Installation of Road Safety retro reflective sign boards including 6 No. of Smart LED Screens at KASEZ, Gandhidham, Kutch, Gujarat.

ITEM NO. DSR NDSR DSR NDSR

A EARTH WORK

1 2.6 Earth work in excavation over areas (exceeding 30cm in depth, 1.5m in

width as well as 10 sqm on plan) including disposal of excavated earth, lead

upto 50m and lift upto 1.5m disposed earth to be levelled and neatly

dressed.

2.6.1 All kinds of soil CUM 150.00 177.50 0.00 26625.00 0.00

B REINFORCED CEMENT CONCRETE WORK

2 5.1 Providing and laying in position specified grade of reinforced cement

concrete, excluding the cost of centering, shuttering, finishing and

reinforcement - All work up to plinth level :

5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : CUM 150.00 9045.75 0.00 1356862.50 0.00

3 graded stone aggregate 20 mm nominal size de rived from natural

sources)

Digitally signed by SHUBHAM

Date: 2025.12.11 15:51:49 IST

Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)

Description of item

ITEM NO. DSR NDSR DSR NDSR

C ROAD WORK

3 16.59 Manufacturing, supplying and fixing retro reflective sign boards made up of

2 mm thick aluminium sheet, face to be fully covered with high intensity

encapsulated type heat activated retro reflective sheeting conforming to type

- IV of ASTM-D 4956-01 in blue and silver white or other colour

combination including subject matter, message (bilingual), symbols and

borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive

backing which shall be activated by applying heat and pressure conforming

to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized

aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle

iron of size 25x25x3 mm along with theft resistant measures, mounted and

fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made

up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size

100x100x5 mm at the bottom end and including making holes in pipes,

angles flats, providing & fixing M.S. message plate of required size, steel

work to be painted with two or more coats of synthetic enamel paint of

required shade and of approved brand & manufacture over priming coat of

zinc chromate yellow primer (vertical MS-Tee support to be painted in

black and white colours).Backside of aluminium sheet to be painted with

two or more coats of epoxy paint over and including appropriate priming

coat including all leads and lifts etc. complete as per drawing , specification

and direction of Engineer-in-charge.

16.59.1 Mandatory/ Regulatory sign boards of 900 mm diametre with support length

of 3750 mm (3M OR Equivalent Make)

16.59.2 Cautionary /warning sign boards of equilateral triangular shape having each

side of 900 mm with support length of 3650 mm (3M OR Equivalent Make) EACH 825.00 5559.75 0.00 4586793.75 0.00

Digitally signed by SHUBHAM

Date: 2025.12.11 15:51:49 IST

Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)

Description of item

ITEM NO. DSR NDSR DSR NDSR

D SIGN BOARD

4 NS Manufacturing, supplying and fixing ADS SIGN BOARD 3M OR

Equivalent Make made up of 3 mm thick ACP sheet, face to be fully

covered with high intensity encapsulated type heat activated retro reflective

sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver

white or other colour combination including subject matter, message

(bilingual), symbols and borders etc. as per IRC ; 67:2001, pasted on

substrate by an adhesive backing which shall be activated by applying heat

and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the

same with suitable sized aluminium alloy rivets @ 20 cm c/c to back

support frame of M.S. angle iron of size 25x25x3 mm along with theft

resistant measures, mounted and fixed with 2 Nos. M.S. Pipe 75mm to a

vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with

base plate of size 100x100x5 mm at the bottom end and including making

holes in pipes, angles flats, providing & fixing M.S. message plate of

required size, steel work to be painted with two or more coats of synthetic

enamel paint of required shade and of approved brand & manufacture over

priming coat of zinc chromate yellow primer (vertical MS-Tee support to be

painted in black and white colours).Backside of aluminium sheet to be

painted with two or more coats of epoxy paint over and including

appropriate priming coat including all leads and lifts etc. complete as per

drawing , specification and direction of Engineer-in-charge.

5 NS L Type Bollard 140mm height (regular),bottom dia 300mm and Top dia

80mm, GI Pipe with 1.25 crc white powder coated with Red strip 3M grade

as required, all completed as per the direction of Engineer In-Charge.

Digitally signed by SHUBHAM

Date: 2025.12.11 15:51:49 IST

Sr. No. DSR 2023 Unit QTY. RATE (Rs.) AMOUNT (Rs.)

Description of item

ITEM NO. DSR NDSR DSR NDSR

6 NS Supplying ,Installation ,Testing & Commissioning Of Smart Variable

Message Signs : 3M OR Equivalent Full Colour Single Sided 3m x 2m

SMD P6_6mm Pitch with 27000 pixels/ sqm Active Area: 2880mm x

1920mm {6 Cabinets size 960(h) x 960(w)mm} 3M IOT VMS screen with

Energy Monitoring Capability, The VMS SCREEN shall be installed on GI

structure cantilever single post grouted in M30 RCC foundation including NOS 6.00 0.00 2076800.00 0.00 12460800.00

smooth plaster, complete as required as per specification, erection &

commissioning of VMS Screen with Cabling and VMS Software and

Integration with ICCC for all the VMS (MEDIA PLAYER- WIFI) as

required, all completed as per the direction of Engineer In-Charge.

TOTAL 7191451.00 16936800.00

TOTAL FOR DSR/ NS ITEMS 24128251.00

Digitally signed by SHUBHAM

Date: 2025.12.11 15:51:49 IST