Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.8 Craccepted-aoc | ₹1.8 Cr | accepted-aoc |
Tender Value
₹2.1 Cr
EMD Value
₹3.7 L
Closing Date
20 May 2026, 5:30 pmClosed
Directorate of Municipal Administration
Ramesh kamatagi
Operation and Maintenance of street lights in ward no 1 to 35 in Raichur City.
DMA/2026-27/SE7840
DMA/2026-27/SE7840
Open
Two Tender Document System(Two Cover)
DMA City Corporation Raichur
5 documents required · 5 mandatory
satisfactory completed as prime contractor (50% of the cost of the work), at least one similar work such as Streetlight Electrical Maintenance Rs 124.00 Lakhs
The contractor shall registered with KPWD electrical contractor, OR firm/company with valid electrical license issued by competent authority.
achieved in at least two financial years an average annual financial turnover of Rs. 248.00 Lakhs (usually not less than the estimated cost under this contract)
Liquid assets and or availability of credit facilities of not less than Rs. 74.40 Lakhs Credit lines letter of credit/ certificates from banks for meeting the fund requirement .
The contractor shall registered with GST Registration.
₹5,000
₹3.7 L
17 Sept 2026
6 May 2026
22 May 2026
19 May 2026
13 May 2026
Operation and Maintenace of light sources mentioned below and cost of men and material as directed by the Engineer in charge. , to be attended by tthe contractor at his cost only. 4 Feet, 36W flurescent lamp fixtures consisting of 4 long, 36 W tube light as 40 watts FTL fixture for street lights.
Operation and Maintenace of light sources mentioned below and cost of men and material as directed by the Engineer in charge.to be attended by the 2 contractor at his cost only. The control gear housing improvement capacitor and ignitor (for HPSV lamp) all prewired up to the terminal block. The luminary is painted white inside and hammer tone gray outside. 250 watts SVL Fixture for street lights
Operation and maintenance of 150 Watt LED Flood Light with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Diffuser with Injection moulded & is made of polycarbonate material with high transmission index, delivering superior light output Rated Life Burning Hrs
Operation and Maintenace of light sources mentioned below and cost of men and material as directed by the Engineer in charge.Metal Halide (MH) Lamp fixtures consist of metal halide lamp MH lamps made from low loss silicon steel lamination and are wound with polyester based super enamelled copper wire with class F insulation on specially designed glass filled nylon bobbin and Ignitors suitable for MH lamps confirming to IS 9974. 400W MHL Fixture For street lights
Operation and maintenance of 50 Watt LED Streetlight with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Power Factor 0.9 with mains current should not be greater than 0.1A to 0.7A & Surge Protection-Min 4 KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm.Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application.
Operation and maintenance of 100 Watt LED Streetlight with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Power Factor 0.9 with mains current should not be greater than 0.1A to 0.7A & Surge Protection-Min 4 KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm.Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application.
Operation and maintenance of 150 Watt LED Streetlight with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Power Factor 0.9 with mains current should not be greater than 0.1A to 0.7A & Surge Protection-Min 4 KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm.Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
CCR STREET LIGHT.doc
Tender Document • 0.69 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .