Construction of Shimla Pistaur (SVS) Water Supply Scheme including, Supply Installation, testing and commissioning of Rising Main, Distribution System, Construction of OHT all appurtenance work etc. complete within JJM program under Rudrapur Block

Rates for Construction of Shimla Pistaur (SVS) Water Supply Scheme including, Supply Installation, testing & commissioning of Rising Main, Distribution System, Construction of OHT all appurtenance work etc. complete within Jal Jeevan Mission program under Rudrapur Block.

Distribution System work

Providing, Lowering into trenches with true to alignment, Laying & Jointing of full lenghts of HDPE Pipes of specified grade as per IS:4984-1995 and specifications, with testing of pipe line including supply of jointing materials. PE-63 Grade; PN-6.0 (6.0 kg/cm2) 63 mm dia

75 mm dia

90 mm dia

110 mm dia

140 mm dia

160mm dia

Excavation in soil mixed with single bouldres etc. requireing the use of specials T&P, if any, for pipe line trenches including lift up to 1.5M and lead up to 30M with back filling, watering, ramming of excavated earth in the trenches.

80mm dia

100mm dia

125mm dia

150mm dia

Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation brick work in cement mortar 1:4(1 cement: 4 coarse sand ) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 (1 cement: 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3(1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : - With F.P.S. bricks.

Dismantling manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50metres as per direction of Engineer in charge- for bituminuous road.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer in charge- for Nominal concrete 1:3:6 or richer mix.

Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin- charge. (Old CC paver blocks shall be supplied by the department free of cost).

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design& shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres)Dismantling Stone Masonry Dismantling stone pitching/ dry stone spalls.

FHTC (Functional Household Tap Connection)

Providing of all materials, Carting from site store to site of work, Laying & Jointing of G.I screwed pipes (including supply of all jointing materials like specials, white lead, hemp and oil etc) in trenches with its cutting, threading and testing of pipe line etc complete. 15 mm dia GI Pipe

Making ferrule connection in the existing main of G.I, A.C, PVC or any type of pressure mains with saddle piece, service connections, fittings and fixing of G.M. ferrule including tapping the main, but excluding the cost of earth work and cost of all materials. 19.01 Ferrule Connection (Labour cost only)/Connection Ferrule Connection (Labour cost only)

Cost of Material for ferruling in FHTC per connection

Repairing work for OHT campus 1-Renovation of pump house with operator room

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with exterior paint of required shade - New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).

62 mm thick cement concrete flooring with concrete hardener topping under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume. Hardening compound is mixed @ 2 litre per 50 kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Providing & fixing fly proof wire gauze to windows and ventilator with M.S. Flat 15x3 m and nuts & bolts complete. - Galvanized M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides.

Painting Steel work(doors, windows, etc.) with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture.

2-Repairing of Boundary wall

Ist class Brick work 1:6 in super structure including necessary cutting and moulding as required and thickness of wall one brick. including supply of all materials, labour and T&P etc. required for proper completion of the work

12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

3-250 KL OHT Repairing work

For cleaning and conditioning of OHT

For arrest leakages.

Misc Items like ladder, stair case, ventilation shaft, plinth, drain around plinth, etc.

Electric and Machenical works 1-SITC pumping plants & accessories for tube-well

Submersible pump set, KSB make of 500 LPM, 50 Mt. head suitable for 300mm dia Assembly operating at 3 phase 50Hz AC supply.Spare pump set

Supply installation testing and commissioning of three phase digital rolling contact survo voltage stablizer suitable for unbalance voltage and unbalance load including fixing of proper size copper lugs on input and out put cable both end at defferent sites on turnkey basis including five years cost free maintenance. Input voltage 280-460 volts (phase to phase) capacity - 25 kva

2- E & M WORK AND ACCESSORIES FOR TUBEWELL

Lifting/lowering of 150 mm dia. Column pipe with supply and fixing including nut bolt, rubber packing, submersible cable jointing and NRV repair complete in all respect including cost of materials with all T&P required.

Supply, installation, Testing and Commissioning (SITC) on turnkey basis for fully automatic pump automation control panels of different capacities having intelligent unit having "FIELD PROGRAMMABLE LOGIC CONTROLLERS based, SCADA operated pump motor start, Run, control, Protect against faults automatically operated control & management system" for supervisory control and data acquisition system at pumping water supply schemes & two years free of cost A.M.C. for warranty period of following duties as per specifications sheet enclosed & suitable for integration in the existing including cartage from works of manufacturer upto site of work:-20HP

Supply and fixing of 400 Amp TPN main switch 3 phase, 415 volt, 50 H havells make heavy duty double break main switch with HRC fuse making connection at this testing complete work etc for tubewell.

Main piping and valves as per specification.

Supply of 150mm dia Column pipe, 6.4 mm thick -

Supply and fixing of suitable 16 mm thick MS Flange for column pipe both end with fixing trangle support and cutting of groove for cable all complete with labour & T&P

150mm dia size column pipe M.S. clamps..

Supply of 3 Core flat submersible cable Cable 3/35.0 sq.mm suitable for Submersible

Supply of Tool Kits etc. comp.

Lifting tackle 3 tonne capacity Chain pulley. taparia make

M/S SUNIL KUMAR GAUR CONTRACTOR