SPECIAL REPAIR OF ROADS FROM PASCHIM DWAR TO

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces area not exceeding 400 Sqm and exceeding 50mm deep but not exceeding 100mm deep complete all as specified and as directed.

Material and labour for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing cracked mud, sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt and applying evenly one priming tack coat with paving bituminous primer at 10 Kg per 10 Sqm of surface using paving bitumen complete all as specified and as directed.

Material and labour for not exceeding 75mm thick bituminous, macadam laid/ rolled and compacted to by using 8 to 10 tonne power road roller to required camber and gradient (consolidated thickness 75mm or less) using Hot mix plant & Mechanical paver with @ 4% (paving bitumen (VG-30) Grade) binder content by weight of total mix, rolled and compacted by using 8 to 10 tonne power road roller to required camber and gradient complete all as specified and as directed. Note:- Soft stones such as lime stones, sand stones, slate stone etc will not be allowed to be incorporated in the work.

Material and labour for preparing the black top bituminous surface by brushing with wire brushes for removing caked mud, sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt and applying evenly one priming tack coat with paving bituminous primer at 5 Kg per 10 Sq metre of surface using paving bitumen complete all as specified and as directed.

Material and labour for laying and consolidating bituminous premixed ashphaltic semi dense concrete, 30mm consolidated thickness with 5.5% binder content by weight of total mix by using paving bitumen (VG-30 Grade) any penetration rolled and compacted to required camber and gradient with mechanical paver and rolled with 8 to 12 Tonne power roller complete all as specified and as directed.

Material and labour for preparing bituminous surfaces of road and marking 1.5-2mm thick centre lines, stop lines, dashes, arrows and the like not exceeding 10 cm wide on roads pavement with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturer's instruction complete all as specified and as directed.

Supply and fixing in repair Solar Delinators of 1000 x 47mm made of polycarbonate and toughened aluminium body height 145mm, diameter 80mm comprises of 4 super LEDs which give 360 degree viewing, solar panel-2.5V 120mm (approx) 1.25V rechargeable battery - 1 No and mounted on MS Pipe of 50mm duly powder coated, anti theft steel net of size 700mm x 50mm x 100mm including removal of existing complete all as specified and as directed by Engr-in-Charge. Note:- Excavation for bed block of size 150 x 150 x 200mm filling with concrete 1:3:6 and clearing of the area shall be included in the rate quoted.

Supply and fixing in repairs of cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of Model No DA 972.0 fixed with and including mild steel stud of suitable size as per manufacturers instructions including removal of existing complete all as specified and as directed.

Material and labour for 75mm thick spread thickness moorum red bajri filling as in berm including rolling complete all as specified and as directed.

Supply and fixing in repair of speed breaker made of ABS material with two highly reflective reflectors moulded in PMMA material are welded with ABS plate through ultrasonic welding process and then fixed to on to the speed breaker of size 750mm x 75mm x 250mm including surface to be make level as parential surfaces including dismantling/ taking out of any type rusted/ broken speed breaker complete all as specified and as directed by Engr-in-Charge.

Supply and fixing of solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4 V/ 0.3 Watt one NI-ed rechargeable battery (1.2 V/ 1600 MA) consisting of six super bright LED with 10,000 to 18,000 mcd completed as per manufacturers instructions including taking out old cat eyes and removal from site complete all as specified and as directed.

Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and as directed.

Material and labour for preparation of new concrete surfaces of any description over 10 cm girth or width and applying two coats of synthetic enameled paint over one coat of primer complete all as specified and as directed

Material and labour for preparation of old painted concrete surfaces of any description over 10 cm girth or width and applying one coats of synthetic enamel paint complete all as specified and as directed

KALIKAY ENTERPRISES (BID ID -3188668)

Nirmal Construction (BID ID -3182165)

Mepani Construction Company (BID ID -3182410)

Sukhi Electricals (BID ID -3181741)