Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.8 LAccepted-AOC 0 NEAR SATYANARAYAN SOCIETY GAYATRI MANDIR ROAD 0 BHUJ KUTCH GUJARAT 370001 | KACHCHH | GUJARAT | 370001 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹24.3 L+₹4.5 L (22.9%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN THE LOWEST BIDDER | |
| 3 | L3₹25.3 L+₹5.6 L (28.2%)Rejected-Finance WANIAWAD BHUJ KUTCH 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L3 | Rejected-Finance OTHER THAN THE LOWEST BIDDER |
Tender Value
₹24.3 L
EMD Value
₹48,540
Closing Date
26 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BHUJ
GE (AF) BHUJ ,KHAVDA ROAD, BHUJ GUJARAT-370001
ADDN/ALTN TO MAIN AND SUB GUARD ROOM AT AF STN BHUJ
2022_MES_537635_3
8611
Open Tender
Civil Works
Item Rate
180 days
GE (AF) BHUJ
AS PER NIT AND TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (AF) BHUJ
₹48,540
Yes
10 Nov 2022
8 Sept 2022
28 Sept 2022
8 Sept 2022
26 Sept 2022
14 Sept 2022
9 Sept 2022 - 9 Sept 2022
Amount
Demolition of stone slabs and tiles of any descritption or thickness in floors, aprons etc laid and bedded and pointed in any mortar. complete all as specified and as directed by Engineer-in-Charge.
Material & labour for andho stone of thickness 10 to 12 mm cladding gang saw cut with machine cut edges, uniform colour making V grooveat top and bottom of stone and drilling hole for hold fastener, polishing ,rubbing& including silicon treatment. complete all as specified and as directed by Engineer-in-Charge.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard soil/ hard rock Complete all as specified and directed by Engineer-In-Charge.
Material and labour for Plain Cement concrete, type D2, (1:4:8), (using 40mm graded stone aggregate) in foundation/lean and mass complete all as specified and as directed by Engineer-in-Charge.
Form work to sides of foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter to rough finished surfaces of concrete in flat complete all as specified and directed by Engineer-in-Charge.
Material and labour for RCC Reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beam, plinth beam bases for columns etc.complete all as specified and directed by Engineer-in-Charge.
Material & Labour for providing and fixing stainless steel (Grade 304) railing & SS balls made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. complete all as specified and directed by Engineer-in-Charge.
Demolition of brickwork built in cement mortar as in walls, etc.complete all as specified and directed by Engineer-In-Charge.
Demolition of cement concrete unreinforced in ground floors and pavings n.exc 15cm thick (below or above ground level) complete all as specified and directed by Engineer-in-Charge.
Material and labour for 75 mm thick cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in sub base under interlocking tiles complete all as specified and directed by Engineer-in-Charge.
Material and labour for 60 mm thick (M-35 mix) with grey cement and pigment, glossy rubber mould interlocking tiles (paver blocks red & yellow colour topping) conforming to IS-15658-2006 laid dry over 30 mm thick compacted sand bed, size & pattern of tiles complete all as specified and directed by Engineer-in-Charge.
Material and labour for fine aggregate (sand) complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster from walls of any description complete all as specified and directed by Engineer-in-Charge.
Material and labour for external cement plaster, rendering 15mm thick in (CM1:4) using WPC compound on brick or concrete surfaces of walls, finish surfaces even and smooth (without using extra cement) Complete all as specified and directed by Engineer-In-Charge. Note: WPC compound should be measured and paid seperately.
Supply only integral water proofing compound complete all as specified and directed by the Engineer-in-Charge.
Material and labour for applying one coat of primer on external surfaces of walls Complete all as specified and directed by Engineer-In-Charge.
Material and labour for applying two coats of weather proof exterior emulsion paint on surfaces of walls Complete all as specified and directed by Engineer-In-Charge.
Material and labour for 20mm thick Granite (of any type) tiles machine cut, as in floors, for base of wash basin, bedded and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone includng grinding and polishing complete all as specified and directed by Engineer-In-Charge.
Material and labour for providing precast reinforced cement concrete of type B1 (1:2:4) (using 20 mm graded stone aggregate) as in cover slabs for drain set in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.
Supply & fix TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engineer-in-Charge.
Supply & fix TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engineer-in-Charge.
Material and labour for glossy stainless Steel letters with LED back ligh complete all as specified and directed by Engineer-in-Charge.
Excavating in post holes (or similar holes) each n.exc. 0.5 cum, getting out in hard dense soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers, n.exc. 25cm, watering and removing surplus soil to a distance n.exc. 50m and making good surface complete all as specified and directed by Engineer-in-Charge.
Supply & fix mild steel work in tubular trusses/structures of square/round/ rectangular pipes, rafters, purlins including special shaped washer etc. complete using ERW or inductuin butt welded tubes confirming to IS-1161-1998 grade St-240 including notching, drilling, fitting, rivetting and or welding or connecting bolts and nuts, cleats, gusset plates etc complete all as specified and directed by Engineer-in-Charge.
Supply & fix prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
MUKUL ENGINEERING
M/s Bombay Novelty Stores
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .