SPECIAL REPAIRES TO VARIOUS TEMPARARY SHELTER AT SIYOT AND PROVN OF CHAINLINK FENCING AND CONCENTRA COIL AT BHUJ UNDER GE(A) BHUJ

Amount

Dismantling of wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

Supply & fix rolled mild steel in joist, angle ,channel as in purlins, rafters cleats etc conforming to Fe-410- W (Gde-E-250)quality A, all as directed.

S&F mild steel rolled section as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 290 GdeE-165 complete all as specified

Dismantling asbestos cement/PPGL Sheet (corrugated/semi corrugate/Plain, etc.,) sheets in roof covering including wooden batten, wooden trusses, complete all as specified

S&F camouflage pattern prepainted camofaluge pattern galvaluam aluminium zinc coating GI base corrugated steel sheet 0.50mm thick of colour as directed by GE having tensile strength of 550MPa as in roof covring/cladding to wall, with necessary rubber/PVC end cappings/closure at support fixed with self tapping screws complete all as spd and directed (Note: Corrugation shape and colour of sheet shall be approved by GE)

S&F camouflage pattern prepainted galvaluam aluminium zinc coating GI base plain sheeting steel sheet 0.50mm thick of colour as directed by GE for ridge having tensile strength of 550MPa as as in roof covring/clading to wall, with necessary rubber/PVC end cappings/closure at support fixed with self tapping screws fixed with self tapping screws complete all as spd and directed (Note: Corrugation shape and colour of sheet shall be approved by GE)

S & F for hand rails, half round or other stock section, drilled to wind ties for roof including securing bolts etc, including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

S & F in repair anodised Aluminium alloy sections sliding windows with frames Series-C (20mm) section size 92x26.5x1.2 mm for frame and shtter section shall not be less than .55 kg per RM and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, shutters with tinted glass 5mm thick and stainless steel wire cloth 0.35mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed.

S&F in repair Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zince coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off whitee/white in colour complete with material, fixing, jointing etc., with Coloured textured designer ceiling board (Everest) 4mm thick of size 595 x 595 mm fixing with screws/clips complete all as per manufacturers instructions and direction.

Excavating in post holes in soft/loose soil each not exc. 0.50 cum getting out.

M/L PCC 1:4:8 type D2 using 40mm graded trap stone aggregate as in foundation.

S & F of Framed works for chain links angles, frame work for watertanks including etc conforming to Fe-290.Gde-E-165.

M/L TMT bars 10mm dia and over cut to length, bent to shape including cranking, binding spirally for hooping for columns hooking ends and binding with end including mild steel wire (annealed) not less than 0.9mm dia.

Removing excavated material n.exc.50m and depositing where directed at a level n.exc 1.5m above the starting point.

Supply only chain link mild steel galvanized fencing of any size and type.

Fixing only chain link fencing including line wire, any mesh size and type to any type of standard rails, straining bolt etc.

Supply only mild steel flat iron of Fe-410-0 or Fe-310-0 in required length for fixing/supporting to chain link fencing and post.

S/F mild steel (5 to 10mm dia of neck) screw bolt (machine made) exc 5cm but not exc 10 cm in length with hexagonal or square head at one end and screwed the other each screw end to be fitted with washer 3 mm thick mild steel.

S&F of Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

S&F of Concertina Razor wire coil of 450 mm dia and fixed to MS Angles all as directed by Engr-In-Charge.

M&L Preparation of new steel Surfaces of anydescription n exc10cm width or girthwhen unconnected with other painting or when painted indifferent tint

M&L Preparation of new steel surface exc 10 cm width and girth and applying two coat of synthetic enamel paints over a coat of red oxide primer.

M/s Bombay Novelty Stores

Khodiyar Construction

suvidhiconstruction

KALIKAY ENTERPRISES