Providing underground drainage line from IV Palace in Prakasam road to Andhra Hospital in Prakasam road Suryaraopeta areas 23rd Division AE5 Section in Circle-II Area

Cutting of CC road surface including stacking of excavated materials for lying of pipelines as per the directions of the departmental authorities.

Earthwork excavation and depositing on bank with an initial lead of 50mts and lift of 3mts in loamy and clayey soils like black cotton soils, red earth and ordinary gravel as per SS 20-B. For pipeline trench including shoring and strutting.

Supply and delivery of quarry dust from approved quarry including cost and conveyance of all materials and labour charges for stacking at site to departmental guage, spreading, sectioning, seignorage, watering etc., complete as per specification.

Conveyance of excavated earth with an average lead of 5Km including loading, unloading, spreading and stocking etc., complete.

Bailing out of water with oil engine, driven pump set including hire charges, fuel charges and wages of driver and helper etc., complete as per the directions of the departmental authorities.

Manufacture, supply and delivery of (DWC) structured wall polyethylene / polypropylene piping system with non-smooth external annular corrugated and smooth internal surface (Double wall) for non-pressure sewage & drainage application pipes of standard length 6m, grade conforming to IS 16098 (Part-II:2013) including transportation to anywhere in A.P., excluding all taxes. For 200mm dia (SN8)

Laying of SN8 structured wall (External Annular Corrugated & Smooth Internal Surface) Polyethelene pipes, on the lower bedding (Constructed at bottom of trenches) at prescribed gradient, depth & alignment including installation and jointing of the same with the help of coupler (online / Offline) attached to one end of the pipe & sliding the coupler end over the elastomeric sealing rubber ring fitted on the specified valley of the spigot end of next pipe, testing the water tightness of the joint assembly, ensuring the continuity tests of specified pipe segments etc., complete as per drawing, specifications & detail engineering including carriage of pipes & fittings from site stacks to the place of laying etc., as per direction of Engineer-in-Charge. (Payment to be made on the basis of actual finished length of pipeline). For 300mm dia

Manufacture, supply and delivery of fittings & accessories compatible with DWC pipe - non smooth External Annular Corrugated and smooth internal surfaces (Double wall) for non-pressure or similar type of class SN8 Structured wall polyethelene piping systems including transportation to anywhere in A.P., excluding GST and other Government duties. For 300mm dia Coupler

Manufacture, supply and delivery of fittings & accessories compatible with DWC pipe - non smooth External Annular Corrugated and smooth internal surfaces (Double wall) for non-pressure or similar type of class SN8 Structured wall polyethelene piping systems including transportation to anywhere in A.P., excluding GST and other Government duties. For 300mm dia Sealing ring

Supply, delivery, lowering and laying of SWG pipes in readymade trench true to alignment and gradient, jointing and testing of stoneware pipes including cost of jointing material such as cement mortar (1:1) proportion and hemp yarn including cost and conveyance of all materials etc., complete. For 100mm

Providing concrete for plain concrete (M20 Design mix) using 343 Kgs Cement 20mm, 10mm nominal size Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications of MORTH.

Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, unloading & stacking at site but excluding central excise duty, sales tax, octroi and other Govt levies etc., as applicable. I.S.I Mark Basic Rate as per SSR (H.D-35 with 560mm dia clear opening)

Manufacture, supply and delivery of HDPE pipes conforming to IS 4984-2016 including transportation to anywhere in A.P., excluding all taxes. (Supply up to 90mm dia in coil & above 90mm dia straight length)

Providing and fixing electro fusion ferrule tapping saddle manufactured from virgin resin of PE-80/PE-100 having blue/black colour using food grade compound raw material with quality assurance certificate from quality agencies like CIPET etc., complete. For usage in drinking water system and having working pressure of 10 bar. The cost shall include testing of all materials, labour, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking, providing and fixing etc., complete as specified and directed by the Departmental Engineers, but excluding of all taxes. (MAT-07591) (For 100mm dia 1/2" tapping)