ADDITION AND ALTERATION TO P-06, P-7/1 AND P-7/2 BUILDINGS (03 OFFICER QUARTERS) AT CGRA NALIYA FOR ICGS JAKHAU

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft/loose soil.

Removing excavated material (soils) exc. 50m and n.exc 100m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L for hardcore (broken stone / boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) in sub-floors, sub-bases, floors and pavings etc

M&L for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade, with grey cement and pigment complete all as specified and directed.

M&L for cement concrete Type C1 1:3:6 (20 mm graded aggregate) in edges of path, rounded or chamfered on edges etc

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L for preparation of new or previously untreated brick, stone, concrete, asbestos cement or plaster surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of primer

Supply and planting of golden hedges of height 30 cm and above, flower / plant of approved sapling species, 06 plants per running metre, including necessary ground preparation and developing of earth pit of size 45x45 cm, filling with farmyard manure, pesticides & Fungicides to the required quantity and quality complete all as directed by Engr-in-Charge.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exceeding 1.50 sqm and n.exc. 4 Sqm each

S & F factory made single extruded WPC (Wood Polymer Composite) for door solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,

modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S & F factory made single extruded WPC (Wood Polymer Composite) for door solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,

modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.

S & F flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 40 mm, both faces are covered with decorative face veneer with lipping/ frame to match.

S&F 35mm thick IInd class hard wood glazed and skelton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats, etc completed all as specified and directed by Engr - in - charge.

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over coat of pink primer.

Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar, depth of embedded portion of hold fast or lugs measured from the face of the jamb into the wall exc half brick but n. exc one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required.

S&F 100mm size medium weight stainess steel hinges, complete all as specified and directed by Engr-in-charge.

S&F 300mm, Mild steel ordinary rat tail rod pattern springs including roller and roller plate, etc complete all as specified and directed by Engr-in-charge.

M&L for 200mm long, Stainless Steel (SS -316), barrel tower bolts of extruded section and fixed with SS screw, etc complete all as specified and directed by Engr-in-charge.

M&L for 150mm long, Stainless Steel (SS -316), barrel tower bolts of extruded section and fixed with SS screw, etc complete all as specified and directed by Engr- in- charge.

M&L for 150mm long, Stainless Steel (SS), fancy type handles, fabricated type, SS (316) and fixed with SS screw, etc complete all as specified and directed by Engr -in- charge.

M&L for 125 mm long, Stainless Steel (SS), fancy type handles, fabricated type, SS (316) and fixed with SS screw, etc complete all as specified and directed by Engr -in- charge.

M&L for 250 mm long, Stainless Steel (SS), fancy type with SS -316, sliding door bolt with hasp, staple ( bolt type), 16 mm dia bolt and fixing with nuts and bolts, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed, etc complete and all as specified by Engr -in-charge.

M&L for 140mm long, Floor door stopper of stainless steel body and tongue, with hard drawn steel spring, fixed in floor, etc completed and all as specified by Engr -in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from frame) n. exc 1.5 sqm each

S & F Solid PVC Door Frame of size 50mm x47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening, edges will be painted to match with printed sheet, as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails, 5mm thick x15mm wide PVC sheet beading, decorative PVC beading of 10mm x 10mm (90⁰ ) and joined together with solvent cement, suppling & fixing in the frame, at site as per specification & drawing.

Taking down aluminum anodized window with grill including all accessories/fittings n exc 3.00 sqm each as directed.

S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing including powder coating (minimum thickness of powder coating 50 micron), etc. complete all as specified and directed by Engr-in-charge.

S & F anodised aluminium window and ventilator shutters, fixed/ sliding type without sash bar, aluminium section including powder coating (minimum thickness of powder coating 50 micron) weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, roller etc. complete all as specified and directed by Engr-in-charge.

S & F 4.8 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane.

S & F domal conceal lock for aluminium window, complete all as specified and directed by Engr -in- charge.

S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, ncluding cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engr-in-charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified.

M&L for 25mm thick PCC 1:2:4 type B-1(20 mm graded aggregate) as in sub base surface etc complete all as specified.

M&L for Screed bed or bedding layer or mortar 15mm thick for laying floor finishes in CM 1:4 complete all as specified.

M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for rendering 10mm thick in CM 1:4 as backing coat to receive dado finished etc completed all as specified.

M & L for coloured, Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified.

M & L for light shade , Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, etc complete all as specified and directed by Engr-in-charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedding and pointed in any mortar etc complete all as spd and directed.

M&L for Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including poining in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as specified

Cutting opening in cement concrete walls, with or without reinforcement (any description) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering etc.

Cutting out concrete blocks ,slabs, brickwork or stone masonry (in alter nate course) set in CM 1:6, forming toothings for and bonding new work in mortar into old work, including new materials entering old wall.

M&L for pre-cast cement concrete block masonry 1:5:8 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete

Use & waste of formwork to fair finished surfaces of curved concrete, chullah hoods, chajjas, troughs and similar items including edges.

M&L for TMT (CRS) bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for reinforced cement concrete M-30 (20mm graded aggregate ) in chajja complete all as spd and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.

M&L for rendering 10mm thick in cm 1:6 finished all as specified on fair faces of brick work or concrete surfaces, etc complete all as specified and directed by Engr- in- charge.

M&L for 3mm thick wall care putty on wall, etc complete all as specified and directed by Engr -in- Charge.

M&L for rendering 15mm thick (in two coats, 10mm 1st coat +5mm 2nd coat) to fair faces of brick or concrete wall surfaces in cement mortar 1:4 finished even and smooth (without using extra cement) including mixing only integral water proofing compound in second coat as per manufacturer's instruction. Note : a) Integral water proofing compond will be measured and paid separately.

Supply only integral waterproofing compound.

M&L for rendering 5mm thick in CM 1:3 on ceiling surfaces complete all as specified.

M&L for 3mm thick wall care putty on ceiling surfaces

Material and labour for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant priming paint all as specified and directed by Engr-in-charge.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant priming paint all as specified and directed by Engr-in-charge.

Material and labour for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant priming paint all as specified and directed by Engr-in-charge.

Material & Labour for applying Two coats of 100% Premium acrylic Emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces.

M&L for complete removal on existing treatment on surfaces of wall / chajjas etc in any position washing down with water and treating the surface from all loose dirt, chalk, grease, fungi, algae, flakes etc filling up all cracks and defects with CM 1:3 and applying two coats of weather coat antifungal acrylic emulsion paint exterior grade of approved make over a coat of weather coat primer all as per manufacturer's instructions complete all as directed by Engr in Charge.

Material and labour for preparation of old plastered surfaces of ceiling and applying two coats of oil bound distemper all as specified and directed by Engr-in-charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Material and labour for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates as in plinth protection finished fair and even without using extra cement, complete all as specified and as directed.

M&L for Post Constructional Antitermite Treatment to soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors.

M&L for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

M&L for Post Constructional Antitermite Treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors.

Dismantling water tanks exc 500 & n exc 1000, and removing to store.

M&L for rotational moulded polyethylene 1000 litres capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specifed and directed.

S & F 25mm dia SS curtain rod having 1mm thickness complete all as specifed and directed.

S & F stainless steel brackets for 25 mm dia SS curtain rod fixed with SS screw and nylon sleeves, etc complete all as specifed and directed.

S & F stainless steel decorative round curtain finials ends fixed with SS screw on the ends, complete all as specifed and directed.

S&F in repairs 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts, of length 450 mm

S&F in repair vitreous china, white, counter top wash hand basin (size-545x545x180mm), square/ round, including providing 32 mm dia chromium plated waste coupling & pipe and making all necessary connections complete all as specified and directed.

S&F in repair soap dish, round, acrylic body with chromium plated base complete all as specified and directed.

S&F in repair chromium plated toilet paper holder as directed by the Engr-in-Charge.

S&F wall mounted stainless steel bathroom towel rack hanger holder organizer(24 inch,silver) with fitting material etc complete all as specifed and as directed. Make-Jaguar, Code: ACN-1181S) or equivalent provided in Appx 'B' to particular specifications

S&F CP Towel Ring (Silver), complete all as specifed and as directed.

S&F in repair towel rail, 600 mm long complete all as specified and directed.

S&F in repair vitreous china, European type rimless water closet, white, with softly close white seat cover, hinges and other accessories including flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. (Make of WC : JAQUAR, Code: ONS-WHT-10753NS250UFSM for WC and Code: ONS-WHT-10203 for Cistern or equivalent provided in Appx 'B' to particular specifications (NOTE: Quoted rate shall be deemed to be inclusive of the cost of flushing cistern, seat cover and all other accessories for satisfactory completion of the the work. Make of flushing cistern and sheet cover shall be same as that of the WC)

S&F in repair 15mm bore chromium plated two way bib cock with flange (premium quality), fancy type complete all as specified and as directed.

S&F in repair 15mm bore chromium plated Hand shower (health faucet), 1 metre long flexible tube in chrome finish with wall hook complete all as specified and directed.

S&F in repair CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed

S&F in repair Chromium plated brass Angular stop valve/ cock, fancy type, fixed to 15 mm bore Iron pipe complete all as specified and directed.

S&F in repairs 15 mm bore pillar cock for wash basin (premium quality), fancy type, fixed to wash hand basin, complete all as specified and directed.

S&F in repairs 15 mm bore sink cock with regular swinging spout (wall mounted model) with wall flange, fancy type, fixed to wall for sink, complete all as specified and directed. Make : JAQUAR, Code : DRC-37347S equivalent provided in Appx 'B' to particular specifications

S&F in repair corner glass shelf 300 mm with brass brackets, as in repair complete all as specified and directed.

S&F in repair 450mm x 300 mm mirror cabinet with PVC frame, fixed to wooden plugs with cromium plated brass screw & cup washers complete all as specified & directed.

S&F in repair Over Head Shower 120 mm dia round shape single flow (ABS body chrome plated with grey face plate) with Rubit cleaning system, etc complete all as specifed and as directed by Engr - in - Charge. Make-Jaguar (OHS-CHR-1789) or equivalent provided in Appx 'B' to particular specifications

S&F in repair Brass Wall Mixer with provision for overhead shower with 115 mm long Bend Pipe and Mist and Massage Flow and without Hand Shower, etc complete all as specifed and as directed by Engr - in - Charge. Make-Jaguar(Code-COP-273PM) or equivalent provided in Appx 'B' to particular specifications

S&F SS grating of dia 125 mm dia, complete all as specified and directed by Engr-in-charge.

S & F in repair for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, Bore dia of pipe in 25 mm, etc complete all as specifed and directed.

S & F in repair for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms, Bore dia of pipe in 25 mm, etc complete all as specifed and directed.

M&L in repair 20mm UPVC pipes fixed complete to walls, ceilings or in floors, etc completed all as specified and directed by engr-in-charge.

M&L in repair 15mm UPVC pipes fixed complete to walls (Concealed), ceilings or in floors, etc completed all as specified and directed by engr-in-charge.

Providing & fixing factory made kitchen cabinet shutter/partition of required nominal thickness of approved shade , quality and make from rigid PVC ply/ celuka ply having density 600 kg/Cum the Exposed edges shall be sealed with PVC edge beading to same shade and colour the shutter shall be fire retardant having necessary screw holding capacity shutter shall be fixed to frame using approved SS Hinges/SS handle wih necessary stainless steel screws all complete as per direction of engineer-in-change (SS Hinges and Handles shall be paid separately)

M&L in repair for stainless steel trolley made with perforated sheet of not less than 1.52 mm thick and SS edging wire and slided over SS telescopic runners which is fixed in wall/stone with suitable screws of desired shape and size as specified and directed by engr-in-charge.

S&F in repair Stainless steel soft close hydraulic action hinge with capacity to take load of 12 to 20 mm thick board all as specified and directed by engr-in-charge.

S&F in repair magnetic catches brass body and striking plate with approved quality all as specified and directed by engr-in-charge.

S&F in repair heavy duty SS zinc plated telescopic runners for SS trolleys having fully extended length min 500mm and 45.4 mm wide, loading capacity 45 kg/pair including concealed screws and bolts fixed to wall or stone all as specified and directed by engr-in-charge.

S&F Shutter lock all as specified and directed by engr-in-charge.

S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm as directed.

S & F 2nd class hardwood,Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,etc complete all as specified and directed by engr-in-charge.

S&F in repair 18 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, approved shade including bedding fixed with screws to timber frame work etc all as specified and directed by engr-in-charge.

S & F in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, bore of pipe 110 mm complete all as specifed and directed.

S&F in repairs PVC (SWR) pipes 75mm bore single socketed in any length with ruber ring joints fixed to wall.

S & F PVC (SWR) bends any radius, bore of pipe 110 mm, etc complete all as specifed and directed.

S & F PVC (SWR) bends any radius, bore of pipe 75 mm, etc complete all as specifed and directed.

S & F for PVC (SWR) junction double, (double T), bore of pipe 75 mm, equal or unequal, etc complete all as specifed and directed.

S & F for PVC (SWR) junction double, (double T), bore of pipe 110 mm, equal or unequal, etc complete all as specifed and directed.

S&F 4mm thick figured glass, pin-headed type and glazing with oil putty in squares n.exc 0.5 sqm in each pane.

Dismantling of paver block including sand cusioning and removing debris from defence land complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/ loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface, complete all as specified as directed.

M&L for cement concrete 1:2:4 type B2, using 40mm graded stone aggregate for embedding posts, complete all as specified and directed by Engr-in-Charge.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240,etc complete all as specified and directed.

S & F rolled mild steel in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment, Fe 410-W (Gde-E-250) quality-A, etc

M&L for preparation of new steel surface over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete.

S & F Pre - painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S & F Pre - painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, fixed with self tapping screws as specified.

S&F mild steel hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

S&F framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165,etc complete all as specified and directed.

Taking down carefully copper point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling etc complete all as specified and directed by Engineer - in - Charge.

M&L for point wiring for one light point/fan point/ bell point controlled by one switch with 1.5 sqmm PVC FR insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FR insulated un-sheathed copper conductor single core multi stranded flexible cable (green color) as earth lead in and including cable 1100 volts grade in and including PVC concealed conduit (ISI marked) including modular steel box, cover plate with frame of suitable module as per site requirement including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

M&L for point wiring for 5A 3 pin socket outlet on independant board controlled by one switch with 1.5 sqmm PVC FR insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FR insulated un-sheathed copper conductor single core multi stranded flexible cable (green color) as earth lead in and including cable 1100 volts grade in and including PVC concealed conduit (ISI marked) including modular steel box, cover plate with frame of suitable module as per site requirement including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

M&L for point wiring for 5A 3 pin socket outlet on same board controlled by one switch with 1.5 sqmm PVC FR insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FR insulated un-sheathed copper conductor single core multi stranded flexible cable (green color) as earth lead in and including cable 1100 volts grade in and including PVC concealed conduit (ISI marked) including modular steel box, cover plate with frame of suitable module as per site requirement including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

M&L for point wiring for 15/16A socket outlet on independant board controlled by one switch with 4.00 sqmm PVC FR insulated un-sheathed copper conductor single core multi strand flexible cable and 4.00 sqmm PVC FR insulated un-sheathed copper conductor single core multi stranded flexible cable (green color) as earth lead in and including cable 1100 volts grade in and including PVC concealed conduit (ISI marked) including modular steel box, cover plate with frame of suitable module as per site requirement including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

M&L for sub main wiring with two run of 6 sqmm single core, PVC insulated, unsheathed multistranded copper FR cable 1100 volts conductor drawn through surface rigid PVC Conduit not less than 20 mm with all accessories and 6 sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity wire complete all as specified and directed. Note: Two runs of main cable, one run of earth wire and one run of PVC conduit will be measured as one unit for payment.

S&F LED Tube light of 1X20 W (4 feet) 230V which offers high lumen out put with excellent energy saving and maintenance free operation complete with all accessories and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as specified and directed by Engr-in-Charge.

S&F LED Tube light of 1X10 W (2 feet) 230V which offers high lumen out put with excellent energy saving and maintenance free operation complete with all accessories and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as specified and directed by Engr-in-Charge.

S&F Electronic bell AC 230 Volt single pole ding dong type complete all as specified and directed by Engineer - in - Charge.

Supply & fix Air Circulator BLDC fans 230 volts single phase oscillating 400 mm sweep suitable for wall mounting.

S&F building security light fitting with LED Type 25 watt optic lenses with all necessary accessories, Clear transparent acrylic cover, prewire suitable to operate on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe of suitable dia “light grade” brackets 1.5 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in - Charge

Supply and fixing Kitchen Chimney of size up to 90 cm of capacity not less than 1500 cum/hr complete all as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as directed.

M&L Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB complete all as specified & directed.

S&F Modular switch 1 way 6A, 1 module

S&F Modular switch 1 way 16A, 1 module

S&F Modular bell push, 6A, 1 module

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module

S&F Modular Socket 6A - 2/3 pin combined 2 module

S&F ceiling rose surface bakelite 65x50mm two to three terminal (ISI marked).

Supply and fixing 240V 10KA 'C' curve miniature circuit breaker (MCB) of SPN 6-32 Amp complete with connection, testing and commissioning.

Supply and fixing 240V 10KA 'C' curve miniature circuit breaker (MCB) of SP 6-32 Amp complete with connection, testing and commissioning.

S & F sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N, 8 ways, 415 Volts, ISI marked, 200 amps bus bar stove enamelled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in - Charge.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 Amp complete with connection, testing and commissioning.

Supply, laying, testing & commissioning of LT Cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables(heavy duty) with stranded aluminium conductor, 1100 volts grade, of cross sectional area 16 sq mm, 2.0 core all as directed.

Supply and fix double compression copper gland for fixing armoured cable of size 16 sqmm 2 core

Excavating in trenches , n exc 1.5 m wide and n exc 1.5 deep and getting out in hard / dense soil.

Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc 25cm in hard / dense soil complete all as specified and directed.

Removing excavated material (soils) n.exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M&L for dry Sand filling in cable trenches for protection of cables with two layers below and above cable and punned down to specified thickness complete all as specified and as directed. Note: Punned down thickness shall only be measured for payment.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, of size 250mm x 150mm x 40mm complete all as specified and as directed.

S&F 40 mm dia GI tubing light grade for cable protection.

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore GI med grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC/ Iron cover with handle all as specified and shown in elect plate No 3 of SSR Part-I of 2009 complete all as specified and as directed.

Krishna Engineering