Loading
Loading…
Loading…
Tender ID
Tender Value
₹2.2 L
EMD Value
₹4,420
Closing Date
28 Mar 2026, 4:00 pmClosed
Executive Engineer
PWD RnB Division Rajouri
Construction of allied work of phc chatyar including labour room cracking wall and construction of bio medical waste p.t Balance Work
2026_PWDJK_306612_1
NIT NO 102 OF 2025-26 Dated 23-03-2026
Open Tender
Civil Works
Percentage
Rajouri
Please refer Tender documents.
3 documents required · 3 mandatory
₹600
Executive Engineer
₹4,420
23 Mar 2026
23 Mar 2026
28 Mar 2026
23 Mar 2026
28 Mar 2026
23 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0.0 | Earth work in excavatiOn by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed: | 7.2 | Cum | 256.85 | ₹1,849.32 |
| 0.0 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | 5.4 | Cum | 5,733.6 | ₹30,961.44 |
| 0.0 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required | 36 | Sqm | 968.95 | ₹34,882.2 |
| 0.0 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle etc complete job including fiiting NSi | 224 | Sft | 450 | ₹1,00,800 |
| 0.0 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required | 220 | Kg | 141.4 | ₹31,108 |
| 0.0 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. | 36 | Sqm | 545.55 | ₹19,639.8 |
| 0.0 | carriages for the materials | - | - | - | - |
| 0.0 | sand for an avg. diatance of 120 km M.T | 1.26 | Cum | 1,513.74 | ₹1,907.31 |
| 0.0 | aggregatesize below 40mm for an avg distance of 10km M.T | 2.52 | Cum | 279.04 | ₹703.18 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.51 MB
BOQ_995491.xls
BOQ • 0.31 MB
nit102.pdf
PDF • 0.78 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .