Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹13.8 LAccepted-AOC B 39 UPPER GROUND FATEH NAGAR NEW DELHI 110018 | WEST | DELHI | 110018 | 1 | Accepted-AOC AOC | |
| 2 | 2₹14.0 L+₹19,101 (1.38%)Rejected-AOC LESUWA BHACHABHAR RAMSAR | RAMSAR | BARMER | RAJASTHAN | 2 | Rejected-AOC NOT ACCEPTED | |
| 3 | 3₹14.9 L+₹1.0 L (7.41%)Rejected-AOC | 3 | Rejected-AOC NOT ACCEPTED |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY BHUJ
GE ARMY BHUJ
PROVN OF CERTAIN SANCTIONED WORKS AT BHUJ AND GANDHIDHAM UNDER GE(A) BHUJ
2023_MES_589324_2
8995
Open Tender
Civil Works
Item Rate
180 days
ARMY AREA BHUJ AND GANDHIDHAM
REFER TENDER
6 documents required · 6 mandatory
₹500
GE ARMY BHUJ
₹30,000
Yes
30 Jun 2023
26 May 2023
21 Jun 2023
26 May 2023
19 Jun 2023
1 Jun 2023
Amount
Excavation in trenches not exceeding 1.5 mtr wide and n. exceeding 1.5 mtr in depth for foundation in soft/loose soil.
M & L , PCC (1:3:6, type C2 Using 40 mm graded stone aggregate) as in concrete bedding to drain pipes including packiing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.
S & F 150 mm bore SWG confirming to IS laid to slope in trenches, jointed complete with collars complete all as specified and directed.
M & L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm thick each layer as in soil complete all as specified and as directed.
Removing excavated material (Soil/Rubbish/Debries) n. exc 50 mtr including debries lying at site and depositing where directed at a level n.exc 1.5 mtr above the starting point Complete all as specified and as directed.
M&L for soakage pits of size 3.0m dia and 4.5m effective depth/height with 23 cm thick brick masonery honey combed wall and dry stone filling incl covered slab with pre cast RCC cover complete all as per Drg no CEJZ/TD/29 Sht 2/3 complete all as specified and directed.
M&L for soakage pits of size 2.4m dia and 3.0m effective depth/height with 23 cm thick brick masonery honey combed wall and dry stone filling incl covered slab with pre cast RCC cover complete all as per Drg no CEJZ/TD/29 Sht 2/3 complete all as specified and directed.
Surface dressing n. exc 15 cm and avg 7.5 cm deep getting out soft loose soil incl site clearance. Complete all as specified and as directed.
Removing excavated material (Soil/ Rubbish/ Debries) n. exc 50 mtr including debries lying at site and depositing where directed at a level n.exc 1.5 mtr above the starting point Complete all as specified and as directed.
M&L rendering 10 mm thick in CM 1:6 on PCC block masonry brick work or concrete surfaces to be finished even and smooth without using extra cement in internal walls.
M&L rendering 15 mm thic in CM 1:4 on PCC block masonry brick work or concrete surfaces to be finished even and smooth.
M&L preparing new plastered surfaces of wall & apply three coat of white wash over a coat of lime putty cpmplete all as specified and directed.
M&L preparing new plastered surfaces of wall & apply two coat of coloured cement base paint over one coat primer using white cement on all external wall.
Pre-cast cement concrete block Type C1 1:3:6 (20 mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete
m&L two coat of synthetic enamel paint over 10 cm width or girth,not otherwise described over a coat of redoxide on new surface incl preparation
S&F Roof trusses (framed) trusses purlins and fastening (etc.,angle, channel,tubular section,round pipe) or flat section including distance pieces, MS plates/ gusset plates, cleats, hold fast etc. conforming to Gde of steel Fe 410-0 or Fe 310-0 complete all as specified and directed.
S &F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550MPa as in roof covering / cladding to wall, fixed with L or J hooks all as specified and directed.
M&L for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate),75 mm thick, as in sub base for floor, finished even and rough complete all as specified and directed.
M&L PCC 1:2:4 type b1 using 20mm graded stone aggregate as 25mm thick finished fair all as speificed
Excavation in trenches not exc 1.5 mtr depth for foundation etc n.exe 10sqm on plan in and getting out in hard dense soil.
M/L for providing PCC 1:4:8 type D2 using (40mm graded stone aggregate) in foundation, filling and mass concrete, levelling course etc.
Returning filling in including spreading, levelling, watering and well ramming in layer nexc 25 cm in soil
Removing excavated material soil n.exc. 500m and depositing where as directed
S & F 125 x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed
S & F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides
100mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed
200 mm long 10 mm dia Al tower bolt
150 mm long Mild steel pressed handles, oval type, stove enamelled black
150mm Long, 16mm Dia Alu. Aldropbolt
S & F powder coated anodised Aluminium alloy sections sliding windows with frames Series-C (20mm), 3 track sliding shutters duly fitted with neoprene beading, glazing clips, two shutters tinted glass panes 4.80 mm nominal thickness one shutter with stainless steel wire cloth 0.45mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed. Note : Making all edges i.e. cill and jamb good by cement mortar 1:3 including powder coated aluminium deco grill medium grade of mesh size 75mmx75mm with 6mm square anodised aluminium bars fixed with aluminium frame of size 37x19x2mm all as specified
Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 75 mm thick, watered and rammed to a true surface
PCC for 50 mm thick (1:3:6) type D-2 using 20 mm graded stone aggegate
M&L TMT bars 10 mm dia and over cut to length bent to shape required including cranking,bending,spirally for hooping and binding with and including mild steel wire anealed not less than 0.9 mm dia
Ditto but 5 mm dia and over up to and including 10 mm dia in stirrups spacers and binders
Reinforced cement concrete (Design Mix, M-25) in beams, cantilevers, bressummers, lintels over 1.50 meter span
Reinforced cement concrete (Design Mix, M-25) in Chhajha
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels cantilevers, shelves including supports, overhungs etc. also splays between floors and beams etc. as in rough finished surfaces.
Supply and lay pipe uPVC pipe including fittings of size 50 mm (2.0") dia complete all as specified and directed
Supply and lay pipe uPVC pipe including fittings of size 25 mm (1.0") dia complete all as specified and directed
M&L for cutting of existing DI/CI pipe line in position for rectifying leakage and reducing to required length, in position, for insertion of collars or other fittings including necessory exvation and earthwork, dewatering etc,if any involed, complete all as specified and directed for 50 / 100 mm bore of pipes
Supply and fix ball valve 25mm dia including all fittings all as specfied and directed
Removing surplus soil obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting paint complete all as specified and directed.
Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
Suppy and filling sand in sand cushion all as directed.
Supplying and laying reinforced precast concrete cable cover, class LV, type 1Class LV, Type I, flat, size 250 mm x 150mm x 40mm
M/s Naganaray construction Company
Ramdev and Sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .