REPAIR TO INTERNAL WIRING, FITTINGS AND FIXTURES IN OTM ACCN ALONGWITH CERTAIN MISC WORKS AT MIL STN BHUJ UNDER GE ARMY BHUJ

Amount

Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC casing and capping of adequate size fixed on surface with PVC rawl plugs with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for One light/buzzer point controlled by one; one way switch. NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable brass screws and cup washers

All as per Item No. 02 here in above but One fan/exhaust fan point controlled by one, one way switch

All as per Item No. 02 here in above but One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch.

All as per Item No. 02 here in above but One 3 pin socket out let 5 amp point on the (same board) with other switches.

All as per item No. 02 here-in-before but with 2.5sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed. Make: Anchor Cat Part No- 3224 or equivalent others make as specified.

S&F switch flush type, 5/6 Amps, single pole, one way, 230 volts AC circuit complete all as specified and directed. Make: Confirming to Anchor Cat Part No- 95111 or equivalent others make as specified.

S & F Bell push, flush type 5 AMP AC 230 Volt single pole complete as specified. Make : Anchor or equivalent others make as specified.

S&F switch socket outlet five pin, 5 Amps, flush type, 230 volts AC circuit complete all as specified and directed. Make: Anchor Cat Part No- 50494 or equivalent others make as specified.

S&F switch socket outlet combination, multipurpose, three pin, 15 Amps & three pin 5 Amps controlled by one switch , flush type, 230 volts AC circuit complete all as specified and directed. Make: Anchor Cat Part No- 95615 or equivalent others make as specified.

S & F in repairs earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts as per cat No. DPSDPO20 of Havells or equivalent of L & T with and including one MCB, SP, 20A, 240 Volts as per Cat No MCCSP020 of Havells or equivalent of L & T, all as specified and directed.

S & F buzzer, ding dong AC 230 Volt single pole complete as specified. Make : Anchor or equivalent others make as specified.

S&F fan regulator electronic, step type, suitable for ceiling fans of any capacity, pre-wired 230 volts AC 50Hz supply 100Watt complete all as specified and directed. Make: Anchor Cat Part No 95501 or equivalent others make as specified.

S & F in replacement elegantly industrial general purpose box type luminaire, 1x18 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with electronic ballast, spring loaded rotor type lamp holders, connected block with and including 01 No LED lamp 18 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed. Make :Confirming to Cat part No IGP 131 LT8-16 of crompton greaves or equivalent of Wipro/Havells/Philips

S & F in replacement 9W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed. Make: Cart Part No LHEXARP7PN1W009 of Havells & equivalent in Philips/Cromton Greaves/Wipro

S&F lamp holder PVC / Polycarbonate type with cord grip cap suitable for LED/CFL lamp fitting complete all as specified and directed by Engr-in-charge

Supplying only LED lamp 14/15 Watt 6500 K complete all as specified and directed. Make : Crompton / Bajaj / Wipro/Havells

Taking down carefully MCBs, Metal clad plug, distribution boards/main switches of any type and size and S & F sheet metal enclosure powder painted for MCB DB SPN 08 way double door with IP-42 protection with Din rail and busbar complete all as specified. Make indo asian cat part No- KSLS008 Or Equvalent model of Havells/ L&T/Legrand.

Taking down carefully MCBs, Metal clad plug, distribution boards/main switches of any type and size and S & F sheet metal enclosure powder painted for MCB DB SPN 04 way double door with IP-42 protection with Din rail and busbar complete all as specified. Make indo asian cat part No- KSLS004 Or Equvalent model of Havells/ L&T/Legrand.

Supply and fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed. Make :Havells/Indoasian/L&T/Legrand.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed. Make :-Havells/Indoasian/L&T/Legrand.

Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces and M & L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 4 Sqmm drawn through PVC conduit/casing capping including accessaries with 2.5 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

S & F in replacement LED light fitting 36 watt 2' x 2' complete prewired decorative type suitable for false ceiling ultra slim and connecting up with flexible cable 3 core 0.5 sqmm copper conductor to the ceiling rose including all accessories and fixing arrangement complete all as specified and directed. Make :- Havell's CAT part No. LHECDIL7IL1W036 or equivalent Crompton Greaves/Bajaj/Wipro/Philips.

S & F in replacement LED spot (recessed) white light 14 watt round type AC 90-260 volts including all accessories and fixing arrangement complete all as specified and directed.

S & F in replacement LED spot (recessed) white light 9 watt round type AC 90-260 volts including all accessories and fixing arrangement complete all as specified and directed.

Labour only for repairing and attending the complaint of Split/Window AC/ Water cooler/Refrigerator/deep freezer by highly skilled tradesman and carryout minor repair and making functional complete all as specified and directed at site. Note :- (replacement of spare part will be measured and paid separately under appropriate items )

Disconnecnting, dismantling and taking out the non functional Air Conditioner window type/Split type of any description, any make and in any position 1.5 TR/2.0 TR capacity Single Phase 50 HZ, strip opening, coil of indoor unit and brazing the discharge and suction line by and checking & retightening of all electrical connections. Replacement of minor part such as nut, bolts, screws, washers, fixing properly bracket housing of capacitors, relay incl replacment of unserviceable parts, cleaning and servicing of the AC with using caustic soda/detergent powder solution, taking out and removing unserviceable/defective wiring & parts incl painting the bottom with one coat of black synthetic enamel paint, replacement of unserviceable and defective parts brazing reassembling and testing of the AC complete all as specified and directed. Note :- (i) The replacement of defective/nonfunctional parts shall be measured & paid for seperatly as` supply only' under appropriate item of Schedul A and fixing charges for new items are deemed to be included under this item. (ii) The rate for above items are deemed to include for transpotation of AC to & from workshop as approved by Engr-in-Charge for necessary unserviceable screws/nuts/bolts /washer/packing etc with new one. (iii) Charging of gas if required shall be measured and paid for separatly under appropriate item of schedule A however vacuum and pressure leakage testing with nitrogen (N2) if any required is deemed to be included under the units rate quoted by the contractor for this item.

Disconnecting, dismantling and taking out the non-functional water coolers of any description, any make and in any position, capacity 40 ltrs to 150 ltrs, including water connections, single phase AC connection, 50 Hz, strip opening, cleaning and servicing of the water cooler with using MAIC-DS solution with and including taking out and replacing unserviceable/defective wiring & damaged/un-serviceable parts, necessary brazing, reassembling water cooler, restoring water supply connections and testing of the water coolers complete as all specified and directed. Note :- (i) The replacement of defective / nonfunctional parts/damaged body portions shall be measured & paid separately as “Supply only” under appropriate item of Sch ‘A’ Part -I and fixing charges for new/ repaired items are deemed to be included under this item. (ii) Burnt out windings, if any, replaced, shall be measured and paid for separately under appropriate item of Sch ‘A’ Part-I. (iii) Internal wiring, if any, replaced, shall be measured and paid for separately as 'supply only' of internal wiring kit. (iv) The rates for above items are deemed to include for transportation of Water coolers to & from workshop as approved by Engineer-in-charge for necessary repairs and testing of Water coolers at workshop & replacement of necessary unserviceable screws/nuts/bots/ washers/ packing etc with new one. (v) Charging of gas to make up required pressure, if any, shall be measured and paid separately under appropriate item of Schedule `A'. However, vacuum and pressure leakage testing with nitrogen (N2), if any required, is deemed to be included under the unit rate quoted by the contractor for this item. (vi) Rates quoted by the contractor for this item are also deemed to be included for de-scaling of chilled water pipe line including brazing of damaged portion of pipe line.

Disconnecting and taking out the non-functional Refrigerator/Deep Freezer of any description and in any position, strip opening of Refrigerator/Deep Freezer 165 Ltr. to 490 Ltr. Capacity, cleaning and servicing, taking out un-serviceable / defective parts/spares and internal wiring, replacement of un-serviceable parts/spares like Relay, capacitor, wiring , over load protector, Compressor, inner liner Puff, evaporator, freezer, condenser, Lamp & holders etc. necessary brazing, reassembling and testing all as specified and directed. Note :-(i) Replacement of un-serviceable parts shall be measured paid for separately under appropriate item of sch ‘A’ as supply only but fixing and testing element of the parts replaced / repaired is deemed to be included in this item. (ii) The rates for above items are deemed to include for transportation of Refrigerators to & from workshop as approved by Engineer-in-charge for necessary repairs and testing of Refrigerators at workshop & replacement of necessary unserviceable screws/nuts/bots/ washers/ packing etc with new one. (iii) Charging of gas, if required, shall be measured and paid for separately under appropriate item of Schedule `A'. However, vacuum and pressure leakage testing with nitrogen (N2), if any required, is deemed to be included under the unit rate quoted by the contractor for this item.

S&F compressor sealed unit suitable for 1.5 TR Capacity for any type of window AC Single Phase 230 Volts incl brazing to suction & discharge line vaccum testing with and including charging of refrigerant gas (R-22) & testing incl disconnecting and taking out existing defective compressor of any description & in any position complete all as specified and directed. Make, Kirloskar,Tecumsha, Whrilpool

All as per Item No. 31 here in above but for Window AC 2 TR Capacity Make, Kirloskar,Tecumsha & Whrilpool

All as per Item No. 31 here in above but for Split 2 TR Capacity Make, Kirloskar,Tecumsha & Whrilpool

All as per Item No. 31 here in above but for Split 1.5 TR capacity Make, Kirloskar,Tecumsha & Whrilpool

S&F Flame proof compressor sealed unit suitable for 2 TR Capacity for Flame proof AC Single Phase 230 Volts incl brazing to suction & discharge line vaccum testing with and including charging of refrigerant gas & testing incl disconnecting and taking out existing defective compressor of any description & in any position complete all as specified and directed. Make: Shriram/Tecumsha/ Whrilpool

S&F in replacement of Sealed unit compressor for 40/80 ltrs capacity water cooler including vacuum testing and filling of refrigerant gas to required pressure. Make : Emerson Copland / Carrier/ Bluestar/ Tecumsah

M&L in replacement Sealed unit compressor for 165 ltrs capacity including vacuum testing and filling of refrigerant Gas to required pressure Make : Godrej /Tecumseh / Voltas /Whirlpool/ Emerson / Copland

All as per Item No. 37 here in above but for 220 to 320 ltr capacity

All as per Item No. 36 here in above but for 330 to 490 ltr capacity

M&L for replacment of old unsv starting relay box carefully from window/Split type A/C 1 to 2 TR capacity of any make including making necessary elect connections, (Make - Arvind/Shriram)

All as per Item No. 40 here in above but for water coolers 40 to 150 Ltr capacity (Make Arvind/Shriram)

All as per Item No. 40 here in above but for Refrigerator and deep Freezer any make & type (Make- Renutrol/Hitech)

S&F in replacement over load protector suitable for 1.5 AC/WC 40/80 Ltr capacity Make: Renutral / Shriram/Usha/Keltron or equivalent

All as per item no 43 here in above but for 2.0 Ton AC / 120ltr WC capacity

All as per Item No. 43 here in above but for Refrigerator and Deepfreezer for any size of capacity

S&F Thermostat suitable for A/C, Water coolers, Refrigerators, Make- Kelton/Infass/Renutrol

S & Fix repair Starting capacitor 240 V, Make Kelton/BHEL/Tesla of the following size complete all as specified and as directed for 80 to 100 MFD

S & Fix repair Starting capacitor 240 V, Make Kelton/BHEL/Tesla of the following size complete all as specified and as directed for 100 to 150MFD

S & Fix repair of Running capacitor 240 Volts, Make Epcos,Tesla of following size for 4/6 MFD

S & Fix repair of Running capacitor 240 Volts, Make Epcos,Tesla of following size for 30/36 MFD

S & Fix repair of Running capacitor 240 Volts, Make Epcos,Tesla of following size for 45/50/60 MFD

M&L for charging of refrigerant gas R-22/R-410A complete unit or to make up required pressure in existing air conditioner, window type invertor split AC/hot & cold split AC of any description any capacity any make and in any position complete all as specified and directed complete all as specified and directed.

M&L for charging of refrigerant gas 134A/600A to make up the required pressure in any type refrigerator complete all as specified and as directed.

Disconnecnting and taking out existing defective AC electric motor of any description & in any position of size 1/7 HP to 1/5 HP 230 Volts, strip opening for rewinding and removing to & from workshop for rewinding as apporved by Engr-in-Charge, rewiding with appropriate size copper supper enameled wire as approved incl insulating material such as illuminous paper, leatherized paper , cotton tape, glass sleeving, insulating varnish etc, testing at workshop to the entire satisfaction of Engr-in-Charge, transpotation & fixing the motor at site incl necessary connecting & testing complete all as specified and directed.

S& F in replacement fan motor AC 230 V high speed suitable for split AC 1.5/2 ton for any Make of AC all as specified and directed.

Supply and fix in repair copper made Condenser/Evaporator coil assembly complete suitable for 1.5/2.0 Ton window type/Split type AC unit complete including necessary brazing, welding, pressure and testing etc, replacement of worn out misc items required at site complete all as specified and as directed.

Supply and fix in repair copper made Condenser coil assembly complete suitable for all type Refrigerator complete including necessary brazing, welding, pressure and testing etc, replacement of worn out misc items required at site complete all as specified and as directed.

S&F in replacement Swing motor for indoor unit of Split type AC 1.5/2 Ton capacity all as specified and directed.

S&F in replacement of PCB of electronic circuit complete including display panel, signal receiving slot, display PCB (ie Remote) all as per existing one and suitable for 1.5/2 Ton Window type A/C : Make Blue Star, Videocon, LG, Samsung

All as per item No 59 but for 1.5/2 Ton Split Type A/C Ltr capacity

All as per item No 59 but for Refrigerator any make & type.

M & L for repair of defective electronic components in PCB circuit plate of Window/split type AC /Refrigerator of any model as directed.

Supply and fix in replacement of remote controller unit of Air Conditioner Split Type/Window type of any description any make and in any position 1.5/2 TR capacity

S&F in replacement capillary assembly suitable for 1.5/2 Ton capacity AC Make : SRIRAM/RENUTRAL

S&F in replacement of front cover including grill panel of window type A/C of capacity 1.5 / 2 Ton as per existing one. Make : Blue star / Videocon / Amtrex / GEM or equivalent

S&F in repair of blower motor suitable for 230 volts three speed of Blower motor three speed 1/7HP to 1/5 HP 900 rpm suitable for 230 volts of 1.5/2 TR AC.

Supply and fix in replacement blower motor 1/10 HP, 1350 RPM suitable for Split type AC 1.5/2 Ton out door unit single ended or double ended shaft as per existing one. Make :- AUE/Marathon Electric

S&F in replacement of air filter pad of nylon cleanable/washable type of existing thickness for Split type AC 1.5/2.0 ton Capacity as per existing sample all as specified and directed

S&F in replacement of drain pipe for water Cooler & Split type AC 1.5/2.0 ton Capacity as per existing sample all as specified and directed

M&L for testing of complete existing Window type/Split type AC unit of any description, any make & in any position by vacuum and pressure testing with Nitorgen (N2) and brazing the leakage/damaged copper pipe as required at site and charging of the refrigerant gas to required pressure and testing on completion complete all as directed. Make:- as per existing make of unit.

Dismantling and taking out exiting defective Copper tubing off Size of any description & in any position and supplying and fixing new copper tubing special annealed pressure copper purity min 99.9% and making flairing at both ends for connections including Brass nut of any size as required and incl insulating material etc and testing complete all as Specified and directed.

Supply and fixing fan blade of any type and any description suitable for motor of any capacity for AC/water cooler/Refrigerator complete all as specified and directed.

Supply and fixing wall mounting stand suitable for Split type AC incl two coat of painting complete all as specified and directed.

S&F in replacement of flare valves for Split type AC 1.5/2.0 ton Capacity as per existing sample all as specified and directed

S&F of workshop cable for lead wire pvc seathed 3 core size 40/0.0076 of multistranded copper conductors for water coolers/ AC complete. Make Polycab/Havells/Finolex

S&F of workshop cable for lead wire pvc seathed 3 core size 23/0.0076 of multistranded copper conductors for Desert coolers/ refrigerators complete. Make Polycab/Havells/Finolex

M&L for scrapping out old bubbled paint, cleaning the surface, leveling, spray painting with one coat of synthetic enameled paint over one coat of primer as per existing colour to Water cooler any make and type at site including writing MES/SM/SL No with black enameled paint complete all as specified and directed. Note :- painting will be carried out at site by bringing compressor machine rate quoted deemed to be included complete.

All as per item No 78 but for window/Split type A/C up to 2 TR capacity

Taking out existing damaged/unserviceable copper tube insulation of any description & in any position and supply and fixing new insulation for copper tube of any size complete all as directed .

M&L for Replacement of existing unserviceable / damaged portion of the body of the water coolers i.e. in bottom / top / frame etc. with and including using new, 18 SWG, MS black sheet, cut to size, made to shape and size including necessary mouldings etc and fixing and riveting /bolting with existing parts / portion of the water cooler complete all as specified and directed.

Disconnecting dismanlting and taking out the functional Air Conditioner window type of any description any make and in any position 1.5/2 TR capacity Single Phase 50 HZ and reassembling fixing and testing the dismantled AC in new position complete all as specified and directed Note:- (i) The rate for above items are deemed to include for transportation to any distance inside the Army Area as appoved by Engr-in-Charge (ii) Charging of gas if required shall be measured and paid separatly under appropriate item of schedule `A'

Disconnecting,dismantling and taking out the functional air conditioner split type of any description, any make, and in any poition single/three phase 50 HZ and reassembling, fixing and testing incl installation of AC in new position/location after making necessary cutting/opening in wall and making good to match with the existing surface complete all as specified and directed Note : (i) The rate for above items are deemed to include for necessary servicing, cleaning and testing of indoor/outdoor unit of AC & replacement of necessary unserviceable screws/nuts/bolts/washer/packing's etc with new one brazing of copper pipe & provn of pvc drain pipe of suitable size & length for split AC transpotation to any distance inside the AF area as approved.(ii) Charging of gas in required shall be measured and paid seperatly/under appropriate item of schedule A

Supplying only LED torch light of rechargeble one of 3 W capacity, Lithium battery complete all as specified and directed by Engr-in-charge . Make : Wipro CL0004 or equivalent

M&L for repair of electric wiring, PCB Circuits , relays,contactor etc and replacment of defective wiring of Automatic Voltage Stablizer of 1/2/3/5KVA capacity of any make and carryout minor repair of PCB by changing resistance,condensor,transistor,indicator lamp,2 way switch ,PVC insulating sleeves etc and making functional complete all as specified and directed at site.

Supplying and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended be insulating hangers not more than 1 mtr apart incl 4 mm suspension wire, one twin core flat cable of size 6 Sqmm complete all as specified and as directed.

Supply and fix in replacement AC electric condenser motor 25 Watt, 230 Volts, 1250 RPM single speed for water cooler complete all as specified and directed Make : AUE / GE

Supply and fix in replacement AC electric condenser motor 30 to 35 Watt, 230 Volts, 930 RPM single speed for water cooler complete all as specified and directed Make : AUE / GE

S&F in replacement NRV suitable for 40/80 Ltr capacity water cooler storage type as per existing Make and Model.

S&F in replacement chromium plated push/lifting cock, 15 mm, made up of brass and suitable for 40/80/150 Ltr capacity storage type water cooler as per existing Make and Model.. Make : JOHNSON/COSMA

Removing the unserviceable condenser fan motor from the Water cooler of 40/80/150 Ltr capacity and M&L for rewinding of condenser fan motor of capacity 1 / 30 or 1 / 32 HP 1350 RPM single phase, with super enamelled copper wire of existing gauge including replacement of gunmetal bush, cleaning, greasing and refixing of motor, in position connecting up all including testing and refixing complete all as specified and directed.

M&L for opening body of water coolers, taking out cooling tank to rectifiy leakage of refrigerant tube/condensor and refixing the same after carryout necessary repairs, including leakage test, filling insulation material and clamping with GI strip complete all as specified and directed.

M&L for repairing of foundation/bottom base of water coolers any make & type with suitable size angle iron by welding/screwed/screwed/nutbolts after giving proper shape and making good complete all as specified and directed.

Supply only following new parts suitable for refrigerator of any description, make and capacity 165 ltrs to 490 ltrs:- (a) Freezer door with spring & clamp complete all as specified and as directed. Note :- (i) Make of the parts must be same as per existing Refrigerator (ii) The cost of fixing and testing of spare parts is deemed to be included under Schedule `A' item No.3 Sch A Part IV

All as per Item No. 94 here in above but Pin type / screw type bulb Make : Philips/ Bajaj/ Crompton

All as per Item No. 94 here in above but Chiller tray plastic

All as per Item No. 94 here in above but Refrigerator Freezer coil & freezer coil type / roll bound type for 165 ltrs to 230 ltrs capacity

All as per Item No. 94 here in above but Refrigerator Freezer coil & freezer coil type / roll bound type for 250 ltrs to 360 ltrs capacity

All as per Item No. 94 here in above but Fan motor of frost free for double door refrigerator of capacity 300 to 360 ltrs

All as per Item No. 94 here in above but Freezer box suitable for all type refrigarator

All as per Item No. 94 here in above but Main door gasket magnetic type

All as per Item No. 94 here in above but Bi-metal thermostat of capacity – 5 0 C cut in temperature for 300 to 360 ltrs capacity

All as per Item No. 94 here in above but Freezer defrost Heater

All as per Item No. 94 here in above but Door shelf bin & retainer bar

M&L for repair of desert cooler of any type and capacity and of any make and making necessary replacement of unserviceable and defective items complete all as specified and directed.

S&F in replacement of electric pump motor 1/80 HP single phase 230 Volts AC 50 Hz including connecting and testing etc complete suitable for desert cooler. Make of pump : TULLU/AUE/Crompton

S&F in replacement of electric fan motor 230V, AC, 50 HZ, for the following sizes of fans as suitable for desert cooler for 300 mm Sweep Make : Cromoton/AUE/Khaitan/Tullu

S&F in replacement of electric fan motor 230V, AC, 50 HZ, for the following sizes of fans as suitable for desert cooler for 350 mm Sweep Make : Cromoton/AUE/Khaitan/Tullu

S&F in replacement of electric fan motor 230V, AC, 50 HZ, for the following sizes of fans as suitable for desert cooler for 400 mm Sweep Make : Cromoton/AUE/Khaitan/Tullu

S&F in replacement of Swing motor single phase 230 Volts AC 50 Hz including connecting and testing etc complete suitable for desert cooler. Make of motor : TULLU/Bajaj/Crompton

S & F in replacement wood wool /grass pads of approved quality and size alongwith square mesh of any size as required on ground to suit the existing door size of desert cooler.

S &F in replacement of plastic fan blade 3/4 wing suitable for motor 1/8 HP of desert cooler. Make : Crompton or equivalent

S & F in replacement of 5 Amps top 3 pin incl 3 mtr 2.5 Mtr flexible copper wire suitable for desert cooler Make : Anchor Anchor/Cona/Havells

S&F in replacement of control switches set of desert cooler as per existing sample

M&L for making new fan motor base incl with clamps, nut bolts, two coat of painting suitablefor existing type of desert cooler all as specified and directed.

S&F PVC transparent pipe set complete for distribution of water of desert cooler (having droping elbow -3 Nos, distribution 3 way ) as per existing size, including clamping by screw/strip all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 metres below ground level) connected to GI wire 4mm dia main earthing lead by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt all around earth plate, test point of phosphorous bronze / gun metal of size 75 mmx 75 mm x25 mm, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover reinforced with 8mm dia TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh, and 40 mm dia GI medium grade earth lead protection pipe, complete all as specified and directed. NOTE : Earth wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth strip / protection pipe etc. will be measured and paid for separately. Note :- The Sch of credit will be deducted offline from the amount of BOQ at the time of acceptance. The Sch of Credit has been mentioned in the tender documents in pdf form.

Sai Ram Electricals and Refrigeration Works

M/s Bombay Novelty Stores

Ashok Electric and Electronics