Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹29.1 LAccepted-AOC | 1 | Accepted-AOC AOC | |
| 2 | 2₹30.5 L+₹90,870 (3.07%)Rejected-AOC WANIAWAD BHUJ KUTCH 370001 | BHUJ | KUTCH | GUJARAT | 370001 | 2 | Rejected-AOC NOT L-1 | |
| 3 | 3₹32.4 L+₹2.9 L (9.65%)Rejected-AOC | 3 | Rejected-AOC NOT L-1 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
16 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY BHUJ
GE ARMY BHUJ
REPAIRES/ MAINTENANCE OF WATER AND ELECTRIC SUPPLY INSTALLATION BUILDINGS AT MIL STN BHUJ UNDER GE (A) BHUJ
2023_MES_575836_1
8979
Open Tender
Civil Works
Item Rate
180 days
ARMY AREA BHUJ
REFER TENDER
6 documents required · 6 mandatory
₹500
GE ARMY BHUJ
₹70,000
Yes
26 Mar 2023
19 Jan 2023
17 Feb 2023
19 Jan 2023
16 Feb 2023
4 Feb 2023
Amount
M&L for making good the disturbed brick/ concrete surfaces with CM 1:4, 15 mm thick and finishing the surfaces fair and smooth to match with the existing surfaces all as specified and as directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for as directed by Engr-in-Charge.
Dismantling of wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.
M&L for manufacturing of ornamental and decorative type steel gate with structural steel conforming to Fe 410-o or 310-O all as specified, revolving on bearing plate including pintal hinges fixed on pillar in PCC blocks of size as required as site , including all locking arrangement, all as per sample approved by the Engr-in-Charge and directed and fixed in position. Note :- 1. The weight of manufactured steel gate shall be decided by the BOO which will be convened by GE, before the same is fixed in position . Necessary arrangement for weighting the steel gate shall be made by the contractor at his own expense . The contractor shall quote the unit rate accordingly. 2. Steel gate shall be manufactured as per sample approved by the Engr-in-Charge . Photographs for the samples shall have to be collected by the contractor from the manufacturer of the gates in the area for approval of the Engr-in-charge. The cost of the same shall be deemed to be inclusive in unit rate accordingly.
Excavation in post holes or similar holes n.exc 0.5 cum each in soft/ loose soil , getting out returning filling in and ramming with earth or broken rubble around in layers n.exc 25 cm watering etc and removing surplus soil to 50 m distance and making good surface complete all as specified and directed.
M&L for providing precast cement concrete type B1 1:2:4 (20 mm graded aggregate) in apex stone/kerb stone with plain fair faces including chamfers, weathering throating etc and set in CM 1:4 complete with joints, size and shape as approved by Engr-in-charge
M&L for precast RCC 1:2:4 type B-1 as in cover slab or similar works set & jointed in CM 1:4 complete including necessary formwork all as specified and directed.
M&L for exterior grade, coloured, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick (ULTRA or equivalent.) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specified and directed.
M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.
M&L for 80 mm thick paver blocks rubber moulded PCC M-40 with grey cement and pigment conforming to IS-15658-2006 including consolidation with mechanically vibrators etc over and including 25mm thick coarse sand cushion over PCC sub base as directed. Note - PCC sub base will be measured and paid for separately.
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in as in sub base all as specified and directed.
M&L for 100 mm thick PCC 1:2:4 type B2, (using 40 mm graded stone aggregate) as in floors/paving finish even and smooth without using extra cement . complete all as specified.
M&L for forming expansion joints,12 mm thick in concrete slab of thickness of 100 mm and filled with preformed bituminous filler and top 30 mm primed with sealing compound Grade A. complete all as specified and directed.
M&L for forming contraction (Dummy) joints 65 mm deep x 10 mm wide filling with sealing compound grade A
M&L for aggregate for loose filling, of gauge 20 mm to 60 mm gradedSpreading and levelling in layers n exc. 10cm thick
M&L for preparing the existing surface by cleaning thoroughly to make it smooth and free from any foreign matter such as fungus, moss, dust etc by wire brushing and dusting and applying a coat of bitumenous primer conforming to IS : 3384 - 1986 @ 0.30 litre / Sqm and then pressing & laying 3mm thick Atactic Polypropylene Polymer (APP) modified prefabricated with non woven polyester reinforcement five layer water proofing membrane weighing not less than 3.50 Kg/ Sqm comprising of centre core of 160 - 170gsm non - woven polyster matt sandwitched on both sides by APP polymer modified bitumen duly protected on both sides by 20 micron HMHDPE film by torch on application with gas welding torch (Butane torch), and thereover applying a tack coat of 85/25 blown grade bitumen conforming to IS : 702 @ 1.20 Kg / Sqm and finish the top surfaces with aluminium paint (Super Silver Shield) @ 0.150 Ltr / Sqm complete all as specified. as per manufacturer's instructions and as directed. Note :- The WPT work shall be got done through manufacturer's authorised applicator only under strict supervision of manufacturer's technical representative.
S&F for factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Taking down cement plaster of any description and in any position of brick/concrete surfaces on walls / celing etc. including racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster and disposing off the rubbish off the premises of cantonment complete all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick/concrete surfaces in CM 1:4 finished even and smooth without using extra cement mixed with water proofing compound (Note :- WPC shall be measured & paid separately)
M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.
M&L for 10 mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed.
Supply only Integral waterproofing compound.
Providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth
M&L for preparation of the newly plastered surfaces of walls & applying two coats distemper oil- emulsion , white or tinted over a coat of primer surfaces of wall complete all as specified and directed.
All as per item no 24 above but three coat of white wash on ceiling.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces with smart painting tools complete all as specified and directed.
M&L for Preparation of old surfaces by complete removal of existing treatment and applying two coats of oil bound distemper over one coat of primer on walls complete all as specified and directed
All as per item no 27 above but one coat of white wash on ceiling.
M & L for completeremoval of extisting treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces
M&L for preparation of new concrete surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of primer all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide all as specified and directed.
M&L for preparation of old concrete surfaces of any description over 10 cm width or girth and applying one coats of synthetic enameled paint all as specified and directed.
M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enameled paint complete all as specified and directed.
M&L for preparation of new steel surfaces of any description n.exc 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide all as specified and directed.
M&L for preparation of old painted steel surface of any description n.exc10 cm width or girth and applying one coat of white / tinted synthetic enamel paint all as specified and directed
Dismantiling of stone slabs and tiles (Kota/ Granite stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar and M & L kota stone work 20 mm thick in floors steps, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade over & including screed bed 15mm thick in CM 1:6 including cutting recess opening for the sink portion and embedding complete all as specified and directed. (Note : No deduction shall be made for opening of sink portion and rate of cutting of hole for wash hand basin and setting the washhand basin in position shall deemed to be included in the quoted rate)
Demolition of concrete block masonry built in cement mortar or cement lime mortar
M&L for Pre-cast cement concrete block masonry (Type C1, 1:3:6, 20mm aggregate) with solid blocks, exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed.
Dismantling plain or corrugated AC or steel sheeting any guage, of any description and in any position as in roof coverings and S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with L or J hooks complete all as specified and directed.
S&F prepainted galvaluam aluminium zinc coating GI base plain sheeting steel sheet 0.50mm thick of colour as directed by GE for ridge having tensile strength of 550MPa as as in roof covring/clading to wall, with necessary rubber/PVC end cappings/closure at support fixed with self tapping screws fixed with self tapping screws complete all as spd and directed. (Note: Corrugation shape and colour of sheet shall be approved by GE)
S & F for Acrylic LED light Sign/Display board consisting of following: (i) 45mm dia MS square hollow pipe for framing embeded in cement concrete and making good. (ii) 0.5mm thick prepainted coloured galvanised steel sheet for cladding (colour approved byEngr-in-Charge). (iii) Lettrs/Symbol made up of 2.5mm thick acrylic sheet of appropriate size, colour and design as approved by GE. (iv) LED lights for Lettrs/Symbol of desired capacity and colour as approved by GE. Note : (a) Length x Height of board for 100mm wide will be decided by GE. (b) All kind of required electric work like wiring, tapping, etc upto plug point included. (c) Two coat of synthetic enamal paint over a coat of primer for all Mild Steel work included.
S & F anodised Aluminium alloy sections sliding windows with frames Series-C (20mm) and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, shutters with tinted glass 5mm thick and stainless steel wire cloth 0.35mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed.
S & F in repairs Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, white in colour hoisted and fixed in position with and including all fittings and fixtures complete all as specified and directed.
M&L for glazed ceramic tiles, coloured tiles, 450mm x 300mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.
M&L for non skid ceramic coloured tiles square / rectangular area of each tile exc 0.06 sqm but not exc 0.11 sqm and 6 - 7 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
Dismantling floor, hearth tiling of any description and in any position including cement mortar bedding (but not backing) and M&L for non skid ceramic joint free coloured matt finish tiles square / rectangular area of each tile exc 0.14 sqm but not exc 0.36 sqm and 6 - 7 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
All as above item no. 3.00 but in vertical surfaces etc. over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.
Demolitiion of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded in cement mortar all as directed.
Factory made single extruded WPC (Wood Polymer Composite) solid door/ & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S & F 150 mm long aluminum anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.
S & F aluminum alloy handles 150 mm size cast type anodized complete all as specified and directed.
S&F in repair Double action spring hinges brass, with phosphor bronze wire spring, bright polished 100mm, complete
Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
S&F aluminium alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.
S & F butt hinges 100 mm long extruded aluminium alloy with stainless steel hinge pin, anodised and fixed type B-22 complete all as specified and directed.
S & F butt hinges 100 mm long mild steel medium weight cold rolled complete all as specified and directed.
S & F 35 mm thick factory made IInd class hard wood (not less than Hollock wood) glazed and skelton shutters open rebated and prepare to receive glass / gauze etc (without sash bars) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc {size of members of shutters as specified in clause 8.24 (a) of section 8 of SSR - I} supplied and fitted to chowkat complete all as specified and directed.
Dismantiling of stone slabs and tiles of any discription or any thickness in floors, aprons, laid bedded and pointed in any mortar and M & L Granite slab work 18 to 20 mm thick in cooking platforms and like over 15mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with granite shade including cutting recess opening for the sink portion and embedding complete all as specified and directed.
All as above item no.36.00 but in skirting/dado and like over 10mm thick cement mortar 1:4 including pointing in white cement (1:2) complete all as specified and directed.
M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar works complete all as specified and as directed.
M&L 75mm thick PCC (1:3:6) type C-I (Using 20mm graded stone aggregate) as in plinth protection laid in panels incl bitumen filling in joints and finish the top surfaces even and smooth without using extra cement complete all as specified.
Providing & applying rising damp-proof costing system with single component ready to use damp- proof coating Roff Hydamp : 1. Surface preparation thoroughly brush and clean all laltance, loose particles such as dirt, grease, mortar droppings , release agents, efflorescence, bird droppings , etc. All large volds or hollow portions must be removed and re-plastered , Non - moving cracks having width upto 5 mm must be filled with polymer based brack filler. 2. APPLICATION : Apply the first coat of Dr fixit Damp guard Classic with a paint brush directly on the prepared surfaces by mixing (1 part base : 1 part hardner : 1 part of water). Allow to dry for a minimum 2-3 hrs . Apply on e part of DAMP GUARD mixed chemical and 2 parts of OPC whte cement / Birla putty and make the putty , apply putty on the entire surface area. Allow it to dry for at least 3-4 hours . Apply the Final coat of Dr Fixit Damp guard classic on the entire surface and allow the surface to air cure 48 hours proceeds for Paint.
M/s Bombay Novelty Stores
MARA CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .