Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹11.7 L
EMD Value
₹23,309
Closing Date
9 Jan 2026, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER RNB ELECTRIC DIVISION KASHMIR
RNB ELECTRIC DIVISION KASHMIR ENGINEERING COMPLEX
Construction of Science Laboratory Block at HSS (Chandoosa Baramulla) B.W.O Electric Work
2025_PWDJK_299086_1
NIT No.238/2025-26 Dt/24/12/2025
Open Tender
Electrical Works
Percentage
Chandoosa Baramulla
Please refer Tender documents.
4 documents required · 4 mandatory
₹600
EXECUTIVE ENGINEER RNB ELECTRIC DIVISION KASHMIR
₹23,309
24 Dec 2025
24 Dec 2025
10 Jan 2026
24 Dec 2025
9 Jan 2026
24 Dec 2025
Wiring for light point / exhaust /ceilingfan point with (P+N) 2X1.5 sq.mm FRLS-H ( Polycab/ Havells/ Finolex/ eqt make as approved by site engineer),PVC insulated copper conductor single core cable in surface / recessed Conduits (Anchor/polycab/Ravindra/equivalent make as approved by site engineer) , with 6Amp .modular switch (Anchor roma urban/legrand/SSK NV/ABB/equivalent make as approved by site engineer), modular plate, cover in front and suitable GI box (Excld. G.I Box laid earlier )etc of approved quality and make ISO/IEC Certified (quality of wire shall be approved before execution of wok by SITE In-charge Engineer strictly as required) job including cost of Circuit Wire in 2.5Sqmm Multi strand Copper wire from Switch board to D.B complete. excluding cost of Conduits ( Separate wiring for inverter points)
Supply and fixing of 6 amp/250 V A.C fan dimmer step type 2 module with cover plate Anchor Roma plus/SSK NV/ Legrand Mylinc /ABB / eq. make to be approved by EIC
Wiring for Power Plug with (P+N+E) 3 x 4 sq.mm FRLS-H ( Polycab/Havells/Finolex/eqt make as approved by site engineer)PVCInsulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit (Anchor/polycab/Ravindra/equivalent make as approved by site engineer) along with 1 x 4 sq.mm FRLS PVC Insulated copper conductor single core cable for loop Earthing of approved quality and ISI marked as required. With . 1NO. 16Amp .Modular switch(Anchor roma urban/legrand/SSK NV/equivalent make as approved by site engineer), Modular 1NO.3-PIN . 16 Amp. Socket , Modular plate, cover and suitable GI box (Excld. G.I Box laid earlier )etc as required .
Wiring for 6Amp Plug with(P+N+E) 3 x 2.5 sq.mm FRLS PVC ,Polycab/Havells/Finolex/eqt make as approved by site engineer) Insulated Multi strand Copper Conductor single core cable in surface/Recessed Conduit along with 1 x 2.5 sq.mm FRLS, Polycab /Havells/ Finolex/ eqt make as approved by site engineer) PVC Insulated copper conductor single core cable for loop Earthing of approved quality and ISI marked as required. with ,2No.6Amp .Modular switch(Anchor roma urban/legrand/SSK NV/ABB/equivalent make as approved by site engineer), 2, 2NO. Modular 6 Amp. 5-PIN Socket ,6-8 Module Modular gride plate, cover and suitable GI box etc (Excld. G.I Box laid earlier )as required (wire shall be approved before execution of wok by SITE In-charge Engineer strictly , connections etc. as required.) complete excluding cost of Conduits
Wiring for Sub main Wiring along with earth Wire with the following Sizes of FRLS PVC insulated copper conductor, single core Cable in surface/ Recessed medium class PVC conduit as required. (wire shall be approved before execution of wok by SITE In-charge Engineer strictly .
2X 10sq. MM+ 1 X 10 sq. MM (Phase +N+E) Power point Sub main in One runFrom Main Panel to .Distribution boards(Polycab/Havells/Finolex/eqt make )
2 X 6SQ.MM + 1 X 6. SQ.MM [Phase +N+E) For Lighting and Inverter Sub main in one run from Main Panel to Distribution board(Polycab/Havells/Finolex/eqt make)
SINGLE POLE (6-32Amp) Legrand /Havells or L&T /Schneider/ABB/ eq. make to be approved by EIC
Supplying and fixing following rating, Double pole, (P +N) 240 V, C* Curve Residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as reqd.
32 Amp. Legrand /Havells or L&T /Schneider/ABB/Siemens/ eq. make to be approved by EIC ( For inverter circuit)
40Amp. Legrand /Havells or L&T /Schneider/ABB/Siemens/ eq. make to be approved by EIC
63Amp. Legrand /Havells or L&T /Schneider/ABB/ Siemens/ eq. make to be approved by EIC
Supplying and fixing following way, Triple pole and neutral, sheet steel, MCB distribution board,( Havell/ legrand/ Shinider/SSK / eq. make to be approved by EIC) 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)
6 way (4 + 18), Double door
ENVIRONMENTALLY SAFE MAINTENANCE FREE COPPER Rod EARTHING SYSTEM Necessary soil treatment is to be made by the contractor in order to improve the Pit resistance Value .Supplying, Installation and Testing of 75 mm copper Pipe Filled with Crystalline conductive Mixture with Eco friendly GEM Backfill Compound 2No. Bags also having Earth pit chamber (300mm x 300mm) with man- hole cover for the above. Including cost of 2OMM Wide copper strip as required in one run fitted with of brass nut bolt & spring washer from EARTHING ROD up to MAIN Control PANEL through DWC High Density Poly ethylene Pipe having Corrugation complete job
Supply installation testing and commissioning of 18 W + LED Surface Mounted Panel light luminary fitting round shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India authorised lab . The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips or Havel's or Wipro or Halonix/ eq. make to be approved by EIC
Supply, Installation, Testing and Commissioning of 1200 mm sweep, ceiling fan with 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, Power Factor not less than 0.9, Service Value including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase Supply, etc. complete as required. USHA/Havells/Polycab/ LUKER USA/ eq. make to be approved by EIC
Supply,Installation,Testing and Commissioning 320 Cu.m/Hr. AC 220-240 Volts, 50 Hz Exhaust fan made out of ABS Plastic Material with inbuilt thermo cut-off Protection and Noise Level not exceeding 37 dB of Following Sizes including connection etc. Compt 225-250mm Shutter Typed
Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement) 3 No.
Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required.
Normal INCOMING:
a)250A 4P MCCB 50 KA including spreader links,( Adjustable thermal and magnetic release) Legrand/ Shinider/ABB/eq. make sample to be approved before installation..
b) 4 No. of Aluminium Bus Bar of 400 Amp.
c)Digital meters and phase indicators -1 set.
d) onload Change over switch 160 Amp for generator.Front operated.
e) 4 No. of Aluminium Bus Bar of 250 Amp.
c)Digital meters and phase indicators -1 set.
Inverter /UPS Incommer
(a) 100 amp DP MCB
(b) 200 Amp 2 strip bus bar
c)Digital meters and phase indicators -1 set.
c) space for 12 way MCB's
OUTGOING:
b)100 amp DP MCB 10 K Legrand/ Shinider/ABB/L&T/ eq. make to be approved by EIC sample to be approved before installation..
c) space for 32 way MCB's ( future provision)
c)Digital meters and phase indicators -1 set.
S/L , testing and commissioning of PVC alluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size.
d) 95 sq.mm 3.5 core ( armoured)
Earth work excavation for cable trench, 2 ft deep with an average breadth of 1.5ft and refilling of trench with excavated earth after laying of cable and ramming it properly excluding cost of cable.the job also includes laying of warning tape .
Supply, Laying, testing and commissioning of 25 mm dia. High class PVC conduit Heavy Duty, Unbreakable conduits to be laid in RCC Slab and downs in walls including cutting the wall and making good the same with 1:6 mix cement plaster in case of recessed conduit as required etc including cost of accessories like bends and ‘heavy Gauge Sheet Steel Deep Junction boxes of approved make .(Before laying of conduit the same to be approved by site Engineer) . Preferred make: Ravindera /Anchor/Alba/Polycab / eq. make to be approved by EIC.
Supply, Laying, testing and commissioning of 32mm dia. High class PVC conduit Heavy Duty, Unbreakable conduits to be laid in RCC Slab and downs in walls including cutting the wall and making good the same with 1:6 mix cement plaster in case of recessed conduit as required etc including cost of accessories like bends and ‘heavy Gauge Sheet Steel Deep Junction boxes of approved make .(Before laying of conduit the same to be approved by site Engineer) . Preferred make: Ravindera /Anchor/Alba/Polycab / eq. make to be approved by EIC.
Supply, installation, testing& Commissioning of Bulk Head Fittings of Havel's RUGBY Model HAVEL'S BULK HEAD Fittings with 12watt LED Bulb of Philips or Havel’s /wipro/Halonix/eq. make sample to be approved before installation
Supply, Installation, Testing & Commissioning of 5 KVA + ( Plus) 1-Phase IN 1-Phase out ON Line UPS System With In-Built Isolation Transformer of reputed make dully ISI Marked (Make to be approved before installation) (Compitable to Genrator Supply having varing frequency) With on line double conversion topology, high frequency techonology, with front LCD,automatic bypass for fault tolerance & complete with 16 Number, 12 Volts 65 AH SMF VRLA Batteries( Exide make) with connecting links with angle iron battery stand complete job, complete with battery rack with two year warranty against any manufacturing defect. The job further includes AMC for UPS and batteries for a period of one year with replacement warrenty reckoned from date of sucessfull commissioning. Microtec/ Eaton / eq. make to be approved by EIC
Supply ,installation ,testing , &commissioning of 10KVA 1 -Phase SERVO controlled VOLTAGE Stabilizer of Approved brand with following SPECIFICATIONS : (1). INPUT VOLTAGE: 156 Volt -450 Volts P-P (90V-260V N-P) (2). OUT PUT VOLTAGE : 400Volts+ 1%(230VAC) (3).Winding Material Insulation : 99.97% PURE COPPER WOUND FIBER GLASS (4). IN DOOR TYPE (5). COOLING :OIL 1S 335 (6).MICRO CONTROLLED TRUE RMS Based LCD display (7). Protections are Over Load COPPER wound of Cosco/Electric Field /Alba /AE / / eq. make to be approved by EIC ISI/1SO certified for smooth functioning/ constant voltage supply having Technical Specifications : Input voltage= 90-260 volts & output voltage=220 volts+ - 2% Buck Boost Transformer Copper wound 99.9% ,OIL Immersed COOLING OIL ,High cut/Low Cut /Time delay / Over Cut through Micro Control and Spike Protection including ,Carriages ,installation charges , testing & taxes complete job alongwith servo bypass switch of adequate rating.
Supplying, Installation, Testing and Commissioning of ABC type Fire Extinguisher 4.Kg. Capacity ISI Mark(IS:15683) and dully certified
Providing and Laying of shock proof rubber mats of 2mm*1mm*12mm thick insize of standard make
Supplying, Installation, Testing and Commissioning of CO2 Type Fire Extinguisher 4.5 Kg. Capacity ISI Mark(IS:15683)suitable for 'B' and 'C' class fires - inflammable liquids, gaseous fires like L.P.G. and acetylene, and electrical fires
Supply and fixing modular blanking plates on existing modular switch plates, excluding cost of plates.
Supply/Fixing of water Dispenser with refrigerator Hot and Cold Taps of capacity 10 litres Acrylonitrile Butadiene styrene (ABS) of Blue/Voltas/Honeywell/ eq. make and shall be approved before supplying ( 3star)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.04 MB
BOQ_969923.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .