REPAIR/REPLACEMENT OF PCC, CLEANING OF MONSOON DRAIN, SAUCER DRAIN, DRAIN COVER SLABS AND CONNECTED ITEMS OF AIR FIELD AT AF STN BHUJ

Amount

M&L for surface dressing n.exc 15 cm deep in soft/loose soil including cleaning away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots and trees n.exc 30 cm girth and removing rubbish upto a distance of 50 m outside the periphery of the area complete.

Rough excavation n ecx 1.5 m deep and getting out any type of soil

Removing excavated material exc 500m but n exc 1.5km and deposited where directed.

Forming embankments including raising (or lowering) earth, spreading in layers n exc 30cm thick, watering,ramming/rolling and finishing to required size, shape etc n exc 1.5m high from base (Note : lead for earth 500m)

Demolition of cement concrete unreinforced in ground floors and pavings exc 15cm thick (below or above ground level).

M & L for providing cement concrete type D2, 1:4:8 using 40mm graded stone aggrage as in foundations, filling and mass concrete complete all as specified and as directed by the Engr-in-charge.

M & L for 100mm thick cement concrete type B1, 1:2:4, using 20mm graded stone aggregate as in hard standing/ pavings in alternate bays including use of necessary formwork and finishing concrete topping even and fair without using extra cement and spike rolling to surface or making impressions of expanded metal , whilst the concrete is green complete all as specified and as directed by the Engineer-in-Charge.

M&L for 75 mm thick cement concrete type C-2 (1:3:6) using 40 mm graded stone aggregate as in sub base under interlocking tiles.

M&L for 60 mm thick (M-25 mix) glossy rubber mould interlocking tiles (paver blocks red & yellow colour topping) conforming to IS-15658-2006 laid dry over 30 mm copacted sand bed, size & pattern of tiles all as directed by Engineer-in-Charge.

M & L for forming contraction (dummy) joints 65mm deep x 10mm wide, filled with sealing compound of Grade 'B' complete all as specified and as directed by the Engr-in-Charge.

M & L for forming construction joint 30mm deep x 10mm wide filled with sealing compound, Grade 'B' complete all as specified and as directed by the Engr-in-Charge.

Dismantling plain or corrugated steel sheeting any gauge and any thickness sheets in walls, roof coverings etc, complete all as specified and as directed by EIC.

M&L for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M & L for providing cement concrete 1:3:6 C-1 (using 20 mm graded crushed stone aggregate ) as in coping ,kneelers ,apex, stones, bed plates,kerbs and the likes including weathering ,slightly rounded or chamfered angles and throating ,complete all as specified.

Demolition of precast concrete block walling of any description, built in cement mortar

M & L for providing precast cement concrete block masonry 1:5:8 with solid blocks exc 10 cm in width, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified.

M & L for 15mm thick rendering in CM1:4 on fair surfaces of brick work or concrete surfaces, is to be finished even and fair all as specified.

M&L for ploughing of soft ground arrester in the pattern prescribed by the Engineer in Charge using including deploying of tractor with jungle jim/plougher and a driver and cutting of grass around runway and taxi track all as directed by Engineer in Charge.

M&L for grass cutting by mechanical bush cutter around airfield lights, sign boards along with drian including deploying of labour complete all as directed by Engineer in Charge.

S & F 150mm wide high intensity RETRO REFLECTIVE ORANGE FILM on existing DTGM boards including scraping old flaky letters, cleaning with soap water & finally with plain water, for pasting retro reflective film of orange colour on existing boards of existing shape & size complete all as specified and as directed by the Engr-in-Charge. Make of Film: NIKKALITE / 3M / equivalent as approved by GE

Supply & Fixing in repair of Distance To Go Marker 2 Nos (1220mm X 1220 mm) made of compressed aluminum sheet of 4mm thick blackodised on one side where the compressed aluminum sheet and the marking of the number/letter are of red retro reflective film on black background and shall comply with ADM part 6 is supported in a frame made up of aluminum extrusion embeded 60cm below GL with PCC 1:4:8 type D-2 and 10cm above ground level including making ncecessary earth works etc complete all as specified and as directed by the EIC.

Dismantling mild steel work of any description not otherwise provided for complete all as specified and as directed by the Engr-in-Charge.

S & F for framed work such as grills, gratings etc, framed guard bars, railings and similar work conforming to Fe 290. Gde-E-165 complete all as specified and as directed by the Engr-in-Charge.

Taking out settled soil from drains not exc. 1.50m depth and getting out in soft/loose soils.

M & L for cement concrete type B1 1:2:4 mix (using 20mm graded stone aggregate) as in copings including use of necessary form work, weathering slightly rounded or chamfered angles and throating as directed

M&L for providing precast reinforced cement concrete, type B1 (1:2:4) (using 20 mm graded stone aggregate) as in cover slabs for drains, man holes etc., set in cement mortar (1:4)

M&L for preparation of new steel surfaces of any description over 10CM in width and applying two coats of synthetic enamel paint over a coat of red oxide primer.

ASHAPURA CONTRACTOR

BHAVANI PROVISION STORES

Jyoti Refrigeration

Khodiyar Construction

GOPI CONSTRUCTION