MLA SDF 24 25 Sri.KB Ganeshkumar MLA Pathanapuram LAC Construction of new building for Library at Panambatta in Pathanapuram LAC General Civil Work

Work Name:MLA-SDF-MLA-SDF - 24-25-Construction of new building for Library at Panambatta in Pathanapuram LAC-MLA SDF 2024-25 Sri.KB Ganeshkumar MLA Pathanapuram LAC-Construction of new building for Library at Panambatta in Pathanapuram LAC-General Civil Work

ons having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mmy9.118.1:Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter).gOD120752/2025-2026:Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note:Cement Content considered in this item is @330kg/cum . Excess cement content as per mix design is not payable & less usage of coment is recoverable .All work above plinth level‘5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform‘5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantileversÑ5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more
9.53:Providing 40x

椠潲潨摬映獡⁴〴挠潬杮椠据畬楤杮映硩湩⁧潴映慲敭眠瑩⁨〱洠楤浡瑥牥戠汯獴‬畮獴愠摮眠潯敤汰杵⁳湡⁤浥敢摤湩獧椠散敭瑮挠湯牣瑥⁥汢捯〳ㅸ砰㔱挠㨱㨳‶業⁸ ‱散敭瑮㨠㌠挠慯獲⁥慳摮㨠㘠朠慲敤⁤瑳湯⁥条牧来瑡⁥〲洠潮業慮楳敺Щ慥档9伀㥄㌶㘵㈯㈰ⴵ〲㘲猺灵汰楹杮愠摮映硩湩⁧〲洰瑳敥污牤灯渀�⸹㜹㌮债潲楶楤杮愠摮映硩湩⁧污浵湩畩潴敷⁲潢瑬ⱳ䤠䥓洠牡敫Ɽ愠潮楤敳⡤湡摯捩挠慯楴杮渠瑯氠獥⁳桴湡朠慲敤䄠⁃〱愠⁳数⁲›㠱㠶Ⱙ琠慲獮慰敲瑮漠⁲祤摥琠敲畱物摥挠汯畯⁲牯猠慨敤‬楷桴渠捥獥慳祲猠牣睥⁳潣灭敬整㈺〰ㅸ‰浭Z㤀㠮⸱㨱牐癯摩湩⁧湡⁤楦楸杮戠楲桧⁴楦楮桳摥戠慲獳栠湡汤獥眠瑩⁨捳敲獷攠捴‮潣灭敬整ㄺ㔲洠〱ㄮ㨷牐癯摩湩⁧湡⁤楦楸杮䴠匮‮慦汣浡⁰祴数䤠漠⁲䥉漠⁦㘱洠楤⁡⹍⹓戠牡‬敢瑮琠桳灡⁥楷桴栠潯敫⁤湥獤椠⹒⹃⹃猠慬獢漠⁲敢浡⁳畤楲杮氠祡湩Ⱨ椠据畬楤杮瀠楡瑮湩⁧桴⁥硥潰敳⁤潰瑲潩景氠潯Ɒ愠汬愠⁳数⁲瑳湡慤摲搠獥杩潣灭敬整霮
ㄱ㐮⸱㨲牐癯摩湩⁧湡⁤慬楹杮瘠瑩楲楦摥映潬牯琠汩獥椠楤晦牥湥⁴楳敺⁳琨楨正敮獳琠敢猠数楣楦摥戠⁹桴⁥慭畮慦瑣牵牥 楷桴眠瑡牥愠獢牯瑰潩敬獳琠慨⸰㠰‥湡⁤潣普牯業杮琠卉㨠ㄠ㘵㈲‬景愠灰潲敶⁤慭敫‬湩愠汬挠汯畯獲愠摮猠慨敤ⱳ氠楡⁤湯㈠‰浭琠楨正挠浥湥⁴潭瑲牡ㄠ㐺ㄨ挠浥湥⁴›‴潣牡敳猠湡⥤‬湩汣摵湩⁧牧畯楴杮琠敨樠楯瑮⁳楷桴眠楨整挠浥湥⁴湡⁤慭捴楨杮瀠杩敭瑮⁳瑥⹣‬潣灭敬整匮穩⁥景吠汩⁥〶‰⁸〶‰浭䀮㌱ㄮㄮㄺ′浭挠浥湥⁴汰獡整⁲景洠硩ㄺ㐺⠠ㄠ挠浥湥⁴›‴楦敮猠湡⥤@㄀⸳㘱ㄮ㘺洠散敭瑮瀠慬瑳牥漠⁦業㩸㨱″ ‱散敭瑮㨠㌠映湩⁥慳摮眩㌱㤮ㄮ䌺浥湥⁴汰獡整⁲㨱″ ‱散敭瑮㨠㌠挠慯獲⁥慳摮 楦楮桳摥眠瑩⁨⁡汦慯楴杮挠慯⁴景渠慥⁴散敭瑮ㄮ′浭挠浥湥⁴汰獡整Ͳ
㌱㐮⸸㨱楆楮桳湩⁧楷桴䐠汥硵⁥畍瑬⁩畳晲捡⁥慰湩⁴祳瑳浥映牯椠瑮牥潩獲愠摮攠瑸牥潩獲甠楳杮瀠楲敭⁲獡瀠牥洠湡晵捡畴敲獲猠数楣楦慣楴湯㩳睔牯洠牯⁥潣瑡⁳灡汰敩⁤湯眠污獬䀠ㄠ㈮‵瑬⽲〱猠浱漠敶⁲湡⁤湩汣摵湩⁧湯⁥潣瑡漠⁦灳捥慩牰浩牥愠灰楬摥䀠〠㜮‵瑬⁲ㄯ‰煳佭
㌱㐮⸸㨲楆楮桳湩⁧楷桴䐠汥硵⁥畍瑬⁩畳晲捡⁥慰湩⁴祳瑳浥映牯椠瑮牥潩獲愠摮攠瑸牥潩獲甠楳杮瀠楲敭⁲獡瀠牥洠湡晵捡畴敲獲猠数楣楦慣楴湯㩳慐湩楴杮眠潯⁤潷歲眠瑩⁨敄畬數䴠汵楴匠牵慦散倠楡瑮漠⁦敲畱物摥猠慨敤‮睔牯洠牯⁥潣瑡愠灰楬摥䀠〠㤮‰瑬⽲〱猠浱漠敶⁲湡甠摮牥挠慯⁴景瀠楲敭⁲灡汰敩⁤⁀⸰㔷氠牴ㄯ‰煳景愠灰潲敶⁤牢湡⁤湡⁤慭畮慦瑣牵艥㌱㘮⸱㨱慐湩楴杮眠瑩⁨祳瑮敨楴⁣湥浡汥瀠楡瑮漠⁦灡牰癯摥戠慲摮愠摮洠湡晵捡畴敲琠楧敶愠癥湥猠慨敤吺潷漠⁲潭敲挠慯獴漠敮⁷潷歲G㄀⸳ㄷ䰺瑥整楲杮眠瑩⁨汢捡慊慰楰瑮漠⁦灡牰癯摥戠慲摮愠摮洠湡晵捡畴敲瀀牥䰠瑥整⁲数⁲浣栠楥桧䑏㘹㔳⼸〲㔲㈭㈰㨶牐癯摩湩⁧散敭瑮洠畯摬摥氠瑥整獲漠⁦楳敺㈠洵敨杩瑨琠桴⁥慮敭戠慯摲漠桴⁥畯⁴楳敤漠⁦畢汩楤杮椠据畬楤杮愠汬挠獯ⱴ猠慣潦摬湩⁧档牡敧ⱳ†潣癮祥湡散‬湡⁤慬潢牵挠慨杲獥攠捴挠浯汰瑥⁥獡数⁲桴⁥楤敲瑣潩景攠杮湩敥⁲湩挠慨杲⹥ĸ伀㥄㌶㤵㈯㈰ⴵ〲㘲债潲楶楤杮愠摮猠灵汰楹杮椠慮杵牵瑡潩瑳湯⁥景琠汥ⵥ汢捡楳敺⠠ㄠㄮ砰⸰〹洠⤠楷桴戠慬正㈠洰桴捩牧湡瑩⁥瑳湯⁥湥牧癡湩⁧敬瑴牥愠⁳灳捥晩敩⁤湡⁤畲湮湩⁧潢摲牥映畯⁲楳敤⁳湩猠潴敮椠据畬楤杮朠汯敤潣潬⁲畦湲獩楨杮眠瑩⁨污潣瑳漠⁦慭整楲污⁳湡⁤慬潢牵挠慨杲獥‬潣癮祥湡散挠慨杲獥攠捴挠浯汰瑥鱥䑏㘹㔳⼷〲㔲㈭㈰㨶楈桧䤠瑮湥楳祴倠楲浳瑡捩琠灹ⵥ噉朠慲敤猠敨瑥湩⁧湩汣摵湩⁧敬瑴牥☠浡㭰猠浹潢獬猠敨汬戠⁥畯⁴景挠浯異整楲敺⁤畣瑴湩⁧慭档湩⁥瑥⹣挠浯汰瑥⹥˜伀㥄㌶ㄶ㈯㈰ⴵ〲㘲债潲楶楤杮‬畳灰祬湩⁧湡⁤楦楸杮㐠浭䄠偃猠敨瑥琠污浵湩畩牦浡⁥湩汣摵湩⁧捳敲獷‬慬潢牵攠捴‮䄨畬業楮浵映慲敭琠敢瀠楡⁤敳慰慲整祬踩
㘱㘮㨸牐癯摩湩⁧湡⁤慬楹杮㘠‰浭琠楨正映捡潴祲洠摡⁥散敭瑮挠湯牣瑥⁥湩整汲捯楫杮瀠癡牥戠潬正漠⁦⁍‭〳朠慲敤洠摡⁥祢戠潬正洠歡湩⁧慭档湩⁥楷桴猠牴湯⁧楶牢瑡牯⁹潣灭捡楴湯‬景愠灰潲敶⁤楳敺‬敤楳湧☠猠慨数‬慬摩椠敲畱物摥挠汯畯⁲湡⁤慰瑴牥癯牥愠摮椠据畬楤杮㔠‰浭琠楨正挠浯慰瑣摥戠摥漠⁦潣牡敳猠湡Ɽ映汩楬杮琠敨樠楯瑮⁳楷桴映湩⁥慳摮攠捴‮污潣灭敬整愠⁳数⁲桴⁥楤敲瑣潩景䔠杮湩敥⵲湩挭慨杲⹥Ħ㘀㈮⸶㨲牂捩潷歲眠瑩⁨潣浭湯戠牵瑮挠慬⁹敳敬瑣摥䘠倮匮⠠潮潭畤慬⁲ 牢捩獫漠⁦汣獡⁳敤楳湧瑡潩⸷‵湩攠灸獯摥戠楲正眠牯湩汣摵湩⁧慭楫杮栠牯穩湯慴湡⁤敶瑲捩污朠潲癯獥ㄠ‰浭眠摩⁥㈱洠敤灥挠浯汰瑥⁥湩挠浥湥⁴潭瑲牡ㄠ㘺⠠ㄠ挠浥湥⁴›‶潣牡敳猠湡⥤扁癯⁥汰湩桴氠癥汥愠摮甠瑰汦潯⁲⁖敬敶奬
䑏㈱㤲㌵㈯㈰ⴵ〲㘲区灵汰楹杮愠摮映硩湩⁧楈桧䐠湥楳祴䠠杩⁨潍獩畴敲删獥獩慴据⁥䠨䡄前 㠱浭琠楨正瀠敲慬業慮整⁤楦牢⁥潢牡⁤潤扵敬猠摩摥‬″慬敹⁲牰獥楳杮攠瑸牥潩⁲牧摡⁥桳敥⁴慰敮汬湩⁧潦⁲景楦散挠扵捩敬挠灵潢牡⁤瑥⹣戠捡楫杮漠⁲瑳摵楤杮眠瑩⁨捳敲獷映湩獩楨杮愠摮瀠楡瑮湩⁧湡⁤湩汣摵湩⁧污慭整楲污ⱳ挠湯敶慹据⁥湡⁤慬潢牵挠慨杲獥攠捴‮潣灭敬整樮ㄲㄮㄮ㈮债潲楶楤杮愠摮映硩湩⁧污浵湩畩潷歲映牯搠潯獲‬楷摮睯ⱳ瘠湥楴慬潴獲愠摮瀠牡楴楴湯⁳楷桴攠瑸畲敤⁤畢汩⁴灵猠慴摮牡⁤畴畢慬⁲敳瑣潩獮 灡牰灯楲瑡⁥⁚敳瑣潩獮愠摮漠桴牥猠捥楴湯⁳景愠灰潲敶⁤慭敫挠湯潦浲湩⁧潴䤠⁓›㌷″湡⁤卉›㈱㔸‬楦楸杮眠瑩⁨慤桳映獡整敮獲漠⁦敲畱物摥搠慩愠摮猠穩ⱥ椠据畬楤杮渠捥獥慳祲映汩楬杮甠⁰桴⁥慧獰愠⁴番据楴湯ⱳ椠攮‮瑡琠灯‬潢瑴浯愠摮猠摩獥眠瑩⁨敲畱物摥䔠䑐⁍畲扢牥 敮灯敲敮朠獡敫⁴瑥⹣䄠畬業楮浵猠捥楴湯⁳桳污敢猠潭瑯ⱨ爠獵⁴牦敥‬瑳慲杩瑨‬業牴摥愠摮樠楯瑮摥洠捥慨楮慣汬⁹桷牥癥牥爠煥極敲⁤湩汣摵湩⁧汣慥⁴湡汧ⱥ䄠畬業湮畩湳灡戠慥楤杮映牯朠慬楺杮⼠慰敮楬杮‬⹃⹐戠慲獳 瑳楡汮獥⁳瑳敥捳敲獷‬污潣灭敬整愠⁳数⁲牡档瑩捥畴慲牤睡湩獧愠摮琠敨搠物捥楴湯⁳景䔠杮湩敥⵲湩挭慨杲⹥䜨慬楺杮‬慰敮楬杮愠摮搠獡⁨慦瑳湥牥⁳潴戠⁥慰摩映牯猠灥牡瑡汥⥹਺潆⁲楦數⁤潰瑲潩偮睯敤⁲潣瑡摥愠畬業楮浵⠠業楮畭桴捩湫獥⁳景瀠睯敤⁲

coating 50 micron)Å21.16.2:Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-Charge.Powder coated minimum thickness 50 micron aluminium´
21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sideso
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)-Appendix: B - Water supply and Sanitary works´
17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lidL
OD207684/2025-2026:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. steel pillar taps, 32 mm C.P. steel waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. steel pillar tap 17.28.2.1:Flexible pipe32 mm dia
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.LitreªOD207689/2025-2026:Providing and fixing C.P. steel long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore™50.18.9.22.8:Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowlŒOD96354/2025-2026:providing and fixing PVC floor trap multy way connection of approved quality including all fittings charges etc, complete.¥50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.¹50.17.1.2:Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.ª50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.4
50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall4
50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wallÕ50.18.9.3.2:Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2×50.18.9.4.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2Ì50.18.9.7.1:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2Ö50.18.9.9.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2*
50.18.9.19.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall•50.18.9.20.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow”50.18.9.20.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend™50.18.9.20.7:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia vent cowl–50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow¡50.18.9.22.2:Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing wit