservicable soft board and plywood of one shutter of Board Notice of size 4'X4' and supply & fixing same size of new 12mm thick soft board and 6mm thick commercial BWR frade plywoood, ISI marked, all as specified and as shown on drawing No FD - 05-09. Make Kitply/Century/Green ply/ National/Bhutan Board.

All as per item No 10.09 above but Board Notice of size 4'X3'

All as per item No 10.09 above but Board Notice of size 6'X4'

M&L for preparing old posished and newly repaced parts of Board Notice of size 4'X4' and applying two coats of french polish to complete board notice all as specified and as shown on drawing No FD-05-09.

All as per item No 10.12 above but Board Notice of size 4'X3'

All as per item No 10.12 above but Board Notice of size 6'X4'

All as per item No 10.12 above but Board Notice of size 8'X4'

All as per item No 10.12 above but Board Notice of size 8'X6'

TABLE WRITING (STUDY):- Removing following old and unserviceable parts / components of “TABLE WRITING (STUDY) ” and S & F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and olishing complete all as shown on drawing & as directed by Engineer-in-charge. Drg No FD-33 & 275, 249

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Legs made of first class hard wood (teak wood).

Drawer made out of 12 mm plywood.

Shutters out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

CHAIR DINING:- Removing following old and unserviceable parts / components of “CHAIR DINING ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-279)

Front legs made of first class hard wood (teak wood).

Rear legs made of first class hard wood (teak wood).

long / short rail of seat made of first class hard wood (teak wood).

Stiffener of back made of first class hard wood (teak wood).

Short & long stiffener of bottom made of first class hard wood (teak wood).

TABLE DINING 6 / 8 PERSON:- Removing following old and unserviceable parts / components of “TABLE DINING 6 / 8 PERSON ” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-239 & 273)

Top for TABLE DINING 6 PERSON made out of 18 mm thick plywood (12 Nos of ply) grade BWR, type BB with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Top for TABLE DINING 8 PERSON made out of 18 mm thick plywood (12 Nos of ply) grade BWR, type BB with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Legs made of first class hard wood (teak wood).

Short rail made of first class hard wood (teak wood).

Long rail for TABLE DINING 6 PERSON made of first class hard wood (teak wood).

Long rail for TABLE DINING 8 PERSON made of first class hard wood (teak wood).

CHAIR WOODEN BOTTOM:- Removing following old and unserviceable parts / components of “CHAIR WOODEN BOTTOM” and S&F new parts / components of same size, existing pattern and same materialn of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-56, 285 & 225)

Front legs made of first class hard wood (teak wood).

Rear legs made of first class hard wood (teak wood).

Front / Rear / Side rail of seat made of first class hard wood (teak wood).

Stiffener of back made of first class hard wood (teak wood).

Short & long stiffener of bottom made of first class hard wood (teak wood).

Wooden bottom made out of 6 mm plywood.

Material & labour for Removing the existing worn-out cane and Recanning of furniture articles except chair verandah with new standard 2 mm wide plastic cane of semi circular type with border of 4 mm wide plastic cane all as specified and as directed by Engr-In-Charge.

Material & labour for cushion foam of 40 density with fabric cushion cover for seat of SOFA SET 5/4 seater, Superior quality of foam & cover. (Drg No FD-281. Tapestry cloth approved by GE not less than 340/- per mtrs.

CHAIR EASY:- Removing following old and unserviceable parts / components of “CHAIR EASY” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-229)

Front / Rear legs made of first class hard wood (teak wood).

Arm rest made of first class hard wood (teak wood).

Seat Front / Rear / side rail made of first class hard wood (teak wood).

Back Upper / bottom rail made of first class hard wood (teak wood).

TABLE DRESSING LADIES:- Removing following old and unserviceable parts / components of “TABLE DRESSING LADIES” and S & F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 251)

Looking Mirror of approved quality with back of 06 mm plywood and frame

Lower wooden box with drawer made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side with approved adhesive as per manufacturer's instructions and other side french polishing, 6 mm thick back plywood, 4 mm thick sliding glass, Aluminium channel etc complete all as per drawing.

TABLE BED SIDE:- Removing following old and unserviceable parts / components of “TABLE BED SIDE ” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD - 248 / 246 )

Back of 6 mm thick commercial face plywood.

Side (left or right) made out of 18 mm thick plywood with 1mm laminated sunmica top wood finish duly polished at bottom, with first class hardwood (teak wood) beading.

Top / middle shelf made out of 18 mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading.

CHAIR WRITING:- Removing following old and unserviceable parts / components of “CHAIR WRITING” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-250, 280, 285)

Front legs made of first class hard wood (teak wood).

Rear legs made of first class hard wood (teak wood).

Front / Rear / Side rail of seat made of first class hard wood (teak wood).

Stiffener of Back made of first class hard wood (teak wood).

Short / long stiffener of bottom made of first class hard wood (teak wood).

TABLE 3' x 2' WITH & WITHOUT DRAWER:- Removing following old and unserviceable parts / components of “TABLE 3' x 2' WITH & WITHOUT DRAWER” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-41, 224, 283)

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Leg made of first class hard wood (teak wood).

Long rail made of first class hard wood (teak wood).

Short rail made of first class hard wood (teak wood).

Long bottom stiffeners made of first class hard wood (teak wood).

Short bottom stiffeners made of first class hard wood (teak wood).

Complete drawer made out of 12 mm thick plywood.

TABLE DINING 1200MM X 900MM:-

S & F replacement of unserviceable top of the table with new top of size 4'X3' made out of prelaminated particle board of 18mm/19mm thich, exteriou grade, (Phenol bonded) confirming to IS 12823-1990 with 4 mm thick teak wood edging all around of the top duly french polished complete all as shown on drawing. Make: Green Ply/Kitply/ Duratuf/ Bhutan/ Novapan. (Drawing No FD/Map-II/03)

S&F in replacement of unserviceable legs with new legs of seasoned sheesham wood duly french polished, all as shown on drawing.

S&F in replacement of unserviceable long rails with new long rails of seaso9ned sheesham wood duly french polished all as shown on drawings.

S&F in replacemen t of old brackets with new brackets of seasoned sheesham wood in corners dyly french polished, complete all as shown on drawings.

S&F in replacement of unserviceable short rails with new short rails of seasoned sheeesham wood duly French polished ass as shown on drawing.

M & L for preoeration of old polished surfaces of the table dining 4'X3' repaired under item Nos 22.01 to 22.05 above by sxrapping and cleaning and applying one coat of raw sienna and two coats of french polish and matching with the new repaired parts, all as specified and as shown on drawing.

REPAIRS TO HAT STAND WITH MIRROR:- Removing following old and unserviceable parts / components of “REPAIRS TO HAT STAND WITH MIRROR” and S & F new parts / components of same size, existing pattern and same material, with beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-233)

5 mm thick looking mirror.

3 mm thick Veneered plywood.

9 mm thick Back Plywood.

Aluminium Peg.

CHAIR WRITING WITH PAD:-

Removal of inserviceable rear leg (one leg) for chair writing with pad & supply and fix Ist class hard wood (teak) well seasoned leg (one leg) for chair writing and prepareation of new surfaces and applying two coats of french polish on leg complete, all as specified and as shown on drawing Nos FD-250.

All as per Item No 24.01 above but front leg (one leg) for chair writing with pad

All as per Item No 24.01 above but side rail (one rail) for chair writing with pad

All as per Item No 24.01 above but front rail (one rail) of chair writinng with pad

All as per Item No 24.01 above but back rail (one rail) of chair writinng with pad

All as per Item No 24.01 above but handle with pad (one handle with pad) for chair writinng with pad

All as per Item No 24.01 above but handle (one handle) for chair writing with pad

All as per Item No 24.01 above but back rest (set of two) of chair writinng with pad

All as per Item No 24.01 above but one set of stiffener(set of three stiffeners) of chair writinng with pad

M & L for preparation of old polished surfaces of the chairs repaired under item Nos 24.01 to 24.09 above by scrapping and cleaning and applying one coat of raw sienna and two coats f french polish and matching with the new repaired parts, all as specified and as shown on drawing

Table 1520 mm x 860 mm x 760 mm:- Removing following old and unserviceable parts / components of “ Table 1520 mm x 860 mm x 760 mm” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-139)

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Legs made of first class hard wood (teak wood).

Top rails of section area 25 mm x 100 mm made of first class hard wood (teak wood).

Stiffener of sectional area 25 mm x 50 mm made of first class hard wood (teak wood).

SIDE BOARD:- Removing following old and unserviceable parts / components of “ SIDE BOARD” and S&F new parts / components of same size, existing pattern and same texture, with necessary beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD-26 (M) / 371)

Back made out of 4 mm thick plywood.

Top made out of 18 mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading.

Door made out of 18 mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading.

Drawer made out of 18 mm thick plywood with glossy sunmica with first class hardwood (teak wood) beading.

100 mm size steel hasp & staple.

knob 40 mm dia

Stool Dressing:- Removing following old and unserviceable parts / components of “Stool dressing” and S & F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD/MAP-II/07 (Sheet 3 of 3)

Legs made out of teak wood

Short rail made out of teak wood

Front / Rear long rail made out of teak wood.

Top made out of 18 mm thick plywood (12 Nos of ply) grade BWR with 3 mm thick teak wood lipping on edge, fixing of top with screws including 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, paste on exposed side of top with approved adhesive as per manufacturer's instructions and other side french polishing complete.

Chair Easy Cushioned Wooden:- Removing following old and unserviceable parts / components of “Chair Easy Cushioned Wooden” and S&F new parts / components of same size, existing pattern and same material of same texture, with necessary beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No FD -358)

Seat of 75 mm thick synthetic foam cushion of density 28 covered with leatherite rexin as approved by Engr -in-charge.

Back rest of 50 mm thick synthetic foam cushion of density 28 covered with leatherite rexin as approved by Engr -in-charge.

Hard rubber shoe

Repairs to Sofa set 3 Seater by Replacing of seat & back cushion foam 100 mm thick 40 density with fabric tapestry cloth as per sample approved by Engr - in - Charge. (Drg No. HOF-CSM-18, HOF-139,Godrej, Durian & Swadesi)

Sofa set 4 Seater:- Removing following old and unserviceable parts / components of “Sofa set 4 Seater” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No - FD - 281 / 258 / 373)

Arms made out of teakwood.

Front leg made out of teakwood.

Rear leg made out of teakwood.

Batten for seat and back made out of teak wood

Sofa set 5 Seater Removing following old and unserviceable parts / components of “Sofa set 5 Seater” and S&F new parts / components of same size, existing pattern and same material, with beading, screw, etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No - FD - 281 / 258 / 373)

Arms made out of teak wood.

Front leg made out of teak wood.

Rear leg made out of teak wood.

Batten for seat and back made out of teak wood

Bench Workshop:- Removing following old and unserviceable parts / components of “Bench Workshop” and S&F new parts / components of same size, existing pattern and same material, with beading, screw etc and polishing complete all as shown on drawing & as directed by Engineer-in-charge. (Drg No -GE (AF) J / FD / 02 / 01D & 145 M)

Top made out of first class hardwood.

Leg made out of teak wood of size 760 X 100 X 100 mm.

Shelf made of one pices first class hardwood (teak wood)

Rail made out of first class hard wood (teak wood) of size 2130mm X 100 X 100 mm.

S & F wooden bracket made of first class hard wood (Teak wood) fixing legs to long and short rail veries type of wooned table fixed with screw and duly polishing to match with existing complete as direction by Engr-in-charge.

Repairs to Almirah large steel and replacement of components:-

Material & labour for replacement of old unserviceable worn out shelves ( one shelf) made out of PBI sheet 1mm thick duly painted with two coats of synthetic enamel paint over a coat of primer complete as specified, as directed, and all as shown on drawings. Make-Nerolac/Asian/Berger. FD-1031.

Labour only for fixing of loose/hanging shelves properly all as directed.

Material & labour for replacement of old unserviceable MSCP handles complete with washers etc all as directed & approved by Engr-in-Charge.

Material & labour for replacement of old unserviceable lock brass with duplicate keys. The lock shall be of GI with six Brass levers, ISI Marked as approved by GE.

Material & labour for replacement of leg (one leg) made out of 1mm thick of PBI sheet channel base ends covered duly painted with two coats of synthetic enamel paint over a coat of primer complete as specified, as directed.

Material & labour for replacement of old unserviceable worn out base made out of PBI sheet 01mm thick duly painted with two coats of synthetic enamel paint over a coat of primer complete as specified, as directed.

Material & labour for replacement of MS hinges 75mm long (as approved by GE) by welding, the work shall be carried out by removing old hinges and smoothening the disturbed surfaces.

Material & labour for replacement of MS round bar (locking rod) 10mm dia with brass bush fitting in place of worn out fittings (locking system).

Repairs to Almirah medium steel & replacement of components:-

Material & labour for replacement of old unserviceable worn out shelves ( one shelf) made out of PBI sheet 1mm thick duly painted with two coats of synthetic enamel paint over a coat of primer complete as specified, as directed, and all as shown on drawings. Make-Nerolac/Asian/Berger. FD-1032.

Labour only for fixing of loose/hanging shelves properly all as directed.

Material & labour for replacement of old unserviceable mild steel chromium plated handles complete with washers etc all as shown on drawings and as approved.

Material & labour for replacement of old unserviceable GI lock brass lever with duplicate keys. The lock shall be GI with six brass lever, (ISI marked as approved)

Material & labour for replacement of leg (one leg) made out of 1mm thick of PBI sheet channel base ends covered duly painted with two coats of synthetic enamel paint over a coat of primer complete as specified, as directed, and all as shown on drawings.

Material & labour for replacement of old unserviceable worn out base made out of PBI sheet 01mm thick duly painted with two coats of synthetic enamel paint over a coat of primer complete as specified, as directed, and all as shown on drawings.

Material & labour for replacement of MS hinges 75mm long (as approved by GE) by welding, the work shall be carried out by removing old hinges and smoothening the disturbed surfaces and painting the disturbed surfaces to match surrounding.

Material & labour for replacement of MS round bar (locking rod) 10mm dia with brass bush fitting in place of worn out fittings (locking system).

Repairs to locker steel and replace-ment of components:-

Material & labour for replacement of old unserviceable worn out shelves (one shelf) made out of PBI sheet 1mm thick duly painted with two coats of synthetic enamel paint over a coat of primer fixed on and including 4 Nos MS cleats of PBI sheet 1mm thick made shape & size all as specified, shown on drawings and as directed.(FD-257 & F-1029)

Labour only for fixing of loose/hanging shelves properly all as directed.

Material & labour for replacement of old unserviceable aluminium anodised handles 100mm long, complete with washers etc all as shown on drawings and as approved.

Material & labour for replacement of old unserviceable MSCP hasp & staples 75mm long, complete all as shown on drawings and as approved.

Material & labour for replacement of MS hinges 75mm long (as approved by GE) by welding, the work shall be carried out by removing old hinges and smoothening the disturbed surfaces and painting the disturbed surfaces to match surrounding.

Material & labour for replacement of leg (one leg) made out of 1mm thick of PBI sheet channel base ends covered duly painted with two coats of synthetic enamel paint over a coat of primer complete as specified, as directed.

Material & labour for replacement of old unserviceable worn out base made out of PBI sheet 01mm thick duly painted with two coats of synthetic enamel paint over a coat of primer complete as specified, as directed.

Repairs to table office clerk steel and replacement of components:-

Supply & fix in replacement of unserviceable top (4’x2’-6”) of the table with new top made out of prelaminated particle board of 18mm/19mm thick, exterior grade, one side teak face (Phenol bonded), confirming to IS 12823-1990 with 4 mm thick teak wood edging all around of the top duly french polished complete all as shown on drawings. The top shall be fixed making appropriate fixing arrangements i, e, drilling of holes, tightening of top with appropriate size of screw. Make: Green Ply / Kitply / Duratuf / Bhutan Board.(FD-84(M) & FD-1004)

Material & labour for replacement of old unserviceable drawer (one drawer) with new drawer made to shape and size with 1mm thick PBI sheet including repairing the sliding surface of the drawer by smoothing the portion, denting/welding or any other means to enable all the three drawers of table to work smoothly.

Material & labour for replacement of old unserviceable locks with new GI locks with brass lever & duplicate keys.(ISI marked as approved by GE) complete all as specified, directed.

Material & labour for replacement of old unserviceable PVC shoes with new PVC shoes complete all as shown on drawings and as directed.

Repairs to table office officer steel and replacement of components:-

S&F in replacement of unserviceable top 5’x3’ of the table with new top made out of prelaminated particle board of 18mm/19mm thick, exterior grade, one side teak face (Phenol bonded), confirming to IS 12823-1990 with 4 mm thick teak wood edging all around of the top duly french polished complete all as shown on drawings. The top shall be fixed making appropriate fixing arrangements i, e, drilling of holes, tightening of top with appropriate size of screw. Make: Green Ply / Kitply / Duratuf / Bhutan Board.(FD-84(M) & FD-1004)

Material & labour for replacement of old unserviceable drawer (one drawer) with new drawer made to shape and size with 1mm thick PBI sheet including repairing the sliding surface of the drawer by smoothing the portion, denting/welding or any other means to enable all the three drawers of table to work smoothly.

Material & labour for replacement of old unserviceable locks with new brass locks with brass lever & duplicate keys.(ISI marked as approved by GE) complete all as specified, directed and as shown on drawings.

Material & labour for replacement of old unserviceable PVC shoes with new PVC shoes complete all as shown on drawings and as directed.

Repairs to chair tubular with arms steel and replacement of components:-

Removing existing unserviceable seat frame with cane plastic and replacing with and including seat made out of sheesham wood duly polished and caned with cane conforming to IS-5378-1994, type-1, 2mm wide plastic cane (White Colour) half round, border all around shall be caned with 3 mm wide cane plastic half round complete, in Godrej pattern, seat fixed with nuts and bolts to chair frame, including provision by welding of MS flat 25 X 3mm 02 Nos (front & back) beneath the seat all as specified and as shown on drawings and as directed by Engr-in-Charge.Make of cane: Indian Plastic, Garware Plastic, ‘SHAH’ brand or ‘Premier’.(FD-75)

-ditto- all as per item No 40.01 above but back of chair tubular steel with arms.

Material & labour for replacement of old unserviceable hand rest with new hand rest made out of sheesham wood duly polished complete all as shown on drawing and as specified.

Material & labour for replacement of old unserviceable PVC shoes with new PVC shoes complete all as shown on drawings and as directed.

Repairs to chair tubular steel without arms & replacement of components:-

Removing existing unserviceable seat frame with cane plastic and replacing with and including seat made out of sheesham wood duly polished and caned with cane conforming to IS-5378-1994, type-1, 2mm wide plastic cane (White Colour) half round, border all around shall be canned with 3 mm wide cane plastic half round complete, in Godrej pattern, seat fixed with nuts and bolts to chair frame, including provision by welding of MS flat 25 X 3mm 02 Nos (front & back) beneath the seat all as specified and as shown on drawings and as directed by Engr-in-Charge.Make of cane: Indian Plastic, Garware Plastic, ‘SHAH’ brand or ‘Premier’.(FD-75)

-ditto- all as per item No 41.01 but back of chair tubular steel without arms.

Material & labour for replacement of old unserviceable PVC shoes with new PVC shoes complete all as shown on drawings and as directed.

Repairs to table dinning ORs aluminum top & replacement of components:-

S&F in replacement of unserviceable top of the table with new top made out of 18mm thick commercial BWR Gde block board covered with 0.80 mm thick anodised aluminium sheet with 2” overlapping at edges, in one length, without a joint, fixed with and including headless nails Make: Green Ply / Kitply / Duratuf / Bhutan Board.(FD-165)

Material & labour for replacement of worn out old unserviceable frame with new frame made out of MS square 25mm 16 gauge tubes including stiffener wherever required duly welded, and painted to match with surroundings complete all as specified.

Repairs to Chair CBA special with hand rest and replacement of component:-

Removing existing unserviceable seat frame with cane plastic and replacing with and including seat made out of sheesham wood duly polished and caned with cane conforming to IS-5378-1994, type-1, 2mm wide plastic cane (White Colour) half round, border all around shall be canned with 3 mm wide cane plastic half round complete, in Godrej pattern, seat fixed with nuts and bolts to chair frame, including provision by welding of MS flat 25 X 3mm 02 Nos (front & back) beneath the seat all as specified and as shown on drawings and as directed by Engr-in-Charge.Make of cane: Indian Plastic, Garware Plastic, ‘SHAH’ brand or ‘Premier’.(FD-120(M))

-ditto- but all as per items No 43.01 above but back of chair special with hand rest.

Material & labour for replacement of hand rest (pair) with new handle rest in pairs made out of Sheesham wood duly polished complete all as specified.

Repairs to table 3'x2' steel with drawer and replacement of components:-

S&F in replacement of unserviceable top 3’x2' of the table with new top made out of prelaminated particle board of 18mm/19mm thick, exterior grade, one side teak face (Phenol bonded), confirming to IS 12823-1990 with 4 mm thick teak wood edging all around of the top duly french polished complete all as shown on drawings. The top shall be fixed making appropriate fixing arrangements i, e, drilling of holes, tightening of top with appropriate size of screw. Make: Green Ply / Kitply / Duratuf / Bhutan Board. (FD-1008))

Material & labour for replacement of old unserviceable drawer (one drawer) with new drawer made to shape and size with 1mm thick PBI sheet including repairing the sliding surface of the drawer by smoothing the portion, denting/welding or any other means to enable all the three drawers of table to work smoothly.(FD-120(M))

Material & labour for replacement of old unserviceable locks with new GI locks with brass lever with duplicate keys complete all as specified.

Material & labour for replacement of old unserviceable PVC shoes with new PVC shoes complete all as shown on drawings and as directed.

Material & labour for replacement of old unserviceable recessed handle with new handle complete all as shown on drawings and as directed.

Repairs to table 3'x2' steel with out drawer and replacement of components:-

Supply & fix in replacement of unserviceable top 3’x2' of the table with new top made out of prelaminated particle board of 18mm/19mm thick, exterior grade, one side teak face (Phenol bonded), confirming to IS 12823-1990 with 4 mm thick teak wood edging all around of the top duly french polished complete all as shown on drawings. The top shall be fixed making appropriate fixing arrangements i, e, drilling of holes, tightening of top with appropriate size of screw. Make: Green Ply / Kitply / Duratuf / Bhutan Board.

Material & labour for replacement of old unserviceable PVC shoes (one shoe) with new PVC shoes (one shoe) complete all as shown on drawings and as directed.

Repairs to table 3'x3' steel and replacement of components:-

Supply & fix in replacement of unserviceable top 3’x3' of the table with new top made out of prelaminated particle board of 18mm/19mm thick, exterior grade, one side teak face (Phenol bonded), confirming to IS 12823-1990 with 4 mm thick teak wood edging all around of the top duly french polished complete all as shown on drawings. The top shall be fixed making appropriate fixing arrangements i, e, drilling of holes, tightening of top with appropriate size of screw. Make: Green Ply / Kitply / Duratuf / Bhutan Board. (FD-1009

Material & labour for replacement of old unserviceable PVC shoes with new PVC shoes complete all as shown on drawings and as directed.

Repairs to Chair Varandah

M&L for removing existing old nylon newar from chair verandah and recanning of the chair verandah with high density polyethylene cane, 3.50 to 4mm wide, 0.50mm thick, half round, conforming to IS-5378-1994, type-1, white in colour, weaving in the pattern shown on drawing No FD-256/FD-359 or in Godrej pattern or as directed by the Engineer-in-Charge complete as specified and as directed.(FD-256)

S&F in replacement PVC shoes of chair verandah, white in colour, all as shown on drawing number FD-256/FD-359.

Material & labour for preparation of previously painted chair verandahs by thoroughly cleaning the surfce to remove dirts, oils, dust, rust flakes and paint flakes using wire brush or sand papers, damp clothe or as directed: priming the surfaces with anti corrosive primers using suitable sprayers; also applying metal enamel paint using sprayers till glossy finish is obtained; complete all as specified and as directed.

Book Case Steel with Glazed shutter

Material & labour for replacement of unserviceable lock of Book Case steel with glazed shutter ( except glass ) with new brass chromium plated lock of same size /specification, having duplicate keys, all as shown on drawings and as specified.(FD-1028)

Material & labour for replacement of unserviceable glass of Book Case Steel glazed shutter (one shutter) with new one of same size/specification. All as shown on drawings.

Repairs to Form with and without Back

Taking down unserviceable plank seat from form without back steel and supply & fix new 1st class hard wood (teak wood) plank of size 1525mm x 255mm x 25mm with screws to frame including applying two coats of french polish to exposed surfaces, all as shown on drawings. (FD-77(M))

All as per item No 48.01 above but for seat of Form with back steel of size 1800mmx255mmx25mm. All shown on drawings.(FD-78(M))

All as per item No 48.01 above but for back of Form with back of size 1800mmx150mmx19mm,all as shown on drgs.(FD-78(M))

Repairs to Chair School with Hand Boad

Taking down old unserviceable moulded PVC one piece seat and back from chair school with hand board and S&F new moulded PVC one piece seat and back to chair school with hand board, all as shown on drawing.(FD/E6/MAP/05)

Taking down old unserviceable writing board of chair school with hand board and S&F new 18/19mm thick pre-laminated particle board exterior gde (ISI marked) both side teak face of size 600mmx310mm with all around the PVC edging, all as shown on drawing.

M&L for replacement of Bracket made of 25 mm 16 Guage hollow MS pipe duly welded with and including 25mmx3mmx150mm ms flat all as shown on drawing.

Repairs to Chair Writing MAP

Taking down old unserviceable Seat of chair writing and S&F new seat with polyurethane foam 50 mm thick, with 50-55 density,fixed over and including12 mm thick BWR grade commercial plywood made to shape, duly covered with approved quality of tapestry cloth (costing not less than Rs 150 per Rm of standard available width), all as shown on drawing.

Taking down old unserviceable Back of chair writing and S&F new back with polyurethane foam 50 mm thick, with 50-55 density,fixed over and including12 mm thick BWR grade commercial plywood made to shape, duly covered with approved quality of tapestry cloth (costing not less than Rs 150 per Rm of standard available width), all as shown on drawing.

Material & labour for replacement of PVC Arm rest of chair writing MAP, all as shown on drawing.

Repairs to Chair Visitor Steel with cushion seat & back

M&L for replacement of existing old unserviceable cushion seat of chair visitor steel with new one made of 75 mm thick polyurethene foam of 32 density fixed over and including 8 mm thick commercial BWR grade plywood made to shape, duly covered with approved quality of tapestry cloth (costing not less than Rs. 150 per Rm of standadrd available width), all as shown on drawing.(PT)

All as per item No.52.01 above but cushioned back of chair visitor steel, all as shown on drawing.

Repairs to Chair Computers (MAP)

Material & labour for replacement of existing old unserviceable seat of chair computer with new one made of 75 mm thick polyurethene foam of 32 density fixed over 12 mm thick commercial BWR grade plywood ISI marked made to shape,duly covered with approved quality of tapestry cloth (costing not less than Rs. 150 per Rm of standard available width) and PVC leaping all around, all as specified on drawing.(FD/E6/MAP/01)

All as per item No 53.01 above but back of chair computer,all as shown on drawing.

Material & labour for replacement of unserviceable PVC Arm rest of chair computer MAP, all as shown on drawing.

Material & labour for replacement of superior quality castor wheel (one wheel) of chair computer with new one, all as specified on drawing.

Material & labour for replacement of hydraulic and tilting arrangement of chair computer with new one, all as shown on drawing.

Repairs to Chair Executive Revolving TP

Material & labour for replacement of existing old unserviceable cushion seat of chair executive revolving with new one made of 75 mm thick polyurethene foam of 32 density fixed over and including 12 mm thick commercial BWR grade plywood made to shape, duly covered with approved quality of tapestry cloth (costing not less than Rs. 150 per Rm of standard available width), all as shown on drawing.(TP)

All as per item No 54.01 above but back of chair revolving executive,all as shown on drawing.

Material & labour for replacement of unserviceable PVC Arm rest with new one of PVC Arm rest of chair revolving executive, all as shown on drawing.

Material & labour for replacement of superior quality castor wheel (one wheel) of chair revolving executive with new one, all as specified on drawing.

General Repairs

Material & labour for welding upto 5mm long welding to steel frame with electric welding and smoothening of the welded portion complete, all as shown on drawing.

Removing old and unserviceable rusted MS square/round pipe from all sorts of steel furniture i.e. Table Office clerk/Offrs steel, Table Dining ORsTable 3'x2' steel,Table 3''x3'steel , Chair Varandah etc. and supply and fixing new MS Square pipe /round pipe of existing size,shape & pattern, using following size of tubes, including painting with two coats of synbthetic enamel paint OG/White colour where as applicable to surfaces over a coat of red oxide primer. All as shown on drawing for pipes / tubes of size 25 mm MS square tube 1.6 mm wall thickness.

All as per item No 56 above but of size 20 mm dia MS pipe with 1.6 mm wall thickness.

Repairs to Charpoy GI Pipe plywood top

Removing unserviceable ply wood top from charpoy and supply and fix new 6'x3'x 12mm thick commercial BWR Gde plywood IS: 303-1989 marked, fixed with & including nuts, washers and bolts to frame work, complete all as specified and shown on drawing .Make : Kitply / Century / Green Ply / National / Bhtan board. (FD-220)

Taking out old broken threaded long rail of charpoy GI pipe and S&F new long rail made out of galvanised iron pipe 32 mm dia medium grade ISI marked Make : Jindal/Tata/Prakash Surya,after cutting & threading both ends 22 mm, all as shown on drawing and as directed by Engr-in-charge.

Making short rail out of unserviceable (broken) long rail obtained from 58.02 above, cutting, threading both ends 22 mm and fixing in replacement into the same or other existing frame. All as shown on drawings and as directed.

Making leg out of unserviceable (broken) short rail obtained from 58.03 above, cutting, threading one end 22 mm, providing & welding 3mm thick round 32mm dia round ms sheet on bottom and fixing in replacement into the same or other existing frame. All as shown on drawings and as directed.

Supply and fixing in replacement of three way elbow 32 mm dia 65 mm long (ISI marked) all shown on drawing & directed.

Taking out old broken check nuts 32 mm dia and supply and fixing new check nut GI 32 mm dia to Charpoy GI pipe plywood top all as shown on drawing & directed.

Supply and fixing in replacement of brackets of FMN set as per existing specification duly painted with synthetic enamel paint black colour. All shown on drawing.

Removing of old long rails (Minor damaged) from Charpoy GI pipe, cutting and threading one side upto 30mm and fixing in existing elbow as per drg.

Labour only for assembling and tightening of different loose components of charpoy GI pipe .All as specified and directed.

Repairs to bed hard steel (Map)

Removing unserviceable ply wood top from bes hard steel and supply and fix new 6'.5x3'x 12mm thick commercial BWR Gde plywood IS: 303-1989 marked, fixed with & including nuts, washers and bolts to frame work, complete all as specified and shown on drawing .Make : Kitply / Century / Green Ply / Bhtan board. (FD/E6/MAP/08)

Removing unserviceable head board from bed hard steel and fix new 18 mm thick prelaminated particle board with PVC edging all as shown on drawing and as directed by Engr-in-charge.

Removing unserviceable foot board from bed hard steel and fix new 18 mm thick prelaminated particle board with PVC edging all as shown on drawing and as directed by Engr-in-charge.

Removing unserviceable long rail (length appx 1.974m) MS tube side 25x65mmx18 gauge rect. C.R. pipe from bed hard steel and supply and fix new MS tube side 25x65mmx18 guage as per existing specification duly painted two coat of synthetic enamel paint blank colour over red oxide paint, all as shown on drawings and as directed by Engr-in-charge.

Removing unserviceable long rail (length appx 0.824m) MS tube side 38x38mmx18 gauge rect. C.R. pipe from bed hard steel and supply and fix new MS tube side 38x38mmx18 guage as per existing specification duly painted two coat of synthetic enamel paint blank colour over red oxide paint, all as shown on drawings and as directed by Engr-in-charge.

Removing unserviceable MS tube legs 32x32mmx18 gauge and supply and fixing new of MS tube legs 32x32mmx18 guage, two coat of synthetic enamel paint blank colour over red oxide paint, all as shown on drawings and as directed by Engr-in-charge.

Supply and fixing in replacement of stiffeners 25x25mm x18 gauge (appx length 0.824m) SQ MS tube two coat of synthetic enamel paint blank colour over red oxide paint, all as shown on drawings and as directed by Engr-in-charge.

Repairs to Charpoy with hard top (Map)

Removing unserviceable ply wood top from charpoy with hard top and supply and fix new 6'x3'x 12mm thick commercial BWR Gde plywood IS: 303-1989 marked, fixed with & including nuts, washers and bolts to frame work, complete all as specified and shown on drawing .Make : Kitply / Century / Green Ply / Bhtan board. (FD/MAP-II/01)

Removing of unserviceable long rail (length appx 1.98m) MS tube side 25x65mmx16 gauge from charpoy with hard top and supply and fix new MS tube side 25x65mmx16 guage as per existing specification duly painted two coat of synthetic enamel paint blank colour over red oxide paint, all as shown on drawings and as directed by Engr-in-charge.

Removing of unserviceable short rail (length appx 0.90m) MS tube side 25x65mmx16 gauge from charpoy with hard top and supply and fix new MS tube side 25x65mmx16 guage as per existing specification duly painted two coat of synthetic enamel paint blank colour over red oxide paint, all as shown on drawings and as directed by Engr-in-charge.

Supply and fixing in replacement of MS tube legs (appx length 440m) 32x32mmx16 gauge, two coat of synthetic enamel paint blank colour over red oxide paint, all as shown on drawings and as directed by Engr-in-charge.

Supply and fixing in replacement of MS plate 32x32x5 mm welded at bottom of legs and under which 3 mm thick rubber sheet fixed with adhesiv all shown on drawing & directed.

Supply and fixing in replacement of stiffeners 25x25mmx16 gauge (appx length 0.90m) MS tube two coat of synthetic enamel paint blank colour over red oxide paint, all as shown on drawings and as directed by Engr-in-charge.

Repair to Teapoy verandah and replacement of components

S&F in replacement of unserviceable top 3'X1'-6'' of the teapoy with new top made out of prelaminated particle board of 18mm/19mm thick, exterior grade, one side teak face (Phenol bonded), confirming to IS 12823-1990 with 4 mm thick teak wood edging all around of the top duly french polished complete all as shown on drawings. The top shall be fixed making appropriate fixing arrangements i, e, drilling of holes, tightening of top with appropriate size of screw. Make: Green Ply / Kitply / Duratuf / Bhutan Board. (FD-255 & FD-383)

Material and labour for replacement of old unserviceable PVC Shoes (one shoe) with new PVC shoes.

Material and labour for preparation of old painted surfaces of the following steel furniture article including removal of dent etc wherever necessary, and painting with one coat of synthetic enamel paint with spray gun as per existing colour and all as spcified and directed by Enge-In-Charge.

Almirah med steel (Drg No- FD 67/243/032)

Almirah large steel (Drg No- FD 67/1031)

Book case steel 1675x840x305(Drg No- FD-1028)

Book shelf open small steel (Drg No- FD-69 M)

Chair steel tubular w/o arms (Drg No- FD-75 M)

Chair CB steel w/o arms (Drg No- FD-75 M)

Rack 6 tier steel (Drg No- FD-1038)

Rack shoe steel (Drg No- FD/E6 MAP 02)

Rack steel adjustable 2475x900x500 steel(Drg No- TP)

Rack side with tray steel (Drg No- FD-97)

Steel shelving small (Drg No- FD/E6 MAP 18)

Steel shelving large (Drg No- FD/E6 MAP 19)

stool 2' height steel (Drg No- FD-81 M)

Table office officers steel (Drg No- FD-84 M, 1003)

Table office clerk steel (Drg No- FD-84 M, 1004)

Table 900X600X760 (steel frame particle board top) (Drg No- FD-1008)

Table with drawer steel frame 900X600X760 (Drg No- FD-1008)

Teapoy verandah (Drg No- FD 35/255/383)

Bed hard steel (Drg No- FD/E6/MAP/8(R))

Charpoy IP with hard top (Drg No- FD/MAP-II/01)

Chair school hard board (Drg No- FD/E6/MAP/05)

Locker bed side (Drg No- FD-1029)

Almira large glazed steel (Drg No- FD 104 M)

Box kit steel (Drg No- FD 90)

Chair CB "A" special with hand rest (Drg No- FD-120)

Chair writing steel (Drg No- FD-261, 360)

Chair folding steel with paddy (Drg No- FD-123)

Chair folding with cushion (Drg No- FD-123)

Form with/ without back (Drg No- FD-78M, 1027, 1028)

Ladder for loft steel (Drg No- FD-238)

Rack for stores (Drg No- FD-129)

Rack stationery steel (Drg No- FD-81M)

Rack pigeon hole steel (Drg No- FD-106M, 1037)

Stool steel (Drg No- FD-81M)

Trestle store room steel (Drg No- FD-1043)

Chair visitor (TP)

Table bed side map (Drg No-FD/E6/MAP/15(R))

Material and labour for preparation of old polished surface of the following wooden furniture article by emery paper to get the surfaces smooth and applying one or more coat of french polish/ clear varnish complete all as spcified and directed by Enge-In-Charge.

Almirah large with selves (Drg No- DB-4116) FD-109

Book shelf open large (Drg No- WDF-33)

Bed plywood (Drg No- FD-246)

Board notice (Drg No- GE (AF)J/FD-19-03) All size

Chair CBA (Drg No- DB-4124)

Chair dining (Drg No- DB-279)

Chair dining (Drg No- FD/MAP-II/04)

Chair dining long back (Drg No- FD-357)

Chair WBB w/o arms (Drg No- FD-56, 225)

Chair easy (Drg No- FD-229)

Chair writing (Drg No- FD-250, 280)

Hat stand with mirror (Drg No- FD-362)

Locker bed side wooden (Drg No- FD-54(M))

Peg table (Drg No- FD-25M, 277)

Stool 2' height (Drg No- FD-2, FD-81M)

Stool dressing (Drg No- FD/MAP-II/07)

Side board (Drg No- FD-26, 241)

Sofa set 5 seater (Drg No- FD-281)

Sofa set 4 seater (Drg No- FD-281)

Table office clerk (Drg No- DB 4120)

Table office officer (Drg No- DB 4120)

Table dining for 6 persons (Drg No- FD-30, 239, 273)

Table dining for 8 persons (Drg No- FD-30, 239, 273)

Table writing (Drg No- FD-249, 275, 33)

Table centre (Drg No- FD-274)

Table dressing gents with mirror (Drg No- FD-238, FD/E6/MAP/16)

Table dressing ladies with mirror (Drg No- FD-378, 251, FD/MAP-II/07)

Teapoy (Drg No- FD-232, 278)

Table bed side (Drg No- FD-28, 248, 276)

Table 1520x860x760 (Drg No- FD-139, 289)

Table 900x600x760 with drawer (Drg No- FD-224, 284, 283)

Table 900x600x760 without drawer (Drg No- FD-223, 224, 283)

Table 900x900x760 without drawer (Drg No- FD-291)

Almira medium wooden (Drg No- FD-110)

Almirah MAP (Drg No FD -1030,350)

Almirah mess utensil medium wooden (Drg No- FD-39M)

Rack for any rifles

Bench work shop, type A, B, C, D, E, O (Drg No- FD/42/45/43)

Bin solid linen small (Drg No- FD-4073)

Bin solid linen small large (Drg No- FD-200, DB-4301)

Charpoy niwar with fmn set (Drg No- WDF-11)

Chair easy cushioned (Drg No- FD-94, 255)

Display board any size (Drg No- FD-99, 192)

Locker wooden (Drg No- FD-54, 222)

Mirror with shelf (Drg No- FD-52(M))

Mirror dressing gents (Drg No- FD/E6/MAP/16)

Desk stand lecture (Drg No- FD-125)

Rack wooden any size (Drg No- WDF/7523/43/38)

Rack to record stores 1800x600x1800M (Drg No- WDF/42/4)

Meat and milk safe (Drg No- WDF-9)

Sofa 3 seater with form cushion

Table conference wooden (Drg No- FD-1001)

Table centre 2 tier (Drg No- FD-274)

Table 8'x4' (Drg No- GE(P)SK/03/84)

Table 5'x2'-10' (Drg No- DB-3555)

Table 3'x2'(OR's) (Drg No- FD-223)

M/s Pal Builders

Pleiad Complex On