ADDN ALTN TO CONCERTINA COIL FENCING OF PERIMETER WALL AROUND TECHNICAL AREA AT AF STN NALIYA

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness removing debries outside MD land complete as per specified & directed.

M & L for broken stone hardcore of guage n.exc 63mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rolled/ rammed to a true surface complete as per specified & directed

M&L 100 mm thick PCC type C-1 (1:3:6) using 20 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection complete as per specified & directed

Demolition of Reinforced Concrete of any description and in any position not otherwise specifically provided for removing debries outside MD land complete as per specified & directed

Demolition of PCC block masonry built in cement mortor or cement lime mortor including all quoins,arches, pillars etc removing debries outside MD land complete as per specified & directed

Dismantling mild steel work of any description and in any position (including barbed wire, concertina coil & flat iron of exsisting fencing) removing debries outside MD land complete all as directed.

Excavation over areas n exc 1.5mtr depth and getting out any type of soil complete all as per specified and directed.

Excavation in trenches n exc 1.50M wide and n exc 1.50M deep and getting out in soft/hard soil complete all as per specified and directed.

M & L PCC 1 : 4 : 8 type C-2 (by using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as per specified and directed.

S&F formwork to sides of concrete foundations, footings, bases of columns, sides and soffits of foundations and plinth beams and similar work vertical or batter including fair finishing surfaces as per specified and directed

M&L RCC M-30 Gde design mix concrete using 20mm graded aggregate to col footings and plinth beams, bases of columns etc complete all as per specified & directed.

M&L RCC M30 Design Mix in Beams, Cantilevers, bressummers, lintels over 1.5m span complete all as per specified & directed.

S&F Formwork to sides of pillars , posts, struts, piers, columns etc including fair finishing surfaces complete all as per specified & directed.

RCC M-30 Gde design mix concrete using 20mm graded aggregate to columns, pillars, posts etc complete all as per specified & directed.

S&F Formwork to sides and soffits of floor or roof beams, lintels, cantilevers etc including fair finishing surfaces complete all as per specified & directed.

M&L precast concrete block masonry (1:5:8) with solid blocks exc 10cm width and setting in CM (1:6) complete all as per specified & directed.

M&L rendering 10mm thick cement plaster (1:6) on fair faces of brick or concrete surfaces complete all as per specified & directed.

M & L for preparation of newly plastered surfaces of wall and applying two coats of acrylic exterior emulsion paint in camouflage pattern over and including a coat of primer complete all as specified and directed.

S&F UPVC pipes 100mm dia for weep holes/ in boundary wall complete all as per specified & directed.

MS TMT bars 10mm dia and over cut to length, bent to shape required, including cranking bending spirally binding with and including mild steel wire annealed not less than 0.9mm dia as per complete all as per specified & directed.

Description all as per item No 20.00 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as per specified & directed.

Returning filling in, including spreading leveling, watering and well ramming in layers not exc 25 cm complete all as per specified & directed.

Removing excavated material (soil) to a distance n exc 50 m and depositing where directed at level n exc 1.5 M above the starting point complete all as per specified & directed.

M&L Providing precast cement concrete in cover slabs set in cement mortal 1:4 type B1 1:2:4 (20mm greded aggregate) complete all as per specified & directed.

S&F 1050 mm dia (dia of coil when unstretched) punched tape razor blade galvanised barbed concertina coil(50 turns per coil) weight approx 15.25 kg (+/- 5%) expandable15 mtr,with medium barbs of barb length 24(+/-) mm,pitch between two barbs 35 (+/-)mm,width of barb back to back 13mm,thickness of the tape is 0.5mm,dia of the spring core wire is 2.6mm as fencing to steel post/struts fixed with nibs including fixing with special galvinsed fastners such as J clips,C clips, Uclips, complete all as per specified & directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as per specified & directed.

S&F Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of heavy duty galvanised mild steel wire, staples or staple pins etc as ditected complete all as per specified & directed. (Note: Each line wire to be measured)

M&L preparation and painting to new steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint including over a coat of primer complete all as specifeid and directed.

CHOUDHARY CONSTRUCTION CO

MADAN MOHAN JAIN sons

Vijay Construction Co

Krishna Engineering

M/S JAGDAMBA ENTERPRISES

KALIKAY ENTERPRISES