PAINTING OF PIPELINE AND STRUTURALS OF H2, N2, PROPYLENE, BULLETS AREAS, LPG AREAS, BOILER, HOT OIL AND MRS AREAS

Amount

Surface preparation and painting of N2 Bullet and its piping using Polyurethane paint system. Surface preparation should be as SSPC-SP-2-63 excluding supply of paint. Paint System : One coat of Polyurethane Primer. Two coats of Polyurethane finish. DFT a. Primer - 1* (33 + 3) = 33+3 b. Finish - 2 *(33 + 3) = 66 +3 Total DFT of all three coats - 100 μ (min)

Painting the Hydrogen Bullets, pipes and structural steel pipe supports of Hydrogen Bullets,LPG & Prpylene Bullets pipe lines with two coats epoxy Finish Coat over two coats of Epoxy Zinc Phosphate Primer of required specification and colour after the surface preparation of the pipe supports using wire brushes, scrapers, and emery paper, as per the scope of work as per the instruction of the Engineer-in-Charge. Surface preparation and painting of pipelines, equipments, and structurals, using epoxy paint systems. Surface preparation should be as per SSPC-SP-2-63 Paint System : One coat of Zinc Phosphate Epoxy Primer. Two coats of Epoxy finish paint. DFT a. Primer - 1 (33 ± 3) μ b. Finish - 2 (33 ± 3) μ Total DFT of all three coats - 100 μ (min)

Supplyand application of Heat resistant Aluminum painting (3 coat) Surface preparation and painting of :Strutural in MRS yard etc. Surface preparation should be as per SSPC-SP-2-63 Paint System :One Coat of Ordinary Primer + Two Coats of Heat Resistant Aluminum Paint Confirm to IS 2339 . DFT =15/coat Total DFT - 45 μ (min)

Supply and application of Heat resistant Aluminum painting Surface preparation and painting of :Strutural in Boiler house,Hotoil Heater including stacks, Finish Coat (F - 11) - Heat Resistant Aluminium Paint THREE COAT suitable upto 250º C Composition Duel container (paste & medium). Composition Heat resistant special varnish medium combined with Aluminium flakes Volume solids 20 - 25% (min.) DFT 20 microns/coat (min) Covering capacity 10 - 12 M2/Lit/coat

Supply and application of Coaltar Epoxy painting Surface preparation and spray painting of gratings using Coaltar Epoxy Paint System : One coat of Epoxy Primer. One coat of Coaltar Epoxy finish. DFT a. Primer - 1 (33 ± 3) μ b. Finish - 1 (90) μ Total DFT of all two coats - 123 μ (min) Surface preparation and spray painting of gratings using Coaltar Epoxy. Surface preparation should be as per SSPC-SP-2-63

Supply and application of painting. Surface preparation and application (SPRAY PAINTING) of epoxy paint systems. Surface preparation should be as per SSPC-SP-2-63 Paint System : One coat of Zinc Phosphate Epoxy Primer. Two coats of Epoxy finish paint. by spraying on Transformers and allied equipments etc. DFT a. Primer - 1 (25 ± 5)μ b. Finish - 2 (25 ± 5) μ Total DFT of all three coats - 75 μ (min)

TECHNOCRATS

K.GOPAKUMAR

T HARIDASAN