REPAIRS TO PATH HARDSTANDING AND SHED AT AF STATION NALIYA

Amount

Demolition of cement concrete in ground floors and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of brick/block work or stone/boulder masonary built in cement mortar complete all as specified and as directed.

M&L for pre cast cement concrete block masonary with solid block of cement concrete 1:5:8 exc 10 cm in width and setting in CM 1:4 complete all as specified and as directed.

M&L for providing cement concrete type B1, 1:2:4 (using 20 mm graded aggregate) as in surface channels and drains complete all as specified and directed

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as speicifed and directed

M&L for rendering 10 mm thick to block walling in CM 1:4 finished even and smooth with out using extra cement complete all as specified and as directed.

Cleaning existing drainage/culevrts upto 1.50 m depth including removing cover slabs, soils, spoils, vegetation, silt etc and refixing cover slabs including making good in cement mortar 1:6 and removing material outside the MD land complete all as specified and directed Note :- Payment shall be made based on stacked measurement of debris/waste materials removed from drains and culverts etc

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water complete all as specified and directed

M&L for rendering 15 mm thick cement plaster in two layers, 10 mm thick backing coat in cement mortar (1:6) and 5 mm thick finishing coat in cement mortar (1:4) on fair faces of brick work or concrete surfaces including finished even and smooth with out using extra cement, using water proofing compound @ 3 % by weight of cement in finishing coat or as per manufacturer's instructions complete all as specified and directed Note :- Water proofing compound shall be measured and paid for seperately as supply only under relevant item.

M&L for preparation of newly plastered surfaces and applying two coats of 100 % acrylic anti-fungal paint over a coat of primer complete all as specified and directed

Supply only integral liquid water proofing compound

Demolition in reinforced cement concrete of any description and in any position not otherwise speciffically provided for complete all as specified and directed

M&L for steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and bining with and including mild steel wire (annealed) not less than 0.9 mm dia securing with complete all as specifed and directed

M&L for RCC precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in manhole cover slab, drain cover slab set in CM 1:6 including necessary form work complete all as specified and directed Note :S&F of reinforcement shall be measured and paid seperately

Dismantling fencing wiremesh, any type in any position and seperating the materials and removing the unserviceable wiremesh from work site complete all as specified and as directed.

M&L for excavation in post holes each n. exc 0.50 Cum and getting out in soft/loose soil including returning, filling in and ramming earth etc and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation and mass concrete complete all as specified and as directed.

S&F for PVC coated fabric fencing mesh of size 50 mm x 50 mm made of GI wire of dia 3 mm to achieve outer dia not less than 4 mm in required colour and shade fixed in posts bolts, drilling holes, notching for wire, flat iron fillets (for securing wire mesh etc) necessary drilling, bolting or reiveting to existing steel or new steel posts complete all as specified and as directed.

S&F MS angle, flats etc independently fix without connecting plates etc but to ordinary length conforming to Fe 310 or Fe 410-O as in fencing posts/cover plate including drilling holes for nuts and bolts etc complete all as specified and as directed

S&F MS Screw bolts (machine made) 12 mm dia exceeding 150 mm & not exceeding 225 mm long haxagonal or square head at one end and screwed other end to be fixed with one washer and one hexagonal nut, the other end to be embedded in RCC fencing post while casting completed all as specified and directed

S&F round steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia complete all as specified and as directed.

Prepairing new steel surfaces n. exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling timber or frame work fillets, rails, posts, rafters, purlins, etc under 40 Sqcm in section etc complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nanital or similar pattern roof covering complete all as specifed and directed

S&F for Pre-painted galvalume aluminium Zinc coating GI based corruagted steel sheet 0.50 mm thick of a strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an strength of 550 Mpa as in roof covering/cladding of wall, fixed with self tapping screws complete all as specified and as directed.

S&F for 0.8 mm thick plain, black mild steel sheeting in stepped flashing measured as the minimum rectangle from which the pieces can be cut complete all as specified and as directed.

S&F for steel work in tubular works (round or square)/angle including special shaped washer etc complete using ERW or induction butt welded tubes as in verticle posts, trusses, purlins (Beam, tee, angle, channel, flat, sections) including distance pieces, cleats etc confirming to IS-1161-1979 grade St-240 complete all as specirfied and directed

S&F for steel work Fe-410-W(GdeE-250) quality in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed

S&F for Mild steel screw bolts (machine made) length of bolt exc 22.5cm and n. exc 30cm long with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc 5cm long complete all as specified and as directed.

S&F for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n. exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed. Note:Brackets over 10 kg each to be measured under 'Structural Steel

M&L for preparation of new steel surface of any description over 10 cm width or girth not otherwise describe and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub-base finished even and fair complete all as specified and as directed.

M&L in repairs for factory made machine pressed precast concrete rubber moulded interlocking paver block and shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade fixed with grey cement and pigment etc compelete all as specifed and directed

All as per item No 35 above but except tiles

M&L for sand filling under floor/cushioning etc complete all as specified and directed.

M&L precast cement concrete, type B1, 1:2:4 in window or door cills, lintels bressumers, steps, quoin blocks (for use with masonary) string courses, coping, kneelers, apex stones, piers caps etc and setting in mortar joints to match complete all as specified and as directed.

M&L for preparing Old plastered or unplastered surface of walls and applying one coat of 100 % acrylic anti fungal paint complete all as specified and directed

M&L for preparing old plastered or unplastered surfaces of walls and applying one coat of 100 % acrylic anti fungal paint in approved camouflaged pattern complete all as specified and as directed.

M&L for preparation of old painted surface of steel of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 15 mm thick screed bed or bedding layer cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of same etc complete as specified and directed

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M&L for preparation of new or primarily untreated concrete/plastered surface of Kerb stone and applying two coats of synthetic enamel paint white or coloured tinted over one coat of primer etc complete all as specified and directed

M&L for preparation of old painted concrete/plastered surfaces of kerb stone and applying one coat of synthetic enamel paint, white or coloured/tinted etc complete all as specified and directed

Demolition of RCC Jallies/trellis work (Jafri) including taking as under of battens in trellis (Posts and rails measured seperately) complete all as specified and as directed.

M&L for providing precast concrete type B0, 1:2:4 (12.5 mm graded aggregate) as in louvers and Jallies 40 mm thick and set in cement mortar 1:6 complete all as specified and directed

M&L for PCC, 100 mm thick, type B-2 (1:2:4) (40 mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed

M&L for excavation/desludging/desilting as in liquid/dry mud/foul conditions of any depth and cross section width 0.50 m to 1.20 m getting out from existing drain and cleaning the shurbs/grass from sides of frain including removing existing RCC cover slab of any size and thickness and resetting in the same position and removing the sludge outside the defence land in covered container complete all as specified and directed.

Hari Construction

Venus Engineering

Komal Construction

KALIKAY ENTERPRISES

TAKHUBHA KANUBHA JADEJA

NEELKANTHA ASSOCIATE